/*
* drivers/net/phy/marvell.c
*
* Driver for Marvell PHYs
*
* Author: Andy Fleming
*
* Copyright (c) 2004 Freescale Semiconductor, Inc.
*
* Copyright (c) 2013 Michael Stapelberg <michael@stapelberg.de>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/unistd.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
#include <linux/spinlock.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/mii.h>
#include <linux/ethtool.h>
#include <linux/phy.h>
#include <linux/marvell_phy.h>
#include <linux/of.h>
#include <linux/io.h>
#include <asm/irq.h>
#include <linux/uaccess.h>
#define MII_MARVELL_PHY_PAGE 22
#define MII_M1011_IEVENT 0x13
#define MII_M1011_IEVENT_CLEAR 0x0000
#define MII_M1011_IMASK 0x12
#define MII_M1011_IMASK_INIT 0x6400
#define MII_M1011_IMASK_CLEAR 0x0000
#define MII_M1011_PHY_SCR 0x10
#define MII_M1011_PHY_SCR_AUTO_CROSS 0x0060
#define MII_M1145_PHY_EXT_SR 0x1b
#define MII_M1145_PHY_EXT_CR 0x14
#define MII_M1145_RGMII_RX_DELAY 0x0080
#define MII_M1145_RGMII_TX_DELAY 0x0002
#define MII_M1145_HWCFG_MODE_SGMII_NO_CLK 0x4
#define MII_M1145_HWCFG_MODE_MASK 0xf
#define MII_M1145_HWCFG_FIBER_COPPER_AUTO 0x8000
#define MII_M1145_HWCFG_MODE_SGMII_NO_CLK 0x4
#define MII_M1145_HWCFG_MODE_MASK 0xf
#define MII_M1145_HWCFG_FIBER_COPPER_AUTO 0x8000
#define MII_M1111_PHY_LED_CONTROL 0x18
#define MII_M1111_PHY_LED_DIRECT 0x4100
#define MII_M1111_PHY_LED_COMBINE 0x411c
#define MII_M1111_PHY_EXT_CR 0x14
#define MII_M1111_RX_DELAY 0x80
#define MII_M1111_TX_DELAY 0x2
#define MII_M1111_PHY_EXT_SR 0x1b
#define MII_M1111_HWCFG_MODE_MASK 0xf
#define MII_M1111_HWCFG_MODE_COPPER_RGMII 0xb
#define MII_M1111_HWCFG_MODE_FIBER_RGMII 0x3
#define MII_M1111_HWCFG_MODE_SGMII_NO_CLK 0x4
#define MII_M1111_HWCFG_MODE_COPPER_RTBI 0x9
#define MII_M1111_HWCFG_FIBER_COPPER_AUTO 0x8000
#define MII_M1111_HWCFG_FIBER_COPPER_RES 0x2000
#define MII_M1111_COPPER 0
#define MII_M1111_FIBER 1
#define MII_88E1121_PHY_MSCR_PAGE 2
#define MII_88E1121_PHY_MSCR_REG 21
#define MII_88E1121_PHY_MSCR_RX_DELAY BIT(5)
#define MII_88E1121_PHY_MSCR_TX_DELAY BIT(4)
#define MII_88E1121_PHY_MSCR_DELAY_MASK (~(0x3 << 4))
#define MII_88E1318S_PHY_MSCR1_REG 16
#define MII_88E1318S_PHY_MSCR1_PAD_ODD BIT(6)
/* Copper Specific Interrupt Enable Register */
#define MII_88E1318S_PHY_CSIER 0x12
/* WOL Event Interrupt Enable */
#define MII_88E1318S_PHY_CSIER_WOL_EIE BIT(7)
/* LED Timer Control Register */
#define MII_88E1318S_PHY_LED_PAGE 0x03
#define MII_88E1318S_PHY_LED_TCR 0x12
#define MII_88E1318S_PHY_LED_TCR_FORCE_INT BIT(15)
#define MII_88E1318S_PHY_LED_TCR_INTn_ENABLE BIT(7)
#define MII_88E1318S_PHY_LED_TCR_INT_ACTIVE_LOW BIT(11)
/* Magic Packet MAC address registers */
#define MII_88E1318S_PHY_MAGIC_PACKET_WORD2 0x17
#define MII_88E1318S_PHY_MAGIC_PACKET_WORD1 0x18
#define MII_88E1318S_PHY_MAGIC_PACKET_WORD0 0x19
#define MII_88E1318S_PHY_WOL_PAGE 0x11
#define MII_88E1318S_PHY_WOL_CTRL 0x10
#define MII_88E1318S_PHY_WOL_CTRL_CLEAR_WOL_STATUS BIT(12)
#define MII_88E1318S_PHY_WOL_CTRL_MAGIC_PACKET_MATCH_ENABLE BIT(14)
#define MII_88E1121_PHY_LED_CTRL 16
#define MII_88E1121_PHY_LED_PAGE 3
#define MII_88E1121_PHY_LED_DEF 0x0030
#define MII_M1011_PHY_STATUS 0x11
#define MII_M1011_PHY_STATUS_1000 0x8000
#define MII_M1011_PHY_STATUS_100 0x4000
#define MII_M1011_PHY_STATUS_SPD_MASK 0xc000
#define MII_M1011_PHY_STATUS_FULLDUPLEX 0x2000
#define MII_M1011_PHY_STATUS_RESOLVED 0x0800
#define MII_M1011_PHY_STATUS_LINK 0x0400
#define MII_M1116R_CONTROL_REG_MAC 21
#define MII_88E3016_PHY_SPEC_CTRL 0x10
#define MII_88E3016_DISABLE_SCRAMBLER 0x0200
#define MII_88E3016_AUTO_MDIX_CROSSOVER 0x0030
MODULE_DESCRIPTION("Marvell PHY driver");
MODULE_AUTHOR("Andy Fleming");
MODULE_LICENSE("GPL");
static int marvell_ack_interrupt(struct phy_device *phydev)
{
int err;
/* Clear the interrupts by reading the reg */
err = phy_read(phydev, MII_M1011_IEVENT);
if (err < 0)
return err;
return 0;
}
static int marvell_config_intr(struct phy_device *phydev)
{
int err;
if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
err = phy_write(phydev, MII_M1011_IMASK, MII_M1011_IMASK_INIT);
else
err = phy_write(phydev, MII_M1011_IMASK, MII_M1011_IMASK_CLEAR);
return err;
}
static int marvell_config_aneg(struct phy_device *phydev)
{
int err;
/* The Marvell PHY has an errata which requires
* that certain registers get written in order
* to restart autonegotiation */
err = phy_write(phydev, MII_BMCR, BMCR_RESET);
if (err < 0)
return err;
err = phy_write(phydev, 0x1d, 0x1f);
if (err < 0)
return err;
err = phy_write(phydev, 0x1e, 0x200c);
if (err < 0)
return err;
err = phy_write(phydev, 0x1d, 0x5);
if (err < 0)
return err;
err = phy_write(phydev, 0x1e, 0);
if (err < 0)
return err;
err = phy_write(phydev, 0x1e, 0x100);
if (err < 0)
return err;
err = phy_write(phydev, MII_M1011_PHY_SCR,
MII_M1011_PHY_SCR_AUTO_CROSS);
if (err<