/*
* Lance ethernet driver for the MIPS processor based
* DECstation family
*
*
* adopted from sunlance.c by Richard van den Berg
*
* Copyright (C) 2002, 2003, 2005, 2006 Maciej W. Rozycki
*
* additional sources:
* - PMAD-AA TURBOchannel Ethernet Module Functional Specification,
* Revision 1.2
*
* History:
*
* v0.001: The kernel accepts the code and it shows the hardware address.
*
* v0.002: Removed most sparc stuff, left only some module and dma stuff.
*
* v0.003: Enhanced base address calculation from proposals by
* Harald Koerfgen and Thomas Riemer.
*
* v0.004: lance-regs is pointing at the right addresses, added prom
* check. First start of address mapping and DMA.
*
* v0.005: started to play around with LANCE-DMA. This driver will not
* work for non IOASIC lances. HK
*
* v0.006: added pointer arrays to lance_private and setup routine for
* them in dec_lance_init. HK
*
* v0.007: Big shit. The LANCE seems to use a different DMA mechanism to
* access the init block. This looks like one (short) word at a
* time, but the smallest amount the IOASIC can transfer is a
* (long) word. So we have a 2-2 padding here. Changed
* lance_init_block accordingly. The 16-16 padding for the buffers
* seems to be correct. HK
*
* v0.008: mods to make PMAX_LANCE work. 01/09/1999 triemer
*
* v0.009: Module support fixes, multiple interfaces support, various
* bits. macro
*
* v0.010: Fixes for the PMAD mapping of the LANCE buffer and for the
* PMAX requirement to only use halfword accesses to the
* buffer. macro
*
* v0.011: Converted the PMAD to the driver model. macro
*/
#include <linux/crc32.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/if_ether.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/spinlock.h>
#include <linux/stddef.h>
#include <linux/string.h>
#include <linux/tc.h>
#include <linux/types.h>
#include <asm/addrspace.h>
#include <asm/dec/interrupts.h>
#include <asm/dec/ioasic.h>
#include <asm/dec/ioasic_addrs.h>
#include <asm/dec/kn01.h>
#include <asm/dec/machtype.h>
#include <asm/dec/system.h>
static char version[] __devinitdata =
"declance.c: v0.011 by Linux MIPS DECstation task force\n";
MODULE_AUTHOR("Linux MIPS DECstation task force");
MODULE_DESCRIPTION("DEC LANCE (DECstation onboard, PMAD-xx) driver");
MODULE_LICENSE("GPL");
#define __unused __attribute__ ((unused))
/*
* card types
*/
#define ASIC_LANCE 1
#define PMAD_LANCE 2
#define PMAX_LANCE 3
#define LE_CSR0 0
#define LE_CSR1 1
#define LE_CSR2 2
#define LE_CSR3 3
#define LE_MO_PROM 0x8000 /* Enable promiscuous mode */
#define LE_C0_ERR 0x8000 /* Error: set if BAB, SQE, MISS or ME is set */
#define LE_C0_BABL 0x4000 /* BAB: Babble: tx timeout. */
#define LE_C0_CERR 0x2000 /* SQE: Signal quality error */
#define LE_C0_MISS 0x1000 /* MISS: Missed a packet */
#define LE_C0_MERR 0x0800 /* ME: Memory error */
#define LE_C0_RINT 0x0400 /* Received interrupt */
#define LE_C0_TINT 0x0200 /* Transmitter Interrupt */
#define LE_C0_IDON 0x0100 /* IFIN: Init finished. */
#define LE_C0_INTR 0x0080 /* Interrupt or error */
#define LE_C0_INEA 0x0040 /* Interrupt enable */
#define LE_C0_RXON 0x0020 /* Receiver on */
#define LE_C0_TXON 0x0010 /* Transmitter on */
#define LE_C0_TDMD 0x0008 /* Transmitter demand */
#define LE_C0_STOP 0x0004 /* Stop the card */
#define LE_C0_STRT 0x0002 /* Start the card */
#define LE_C0_INIT 0x0001 /* Init the card */
#define LE_C3_BSWP 0x4 /* SWAP */
#define LE_C3_ACON 0x2 /* ALE Control */
#define LE_C3_BCON 0x1 /* Byte control */
/* Receive message descriptor 1 */
#define LE_R1_OWN 0x8000 /* Who owns the entry */