1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
|
/*
* (C) Copyright 2009, Texas Instruments, Inc. http://www.ti.com/
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
/* replicated define because linux/bitops.h cannot be included in assembly */
#define BIT(nr) (1 << (nr))
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <mach/psc.h>
#include <mach/ddr2.h>
#include "clock.h"
/* Arbitrary, hardware currently does not update PHYRDY correctly */
#define PHYRDY_CYCLES 0x1000
/* Assume 25 MHz speed for the cycle conversions since PLLs are bypassed */
#define PLL_BYPASS_CYCLES (PLL_BYPASS_TIME * 25)
#define PLL_RESET_CYCLES (PLL_RESET_TIME * 25)
#define PLL_LOCK_CYCLES (PLL_LOCK_TIME * 25)
#define DEEPSLEEP_SLEEPENABLE_BIT BIT(31)
.text
/*
* Move DaVinci into deep sleep state
*
* Note: This code is copied to internal SRAM by PM code. When the DaVinci
* wakes up it continues execution at the point it went to sleep.
* Register Usage:
* r0: contains virtual base for DDR2 controller
* r1: contains virtual base for DDR2 Power and Sleep controller (PSC)
* r2: contains PSC number for DDR2
* r3: contains virtual base DDR2 PLL controller
* r4: contains virtual address of the DEEPSLEEP register
*/
ENTRY(davinci_cpu_suspend)
stmfd sp!, {r0-r12, lr} @ save registers on stack
ldr ip, CACHE_FLUSH
blx ip
ldmia r0, {r0-r4}
/*
* Switch DDR to self-refresh mode.
*/
/* calculate SDRCR address */
ldr ip, [r0, #DDR2_SDRCR_OFFSET]
bic ip, ip, #DDR2_SRPD_BIT
orr ip, ip, #DDR2_LPMODEN_BIT
str ip, [r0, #DDR2_SDRCR_OFFSET]
ldr ip, [r0, #DDR2_SDRCR_OFFSET]
orr ip, ip, #DDR2_MCLKSTOPEN_BIT
str ip, [r0, #DDR2_SDRCR_OFFSET]
mov ip, #PHYRDY_CYCLES
1: subs ip, ip, #0x1
bne 1b
/* Disable DDR2 LPSC */
mov r7, r0
mov r0, #0x2
bl davinci_ddr_psc_config
mov r0, r7
/* Disable clock to DDR PHY */
ldr ip, [r3, #PLLDIV1]
bic ip, ip, #PLLDIV_EN
str ip, [r3, #PLLDIV1]
/* Put the DDR PLL in bypass and power down */
ldr ip, [r3, #PLLCTL]
bic ip, ip, #PLLCTL_PLLENSRC
bic ip, ip, #PLLCTL_PLLEN
str ip, [r3, #PLLCTL]
/* Wait for PLL to switch to bypass */
mov ip, #PLL_BYPASS_CYCLES
2: subs ip, ip, #0x1
bne 2b
/* Power down the PLL */
ldr ip, [r3, #PLLCTL]
orr ip, ip, #PLLCTL_PLLPWRDN
str ip, [r3, #PLLCTL]
/* Go to deep sleep */
ldr ip, [r4]
orr ip, ip, #DEEPSLEEP_SLEEPENABLE_BIT
/* System goes to sleep beyond after this instruction */
str ip, [r4]
/* Wake up from sleep */
/* Clear sleep enable */
ldr ip, [r4]
bic ip, ip, #DEEPSLEEP_SLEEPENABLE_BIT
str ip, [r4]
/* initialize the DDR PLL controller */
/* Put PLL in reset */
ldr ip, [r3, #PLLCTL]
bic ip, ip, #PLLCTL_PLLRST
str ip, [r3, #PLLCTL]
/* Clear PLL power down */
ldr ip, [r3, #PLLCTL]
bic ip, ip, #PLLCTL_PLLPWRDN
str ip, [r3, #PLLCTL]
mov ip, #PLL_RESET_CYCLES
3: subs ip, ip, #0x1
bne 3b
/* Bring PLL out of reset */
ldr ip, [r3, #PLLCTL]
orr ip, ip, #PLLCTL_PLLRST
str ip, [r3, #PLLCTL]
/* Wait for PLL to lock (assume prediv = 1, 25MHz OSCIN) */
mov ip, #PLL_LOCK_CYCLES
4: subs ip, ip, #0x1
bne 4b
/* Remove PLL from bypass mode */
ldr ip, [r3, #PLLCTL]
bic ip, ip, #PLLCTL_PLLENSRC
orr ip, ip, #PLLCTL_PLLEN
str ip, [r3, #PLLCTL]
/* Start 2x clock to DDR2 */
ldr ip, [r3, #PLLDIV1]
orr ip, ip, #PLLDIV_EN
str ip, [r3, #PLLDIV1]
/* Enable VCLK */
/* Enable DDR2 LPSC */
mov r7, r0
mov r0, #0x3
bl davinci_ddr_psc_config
mov r0, r7
/* clear MCLKSTOPEN */
ldr ip, [r0, #DDR2_SDRCR_OFFSET]
bic ip, ip, #DDR2_MCLKSTOPEN_BIT
str ip, [r0, #DDR2_SDRCR_OFFSET]
ldr ip, [r0, #DDR2_SDRCR_OFFSET]
bic ip, ip, #DDR2_LPMODEN_BIT
str ip, [r0, #DDR2_SDRCR_OFFSET]
/* Restore registers and return */
ldmfd sp!, {r0-r12, pc}
ENDPROC(davinci_cpu_suspend)
/*
* Disables or Enables DDR2 LPSC
* Register Usage:
* r0: Enable or Disable LPSC r0 = 0x3 => Enable, r0 = 0x2 => Disable LPSC
* r1: contains virtual base for DDR2 Power and Sleep controller (PSC)
* r2: contains PSC number for DDR2
*/
ENTRY(davinci_ddr_psc_config)
/* Set next state in mdctl for DDR2 */
mov r6, #MDCTL
add r6, r6, r2, lsl #2
ldr ip, [r1, r6]
bic ip, ip, #MDSTAT_STATE_MASK
orr ip, ip, r0
str ip, [r1, r6]
/* Enable the Power Domain Transition Command */
ldr ip, [r1, #PTCMD]
orr ip, ip, #0x1
str ip, [r1, #PTCMD]
/* Check for Transition Complete (PTSTAT) */
ptstat_done:
ldr ip, [r1, #PTSTAT]
and ip, ip, #0x1
cmp ip, #0x0
bne ptstat_done
/* Check for DDR2 clock disable completion; */
mov r6, #MDSTAT
add r6, r6, r2, lsl #2
ddr2clk_stop_done:
ldr ip, [r1, r6]
and ip, ip, #MDSTAT_STATE_MASK
cmp ip, r0
bne ddr2clk_stop_done
mov pc, lr
ENDPROC(davinci_ddr_psc_config)
CACHE_FLUSH:
.word arm926_flush_kern_cache_all
ENTRY(davinci_cpu_suspend_sz)
|