1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
|
/*
* Support for SDHCI on STMicroelectronics SoCs
*
* Copyright (C) 2014 STMicroelectronics Ltd
* Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
* Contributors: Peter Griffin <peter.griffin@linaro.org>
*
* Based on sdhci-cns3xxx.c
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#include <linux/io.h>
#include <linux/of.h>
#include <linux/module.h>
#include <linux/err.h>
#include <linux/mmc/host.h>
#include <linux/reset.h>
#include "sdhci-pltfm.h"
struct st_mmc_platform_data {
struct reset_control *rstc;
struct clk *icnclk;
void __iomem *top_ioaddr;
};
/* MMCSS glue logic to setup the HC on some ST SoCs (e.g. STiH407 family) */
#define ST_MMC_CCONFIG_REG_1 0x400
#define ST_MMC_CCONFIG_TIMEOUT_CLK_UNIT BIT(24)
#define ST_MMC_CCONFIG_TIMEOUT_CLK_FREQ BIT(12)
#define ST_MMC_CCONFIG_TUNING_COUNT_DEFAULT BIT(8)
#define ST_MMC_CCONFIG_ASYNC_WAKEUP BIT(0)
#define ST_MMC_CCONFIG_1_DEFAULT \
((ST_MMC_CCONFIG_TIMEOUT_CLK_UNIT) | \
(ST_MMC_CCONFIG_TIMEOUT_CLK_FREQ) | \
(ST_MMC_CCONFIG_TUNING_COUNT_DEFAULT))
#define ST_MMC_CCONFIG_REG_2 0x404
#define ST_MMC_CCONFIG_HIGH_SPEED BIT(28)
#define ST_MMC_CCONFIG_ADMA2 BIT(24)
#define ST_MMC_CCONFIG_8BIT BIT(20)
#define ST_MMC_CCONFIG_MAX_BLK_LEN 16
#define MAX_BLK_LEN_1024 1
#define MAX_BLK_LEN_2048 2
#define BASE_CLK_FREQ_200 0xc8
#define BASE_CLK_FREQ_100 0x64
#define BASE_CLK_FREQ_50 0x32
#define ST_MMC_CCONFIG_2_DEFAULT \
(ST_MMC_CCONFIG_HIGH_SPEED | ST_MMC_CCONFIG_ADMA2 | \
ST_MMC_CCONFIG_8BIT | \
(MAX_BLK_LEN_1024 << ST_MMC_CCONFIG_MAX_BLK_LEN))
#define ST_MMC_CCONFIG_REG_3 0x408
#define ST_MMC_CCONFIG_EMMC_SLOT_TYPE BIT(28)
#define ST_MMC_CCONFIG_64BIT BIT(24)
#define ST_MMC_CCONFIG_ASYNCH_INTR_SUPPORT BIT(20)
#define ST_MMC_CCONFIG_1P8_VOLT BIT(16)
#define ST_MMC_CCONFIG_3P0_VOLT BIT(12)
#define ST_MMC_CCONFIG_3P3_VOLT BIT(8)
#define ST_MMC_CCONFIG_SUSP_RES_SUPPORT BIT(4)
#define ST_MMC_CCONFIG_SDMA BIT(0)
#define ST_MMC_CCONFIG_3_DEFAULT \
(ST_MMC_CCONFIG_ASYNCH_INTR_SUPPORT | \
ST_MMC_CCONFIG_3P3_VOLT | \
ST_MMC_CCONFIG_SUSP_RES_SUPPORT | \
ST_MMC_CCONFIG_SDMA)
#define ST_MMC_CCONFIG_REG_4 0x40c
#define ST_MMC_CCONFIG_D_DRIVER BIT(20)
#define ST_MMC_CCONFIG_C_DRIVER BIT(16)
#define ST_MMC_CCONFIG_A_DRIVER BIT(12)
#define ST_MMC_CCONFIG_DDR50 BIT(8)
#define ST_MMC_CCONFIG_SDR104 BIT(4)
#define ST_MMC_CCONFIG_SDR50 BIT(0)
#define ST_MMC_CCONFIG_4_DEFAULT 0
#define ST_MMC_CCONFIG_REG_5 0x410
#define ST_MMC_CCONFIG_TUNING_FOR_SDR50 BIT(8)
#define RETUNING_TIMER_CNT_MAX 0xf
#define ST_MMC_CCONFIG_5_DEFAULT 0
/* I/O configuration for Arasan IP */
#define ST_MMC_GP_OUTPUT 0x450
#define ST_MMC_GP_OUTPUT_CD BIT(12)
#define ST_MMC_STATUS_R 0x460
#define ST_TOP_MMC_DLY_FIX_OFF(x) (x - 0x8)
/* TOP config registers to manage static and dynamic delay */
#define ST_TOP_MMC_TX_CLK_DLY ST_TOP_MMC_DLY_FIX_OFF(0x8)
#define ST_TOP_MMC_RX_CLK_DLY ST_TOP_MMC_DLY_FIX_OFF(0xc)
/* MMC delay control register */
#define ST_TOP_MMC_DLY_CTRL ST_TOP_MMC_DLY_FIX_OFF(0x18)
#define ST_TOP_MMC_DLY_CTRL_DLL_BYPASS_CMD BIT(0)
#define ST_TOP_MMC_DLY_CTRL_DLL_BYPASS_PH_SEL BIT(1)
#define ST_TOP_MMC_DLY_CTRL_TX_DLL_ENABLE BIT(8)
#define ST_TOP_MMC_DLY_CTRL_RX_DLL_ENABLE BIT(9)
#define ST_TOP_MMC_DLY_CTRL_ATUNE_NOT_CFG_DLY BIT(10)
#define ST_TOP_MMC_START_DLL_LOCK BIT(11)
/* register to provide the phase-shift value for DLL */
#define ST_TOP_MMC_TX_DLL_STEP_DLY ST_TOP_MMC_DLY_FIX_OFF(0x1c)
#define ST_TOP_MMC_RX_DLL_STEP_DLY ST_TOP_MMC_DLY_FIX_OFF(0x20)
#define ST_TOP_MMC_RX_CMD_STEP_DLY ST_TOP_MMC_DLY_FIX_OFF(0x24)
/* phase shift delay on the tx clk 2.188ns */
#define ST_TOP_MMC_TX_DLL_STEP_DLY_VALID 0x6
#define ST_TOP_MMC_DLY_MAX 0xf
#define ST_TOP_MMC_DYN_DLY_CONF \
(ST_TOP_MMC_DLY_CTRL_TX_DLL_ENABLE | \
ST_TOP_MMC_DLY_CTRL_ATUNE_NOT_CFG_DLY | \
ST_TOP_MMC_START_DLL_LOCK)
/*
* For clock speeds greater than 90MHz, we need to check that the
* DLL procedure has finished before switching to ultra-speed modes.
*/
#define CLK_TO_CHECK_DLL_LOCK 90000000
static inline void st_mmcss_set_static_delay(void __iomem *ioaddr)
{
if (!ioaddr)
return;
writel_relaxed(0x0, ioaddr + ST_TOP_MMC_DLY_CTRL);
writel_relaxed(ST_TOP_MMC_DLY_MAX,
ioaddr + ST_TOP_MMC_TX_CLK_DLY);
}
/**
* st_mmcss_cconfig: configure the Arasan HC inside the flashSS.
* @np: dt device node.
* @host: sdhci host
* Description: this function is to configure the Arasan host controller.
* On some ST SoCs, i.e. STiH407 family, the MMC devices inside a dedicated
* flashSS sub-system which needs to be configured to be compliant to eMMC 4.5
* or eMMC4.3. This has to be done before registering the sdhci host.
*/
static void st_mmcss_cconfig(struct device_node *np, struct sdhci_host *host)
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct mmc_host *mhost = host->mmc;
u32 cconf2, cconf3, cconf4, cconf5;
if (!of_device_is_compatible(np, "st,sdhci-stih407"))
return;
cconf2 = ST_MMC_CCONFIG_2_DEFAULT;
cconf3 = ST_MMC_CCONFIG_3_DEFAULT;
cconf4 = ST_MMC_CCONFIG_4_DEFAULT;
cconf5 = ST_MMC_CCONFIG_5_DEFAULT;
writel_relaxed(ST_MMC_CCONFIG_1_DEFAULT,
host->ioaddr + ST_MMC_CCONFIG_REG_1);
/* Set clock frequency, default to 50MHz if max-frequency is not
* provided */
switch (mhost->f_max) {
case 200000000:
clk_set_rate(pltfm_host->clk, mhost->f_max);
cconf2 |= BASE_CLK_FREQ_200;
break;
case 100000000:
clk_set_rate(pltfm_host->clk, mhost->f_max);
cconf2 |= BASE_CLK_FREQ_100;
break;
default:
clk_set_rate(pltfm_host->clk, 50000000);
cconf2 |= BASE_CLK_FREQ_50;
}
writel_relaxed(cconf2, host->ioaddr + ST_MMC_CCONFIG_REG_2);
if (!mmc_card_is_removable(mhost))
cconf3 |= ST_MMC_CCONFIG_EMMC_SLOT_TYPE;
else
/* CARD _D ET_CTRL */
writel_relaxed(ST_MMC_GP_OUTPUT_CD,
host->ioaddr + ST_MMC_GP_OUTPUT);
if (mhost->caps & MMC_CAP_UHS_SDR50) {
/* use 1.8V */
cconf3 |= ST_MMC_CCONFIG_1P8_VOLT;
cconf4 |= ST_MMC_CCONFIG_SDR50;
/* Use tuning */
cconf5 |= ST_MMC_CCONFIG_TUNING_FOR_SDR50;
/* Max timeout for retuning */
cconf5 |= RETUNING_TIMER_CNT_MAX;
}
if (mhost->caps & MMC_CAP_UHS_SDR104) {
/*
* SDR104 implies the HC can support HS200 mode, so
* it's mandatory to use 1.8V
*/
cconf3 |= ST_MMC_CCONFIG_1P8_VOLT;
cconf4 |= ST_MMC_CCONFIG_SDR104;
/* Max timeout for retuning */
cconf5 |= RETUNING_TIMER_CNT_MAX;
}
if (mhost->caps & MMC_CAP_UHS_DDR50)
cconf4 |= ST_MMC_CCONFIG_DDR50;
writel_relaxed(cconf3, host->ioaddr + ST_MMC_CCONFIG_REG_3);
writel_relaxed(cconf4, host->ioaddr + ST_MMC_CCONFIG_REG_4);
writel_relaxed(cconf5, host->ioaddr + ST_MMC_CCONFIG_REG_5);
}
static inline void st_mmcss_set_dll(void __iomem *ioaddr)
{
if (!ioaddr)
return;
writel_relaxed(ST_TOP_MMC_DYN_DLY_CONF, ioaddr + ST_TOP_MMC_DLY_CTRL);
writel_relaxed(ST_TOP_MMC_TX_DLL_STEP_DLY_VALID,
ioaddr + ST_TOP_MMC_TX_DLL_STEP_DLY);
}
static int st_mmcss_lock_dll(void __iomem *ioaddr)
{
unsigned long curr, value;
unsigned long finish = jiffies + HZ;
/* Checks if the DLL procedure is finished */
do {
curr = jiffies;
value = readl(ioaddr + ST_MMC_STATUS_R);
if (value & 0x1)
return 0;
cpu_relax();
} while (!time_after_eq(curr, finish));
return -EBUSY;
}
static int sdhci_st_set_dll_for_clock(struct sdhci_host *host)
{
int ret = 0;
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct st_mmc_platform_data *pdata = sdhci_pltfm_priv(pltfm_host);
if (host->clock > CLK_TO_CHECK_DLL_LOCK) {
st_mmcss_set_dll(pdata->top_ioaddr);
ret = st_mmcss_lock_dll(host->ioaddr);
}
return ret;
}
static void sdhci_st_set_uhs_signaling(struct sdhci_host *host,
unsigned int uhs)
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct st_mmc_platform_data *pdata = sdhci_pltfm_priv(pltfm_host);
u16 ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
int ret = 0;
/* Select Bus Speed Mode for host */
ctrl_2 &= ~SDHCI_CTRL_UHS_MASK;
switch (uhs) {
/*
* Set V18_EN -- UHS modes do not work without this.
* does not change signaling voltage
*/
case MMC_TIMING_UHS_SDR12:
st_mmcss_set_static_delay(pdata->top_ioaddr);
ctrl_2 |= SDHCI_CTRL_UHS_SDR12 | SDHCI_CTRL_VDD_180;
break;
case MMC_TIMING_UHS_SDR25:
st_mmcss_set_static_delay(pdata->top_ioaddr);
ctrl_2 |= SDHCI_CTRL_UHS_SDR25 | SDHCI_CTRL_VDD_180;
break;
case MMC_TIMING_UHS_SDR50:
st_mmcss_set_static_delay(pdata->top_ioaddr);
ctrl_2 |= SDHCI_CTRL_UHS_SDR50 | SDHCI_CTRL_VDD_180;
ret = sdhci_st_set_dll_for_clock(host);
break;
case MMC_TIMING_UHS_SDR104:
case MMC_TIMING_MMC_HS200:
st_mmcss_set_static_delay(pdata->top_ioaddr);
ctrl_2 |= SDHCI_CTRL_UHS_SDR104 | SDHCI_CTRL_VDD_180;
ret = sdhci_st_set_dll_for_clock(host);
break;
case MMC_TIMING_UHS_DDR50:
case MMC_TIMING_MMC_DDR52:
st_mmcss_set_static_delay(pdata->top_ioaddr);
ctrl_2 |= SDHCI_CTRL_UHS_DDR50 | SDHCI_CTRL_VDD_180;
break;
}
if (ret)
dev_warn(mmc_dev(host->mmc), "Error setting dll for clock "
"(uhs %d)\n", uhs);
dev_dbg(mmc_dev(host->mmc), "uhs %d, ctrl_2 %04X\n", uhs, ctrl_2);
sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2);
}
static u32 sdhci_st_readl(struct sdhci_host *host, int reg)
{
u32 ret;
switch (reg) {
case SDHCI_CAPABILITIES:
ret = readl_relaxed(host->i
|