1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
|
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* STMicroelectronics st_lsm6dsx sensor driver
*
* Copyright 2016 STMicroelectronics Inc.
*
* Lorenzo Bianconi <lorenzo.bianconi@st.com>
* Denis Ciocca <denis.ciocca@st.com>
*/
#ifndef ST_LSM6DSX_H
#define ST_LSM6DSX_H
#include <linux/device.h>
#include <linux/iio/iio.h>
#include <linux/regulator/consumer.h>
#define ST_LSM6DS3_DEV_NAME "lsm6ds3"
#define ST_LSM6DS3H_DEV_NAME "lsm6ds3h"
#define ST_LSM6DSL_DEV_NAME "lsm6dsl"
#define ST_LSM6DSM_DEV_NAME "lsm6dsm"
#define ST_ISM330DLC_DEV_NAME "ism330dlc"
#define ST_LSM6DSO_DEV_NAME "lsm6dso"
#define ST_ASM330LHH_DEV_NAME "asm330lhh"
#define ST_LSM6DSOX_DEV_NAME "lsm6dsox"
#define ST_LSM6DSR_DEV_NAME "lsm6dsr"
#define ST_LSM6DS3TRC_DEV_NAME "lsm6ds3tr-c"
#define ST_ISM330DHCX_DEV_NAME "ism330dhcx"
#define ST_LSM9DS1_DEV_NAME "lsm9ds1-imu"
#define ST_LSM6DS0_DEV_NAME "lsm6ds0"
#define ST_LSM6DSRX_DEV_NAME "lsm6dsrx"
#define ST_LSM6DST_DEV_NAME "lsm6dst"
#define ST_LSM6DSOP_DEV_NAME "lsm6dsop"
enum st_lsm6dsx_hw_id {
ST_LSM6DS3_ID,
ST_LSM6DS3H_ID,
ST_LSM6DSL_ID,
ST_LSM6DSM_ID,
ST_ISM330DLC_ID,
ST_LSM6DSO_ID,
ST_ASM330LHH_ID,
ST_LSM6DSOX_ID,
ST_LSM6DSR_ID,
ST_LSM6DS3TRC_ID,
ST_ISM330DHCX_ID,
ST_LSM9DS1_ID,
ST_LSM6DS0_ID,
ST_LSM6DSRX_ID,
ST_LSM6DST_ID,
ST_LSM6DSOP_ID,
ST_LSM6DSX_MAX_ID,
};
#define ST_LSM6DSX_BUFF_SIZE 512
#define ST_LSM6DSX_CHAN_SIZE 2
#define ST_LSM6DSX_SAMPLE_SIZE 6
#define ST_LSM6DSX_TAG_SIZE 1
#define ST_LSM6DSX_TAGGED_SAMPLE_SIZE (ST_LSM6DSX_SAMPLE_SIZE + \
ST_LSM6DSX_TAG_SIZE)
#define ST_LSM6DSX_MAX_WORD_LEN ((32 / ST_LSM6DSX_SAMPLE_SIZE) * \
ST_LSM6DSX_SAMPLE_SIZE)
#define ST_LSM6DSX_MAX_TAGGED_WORD_LEN ((32 / ST_LSM6DSX_TAGGED_SAMPLE_SIZE) \
* ST_LSM6DSX_TAGGED_SAMPLE_SIZE)
#define ST_LSM6DSX_SHIFT_VAL(val, mask) (((val) << __ffs(mask)) & (mask))
#define ST_LSM6DSX_CHANNEL_ACC(chan_type, addr, mod, scan_idx) \
{ \
.type = chan_type, \
.address = addr, \
.modified = 1, \
.channel2 = mod, \
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \
.scan_index = scan_idx, \
.scan_type = { \
.sign = 's', \
.realbits = 16, \
.storagebits = 16, \
.endianness = IIO_LE, \
}, \
.event_spec = &st_lsm6dsx_event, \
.ext_info = st_lsm6dsx_accel_ext_info, \
.num_event_specs = 1, \
}
#define ST_LSM6DSX_CHANNEL(chan_type, addr, mod, scan_idx) \
{ \
.type = chan_type, \
.address = addr, \
.modified = 1, \
.channel2 = mod, \
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \
.scan_index = scan_idx, \
.scan_type = { \
.sign = 's', \
.realbits = 16, \
.storagebits = 16, \
.endianness = IIO_LE, \
}, \
}
struct st_lsm6dsx_reg {
u8 addr;
u8 mask;
};
struct st_lsm6dsx_sensor;
struct st_lsm6dsx_hw;
struct st_lsm6dsx_odr {
u32 milli_hz;
u8 val;
};
#define ST_LSM6DSX_ODR_LIST_SIZE 8
struct st_lsm6dsx_odr_table_entry {
struct st_lsm6dsx_reg reg;
struct st_lsm6dsx_odr odr_avl[ST_LSM6DSX_ODR_LIST_SIZE];
int odr_len;
};
struct st_lsm6dsx_fs {
u32 gain;
u8 val;
};
#define ST_LSM6DSX_FS_LIST_SIZE 4
struct st_lsm6dsx_fs_table_entry {
struct st_lsm6dsx_reg reg;
struct st_lsm6dsx_fs fs_avl[ST_LSM6DSX_FS_LIST_SIZE];
int fs_len;
};
/**
* struct st_lsm6dsx_fifo_ops - ST IMU FIFO settings
* @update_fifo: Update FIFO configuration callback.
* @read_fifo: Read FIFO callback.
* @fifo_th: FIFO threshold register info (addr + mask).
* @fifo_diff: FIFO diff status register info (addr + mask).
* @th_wl: FIFO threshold word length.
*/
struct st_lsm6dsx_fifo_ops {
int (*update_fifo)(struct st_lsm6dsx_sensor *sensor, bool enable);
int (*read_fifo)(struct st_lsm6dsx_hw *hw);
struct {
u8 addr;
u16 mask;
} fifo_th;
struct {
u8 addr;
u16 mask;
} fifo_diff;
u8 th_wl;
};
/**
* struct st_lsm6dsx_hw_ts_settings - ST IMU hw timer settings
* @timer_en: Hw timer enable register info (addr + mask).
* @hr_timer: Hw timer resolution register info (addr + mask).
* @fifo_en: Hw timer FIFO enable register info (addr + mask).
* @decimator: Hw timer FIFO decimator register info (addr + mask).
* @freq_fine: Difference in % of ODR with respect to the typical.
*/
struct st_lsm6dsx_hw_ts_settings {
struct st_lsm6dsx_reg timer_en;
struct st_lsm6dsx_reg hr_timer;
struct st_lsm6dsx_reg fifo_en;
struct st_lsm6dsx_reg decimator;
u8 freq_fine;
};
/**
* struct st_lsm6dsx_shub_settings - ST IMU hw i2c controller settings
* @page_mux: register page mux info (addr + mask).
* @master_en: master config register info (addr + mask).
* @pullup_en: i2c controller pull-up register info (addr + mask).
* @aux_sens: aux sensor register info (addr + mask).
* @wr_once: write_once register info (addr + mask).
* @emb_func: embedded function register info (addr + mask).
* @num_ext_dev: max number of slave devices.
* @shub_out: sensor hub first output register info.
* @slv0_addr: slave0 address in secondary page.
* @dw_slv0_addr: slave0 write register address in secondary page.
* @batch_en: Enable/disable FIFO batching.
* @pause: controller pause value.
*/
struct st_lsm6dsx_shub_settings {
struct st_lsm6dsx_reg page_mux;
struct {
bool sec_page;
u8 addr;
u8 mask;
} master_en;
struct {
bool sec_page;
u8 addr;
u8 mask;
} pullup_en;
struct st_lsm6dsx_reg aux_sens;
struct st_lsm6dsx_reg wr_once;
struct st_lsm6dsx_reg emb_func;
u8 num_ext_dev;
struct {
bool sec_page;
u8 addr;
} shub_out;
u8 slv0_addr;
u8 dw_slv0_addr;
u8 batch_en;
u8 pause;
};
struct st_lsm6dsx_event_settings {
struct st_lsm6dsx_reg enable_reg;
struct st_lsm6dsx_reg wakeup_reg;
u8 wakeup_src_reg;
u8 wakeup_src_status_mask;
u8 wakeup_src_z_mask;
u8 wakeup_src_y_mask;
u8 wakeup_src_x_mask;
};
enum st_lsm6dsx_ext_sensor_id {
ST_LSM6DSX_ID_MAGN,
};
/**
* struct st_lsm6dsx_ext_dev_settings - i2c controller slave settings
* @i2c_addr: I2c slave address list.
* @wai: Wai address info.
* @id: external sensor id.
* @odr_table: Output data rate of the sensor [Hz].
* @fs_table: Configured sensor sensitivity table depending on full scale.
* @temp_comp: Temperature compensation register info (addr + mask).
* @pwr_table: Power on register info (addr + mask).
* @off_canc: Offset cancellation register info (addr + mask).
* @bdu: Block data update register info (addr + mask).
* @out: Output register info.
*/
struct st_lsm6dsx_ext_dev_settings {
u8 i2c_addr[2];
struct {
u8 addr;
u8 val;
} wai;
enum st_lsm6dsx_ext_sensor_id id;
struct st_lsm6dsx_odr_table_entry odr_table;
struct st_lsm6dsx_fs_table_entry fs_table;
struct st_lsm6dsx_reg temp_comp;
struct {
struct st_lsm6dsx_reg reg;
u8 off_val;
u8 on_val;
} pwr_table;
struct st_lsm6dsx_reg off_canc;
struct st_lsm6dsx_reg bdu;
struct {
u8 addr;
u8 len;
} out;
};
/**
* struct st_lsm6dsx_settings - ST IMU sensor settings
* @reset: register address for reset.
* @boot: register address for boot.
* @bdu: register address for Block Data Update.
* @max_fifo_size: Sensor max fifo length in FIFO words.
* @id: List of hw id/device name supported by the driver configuration.
* @channels: IIO channels supported by the device.
* @irq_config: interrupts related registers.
* @drdy_mask: register info for data-ready mask (addr + mask).
* @odr_table: Hw sensors odr table (Hz + val).
* @fs_table: Hw sensors gain table (gain + val).
* @decimator: List of decimator register info (addr + mask).
* @batch: List of FIFO batching register info (addr + mask).
* @fifo_ops: Sensor hw FIFO parameters.
* @ts_settings: Hw timer related settings.
* @shub_settings: i2c controller related settings.
*/
struct st_lsm6dsx_settings {
struct st_lsm6dsx_reg reset;
struct st_lsm6dsx_reg boot;
struct st_lsm6dsx_reg bdu;
u16 max_fifo_size;
struct {
enum st_lsm6dsx_hw_id hw_id;
const char *name;
u8 wai;
} id[ST_LSM6DSX_MAX_ID];
struct {
const struct iio_chan_spec *chan;
int len;
} channels[2];
struct {
struct st_lsm6dsx_reg irq1;
struct st_lsm6dsx_reg irq2;
struct st_lsm6dsx_reg irq1_func;
struct st_lsm6dsx_reg irq2_func;
struct st_lsm6dsx_reg lir;
struct st_lsm6dsx_reg clear_on_read;
struct st_lsm6dsx_reg hla;
struct st_lsm6dsx_reg od;
} irq_config;
struct st_lsm6dsx_reg drdy_mask;
struct st_lsm6dsx_odr_table_entry odr_table[2];
struct st_lsm6dsx_fs_table_entry fs_table[2];
struct st_lsm6dsx_reg decimator[ST_LSM6DSX_MAX_ID];
struct st_lsm6dsx_reg batch[ST_LSM6DSX_MAX_ID];
struct st_lsm6dsx_fifo_ops fifo_ops;
struct st_lsm6dsx_hw_ts_settings ts_settings;
struct st_lsm6dsx_shub_settings shub_settings;
struct st_lsm6dsx_event_settings event_settings;
};
enum st_lsm6dsx_sensor_id {
ST_LSM6DSX_ID_GYRO,
ST_LSM6DSX_ID_ACC,
ST_LSM6DSX_ID_EXT0,
ST_LSM6DSX_ID_EXT1,
ST_LSM6DSX_ID_EXT2,
ST_LSM6DSX_ID_MAX,
};
enum st_lsm6dsx_fifo_mode {
ST_LSM6DSX_FIFO_BYPASS = 0x0,
ST_LSM6DSX_FIFO_CONT = 0x6,
};
/**
* struct st_lsm6dsx_sensor - ST IMU sensor instance
* @name: Sensor name.
* @id: Sensor identifier.
* @hw: Pointer to instance of struct st_lsm6dsx_hw.
* @gain: Configured sensor sensitivity.
* @odr: Output data rate of the sensor [Hz].
* @watermark: Sensor watermark level.
* @decimator: Sensor decimation factor.
* @sip: Number of samples in a given pattern.
* @ts_ref: Sensor timestamp reference for hw one.
* @ext_info: Sensor settings if it is connected to i2c controller
*/
struct st_lsm6dsx_sensor {
char name[32];
enum st_lsm6dsx_sensor_id id;
struct st_lsm6dsx_hw *hw;
u32 gain;
u32 odr;
u16 watermark;
u8 decimator;
u8 sip;
s64 ts_ref;
struct {
const struct st_lsm6dsx_ext_dev_settings *settings;
u32 slv_odr;
u8 addr;
} ext_info;
};
/**
* struct st_lsm6dsx_hw - ST IMU MEMS hw instance
* @dev: Pointer to instance of struct device (I2C or SPI).
* @regmap: Register map of the device.
* @regulators: VDD/VDDIO voltage regulators.
* @irq: Device interrupt line (I2C or SPI).
* @fifo_lock: Mutex to prevent concurrent access to the hw FIFO.
* @conf_lock: Mutex to prevent concurrent FIFO configuration update.
* @page_lock: Mutex to prevent concurrent memory page configuration.
* @suspend_mask: Suspended sensor bitmask.
* @enable_mask: Enabled sensor bitmask.
* @fifo_mask: Enabled hw FIFO bitmask.
* @ts_gain: Hw timestamp rate after internal calibration.
* @ts_sip: Total number of timestamp samples in a given pattern.
* @sip: Total number of samples (acc/gyro/ts) in a given pattern.
* @buff: Device read buffer.
* @irq_routing: pointer to interrupt routing configuration.
* @event_threshold: wakeup event threshold.
* @enable_event: enabled event bitmask.
* @iio_devs: Pointers to acc/gyro iio_dev instances.
* @settings: Pointer to the specific sensor settings in use.
* @orientation: sensor chip orientation relative to main hardware.
* @scan: Temporary buffers used to align data before iio_push_to_buffers()
*/
struct st_lsm6dsx_hw {
struct device *dev;
struct regmap *regmap;
struct regulator_bulk_data regulators[2];
int irq;
struct mutex fifo_lock;
struct mutex conf_lock;
struct mutex page_lock;
u8 suspend_mask
|