1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
|
/*
* IDE tuning and bus mastering support for the CS5510/CS5520
* chipsets
*
* The CS5510/CS5520 are slightly unusual devices. Unlike the
* typical IDE controllers they do bus mastering with the drive in
* PIO mode and smarter silicon.
*
* The practical upshot of this is that we must always tune the
* drive for the right PIO mode. We must also ignore all the blacklists
* and the drive bus mastering DMA information. Also to confuse matters
* further we can do DMA on PIO only drives.
*
* DMA on the 5510 also requires we disable_hlt() during DMA on early
* revisions.
*
* *** This driver is strictly experimental ***
*
* (c) Copyright Red Hat Inc 2002
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2, or (at your option) any
* later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* Documentation:
* Not publically available.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <scsi/scsi_host.h>
#include <linux/libata.h>
#define DRV_NAME "pata_cs5520"
#define DRV_VERSION "0.6.3"
struct pio_clocks
{
int address;
int assert;
int recovery;
};
static const struct pio_clocks cs5520_pio_clocks[]={
{3, 6, 11},
{2, 5, 6},
{1, 4, 3},
{1, 3, 2},
{1, 2, 1}
};
/**
* cs5520_set_timings - program PIO timings
* @ap: ATA port
* @adev: ATA device
*
* Program the PIO mode timings for the controller according to the pio
* clocking table.
*/
static void cs5520_set_timings(struct ata_port *ap, struct ata_device *adev, int pio)
{
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
int slave = adev->devno;
pio -= XFER_PIO_0;
/* Channel command timing */
pci_write_config_byte(pdev, 0x62 + ap->port_no,
(cs5520_pio_clocks[pio].recovery << 4) |
(cs5520_pio_clocks[pio].assert));
/* FIXME: should these use address ? */
/* Read command timing */
pci_write_config_byte(pdev, 0x64 + 4*ap->port_no + slave,
(cs5520_pio_clocks[pio].recovery << 4) |
(cs5520_pio_clocks[pio].assert));
/* Write command timing */
pci_write_config_byte(pdev, 0x66 + 4*ap->port_no + slave,
(cs5520_pio_clocks[pio].recovery << 4) |
(cs5520_pio_clocks[pio].assert));
}
/**
* cs5520_enable_dma - turn on DMA bits
*
* Turn on the DMA bits for this disk. Needed because the BIOS probably
* has not done the work for us. Belongs in the core SATA code.
*/
static void cs5520_enable_dma(struct ata_port *ap, struct ata_device *adev)
{
/* Set the DMA enable/disable flag */
u8 reg = ioread8(ap->ioaddr.bmdma_addr + 0x02);
reg |= 1<<(adev->devno + 5);
iowrite8(reg, ap->ioaddr.bmdma_addr + 0x02);
}
/**
* cs5520_set_dmamode - program DMA timings
* @ap: ATA port
* @adev: ATA device
*
* Program the DMA mode timings for the controller according to the pio
* clocking table. Note that this device sets the DMA timings to PIO
* mode values. This may seem bizarre but the 5520 architecture talks
* PIO mode to the disk and DMA mode to the controller so the underlying
* transfers are PIO timed.
*/
static void cs5520_set_dmamode(struct ata_port *ap, struct ata_device *adev)
{
static const int dma_xlate[3] = { XFER_PIO_0, XFER_PIO_3, XFER_PIO_4 };
cs5520_set_timings(ap, adev, dma_xlate[adev->dma_mode]);
cs5520_enable_dma(ap, adev);
}
/**
* cs5520_set_piomode - program PIO timings
* @ap: ATA port
* @adev: ATA device
*
* Program the PIO mode timings for the controller according to the pio
* clocking table. We know pio_mode will equal dma_mode because of the
* CS5520 architecture. At least once we turned DMA on and wrote a
* mode setter.
*/
static void cs5520_set_piomode(struct ata_port *ap, struct ata_device *adev)
{
cs5520_set_timings(ap, adev, adev->pio_mode);
}
static int cs5520_pre_reset(struct ata_port *ap)
{
ap->cbl = ATA_CBL_PATA40;
return ata_std_prereset(ap);
}
static void cs5520_error_handler(struct ata_port *ap)
{
return ata_bmdma_drive_eh(ap, cs5520_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
}
static struct scsi_host_template cs5520_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
.resume = ata_scsi_device_resume,
.suspend = ata_scsi_device_suspend,
};
static struct ata_port_operations cs5520_port_ops = {
.port_disable = ata_port_disable,
.set_piomode = cs5520_set_piomode,
.set_dmamode = cs5520_set_dmamode,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = cs5520_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.irq_ack = ata_irq_ack,
.port_start = ata_port_start,
};
static int __devinit cs5520_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
u8 pcicfg;
void *iomap[5];
static struct ata_probe_ent probe[2];
int ports = 0;
/* IDE port enable bits */
pci_read_config_byte(dev, 0x60, &pcicfg);
/* Check if the ATA ports are enabled */
if ((pcicfg & 3) == 0)
return -ENODEV;
if ((pcicfg & 0x40) == 0) {
printk(KERN_WARNING DRV_NAME ": DMA mode disabled. Enabling.\n");
pci_write_config_byte(dev, 0x60, pcicfg | 0x40);
}
/* Perform set up for DMA */
if (pci_enable_device_bars(dev, 1<<2)) {
printk(KERN_ERR DRV_NAME ": unable to configure BAR2.\n");
return -ENODEV;
}
pci_set_master(dev);
if (pci_set_dma_mask(dev, DMA_32BIT_MASK)) {
printk(KERN_ERR DRV_NAME ": unable to configure DMA mask.\n");
return -ENODEV;
}
if (pci_set_consistent_dma_mask(dev, DMA_32BIT_MASK)) {
printk(KERN_ERR DRV_NAME ": unable to configure consistent DMA mask.\n");
return -ENODEV;
}
/* Map IO ports */
iomap[0] = devm_ioport_map(&dev->dev, 0x1F0, 8);
iomap[1] = devm_ioport_map(&dev->dev, 0x3F6, 1);
iomap[2] = devm_ioport_map(&dev->dev, 0x170, 8);
iomap[3] = devm_ioport_map(&dev->dev, 0x376, 1);
iomap[4] = pcim_iomap(dev, 2, 0);
if (!iomap[0] || !iomap[1] || !iomap[2] || !iomap[3] || !iomap[4])
return -ENOMEM;
/* We have to do our own plumbing as the PCI setup for this
chipset is non-standard so we can't punt to the libata code */
INIT_LIST_HEAD(&probe[0].node);
probe[0].dev = pci_dev_to_dev(dev);
probe[0].port_ops = &cs5520_port_ops;
probe[0].sht = &cs5520_sht;
probe[0].pio_mask = 0x1F;
probe[0].mwdma_mask = id->driver_data;
probe[0].irq = 14;
probe[0].irq_flags = 0;
probe[0].port_flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST;
probe[0].n_ports = 1;
probe[0].port[0].cmd_addr = iomap[0];
probe[0].port[0].ctl_addr = iomap[1];
probe[0].port[0].altstatus_addr = iomap[1];
probe[0].port[0].bmdma_addr = iomap[4];
/* The secondary lurks at different addresses but is otherwise
the same beastie */
probe[1] = probe[0];
INIT_LIST_HEAD(&probe[1<
|