/* linux/drivers/i2c/busses/i2c-s3c2410.c
*
* Copyright (C) 2004,2005,2009 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* S3C2410 I2C Controller
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/i2c.h>
#include <linux/init.h>
#include <linux/time.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/clk.h>
#include <linux/cpufreq.h>
#include <linux/slab.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_gpio.h>
#include <linux/pinctrl/consumer.h>
#include <asm/irq.h>
#include <linux/platform_data/i2c-s3c2410.h>
/* see s3c2410x user guide, v1.1, section 9 (p447) for more info */
#define S3C2410_IICCON 0x00
#define S3C2410_IICSTAT 0x04
#define S3C2410_IICADD 0x08
#define S3C2410_IICDS 0x0C
#define S3C2440_IICLC 0x10
#define S3C2410_IICCON_ACKEN (1 << 7)
#define S3C2410_IICCON_TXDIV_16 (0 << 6)
#define S3C2410_IICCON_TXDIV_512 (1 << 6)
#define S3C2410_IICCON_IRQEN (1 << 5)
#define S3C2410_IICCON_IRQPEND (1 << 4)
#define S3C2410_IICCON_SCALE(x) ((x) & 0xf)
#define S3C2410_IICCON_SCALEMASK (0xf)
#define S3C2410_IICSTAT_MASTER_RX (2 << 6)
#define S3C2410_IICSTAT_MASTER_TX (3 << 6)
#define S3C2410_IICSTAT_SLAVE_RX (0 << 6)
#define S3C2410_IICSTAT_SLAVE_TX (1 << 6)
#define S3C2410_IICSTAT_MODEMASK (3 << 6)
#define S3C2410_IICSTAT_START (1 << 5)
#define S3C2410_IICSTAT_BUSBUSY (1 << 5)
#define S3C2410_IICSTAT_TXRXEN (1 << 4)
#define S3C2410_IICSTAT_ARBITR (1 << 3)
#define S3C2410_IICSTAT_ASSLAVE (1 << 2)
#define S3C2410_IICSTAT_ADDR0 (1 << 1)
#define S3C2410_IICSTAT_LASTBIT (1 << 0)
#define S3C2410_IICLC_SDA_DELAY0 (0 << 0)
#define S3C2410_IICLC_SDA_DELAY5 (1 << 0)
#define S3C2410_IICLC_SDA_DELAY10 (2 << 0)
#define S3C2410_IICLC_SDA_DELAY15 (3 << 0)
#define S3C2410_IICLC_SDA_DELAY_MASK (3 << 0)
#define S3C2410_IICLC_FILTER_ON (1 << 2)
/* Treat S3C2410 as baseline hardware, anything else is supported via quirks */
#define QUIRK_S3C2440 (1 << 0)
#define QUIRK_HDMIPHY (1 << 1)
#define QUIRK_NO_GPIO (1 << 2)
#define QUIRK_POLL (1 << 3)
/* Max time to wait for bus to become idle after a xfer (in us) */
#define S3C2410_IDLE_TIMEOUT 5000
/* i2c controller state */
enum s3c24xx_i2c_state {
STATE_IDLE,
STATE_START,
STATE_READ,
STATE_WRITE,
STATE_STOP
};
struct s3c24xx_i2c {
wait_queue_head_t wait;
kernel_ulong_t quirks;
unsigned int suspended:1;
struct i2c_msg *msg;
unsigned int msg_num;
unsigned int msg_idx;
unsigned int msg_ptr;
unsigned int tx_setup;
unsigned int irq;
enum s3c24xx_i2c_state state;
unsigned long clkrate;
void __iomem *regs;
struct clk *clk;
struct device *dev;
struct i2c_adapter adap;
struct s3c2410_platform_i2c *pdata;
int gpios[2];
struct pinctrl *pctrl;
#if defined(CONFIG_ARM_S3C24XX_CPUFREQ)
struct notifier_block freq_transition;
#endif
};
static struct platform_device_id