path: root/arch/i386/kernel/entry.S

/*
 *  linux/arch/i386/entry.S
 *
 *  Copyright (C) 1991, 1992  Linus Torvalds
 */

/*
 * entry.S contains the system-call and fault low-level handling routines.
 * This also contains the timer-interrupt handler, as well as all interrupts
 * and faults that can result in a task-switch.
 *
 * NOTE: This code handles signal-recognition, which happens every time
 * after a timer-interrupt and after each system call.
 *
 * I changed all the .align's to 4 (16 byte alignment), as that's faster
 * on a 486.
 *
 * Stack layout in 'ret_from_system_call':
 * 	ptrace needs to have all regs on the stack.
 *	if the order here is changed, it needs to be
 *	updated in fork.c:copy_process, signal.c:do_signal,
 *	ptrace.c and ptrace.h
 *
 *	 0(%esp) - %ebx
 *	 4(%esp) - %ecx
 *	 8(%esp) - %edx
 *       C(%esp) - %esi
 *	10(%esp) - %edi
 *	14(%esp) - %ebp
 *	18(%esp) - %eax
 *	1C(%esp) - %ds
 *	20(%esp) - %es
 *	24(%esp) - orig_eax
 *	28(%esp) - %eip
 *	2C(%esp) - %cs
 *	30(%esp) - %eflags
 *	34(%esp) - %oldesp
 *	38(%esp) - %oldss
 *
 * "current" is in register %ebx during any slow entries.
 */

#include <linux/config.h>
#include <linux/linkage.h>
#include <asm/thread_info.h>
#include <asm/errno.h>
#include <asm/segment.h>
#include <asm/smp.h>
#include <asm/page.h>
#include <asm/desc.h>
#include "irq_vectors.h"

#define nr_syscalls ((syscall_table_size)/4)

EBX		= 0x00
ECX		= 0x04
EDX		= 0x08
ESI		= 0x0C
EDI		= 0x10
EBP		= 0x14
EAX		= 0x18
DS		= 0x1C
ES		= 0x20
ORIG_EAX	= 0x24
EIP		= 0x28
CS		= 0x2C
EFLAGS		= 0x30
OLDESP		= 0x34
OLDSS		= 0x38

CF_MASK		= 0x00000001
TF_MASK		= 0x00000100
IF_MASK		= 0x00000200
DF_MASK		= 0x00000400 
NT_MASK		= 0x00004000
VM_MASK		= 0x00020000

#ifdef CONFIG_PREEMPT
#define preempt_stop		cli
#else
#define preempt_stop
#define resume_kernel		restore_nocheck
#endif

#define SAVE_ALL \
	cld; \
	pushl %es; \
	pushl %ds; \
	pushl %eax; \
	pushl %ebp; \
	pushl %edi; \
	pushl %esi; \
	pushl %edx; \
	pushl %ecx; \
	pushl %ebx; \
	movl $(__USER_DS), %edx; \
	movl %edx, %ds; \
	movl %edx, %es;

#define RESTORE_INT_REGS \
	popl %ebx;	\
	popl %ecx;	\
	popl %edx;	\
	popl %esi;	\
	popl %edi;	\
	popl %ebp;	\
	popl %eax

#define RESTORE_REGS	\
	RESTORE_INT_REGS; \
1:	popl %ds;	\
2:	popl %es;	\
.section .fixup,"ax";	\
3:	movl $0,(%esp);	\
	jmp 1b;		\
4:	movl $0,(%esp);	\
	jmp 2b;		\
.previous;		\
.section __ex_table,"a";\
	.align 4;	\
	.long 1b,3b;	\
	.long 2b,4b;	\
.previous


ENTRY(ret_from_fork)
	pushl %eax
	call schedule_tail
	GET_THREAD_INFO(%ebp)
	popl %eax
	jmp syscall_exit

/*
 * Return to user mode is not as complex as all this looks,
 * but we want the default path for a system call return to
 * go as quickly as possible which is why some of this is
 * less clear than it otherwise should be.
 */

	# userspace resumption stub bypassing syscall exit tracing
	ALIGN
ret_from_exception:
	preempt_stop
ret_from_intr:
	GET_THREAD_INFO(%ebp)
	movl EFLAGS(%esp), %eax		# mix EFLAGS and CS
	movb CS(%esp), %al
	testl $(VM_MASK | 3), %eax
	jz resume_kernel
ENTRY(resume_userspace)
 	cli				# make sure we don't miss an interrupt
					# setting need_resched or sigpending
					# between sampling and the iret
	movl TI_flags(%ebp), %ecx
	andl $_TIF_WORK_MASK, %ecx	# is there any work to be done on
					# int/exception return?
	jne work_pending
	jmp restore_all

#ifdef CONFIG_PREEMPT
ENTRY(resume_kernel)
	cli
	cmpl $0,TI_preempt_count(%ebp)	# non-zero preempt_count ?
	jnz restore_nocheck
need_resched:
	movl TI_flags(%ebp), %ecx	# need_resched set ?
	testb $_TIF_NEED_RESCHED, %cl
	jz restore_all
	testl $IF_MASK,EFLAGS(%esp)     # interrupts off (exception path) ?
	jz restore_all
	call preempt_schedule_irq
	jmp need_resched
#endif

/* SYSENTER_RETURN points to after the "sysenter" instruction in
   the vsyscall page.  See vsyscall-sysentry.S, which defines the symbol.  */

	# sysenter call handler stub
ENTRY(sysenter_entry)
	movl TSS_sysenter_esp0(%esp),%esp
sysenter_past_esp:
	sti
	pushl $(__USER_DS)
	pushl %ebp
	pushfl
	pushl $(__USER_CS)
	pushl $SYSENTER_RETURN

/*
 * Load the potential sixth argument from user stack.
 * Careful about security.
 */
	cmpl $__PAGE_OFFSET-3,%ebp
	jae syscall_fault
1:	movl (%ebp),%ebp
.section __ex_table,"a"
	.align 4
	.long 1b,syscall_fault
.previous

	pushl %eax
	SAVE_ALL
	GET_THREAD_INFO(%ebp)

	/* Note, _TIF_SECCOMP is bit number 8, and so it needs testw and not testb */
	testw $(_TIF_SYSCALL_EMU|_TIF_SYSCALL_TRACE|_TIF_SECCOMP|_TIF_SYSCALL_AUDIT),TI_flags(%ebp)
	jnz syscall_trace_entry
	cmpl $(nr_syscalls), %eax
	jae syscall_badsys
	call *sys_call_table(,%eax,4)
	movl %eax,EAX(%esp)
	cli
	movl TI_flags(%ebp), %ecx
	testw $_TIF_ALLWORK_MASK, %cx
	jne syscall_exit_work
/* if something modifies registers it must also disable sysexit */
	movl EIP(%esp), %edx
	movl OLDESP(%esp), %ecx
	xorl %ebp,%ebp
	sti
	sysexit


	# system call handler stub
ENTRY(system_call)
	pushl %eax			# save orig_eax
	SAVE_ALL
	GET_THREAD_INFO(%ebp)
					# system call tracing in operation / emulation
	/* Note, _TIF_SECCOMP is bit number 8, and so it needs testw and not testb */
	testw $(_TIF_SYSCALL_EMU|_TIF_SYSCALL_TRACE|_TIF_SECCOMP|_TIF_SYSCALL_AUDIT),TI_flags(%ebp)
	jnz syscall_trace_entry
	cmpl $(nr_syscalls), %eax
	jae syscall_badsys
syscall_call:
	call *sys_call_table(,%eax,4)
	movl %eax,EAX(%esp)		# store the return value
syscall_exit:
	cli				# make sure we don't miss an interrupt
					# setting need_resched or sigpending
					# between sampling and the iret
	movl TI_flags(%ebp), %ecx
	testw $_TIF_ALLWORK_MASK, %cx	# current->work
	jne syscall_exit_work

restore_all:
	movl EFLAGS(%esp), %eax		# mix EFLAGS, SS and CS
	# Warning: OLDSS(%esp) contains the wrong/random values if we
	# are returning to the kernel.
	# See comments in process.c:copy_thread() for details.
	movb OLDSS(%esp), %ah
	movb CS(%esp), %al
	andl $(VM_MASK | (4 << 8) | 3), %eax
	cmpl $((4 << 8) | 3), %eax
	je ldt_ss			# returning to user-space with LDT SS
restore_nocheck:
	RESTORE_REGS
	addl $4, %esp
1:	iret
.section .fixup,"ax"
iret_exc:
	sti
	pushl $0			# no error code
	pushl $do_iret_error
	jmp error_code
.previous
.section __ex_table,"a"
	.align 4
	.long 1b,iret_exc
.previous

ldt_ss:
	larl OLDSS(%esp), %eax
	jnz restore_nocheck
	testl $0x00400000, %eax		# returning to 32bit stack?
	jnz restore_nocheck		# allright, normal return
	/* If returning to userspace with 16bit stack,
	 * try to fix the higher word of ESP, as the CPU
	 * won't restore it.
	 * This is an "official" bug of all the x86-compatible
	 * CPUs, which we can try to work around to make
	 * dosemu and wine happy. */
	subl $8, %esp		# reserve space for switch16 pointer
	cli
	movl %esp, %eax
	/* Set up the 16bit stack frame with switch32 pointer on top,
	 * and a switch16 pointer on top of the current frame. */
	call setup_x86_bogus_stack
	RESTORE_REGS
	lss 20+4(%esp), %esp	# switch to 16bit stack
1:	iret
.section __ex_table,"a"
	.align 4
	.long 1b,iret_exc
.previous

	# perform work that needs to be done immediately before resumption
	ALIGN
work_pending:
	testb $_TIF_NEED_RESCHED, %cl
	jz work_notifysig
work_resched:
	call schedule
	cli				# make sure we don't miss an interrupt
					# setting need_resched or sigpending
					# between sampling and the iret
	movl TI_flags(%ebp), %ecx
	andl $_TIF_WORK_MASK, %ecx	# is there any work to be done other
					# than syscall tracing?