// SPDX-License-Identifier: GPL-2.0
/*
* Driver for Renesas R-Car MIPI CSI-2 Receiver
*
* Copyright (C) 2018 Renesas Electronics Corp.
*/
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/of_graph.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/reset.h>
#include <linux/sys_soc.h>
#include <media/v4l2-ctrls.h>
#include <media/v4l2-device.h>
#include <media/v4l2-fwnode.h>
#include <media/v4l2-mc.h>
#include <media/v4l2-subdev.h>
struct rcar_csi2;
/* Register offsets and bits */
/* Control Timing Select */
#define TREF_REG 0x00
#define TREF_TREF BIT(0)
/* Software Reset */
#define SRST_REG 0x04
#define SRST_SRST BIT(0)
/* PHY Operation Control */
#define PHYCNT_REG 0x08
#define PHYCNT_SHUTDOWNZ BIT(17)
#define PHYCNT_RSTZ BIT(16)
#define PHYCNT_ENABLECLK BIT(4)
#define PHYCNT_ENABLE_3 BIT(3)
#define PHYCNT_ENABLE_2 BIT(2)
#define PHYCNT_ENABLE_1 BIT(1)
#define PHYCNT_ENABLE_0 BIT(0)
/* Checksum Control */
#define CHKSUM_REG 0x0c
#define CHKSUM_ECC_EN BIT(1)
#define CHKSUM_CRC_EN BIT(0)
/*
* Channel Data Type Select
* VCDT[0-15]: Channel 1 VCDT[16-31]: Channel 2
* VCDT2[0-15]: Channel 3 VCDT2[16-31]: Channel 4
*/
#define VCDT_REG 0x10
#define VCDT2_REG 0x14
#define VCDT_VCDTN_EN BIT(15)
#define VCDT_SEL_VC(n) (((n) & 0x3) << 8)
#define VCDT_SEL_DTN_ON BIT(6)
#define VCDT_SEL_DT(n) (((n) & 0x3f) << 0)
/* Frame Data Type Select */
#define FRDT_REG 0x18
/* Field Detection Control */
#define FLD_REG 0x1c
#define FLD_FLD_NUM(n) (((n) & 0xff) << 16)
#define FLD_FLD_EN4 BIT(3)
#define FLD_FLD_EN3 BIT(2)
#define FLD_FLD_EN2 BIT(1)
#define FLD_FLD_EN BIT(0)
/* Automatic Standby Control */
#define ASTBY_REG 0x20
/* Long Data Type Setting 0 */
#define LNGDT0_REG 0x28
/* Long Data Type Setting 1 */
#define LNGDT1_REG 0x2c
/* Interrupt Enable */
#define INTEN_REG 0x30
/* Interrupt Source Mask */
#define INTCLOSE_REG 0x34
/* Interrupt Status Monitor */
#define INTSTATE_REG 0x38
#define INTSTATE_INT_ULPS_START BIT(7)
#define INTSTATE_INT_ULPS_END BIT(6)
/* Interrupt Error Status Monitor */
#define INTERRSTATE_REG 0x3c
/* Short Packet Data */
#define SHPDAT_REG 0x40
/* Short Packet Count */
#define SHPCNT_REG 0x44
/* LINK Operation Control */
#define LINKCNT_REG 0x48
#define LINKCNT_MONITOR_EN BIT(31)
#define LINKCNT_REG_MONI_PACT_EN BIT(25)
#define LINKCNT_ICLK_NONSTOP BIT(24)
/* Lane Swap */
#define LSWAP_REG 0x4c
#define LSWAP_L3SEL(n) (((n) & 0x3) << 6)
#define LSWAP_L2SEL(n) (((n) & 0x3) << 4)
#define LSWAP_L1SEL(n) (((n) & 0x3) << 2)
#define LSWAP_L0SEL(n) (((n) & 0x3) << 0)
/* PHY Test Interface Write Register */
#define PHTW_REG 0x50
#define PHTW_DWEN BIT(24)
#define PHTW_TESTDIN_DATA(n) (((n & 0xff)) << 16)
#define PHTW_CWEN BIT(8)
#define PHTW_TESTDIN_CODE(n) ((n & 0xff))
struct phtw_value {
u16 data;
u16 code;
};
struct rcsi2_mbps_reg {
u16 mbps;
u16 reg;
};
static const struct rcsi2_mbps_reg phtw_mbps_h3_v3h_m3n[] = {
{ .mbps = 80, .reg = 0x86 },
{ .mbps = 90, .reg = 0x86 },
{ .mbps = 100, .reg = 0x87 },
{ .mbps = 110, .reg = 0x87 },
{ .mbps = 120, .reg = 0x88 },
{ .mbps = 130, .reg = 0x88 },
{ .mbps = 140, .reg = 0x89 },
{ .mbps = 150, .reg = 0x89 },
{ .mbps = 160, .reg = 0x8a },
{ .mbps = 170, .reg = 0x8a },
{ .mbps = 180, .reg = 0x8b },
{ .mbps = 190, .reg = 0x8b },
{ .mbps = 205, .reg = 0x8c },
{ .mbps = 220, .reg = 0x8d },
{ .mbps = 235, .reg = 0x8e },
{ .mbps = 250, .reg = 0x8e },
{ /* sentinel */ },
};
static const struct rcsi2_mbps_reg phtw_mbps_v3m_e3[] = {
{ .mbps = 80, .reg = 0x00 },
{ .