// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (c) 2016 Maxime Ripard. All rights reserved.
*/
#include <linux/clk-provider.h>
#include <linux/io.h>
#include <linux/of_address.h>
#include <linux/platform_device.h>
#include "ccu_common.h"
#include "ccu_reset.h"
#include "ccu_div.h"
#include "ccu_gate.h"
#include "ccu_mp.h"
#include "ccu_mult.h"
#include "ccu_nk.h"
#include "ccu_nkm.h"
#include "ccu_nkmp.h"
#include "ccu_nm.h"
#include "ccu_phase.h"
#include "ccu-sun50i-a64.h"
static struct ccu_nkmp pll_cpux_clk = {
.enable = BIT(31),
.lock = BIT(28),
.n = _SUNXI_CCU_MULT(8, 5),
.k = _SUNXI_CCU_MULT(4, 2),
.m = _SUNXI_CCU_DIV(0, 2),
.p = _SUNXI_CCU_DIV_MAX(16, 2, 4),
.common = {
.reg = 0x000,
.hw.init = CLK_HW_INIT("pll-cpux",
"osc24M",
&ccu_nkmp_ops,
CLK_SET_RATE_UNGATE),
},
};
/*
* The Audio PLL is supposed to have 4 outputs: 3 fixed factors from
* the base (2x, 4x and 8x), and one variable divider (the one true
* pll audio).
*
* With sigma-delta modulation for fractional-N on the audio PLL,
* we have to use specific dividers. This means the variable divider
* can no longer be used, as the audio codec requests the exact clock
* rates we support through this mechanism. So we now hard code the
* variable divider to 1. This means the clock rates will no longer
* match the clock names.
*/
#define SUN50I_A64_PLL_AUDIO_REG 0x008
static struct ccu_sdm_setting pll_audio_sdm_table[] = {
{ .rate = 22579200, .pattern = 0xc0010d84, .m = 8, .n = 7 },
{ .rate = 24576000, .pattern = 0xc000ac02, .m = 14, .n = 14 },
};
static SUNXI_CCU_NM_WITH_SDM_GATE_LOCK(pll_audio_base_clk, "pll-audio-base",
"osc24M", 0x008,
8, 7, /* N */
0, 5, /* M */
pll_audio_sdm_table, BIT(24),
0x284, BIT(31),
BIT(31), /* gate */
BIT(28), /* lock */
CLK_SET_RATE_UNGATE);
static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK_MIN_MAX(pll_video0_clk, "pll-video0",
"osc24M", 0x010,
192000000, /* Minimum rate */
1008000000, /* Maximum rate */
8, 7, /* N */
0, 4, /* M */
BIT(24), /* frac enable */
BIT(25), /* frac select */
270000000, /* frac rate 0 */
297000000, /* frac rate 1 */
BIT(31), /* gate */
BIT(28), /* lock */
CLK_SET_RATE_UNGATE);
static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_ve_clk, "pll-ve",
"osc24M", 0x018,
8, 7, /* N */
0, 4, /* M */
BIT(24), /* frac enable */
BIT(25), /* frac select */
270000000, /* frac rate 0 */
297000000, /* frac rate 1 */
BIT(31), /* gate */
BIT(28), /* lock */
CLK_SET_RATE_UNGATE);
static SUNXI_CCU_NKM_WITH_GATE_LOCK(pll_ddr0_clk, "pll-ddr0",
"osc24M", 0x020,
8, 5, /* N */
4, 2, /* K */
0, 2, /* M */
BIT(31), /* gate */
BIT(28), /* lock */
CLK_SET_RATE_UNGATE);
static struct ccu_nk pll_periph0_clk = {
.enable = BIT(31),
.lock = BIT(28),
.n = _SUNXI_CCU_MULT(8, 5),
.k = _SUNXI_CCU_MULT_MIN(4, 2, 2),
.fixed_post_div = 2,
.common = {
.reg = 0x028,
.features = CCU_FEATURE_FIXED_POSTDIV,
.hw.init = CLK_HW_INIT("pll-periph0", "osc24M",
&ccu_nk_ops, CLK_SET_RATE_UNGATE),
},
};
static struct ccu_nk pll_periph1_clk = {
.enable = BIT(31),
.lock = BIT(28),
.n = _SUNXI_CCU_MULT(8, 5),
.k = _SUNXI_CCU_MULT_MIN(4, 2, 2),
.fixed_post_div = 2,
.common = {
.reg = 0x02c,
.features = CCU_FEATURE_FIXED_POSTDIV,
.hw.init = CLK_HW_INIT("pll-periph1", "osc24M",
&ccu_nk_ops, CLK_SET_RATE_UNGATE),
},
};
static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK_MIN_MAX(pll_video1_clk, "pll-video1",
"osc24M", 0x030,
192000000, /* Minimum rate */
1008000000, /* Maximum rate */
8, 7, /* N */
0, 4, /* M */
BIT(24), /* frac enable */
BIT(25), /* frac select */
270000000, /* frac rate 0 */
297000000, /* frac rate 1 */
BIT(31), /* gate */
BIT(28), <