path: root/drivers/net/wireless/iwlegacy/iwl-core.h

/******************************************************************************
 *
 * This file is provided under a dual BSD/GPLv2 license.  When using or
 * redistributing this file, you may do so under either license.
 *
 * GPL LICENSE SUMMARY
 *
 * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of version 2 of the GNU General Public License as
 * published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful, but
 * WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
 * USA
 *
 * The full GNU General Public License is included in this distribution
 * in the file called LICENSE.GPL.
 *
 * Contact Information:
 *  Intel Linux Wireless <ilw@linux.intel.com>
 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
 *
 * BSD LICENSE
 *
 * Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 *  * Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 *  * Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 *  * Neither the name Intel Corporation nor the names of its
 *    contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *****************************************************************************/

#ifndef __iwl_legacy_core_h__
#define __iwl_legacy_core_h__

/************************
 * forward declarations *
 ************************/
struct iwl_host_cmd;
struct iwl_cmd;


#define IWLWIFI_VERSION "in-tree:"
#define DRV_COPYRIGHT	"Copyright(c) 2003-2011 Intel Corporation"
#define DRV_AUTHOR     "<ilw@linux.intel.com>"

#define IWL_PCI_DEVICE(dev, subdev, cfg) \
	.vendor = PCI_VENDOR_ID_INTEL,  .device = (dev), \
	.subvendor = PCI_ANY_ID, .subdevice = (subdev), \
	.driver_data = (kernel_ulong_t)&(cfg)

#define TIME_UNIT		1024

#define IWL_SKU_G       0x1
#define IWL_SKU_A       0x2
#define IWL_SKU_N       0x8

#define IWL_CMD(x) case x: return #x

struct iwl_hcmd_ops {
	int (*rxon_assoc)(struct iwl_priv *priv, struct iwl_rxon_context *ctx);
	int (*commit_rxon)(struct iwl_priv *priv, struct iwl_rxon_context *ctx);
	void (*set_rxon_chain)(struct iwl_priv *priv,
			       struct iwl_rxon_context *ctx);
};

struct iwl_hcmd_utils_ops {
	u16 (*get_hcmd_size)(u8 cmd_id, u16 len);
	u16 (*build_addsta_hcmd)(const struct iwl_legacy_addsta_cmd *cmd,
								u8 *data);
	int (*request_scan)(struct iwl_priv *priv, struct ieee80211_vif *vif);
	void (*post_scan)(struct iwl_priv *priv);
};

struct iwl_apm_ops {
	int (*init)(struct iwl_priv *priv);
	void (*config)(struct iwl_priv *priv);
};

struct iwl_debugfs_ops {
	ssize_t (*rx_stats_read)(struct file *file, char __user *user_buf,
				 size_t count, loff_t *ppos);
	ssize_t (*tx_stats_read)(struct file *file, char __user *user_buf,
				 size_t count, loff_t *ppos);
	ssize_t (*general_stats_read)(struct file *file, char __user *user_buf,
				      size_t count, loff_t *ppos);
};

struct iwl_temp_ops {
	void (*temperature)(struct iwl_priv *priv);
};

struct iwl_lib_ops {
	/* set hw dependent parameters */
	int (*set_hw_params)(struct iwl_priv *priv);
	/* Handling TX */
	void (*txq_update_byte_cnt_tbl)(struct iwl_priv *priv,
					struct iwl_tx_queue *txq,
					u16 byte_cnt);
	int (*txq_attach_buf_to_tfd)(struct iwl_priv *priv,
				     struct iwl_tx_queue *txq,
				     dma_addr_t addr,
				     u16 len, u8 reset, u8 pad);
	void (*txq_free_tfd)(struct iwl_priv *priv,
			     struct iwl_tx_queue *txq);
	int (*txq_init)(struct iwl_priv *priv,
			struct iwl_tx_queue *txq);
	/* setup Rx handler */
	void (*rx_handler_setup)(struct iwl_priv *priv);
	/* alive notification after init uCode load */
	void (*init_alive_start)(struct iwl_priv *priv);
	/* check validity of rtc data address */
	int (*is_valid_rtc_data_addr)(u32 addr);
	/* 1st ucode load */
	int (*load_ucode)(struct iwl_priv *priv);

	void (*dump_nic_error_log)(struct iwl_priv *priv);
	int (*dump_fh)(struct iwl_priv *priv, char **buf, bool display);
	int (*set_channel_switch)(struct iwl_priv *priv,
				  struct ieee80211_channel_switch *ch_switch);
	/* power management */
	struct iwl_apm_ops apm_ops;

	/* power */
	int (*send_tx_power) (struct iwl_priv *priv);
	void (*update_chain_flags)(struct iwl_priv *priv);

	/* eeprom operations (as defined in iwl-eeprom.h) */
	struct iwl_eeprom_ops eeprom_ops;

	/* temperature */
	struct iwl_temp_ops temp_ops;

	struct iwl_debugfs_ops debugfs_ops;

};

struct iwl_led_ops {
	int (*cmd)(struct iwl_priv *priv, struct iwl_led_cmd *led_cmd);
};

struct iwl_legacy_ops {
	void (*post_associate)(struct iwl_priv *priv);
	void (*config_ap)(struct iwl_priv *priv);
	/* station management */
	int (*update_bcast_stations)(struct iwl_priv *priv);
	int (*manage_ibss_station)(struct iwl_priv *priv,
				   struct ieee80211_vif *vif, bool add);
};

struct iwl_ops {
	const struct iwl_lib_ops *lib;
	const struct iwl_hcmd_ops *hcmd;
	const struct iwl_hcmd_utils_ops *utils;
	const struct iwl_led_ops *led;
	const struct iwl_nic_ops *nic;
	const struct iwl_legacy_ops *legacy;
	const struct ieee80211_ops *ieee80211_ops;
};

struct iwl_mod_params {
	int sw_crypto;		/* def: 0 = using hardware encryption */
	int disable_hw_scan;	/* def: 0 = use h/w scan */
	int num_of_queues;	/* def: HW dependent */
	int disable_11n;	/* def: 0 = 11n capabilities enabled */
	int amsdu_size_8K;	/* def: 1 = enable 8K amsdu size */
	int antenna;  		/* def: 0 = both antennas (use diversity) */
	int restart_fw;		/* def: 1 = restart firmware */
};

/*
 * @led_compensation: compensate on the led on/off time per HW according
 *	to the deviation to achieve the desired led frequency.
 *	The detail algorithm is described in iwl-led.c
 * @chain_noise_num_beacons: number of beacons used to compute chain noise
 * @wd_timeout: TX queues watchdog timeout
 * @temperature_kelvin: temperature report by uCode in kelvin
 * @ucode_tracing: support ucode continuous tracing
 * @sensitivity_calib_by_driver: driver has the capability to perform
 *	sensitivity calibration operation
 * @chain_noise_calib_by_driver: driver has the capability to perform
 *	chain noise calibration operation
 */
struct iwl_base_params {
	int eeprom_size;
	int num_of_queues;	/* def: HW dependent */
	int num_of_ampdu_queues;/* def: HW dependent */
	/* for iwl_legacy_apm_init() */
	u32 pll_cfg_val;
	bool set_l0s;
	bool use_bsm;

	u16 led_compensation;
	int chain_noise_num_beacons;
	unsigned int wd_timeout;
	bool temperature_kelvin;
	const bool ucode_tracing;
	const bool sensitivity_calib_by_driver;
	const bool chain_noise_calib_by_driver;
};

/**
 * struct iwl_cfg
 * @fw_name_pre: Firmware filename prefix. The api version and extension
 *	(.ucode) will be added to filename before loading from disk. The
 *	filename is constructed as fw_name_pre<api>.ucode.
 * @ucode_api_max: Highest version of uCode API supported by driver.
 * @ucode_api_min: Lowest version of uCode API supported by driver.
 * @scan_antennas: available antenna for scan operation
 * @led_mode: 0=blinking, 1=On(RF On)/Off(RF Off)
 *
 * We enable the driver to be backward compatible wrt API version. The
 * driver specifies which APIs it supports (with @ucode_api_max being the
 * highest and @ucode_api_min the lowest). Firmware will only be loaded if
 * it has a supported API version. The firmware's API version will be
 * stored in @iwl_priv, enabling the driver to make runtime changes based
 * on firmware version used.
 *
 * For example,
 * if (IWL_UCODE_API(priv->ucode_ver) >= 2) {
 *	Driver interacts with Firmware API version >= 2.
 * } else {
 *	Driver interacts with Firmware API version 1.
 * }
 *
 * The ideal usage of this infrastructure is to treat a new ucode API
 * release as a new hardware revision. That is, through utilizing the
 * iwl_hcmd_utils_ops etc. we accommodate different command structures
 * and flows between hardware versions as well as their API
 * versions.
 *
 */
struct iwl_cfg {
	/* params specific to an individual device within a device family */