/*
* intel_idle.c - native hardware idle loop for modern Intel processors
*
* Copyright (c) 2013, Intel Corporation.
* Len Brown <len.brown@intel.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
*/
/*
* intel_idle is a cpuidle driver that loads on specific Intel processors
* in lieu of the legacy ACPI processor_idle driver. The intent is to
* make Linux more efficient on these processors, as intel_idle knows
* more than ACPI, as well as make Linux more immune to ACPI BIOS bugs.
*/
/*
* Design Assumptions
*
* All CPUs have same idle states as boot CPU
*
* Chipset BM_STS (bus master status) bit is a NOP
* for preventing entry into deep C-stats
*/
/*
* Known limitations
*
* The driver currently initializes for_each_online_cpu() upon modprobe.
* It it unaware of subsequent processors hot-added to the system.
* This means that if you boot with maxcpus=n and later online
* processors above n, those processors will use C1 only.
*
* ACPI has a .suspend hack to turn off deep c-statees during suspend
* to avoid complications with the lapic timer workaround.
* Have not seen issues with suspend, but may need same workaround here.
*
* There is currently no kernel-based automatic probing/loading mechanism
* if the driver is built as a module.
*/
/* un-comment DEBUG to enable pr_debug() statements */
#define DEBUG
#include <linux/kernel.h>
#include <linux/cpuidle.h>
#include <linux/tick.h>
#include <trace/events/power.h>
#include <linux/sched.h>
#include <linux/notifier.h>
#include <linux/cpu.h>
#include <linux/module.h>
#include <asm/cpu_device_id.h>
#include <asm/mwait.h>
#include <asm/msr.h>
#define INTEL_IDLE_VERSION "0.4.1"
#define PREFIX "intel_idle: "
static struct cpuidle_driver intel_idle_driver = {
.name = "intel_idle",
.owner = THIS_MODULE,
};
/* intel_idle.max_cstate=0 disables driver */
static int max_cstate = CPUIDLE_STATE_MAX - 1;
static unsigned int mwait_substates;
#define LAPIC_TIMER_ALWAYS_RELIABLE 0xFFFFFFFF
/* Reliable LAPIC Timer States, bit 1 for C1 etc. */
static unsigned int lapic_timer_reliable_states = (1 << 1); /* Default to only C1 */
struct idle_cpu {
struct cpuidle_state *state_table;
/*
* Hardware C-state auto-demotion may not always be optimal.
* Indicate which enable bits to clear here.
*/
unsigned long auto_demotion_disable_flags;
bool byt_auto_demotion_disable_flag;
bool disable_promotion_to_c1e;
};
static const struct idle_cpu *icpu;
static struct cpuidle_device __percpu *intel_idle_cpuidle_devices;
static int intel_idle(struct cpuidle_device *dev,
struct cpuidle_driver *drv, int index);
static void intel_idle_freeze(struct cpuidle_device *dev,
struct cpuidle_driver *drv, int index);
static int intel_idle_cpu_init(int cpu);
static struct cpuidle_state *cpuidle_state_table;
/*
* Set this flag for states where the HW flushes the TLB for us
* and so we don't need cross-calls to keep it consistent.
* If this flag is set, SW flushes the TLB, so even if the
* HW doesn't do the flushing, this flag is safe to use.
*/
#define CPUIDLE_FLAG_TLB_FLUSHED 0x10000
/*
* MWAIT takes an 8-bit "hint" in EAX "suggesting"
* the C-state (top nibble) and sub-state (bottom nibble)
* 0x00 means "MWAIT(C1)", 0x10 means "MWAIT(C2)" etc.
*
* We store the hint at the top of our "flags" for each state.
*/
#define flg2MWAIT(flags) (((flags) >> 24) & 0xFF)
#define MWAIT2flg(eax) ((eax & 0xFF) << 24)
/*
* States are indexed by the cstate number,
* which is also the index into the MWAIT hint array.
* Thus C0 is a dummy.
*/
static struct cpuidle_state nehalem_cstates[] = {
{
.name = "C1-NHM",
.desc = "MWAIT 0x00",
.flags = MWAIT2flg(0x00),
.exit_latency = 3,
.target_residency = 6,
.enter = &intel_idle,
.enter_freeze = intel_idle_freeze, },
{
.name = "C1E-NHM",