path: root/drivers/net/wireless/ath/wil6210/wil6210.h

/*
 * Copyright (c) 2012-2017 Qualcomm Atheros, Inc.
 *
 * Permission to use, copy, modify, and/or distribute this software for any
 * purpose with or without fee is hereby granted, provided that the above
 * copyright notice and this permission notice appear in all copies.
 *
 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 */

#ifndef __WIL6210_H__
#define __WIL6210_H__

#include <linux/etherdevice.h>
#include <linux/netdevice.h>
#include <linux/wireless.h>
#include <net/cfg80211.h>
#include <linux/timex.h>
#include <linux/types.h>
#include "wmi.h"
#include "wil_platform.h"

extern bool no_fw_recovery;
extern unsigned int mtu_max;
extern unsigned short rx_ring_overflow_thrsh;
extern int agg_wsize;
extern bool rx_align_2;
extern bool rx_large_buf;
extern bool debug_fw;
extern bool disable_ap_sme;

#define WIL_NAME "wil6210"

#define WIL_FW_NAME_DEFAULT "wil6210.fw"
#define WIL_FW_NAME_FTM_DEFAULT "wil6210_ftm.fw"

#define WIL_FW_NAME_SPARROW_PLUS "wil6210_sparrow_plus.fw"
#define WIL_FW_NAME_FTM_SPARROW_PLUS "wil6210_sparrow_plus_ftm.fw"

#define WIL_BOARD_FILE_NAME "wil6210.brd" /* board & radio parameters */

#define WIL_DEFAULT_BUS_REQUEST_KBPS 128000 /* ~1Gbps */
#define WIL_MAX_BUS_REQUEST_KBPS 800000 /* ~6.1Gbps */

/**
 * extract bits [@b0:@b1] (inclusive) from the value @x
 * it should be @b0 <= @b1, or result is incorrect
 */
static inline u32 WIL_GET_BITS(u32 x, int b0, int b1)
{
	return (x >> b0) & ((1 << (b1 - b0 + 1)) - 1);
}

#define WIL6210_MIN_MEM_SIZE (2 * 1024 * 1024UL)
#define WIL6210_MAX_MEM_SIZE (4 * 1024 * 1024UL)

#define WIL_TX_Q_LEN_DEFAULT		(4000)
#define WIL_RX_RING_SIZE_ORDER_DEFAULT	(10)
#define WIL_TX_RING_SIZE_ORDER_DEFAULT	(12)
#define WIL_BCAST_RING_SIZE_ORDER_DEFAULT	(7)
#define WIL_BCAST_MCS0_LIMIT		(1024) /* limit for MCS0 frame size */
/* limit ring size in range [32..32k] */
#define WIL_RING_SIZE_ORDER_MIN	(5)
#define WIL_RING_SIZE_ORDER_MAX	(15)
#define WIL6210_MAX_TX_RINGS	(24) /* HW limit */
#define WIL6210_MAX_CID		(8) /* HW limit */
#define WIL6210_NAPI_BUDGET	(16) /* arbitrary */
#define WIL_MAX_AMPDU_SIZE	(64 * 1024) /* FW/HW limit */
#define WIL_MAX_AGG_WSIZE	(32) /* FW/HW limit */
/* Hardware offload block adds the following:
 * 26 bytes - 3-address QoS data header
 *  8 bytes - IV + EIV (for GCMP)
 *  8 bytes - SNAP
 * 16 bytes - MIC (for GCMP)
 *  4 bytes - CRC
 */
#define WIL_MAX_MPDU_OVERHEAD	(62)

struct wil_suspend_count_stats {
	unsigned long successful_suspends;
	unsigned long successful_resumes;
	unsigned long failed_suspends;
	unsigned long failed_resumes;
};

struct wil_suspend_stats {
	struct wil_suspend_count_stats r_off;
	struct wil_suspend_count_stats r_on;
	unsigned long rejected_by_device; /* only radio on */
	unsigned long rejected_by_host;
};

/* Calculate MAC buffer size for the firmware. It includes all overhead,
 * as it will go over the air, and need to be 8 byte aligned
 */
static inline u32 wil_mtu2macbuf(u32 mtu)
{
	return ALIGN(mtu + WIL_MAX_MPDU_OVERHEAD, 8);
}

/* MTU for Ethernet need to take into account 8-byte SNAP header
 * to be added when encapsulating Ethernet frame into 802.11
 */
#define WIL_MAX_ETH_MTU		(IEEE80211_MAX_DATA_LEN_DMG - 8)
/* Max supported by wil6210 value for interrupt threshold is 5sec. */
#define WIL6210_ITR_TRSH_MAX (5000000)
#define WIL6210_ITR_TX_INTERFRAME_TIMEOUT_DEFAULT (13) /* usec */
#define WIL6210_ITR_RX_INTERFRAME_TIMEOUT_DEFAULT (13) /* usec */
#define WIL6210_ITR_TX_MAX_BURST_DURATION_DEFAULT (500) /* usec */
#define WIL6210_ITR_RX_MAX_BURST_DURATION_DEFAULT (500) /* usec */
#define WIL6210_FW_RECOVERY_RETRIES	(5) /* try to recover this many times */
#define WIL6210_FW_RECOVERY_TO	msecs_to_jiffies(5000)
#define WIL6210_SCAN_TO		msecs_to_jiffies(10000)
#define WIL6210_DISCONNECT_TO_MS (2000)
#define WIL6210_RX_HIGH_TRSH_INIT		(0)
#define WIL6210_RX_HIGH_TRSH_DEFAULT \
				(1 << (WIL_RX_RING_SIZE_ORDER_DEFAULT - 3))
#define WIL_MAX_DMG_AID 254 /* for DMG only 1-254 allowed (see
			     * 802.11REVmc/D5.0, section 9.4.1.8)
			     */
/* Hardware definitions begin */

/*
 * Mapping
 * RGF File      | Host addr    |  FW addr
 *               |              |
 * user_rgf      | 0x000000     | 0x880000
 *  dma_rgf      | 0x001000     | 0x881000
 * pcie_rgf      | 0x002000     | 0x882000
 *               |              |
 */

/* Where various structures placed in host address space */
#define WIL6210_FW_HOST_OFF      (0x880000UL)

#define HOSTADDR(fwaddr)        (fwaddr - WIL6210_FW_HOST_OFF)

/*
 * Interrupt control registers block
 *
 * each interrupt controlled by the same bit in all registers
 */
struct RGF_ICR {
	u32 ICC; /* Cause Control, RW: 0 - W1C, 1 - COR */
	u32 ICR; /* Cause, W1C/COR depending on ICC */
	u32 ICM; /* Cause masked (ICR & ~IMV), W1C/COR depending on ICC */
	u32 ICS; /* Cause Set, WO */
	u32 IMV; /* Mask, RW+S/C */
	u32 IMS; /* Mask Set, write 1 to set */
	u32 IMC; /* Mask Clear, write 1 to clear */
} __packed;

/* registers - FW addresses */
#define RGF_USER_USAGE_1		(0x880004)
#define RGF_USER_USAGE_6		(0x880018)
	#define BIT_USER_OOB_MODE		BIT(31)
	#define BIT_USER_OOB_R2_MODE		BIT(30)
#define RGF_USER_USAGE_8		(0x880020)
	#define BIT_USER_PREVENT_DEEP_SLEEP	BIT(0)
	#define BIT_USER_SUPPORT_T_POWER_ON_0	BIT(1)
	#define BIT_USER_EXT_CLK		BIT(2)
#define RGF_USER_HW_MACHINE_STATE	(0x8801dc)
	#define HW_MACHINE_BOOT_DONE	(0x3fffffd)
#define RGF_USER_USER_CPU_0		(0x8801e0)
	#define BIT_USER_USER_CPU_MAN_RST	BIT(1) /* user_cpu_man_rst */
#define RGF_USER_MAC_CPU_0		(0x8801fc)
	#define BIT_USER_MAC_CPU_MAN_RST	BIT(1) /* mac_cpu_man_rst */
#define RGF_USER_USER_SCRATCH_PAD	(0x8802bc)
#define RGF_USER_BL			(0x880A3C) /* Boot Loader */
#define RGF_USER_FW_REV_ID		(0x880a8c) /* chip revision */
#define RGF_USER_FW_CALIB_RESULT	(0x880a90) /* b0-7:result
						    * b8-15:signature
						    */
	#define CALIB_RESULT_SIGNATURE	(0x11)
#define RGF_USER_CLKS_CTL_0		(0x880abc)
	#define BIT_USER_CLKS_CAR_AHB_SW_SEL	BIT(1) /* ref clk/PLL */
	#define BIT_USER_CLKS_RST_PWGD	BIT(11) /* reset on "power good" */
#define RGF_USER_CLKS_CTL_SW_RST_VEC_0	(0x880b04)
#define RGF_USER_CLKS_CTL_SW_RST_VEC_1	(0x880b08)
#define RGF_USER_CLKS_CTL_SW_RST_VEC_2	(0x880b0c)
#define RGF_USER_CLKS_CTL_SW_RST_VEC_3	(0x880b10)
#define RGF_USER_CLKS_CTL_SW_RST_MASK_0	(0x880b14)
	#define BIT_HPAL_PERST_FROM_PAD	BIT(6)
	#define BIT_CAR_PERST_RST	BIT(7)
#define RGF_USER_USER_ICR		(0x880b4c) /* struct RGF_ICR */
	#define BIT_USER_USER_ICR_SW_INT_2	BIT(18)
#define RGF_USER_CLKS_CTL_EXT_SW_RST_VEC_0	(0x880c18)
#define RGF_USER_CLKS_CTL_EXT_SW_RST_VEC_1	(0x880c2c)
#define RGF_USER_SPARROW_M_4			(0x880c50) /* Sparrow */
	#define BIT_SPARROW_M_4_SEL_SLEEP_OR_REF	BIT(2)

#define RGF_DMA_EP_TX_ICR		(0x881bb4) /* struct RGF_ICR */
	#define BIT_DMA_EP_TX_ICR_TX_DONE	BIT(0)
	#define BIT_DMA_EP_TX_ICR_TX_DONE_N(n)	BIT(n+1) /* n = [0..23] */
#define RGF_DMA_EP_RX_ICR		(0x881bd0) /* struct RGF_ICR */
	#define BIT_DMA_EP_RX_ICR_RX_DONE	BIT(0)
	#define BIT_DMA_EP_RX_ICR_RX_HTRSH	BIT(1)
#define RGF_DMA_EP_MISC_ICR		(0x881bec) /* struct RGF_ICR */
	#define BIT_DMA_EP_MISC_ICR_RX_HTRSH	BIT(0)
	#define BIT_DMA_EP_MISC_ICR_TX_NO_ACT	BIT(1)
	#define BIT_DMA_EP_MISC_ICR_HALP	BIT(27)
	#define BIT_DMA_EP_MISC_ICR_FW_INT(n)	BIT(28+n) /* n = [0..3] */

/* Legacy interrupt moderation control (before Sparrow v2)*/
#define RGF_DMA_ITR_CNT_TRSH		(0x881c5c)
#define RGF_DMA_ITR_CNT_DATA		(0x881c60)
#define RGF_DMA_ITR_CNT_CRL		(0x881c64)
	#define BIT_DMA_ITR_CNT_CRL_EN		BIT(0)
	#define BIT_DMA_ITR_CNT_CRL_EXT_TICK	BIT(1)
	#define BIT_DMA_ITR_CNT_CRL_FOREVER	BIT(2)
	#define BIT_DMA_ITR_CNT_CRL_CLR		BIT(3)
	#define BIT_DMA_ITR_CNT_CRL_REACH_TRSH	BIT(4)

/* Offload control (Sparrow B0+) */
#define RGF_DMA_OFUL_NID_0		(0x881cd4)
	#define BIT_DMA_OFUL_NID_0_RX_EXT_TR_EN		BIT(0)
	#define BIT_DMA_OFUL_NID_0_TX_EXT_TR_EN		BIT(1)
	#define BIT_DMA_OFUL_NID_0_RX_EXT_A3_SRC	BIT(2)
	#define BIT_DMA_OFUL_NID_0_TX_EXT_A3_SRC	BIT(3)

/* New (sparrow v2+) interrupt moderation control */
#define RGF_DMA_ITR_TX_DESQ_NO_MOD		(0x881d40)
#define RGF_DMA_ITR_TX_CNT_TRSH			(0x881d34)
#define RGF_DMA_ITR_TX_CNT_DATA			(0x881d38)
#define RGF_DMA_ITR_TX_CNT_CTL			(0x881d3c)
	#define BIT_DMA_ITR_TX_CNT_CTL_EN		BIT(0)