/* Freescale Enhanced Local Bus Controller NAND driver
*
* Copyright © 2006-2007, 2010 Freescale Semiconductor
*
* Authors: Nick Spence <nick.spence@freescale.com>,
* Scott Wood <scottwood@freescale.com>
* Jack Lan <jack.lan@freescale.com>
* Roy Zang <tie-fei.zang@freescale.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/module.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/ioport.h>
#include <linux/of_address.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/nand_ecc.h>
#include <linux/mtd/partitions.h>
#include <asm/io.h>
#include <asm/fsl_lbc.h>
#define MAX_BANKS 8
#define ERR_BYTE 0xFF /* Value returned for read bytes when read failed */
#define FCM_TIMEOUT_MSECS 500 /* Maximum number of mSecs to wait for FCM */
/* mtd information per set */
struct fsl_elbc_mtd {
struct nand_chip chip;
struct fsl_lbc_ctrl *ctrl;
struct device *dev;
int bank; /* Chip select bank number */
u8 __iomem *vbase; /* Chip select base virtual address */
int page_size; /* NAND page size (0=512, 1=2048) */
unsigned int fmr; /* FCM Flash Mode Register value */
};
/* Freescale eLBC FCM controller information */
struct fsl_elbc_fcm_ctrl {
struct nand_hw_control controller;
struct fsl_elbc_mtd *chips[MAX_BANKS];
u8 __iomem *addr; /* Address of assigned FCM buffer */
unsigned int page; /* Last page written to / read from */
unsigned int read_bytes; /* Number of bytes read during command */
unsigned int column; /* Saved column from SEQIN */
unsigned int index; /* Pointer to next byte to 'read' */
unsigned int status; /* status read from LTESR after last op */
unsigned int mdr; /* UPM/FCM Data Register value */
unsigned int use_mdr; /* Non zero if the MDR is to be set */
unsigned int oob; /* Non zero if operating on OOB data */
unsigned int counter; /* counter for the initializations */
unsigned int max_bitflips; /* Saved during READ0 cmd */
};
/* These map to the positions used by the FCM hardware ECC generator */
static int fsl_elbc_ooblayout_ecc(struct mtd_info *mtd, int section,
struct mtd_oob_region *oobregion)
{
struct nand_chip *chip = mtd_to_nand(mtd);
struct fsl_elbc_mtd *priv = nand_get_controller_data(chip);
if (section >= chip->ecc.steps)
return -ERANGE;
oobregion->offset = (16 * section) + 6;
if (priv->fmr & FMR_ECCM)
oobregion->offset += 2;
oobregion->length = chip->ecc.bytes;
return 0;
}
static int fsl_elbc_ooblayout_free(struct mtd_info *mtd, int section,
struct mtd_oob_region *oobregion)
{
struct nand_chip *chip = mtd_to_nand(mtd);
struct fsl_elbc_mtd *priv = nand_get_controller_data(chip);
if (section > chip->ecc.steps)
return -ERANGE;
if (!section) {
oobregion->offset = 0;
if (mtd->writesize > 512)
oobregion->offset++;
oobregion->length = (priv->fmr & FMR_ECCM) ? 7 : 5;
} else {
oobregion->offset = (16 * section) -
((priv->fmr & FMR_ECCM) ? 5 : 7);
if (section < chip->ecc.steps)
oobregion->length = 13;
else
oobregion->length = mtd->oobsize - oobregion->offset;
}
return 0;
}
static const struct mtd_ooblayout_ops fsl_elbc_ooblayout_ops = {
.ecc = fsl_elbc_ooblayout_ecc,
.free = fsl_elbc_ooblayout_free,
};
/*
* ELBC may use HW ECC, so that OOB offsets, that NAND core uses for bbt,
* interfere with ECC positions, that's why we implement our own descriptors.
* OOB {11, 5}, works for both SP and LP chips, with ECCM = 1 and ECCM = 0.
*/
static u8 bbt_pattern[] = {'B', 'b', 't', '0' };
static u8 mirror_pattern[] = {'1', 't', 'b', 'B' };
static struct nand_bbt_descr bbt_main_descr = {
.options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE |
NAND_BBT_2BIT | NAND_BBT_VERSION,
.offs = 11,
.len = 4,
.veroffs = 15,
.maxblocks = 4,
.pattern = bbt_pattern,
};
static struct nand_bbt_descr bbt_mirror_descr = {
.options =