1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
|
/*
* Touchscreen driver for UCB1x00-based touchscreens
*
* Copyright (C) 2001 Russell King, All Rights Reserved.
* Copyright (C) 2005 Pavel Machek
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* 21-Jan-2002 <jco@ict.es> :
*
* Added support for synchronous A/D mode. This mode is useful to
* avoid noise induced in the touchpanel by the LCD, provided that
* the UCB1x00 has a valid LCD sync signal routed to its ADCSYNC pin.
* It is important to note that the signal connected to the ADCSYNC
* pin should provide pulses even when the LCD is blanked, otherwise
* a pen touch needed to unblank the LCD will never be read.
*/
#include <linux/config.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/smp.h>
#include <linux/smp_lock.h>
#include <linux/sched.h>
#include <linux/completion.h>
#include <linux/delay.h>
#include <linux/string.h>
#include <linux/input.h>
#include <linux/device.h>
#include <linux/suspend.h>
#include <linux/slab.h>
#include <linux/kthread.h>
#include <asm/dma.h>
#include <asm/semaphore.h>
#include <asm/arch/collie.h>
#include <asm/mach-types.h>
#include "ucb1x00.h"
struct ucb1x00_ts {
struct input_dev *idev;
struct ucb1x00 *ucb;
wait_queue_head_t irq_wait;
struct task_struct *rtask;
u16 x_res;
u16 y_res;
unsigned int restart:1;
unsigned int adcsync:1;
};
static int adcsync;
static inline void ucb1x00_ts_evt_add(struct ucb1x00_ts *ts, u16 pressure, u16 x, u16 y)
{
struct input_dev *idev = ts->idev;
input_report_abs(idev, ABS_X, x);
input_report_abs(idev, ABS_Y, y);
input_report_abs(idev, ABS_PRESSURE, pressure);
input_sync(idev);
}
static inline void ucb1x00_ts_event_release(struct ucb1x00_ts *ts)
{
struct input_dev *idev = ts->idev;
input_report_abs(idev, ABS_PRESSURE, 0);
input_sync(idev);
}
/*
* Switch to interrupt mode.
*/
static inline void ucb1x00_ts_mode_int(struct ucb1x00_ts *ts)
{
ucb1x00_reg_write(ts->ucb, UCB_TS_CR,
UCB_TS_CR_TSMX_POW | UCB_TS_CR_TSPX_POW |
UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_GND |
UCB_TS_CR_MODE_INT);
}
/*
* Switch to pressure mode, and read pressure. We don't need to wait
* here, since both plates are being driven.
*/
static inline unsigned int ucb1x00_ts_read_pressure(struct ucb1x00_ts *ts)
{
if (machine_is_collie()) {
ucb1x00_io_write(ts->ucb, COLLIE_TC35143_GPIO_TBL_CHK, 0);
ucb1x00_reg_write(ts->ucb, UCB_TS_CR,
UCB_TS_CR_TSPX_POW | UCB_TS_CR_TSMX_POW |
UCB_TS_CR_MODE_POS | UCB_TS_CR_BIAS_ENA);
udelay(55);
return ucb1x00_adc_read(ts->ucb, UCB_ADC_INP_AD2, ts->adcsync);
} else {
ucb1x00_reg_write(ts->ucb, UCB_TS_CR,
UCB_TS_CR_TSMX_POW | UCB_TS_CR_TSPX_POW |
UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_GND |
UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
return ucb1x00_adc_read(ts->ucb, UCB_ADC_INP_TSPY, ts->adcsync);
}
}
/*
* Switch to X position mode and measure Y plate. We switch the plate
* configuration in pressure mode, then switch to position mode. This
* gives a faster response time. Even so, we need to wait about 55us
* for things to stabilise.
*/
static inline unsigned int ucb1x00_ts_read_xpos(struct ucb1x00_ts *ts)
{
if (machine_is_collie())
ucb1x00_io_write(ts->ucb, 0, COLLIE_TC35143_GPIO_TBL_CHK);
else {
ucb1x00_reg_write(ts->ucb, UCB_TS_CR,
UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW |
UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
ucb1x00_reg_write(ts->ucb, UCB_TS_CR,
UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW |
UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
}
ucb1x00_reg_write(ts->ucb, UCB_TS_CR,
UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW |
UCB_TS_CR_MODE_POS | UCB_TS_CR_BIAS_ENA);
udelay(55);
return ucb1x00_adc_read(ts->ucb, UCB_ADC_INP_TSPY, ts->adcsync);
}
/*
* Switch to Y position mode and measure X plate. We switch the plate
* configuration in pressure mode, then switch to position mode. This
* gives a faster response time. Even so, we need to wait about 55us
* for things to stabilise.
*/
static inline unsigned int ucb1x00_ts_read_ypos(struct ucb1x00_ts *ts)
{
if (machine_is_collie())
ucb1x00_io_write(ts->ucb, 0, COLLIE_TC35143_GPIO_TBL_CHK);
else {
ucb1x00_reg_write(ts->ucb, UCB_TS_CR,
UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW |
UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
ucb1x00_reg_write(ts->ucb, UCB_TS_CR,
UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW |
UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
}
ucb1x00_reg_write(ts->ucb, UCB_TS_CR,
UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW |
UCB_TS_CR_MODE_POS | UCB_TS_CR_BIAS_ENA);
udelay(55);
return ucb1x00_adc_read(ts->ucb, UCB_ADC_INP_TSPX, ts->adcsync);
}
/*
* Switch to X plate resistance mode. Set MX to ground, PX to
* supply. Measure current.
*/
static inline unsigned int ucb1x00_ts_read_xres(struct ucb1x00_ts *ts)
{
ucb1x00_reg_write(ts->ucb, UCB_TS_CR,
UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW |
UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
return ucb1x00_adc_read(ts->ucb, 0, ts->adcsync);
}
/*
* Switch to Y plate resistance mode. Set MY to ground, PY to
* supply. Measure current.
*/
static inline unsigned int ucb1x00_ts_read_yres(struct ucb1x00_ts *ts)
{
ucb1x00_reg_write(ts->ucb, UCB_TS_CR,
UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW |
UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
return ucb1x00_adc_read(ts->ucb, 0, ts->adcsync);
}
static inline int ucb1x00_ts_pen_down(struct ucb1x00_ts *ts)
{
unsigned int val = ucb1x00_reg_read(ts->ucb, UCB_TS_CR);
if (machine_is_collie())
return (!(val & (UCB_TS_CR_TSPX_LOW)));
else
return (val & (UCB_TS_CR_TSPX_LOW | UCB_TS_CR_TSMX_LOW));
}
/*
* This is a RT kernel thread that handles the ADC accesses
* (mainly so we can use semaphores in the UCB1200 core code
* to serialise accesses to the ADC).
*/
static int ucb1x00_thread(void *_ts)
{
struct ucb1x00_ts *ts = _ts;
struct task_struct *tsk = current;
DECLARE_WAITQUEUE(wait, tsk);
int valid;
/*
* We could run as a real-time thread. However, thus far
* this doesn't seem to be necessary.
*/
// tsk->policy = SCHED_FIFO;
// tsk->rt_priority = 1;
valid = 0;
add_wait_queue(&ts->irq_wait, &wait);
while (!kthread_should_stop()) {
unsigned int x, y, p;
signed long timeout;
ts->restart = 0;
ucb1x00_adc_enable(ts->ucb);
x = ucb1x00_ts_read_xpos(ts);
y = ucb1x00_ts_read_ypos(ts);
p = ucb1x00_ts_read_pressure(ts);
/*
* Switch back to interrupt mode.
*/
ucb1x00_ts_mode_int(ts);
ucb1x00_adc_disable(ts->ucb);
msleep(10);
ucb1x00_enable(ts->ucb);
if (ucb1x00_ts_pen_down(ts)) {
set_task_state(tsk, TASK_INTERRUPTIBLE);
ucb1x00_enable_irq(ts->ucb, UCB_IRQ_TSPX, machine_is_collie() ? UCB_RISING : UCB_FALLING);
ucb1x00_disable(ts->ucb);
/*
* If we spat out a valid sample set last time,
* spit out a "pen off" sample here.
*/
if (valid) {
ucb1x00_ts_event_release(ts);
valid = 0;
}
timeout = MAX_SCHEDULE_TIMEOUT;
} else {
ucb1x00_disable(ts->ucb);
/*
* Filtering is policy. Policy belongs in user
* space. We therefore leave it to user space
* to do any filtering they please.
*/
if (!ts->restart) {
ucb1x00_ts_evt_add(ts, p, x, y);
valid = 1;
}
set_task_state(tsk, TASK_INTERRUPTIBLE);
timeout = HZ / 100;
}
try_to_freeze();
schedule_timeout(timeout);
}
remove_wait_queue(&ts->irq_wait, &wait);
ts->rtask = NULL;
return 0;
}
/*
* We only detect touch screen _touches_ with this interrupt
* handler, and even then we just schedule our task.
*/
static void ucb1x00_ts_irq(int idx, void *id)
{
struct ucb1x00_ts *ts = id;
ucb1x00_disable_irq(ts->ucb, UCB_IRQ_TSPX, UCB_FALLING);
wake_up(&ts->irq_wait);
}
static int ucb1x00_ts_open(struct input_dev *idev)
{
struct ucb1x00_ts *ts = idev->private;
int ret = 0;
BUG_ON(ts->rtask);
init_waitqueue_head(&ts->irq_wait);
ret = ucb1x00_hook_irq(ts
|