1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
|
// SPDX-License-Identifier: GPL-2.0-only
/*
* IIO driver for the Apex Embedded Systems STX104
* Copyright (C) 2016 William Breathitt Gray
*/
#include <linux/bitops.h>
#include <linux/device.h>
#include <linux/errno.h>
#include <linux/gpio/driver.h>
#include <linux/iio/iio.h>
#include <linux/iio/types.h>
#include <linux/io.h>
#include <linux/ioport.h>
#include <linux/isa.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/spinlock.h>
#define STX104_OUT_CHAN(chan) { \
.type = IIO_VOLTAGE, \
.channel = chan, \
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
.indexed = 1, \
.output = 1 \
}
#define STX104_IN_CHAN(chan, diff) { \
.type = IIO_VOLTAGE, \
.channel = chan, \
.channel2 = chan, \
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_HARDWAREGAIN) | \
BIT(IIO_CHAN_INFO_OFFSET) | BIT(IIO_CHAN_INFO_SCALE), \
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
.indexed = 1, \
.differential = diff \
}
#define STX104_NUM_OUT_CHAN 2
#define STX104_EXTENT 16
static unsigned int base[max_num_isa_dev(STX104_EXTENT)];
static unsigned int num_stx104;
module_param_hw_array(base, uint, ioport, &num_stx104, 0);
MODULE_PARM_DESC(base, "Apex Embedded Systems STX104 base addresses");
/**
* struct stx104_iio - IIO device private data structure
* @chan_out_states: channels' output states
* @base: base port address of the IIO device
*/
struct stx104_iio {
unsigned int chan_out_states[STX104_NUM_OUT_CHAN];
unsigned int base;
};
/**
* struct stx104_gpio - GPIO device private data structure
* @chip: instance of the gpio_chip
* @lock: synchronization lock to prevent I/O race conditions
* @base: base port address of the GPIO device
* @out_state: output bits state
*/
struct stx104_gpio {
struct gpio_chip chip;
spinlock_t lock;
unsigned int base;
unsigned int out_state;
};
static int stx104_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan, int *val, int *val2, long mask)
{
struct stx104_iio *const priv = iio_priv(indio_dev);
unsigned int adc_config;
int adbu;
int gain;
switch (mask) {
case IIO_CHAN_INFO_HARDWAREGAIN:
/* get gain configuration */
adc_config = inb(priv->base + 11);
gain = adc_config & 0x3;
*val = 1 << gain;
return IIO_VAL_INT;
case IIO_CHAN_INFO_RAW:
if (chan->output) {
*val = priv->chan_out_states[chan->channel];
return IIO_VAL_INT;
}
/* select ADC channel */
outb(chan->channel | (chan->channel << 4), priv->base + 2);
/* trigger ADC sample capture and wait for completion */
outb(0, priv->base);
while (inb(priv->base + 8) & BIT(7));
*val = inw(priv->base);
return IIO_VAL_INT;
case IIO_CHAN_INFO_OFFSET:
/* get ADC bipolar/unipolar configuration */
adc_config = inb(priv->base + 11);
adbu = !(adc_config & BIT(2));
*val = -32768 * adbu;
return IIO_VAL_INT;
case IIO_CHAN_INFO_SCALE:
/* get ADC bipolar/unipolar and gain configuration */
adc_config = inb(priv->base + 11);
adbu = !(adc_config & BIT(2));
gain = adc_config & 0x3;
*val = 5;
*val2 = 15 - adbu + gain;
return IIO_VAL_FRACTIONAL_LOG2;
}
return -EINVAL;
}
static int stx104_write_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan, int val, int val2, long mask)
{
struct stx104_iio *const priv = iio_priv(indio_dev);
switch (mask) {
case IIO_CHAN_INFO_HARDWAREGAIN:
/* Only four gain states (x1, x2, x4, x8) */
switch (val) {
case 1:
outb(0, priv->base + 11);
break;
case 2:
outb(1, priv->base + 11);
break;
case 4:
outb(2, priv->base + 11);
break;
case 8:
outb(3, priv->base + 11);
break;
default:
return -EINVAL;
}
return 0;
case IIO_CHAN_INFO_RAW:
if (chan->output) {
/* DAC can only accept up to a 16-bit value */
if ((unsigned int)val > 65535)
return -EINVAL;
priv->chan_out_states[chan->channel] = val;
outw(val, priv->base + 4 + 2 * chan->channel);
return 0;
}
return -EINVAL;
}
return -EINVAL;
}
static const struct iio_info stx104_info = {
.read_raw = stx104_read_raw,
.write_raw = stx104_write_raw
};
/* single-ended input channels configuration */
static const struct iio_chan_spec stx104_channels_sing[] = {
STX104_OUT_CHAN(0), STX104_OUT_CHAN(1),
STX104_IN_CHAN(0, 0), STX104_IN_CHAN(1, 0), STX104_IN_CHAN(2, 0),
STX104_IN_CHAN(3, 0), STX104_IN_CHAN(4, 0), STX104_IN_CHAN(5, 0),
STX104_IN_CHAN(6, 0), STX104_IN_CHAN(7, 0), STX104_IN_CHAN(8, 0),
STX104_IN_CHAN(9, 0), STX104_IN_CHAN(10, 0), STX104_IN_CHAN(11, 0),
STX104_IN_CHAN(12, 0), STX104_IN_CHAN(13, 0), STX104_IN_CHAN(14, 0),
STX104_IN_CHAN(15, 0)
};
/* differential input channels configuration */
static const struct iio_chan_spec stx104_channels_diff[] = {
STX104_OUT_CHAN(0), STX104_OUT_CHAN(1),
STX104_IN_CHAN(0, 1), STX104_IN_CHAN(1, 1), STX104_IN_CHAN(2, 1),
STX104_IN_CHAN(3, 1), STX104_IN_CHAN(4, 1), STX104_IN_CHAN(5, 1),
STX104_IN_CHAN(6, 1), STX104_IN_CHAN(7, 1)
};
static int stx104_gpio_get_direction(struct gpio_chip *chip,
unsigned int offset)
{
/* GPIO 0-3 are input only, while the rest are output only */
if (offset < 4)
return 1;
return 0;
}
static int stx104_gpio_direction_input(struct gpio_chip *chip,
unsigned int offset)
{
if (offset >= 4)
return -EINVAL;
return 0;
}
static int stx104_gpio_direction_output(struct gpio_chip *chip,
unsigned int offset, int value)
{
if (offset < 4)
return -EINVAL;
chip->set(chip, offset, value);
return 0;
}
static int stx104_gpio_get(struct gpio_chip *chip, unsigned int offset)
{
struct stx104_gpio *const stx104gpio = gpiochip_get_data(chip);
if (offset >= 4)
return -EINVAL;
return !!(inb(stx104gpio->base) & BIT(offset));
}
static int stx104_gpio_get_multiple(struct gpio_chip *chip, unsigned long *mask,
unsigned long *bits)
{
struct stx104_gpio *const stx104gpio = gpiochip_get_data(chip);
*bits = inb(stx104gpio->base);
return 0;
}
static void stx104_gpio_set(struct gpio_chip *chip, unsigned int offset,
int value)
{
struct stx104_gpio *const stx104gpio = gpiochip_get_data(chip);
const unsigned int mask = BIT(offset) >> 4;
unsigned long flags;
if (offset < 4)
return;
spin_lock_irqsave(&stx104gpio->lock, flags);
if (value)
stx104gpio->out_state |= mask;
else
stx104gpio->out_state &= ~mask;
outb(stx104gpio->out_state, stx104gpio->base);
spin_unlock_irqrestore(&stx104gpio->lock, flags);
}
#define STX104_NGPIO 8
static const char *stx104_names[STX104_NGPIO] = {
"DIN0", "DIN1", "DIN2", "DIN3", "DOUT0", "DOUT1", "DOUT2", "DOUT3"
};
static void stx104_gpio_set_multiple(struct gpio_chip *chip,
unsigned long *mask, unsigned long *
|