summaryrefslogtreecommitdiffstats
path: root/Documentation/fpga/dfl.rst
blob: 0404fe6ffc7430bcd8e11aaaddaf7351abcc6b58 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
=================================================
FPGA Device Feature List (DFL) Framework Overview
=================================================

Authors:

- Enno Luebbers <enno.luebbers@intel.com>
- Xiao Guangrong <guangrong.xiao@linux.intel.com>
- Wu Hao <hao.wu@intel.com>

The Device Feature List (DFL) FPGA framework (and drivers according to
this framework) hides the very details of low layer hardwares and provides
unified interfaces to userspace. Applications could use these interfaces to
configure, enumerate, open and access FPGA accelerators on platforms which
implement the DFL in the device memory. Besides this, the DFL framework
enables system level management functions such as FPGA reconfiguration.


Device Feature List (DFL) Overview
==================================
Device Feature List (DFL) defines a linked list of feature headers within the
device MMIO space to provide an extensible way of adding features. Software can
walk through these predefined data structures to enumerate FPGA features:
FPGA Interface Unit (FIU), Accelerated Function Unit (AFU) and Private Features,
as illustrated below::

    Header            Header            Header            Header
 +----------+  +-->+----------+  +-->+----------+  +-->+----------+
 |   Type   |  |   |  Type    |  |   |  Type    |  |   |  Type    |
 |   FIU    |  |   | Private  |  |   | Private  |  |   | Private  |
 +----------+  |   | Feature  |  |   | Feature  |  |   | Feature  |
 | Next_DFH |--+   +----------+  |   +----------+  |   +----------+
 +----------+      | Next_DFH |--+   | Next_DFH |--+   | Next_DFH |--> NULL
 |    ID    |      +----------+      +----------+      +----------+
 +----------+      |    ID    |      |    ID    |      |    ID    |
 | Next_AFU |--+   +----------+      +----------+      +----------+
 +----------+  |   | Feature  |      | Feature  |      | Feature  |
 |  Header  |  |   | Register |      | Register |      | Register |
 | Register |  |   |   Set    |      |   Set    |      |   Set    |
 |   Set    |  |   +----------+      +----------+      +----------+
 +----------+  |      Header
               +-->+----------+
                   |   Type   |
                   |   AFU    |
                   +----------+
                   | Next_DFH |--> NULL
                   +----------+
                   |   GUID   |
                   +----------+
                   |  Header  |
                   | Register |
                   |   Set    |
                   +----------+

FPGA Interface Unit (FIU) represents a standalone functional unit for the
interface to FPGA, e.g. the FPGA Management Engine (FME) and Port (more
descriptions on FME and Port in later sections).

Accelerated Function Unit (AFU) represents a FPGA programmable region and
always connects to a FIU (e.g. a Port) as its child as illustrated above.

Private Features represent sub features of the FIU and AFU. They could be
various function blocks with different IDs, but all private features which
belong to the same FIU or AFU, must be linked to one list via the Next Device
Feature Header (Next_DFH) pointer.

Each FIU, AFU and Private Feature could implement its own functional registers.
The functional register set for FIU and AFU, is named as Header Register Set,
e.g. FME Header Register Set, and the one for Private Feature, is named as
Feature Register Set, e.g. FME Partial Reconfiguration Feature Register Set.

This Device Feature List provides a way of linking features together, it's
convenient for software to locate each feature by walking through this list,
and can be implemented in register regions of any FPGA device.


FIU - FME (FPGA Management Engine)
==================================
The FPGA Management Engine performs reconfiguration and other infrastructure
functions. Each FPGA device only has one FME.

User-space applications can acquire exclusive access to the FME using open(),
and release it using close().

The following functions are exposed through ioctls:

- Get driver API version (DFL_FPGA_GET_API_VERSION)
- Check for extensions (DFL_FPGA_CHECK_EXTENSION)
- Program bitstream (DFL_FPGA_FME_PORT_PR)
- Assign port to PF (DFL_FPGA_FME_PORT_ASSIGN)
- Release port from PF (DFL_FPGA_FME_PORT_RELEASE)
- Get number of irqs of FME global error (DFL_FPGA_FME_ERR_GET_IRQ_NUM)
- Set interrupt trigger for FME error (DFL_FPGA_FME_ERR_SET_IRQ)

More functions are exposed through sysfs
(/sys/class/fpga_region/regionX/dfl-fme.n/):

 Read bitstream ID (bitstream_id)
     bitstream_id indicates version of the static FPGA region.

 Read bitstream metadata (bitstream_metadata)
     bitstream_metadata includes detailed information of static FPGA region,
     e.g. synthesis date and seed.

 Read number of ports (ports_num)
     one FPGA device may have more than one port, this sysfs interface indicates
     how many ports the FPGA device has.

 Global error reporting management (errors/)
     error reporting sysfs interfaces allow user to read errors detected by the
     hardware, and clear the logged errors.

 Power management (dfl_fme_power hwmon)
     power management hwmon sysfs interfaces allow user to read power management
     information (power consumption, thresholds, threshold status, limits, etc.)
     and configure power thresholds for different throttling levels.

 Thermal management (dfl_fme_thermal hwmon)
     thermal management hwmon sysfs interfaces allow user to read thermal
     management information (current temperature, thresholds, threshold status,
     etc.).

 Performance reporting
     performance counters are exposed through perf PMU APIs. Standard perf tool
     can be used to monitor all available perf events. Please see performance
     counter section below for more detailed information.


FIU - PORT
==========
A port represents the interface between the static FPGA fabric and a partially
reconfigurable region containing an AFU. It controls the communication from SW
to the accelerator and exposes features such as reset and debug. Each FPGA
device may have more than one port, but always one AFU per port.


AFU
===
An AFU is attached to a port FIU and exposes a fixed length MMIO region to be
used for accelerator-specific control registers.

User-space applications can acquire exclusive access to an AFU attached to a
port by using open() on the port device node and release it using close().

The following functions are exposed through ioctls:

- Get driver API version (DFL_FPGA_GET_API_VERSION)
- Check for extensions (DFL_FPGA_CHECK_EXTENSION)
- Get port info (DFL_FPGA_PORT_GET_INFO)
- Get MMIO region info (DFL_FPGA_PORT_GET_REGION_INFO)
- Map DMA buffer (DFL_FPGA_PORT_DMA_MAP)
- Unmap DMA buffer (DFL_FPGA_PORT_DMA_UNMAP)
- Reset AFU (DFL_FPGA_PORT_RESET)
- Get number of irqs of port error (DFL_FPGA_PORT_ERR_GET_IRQ_NUM)
- Set interrupt trigger for port error (DFL_FPGA_PORT_ERR_SET_IRQ)
- Get number of irqs of UINT (DFL_FPGA_PORT_UINT_GET_IRQ_NUM)
- Set interrupt trigger for UINT (DFL_FPGA_PORT_UINT_SET_IRQ)

DFL_FPGA_PORT_RESET:
  reset the FPGA Port and its AFU. Userspace can do Port
  reset at any time, e.g. during DMA or Partial Reconfiguration. But it should
  never cause any system level issue, only functional failure (e.g. DMA or PR
  operation failure) and be recoverable from the failure.

User-space applications can also mmap() accelerator MMIO regions.

More functions are exposed through sysfs:
(/sys/class/fpga_region/<regionX>/<dfl-port.m>/):

 Read Accelerator GUID (afu_id)
     afu_id indicates which PR bitstream is programmed to this AFU.

 Error reporting (errors/)
     error reporting sysfs interfaces allow user to read port/afu errors
     detected by the hardware, and clear the logged errors.


DFL Framework Overview
======================

::

         +----------+    +--------+ +--------+ +--------+
         |   FME    |    |  AFU   | |  AFU   | |  AFU   |
         |  Module  |    | Module | | Module | | Module |
         +----------+    +--------+ +--------+ +--------+
                 +-----------------------+
                 | FPGA Container Device |    Device Feature List
                 |  (FPGA Base Region)   |         Framework
                 +-----------------------+
  ------------------------------------------------------------------
               +----------------------------+
               |   FPGA DFL Device Module   |
               | (e.g. PCIE/Platform Device)|
               +----------------------------+
                 +------------------------+
                 |  FPGA Hardware Device  |
                 +------------------------+

DFL framework in kernel provides common interfaces to create container device
(FPGA base region), discover feature devices and their private features from the
given Device Feature Lists and create platform devices for feature devices
(e.g. FME, Port and AFU) with related resources under the container device. It
also abstracts operations for the private features and exposes common ops to
feature device drivers.

The FPGA DFL Device could be different hardwares, e.g. PCIe device, platform
device and etc. Its driver module is always loaded first once the device is
created by the system. This driver plays an infrastructural role in the
driver architecture. It locates the DFLs in the device memory, handles them
and related resources to common interfaces from DFL framework for enumeration.
(Please refer to drivers/fpga/dfl.c for detailed enumeration APIs).

The FPGA Management Engine (FME) driver is a platform driver which is loaded
automatically after FME platform device creation from the DFL device module. It
provides the key features for FPGA management, including:

	a) Expose static FPGA region information, e.g. version and metadata.
	   Users can read related information via sysfs interfaces exposed
	   by FME driver.

	b) Partial Reconfiguration. The FME driver creates FPGA manager, FPGA
	   bridges and FPGA regions during PR sub feature initialization. Once
	   it receives a DFL_FPGA_FME_PORT_PR ioctl from user, it invokes the
	   common interface function from FPGA Region to complete the partial
	   reconfiguration of the PR bitstream to the given port.

Similar to the FME driver, the FPGA Accelerated Function Unit (AFU) driver is
probed once the AFU platform device is created. The main function of this module
is to provide an interface for userspace applications to access the individual
accelerators, including basic reset control on port, AFU MMIO region export, dma
buffer mapping service functions.

After feature platform devices creation, matched platform drivers will be loaded
automatically to handle different functionalities. Please refer to next sections
for detailed information on functional units which have been already implemented
under this DFL framework.


Partial Reconfiguration
=======================
As mentioned above, accelerators can be reconfigured through partial
reconfiguration of a PR bitstream file. The PR bitstream file must have been
generated for the exact static FPGA region and targeted reconfigurable region
(port) of the FPGA, otherwise, the reconfiguration operation will fail and
possibly cause system instability. This compatibility can be checked by
comparing the compatibility ID noted in the header of PR bitstream file against
the compat_id exposed by the target FPGA region. This check is usually done by
userspace before calling the reconfiguration IOCTL.


FPGA virtualization - PCIe SRIOV
================================
This section describes the virtualization support on DFL based FPGA device to
enable accessing an accelerator from applications running in a virtual machine
(VM). This section only describes the PCIe based FPGA device with SRIOV support.

Features supported by the particular FPGA device are exposed through Device
Feature Lists, as illustrated below:

::

    +-------------------------------+  +-------------+
    |              PF               |  |     VF      |
    +-------------------------------+  +-------------+
        ^            ^         ^              ^
        |            |         |              |
  +-----|------------|---------|--------------|-------+
  |     |            |         |              |       |
  |  +-----+     +-------+ +-------+      +-------+   |
  |  | FME |     | Port0 | | Port1 |      | Port2 |   |
  |  +-----+     +-------+ +-------+      +-------+   |
  |                  ^         ^              ^       |
  |                  |         |              |       |
  |              +-------+ +------+       +-------+   |
  |              |  AFU  | |  AFU |       |  AFU  |   |
  |              +-------+ +------+       +-------+   |
  |                                                   |
  |            DFL based FPGA PCIe Device             |
  +---------------------------------------------------+

FME is always accessed through the physical function (PF).

Ports (and related AFUs) are accessed via PF by default, but could be exposed
through virtual function (VF) devices via PCIe SRIOV. Each VF only contains
1 Port and 1 AFU for isolation. Users could assign individual VFs (accelerators)
created via PCIe SRIOV interface, to virtual machines.

The driver organization in virtualization case is illustrated below:
::

    +-------++------++------+             |
    | FME   || FME  || FME  |             |
    | FPGA  || FPGA || FPGA |             |
    |Manager||Bridge||Region|             |
    +-------++------++------+             |
    +-----------------------+  +--------+ |             +--------+
    |          FME          |  |  AFU   | |             |  AFU   |
    |         Module        |  | Module | |             | Module |
    +-----------------------+  +--------+ |             +--------+
          +-----------------------+       |       +-----------------------+
          | FPGA Container Device |       |       | FPGA Container Device |
          |  (FPGA Base Region)   |       |       |  (FPGA Base Region)   |
          +-----------------------+       |       +-----------------------+
            +------------------+          |         +------------------+
            | FPGA PCIE Module |          | Virtual | FPGA PCIE Module |
            +------------------+   Host   | Machine +------------------+
   -------------------------------------- | ------------------------------
             +---------------+            |          +---------------+
             | PCI PF Device |            |          | PCI VF Device |
             +---------------+            |          +---------------+

FPGA PCIe device driver is always loaded first once a FPGA PCIe PF or VF device
is detected. It:

* Finishes enumeration on both FPGA PCIe PF and VF device using common
  interfaces from DFL framework.
* Supports SRIOV.

The FME device driver plays a management role in this driver architecture, it
provides ioctls to release Port from PF and assign Port to PF. After release
a port from PF, then it's safe to expose this port through a VF via PCIe SRIOV
sysfs interface.

To enable accessing an accelerator from applications running in a VM, the
respective AFU's port needs to be assigned to a VF using the following steps:

#. The PF owns all AFU ports by default. Any port that needs to be
   reassigned to a VF must first be released through the
   DFL_FPGA_FME_PORT_RELEASE ioctl on the FME device.

#. Once N ports are released from PF, then user can use command below
   to enable SRIOV and VFs. Each VF owns only one Port with AFU.

   ::

      echo N > $PCI_DEVICE_PATH/sriov_numvfs

#. Pass through the VFs to VMs

#. The AFU under VF is accessible from applications in VM (using the
   same driver inside the VF).

Note that an FME can't be assigned to a VF, thus PR and other management
functions are only available via the PF.

Device enumeration
==================
This section introduces how applications enumerate the fpga device from
the sysfs hierarchy under /sys/class/fpga_region.

In the example below, two DFL based FPGA devices are installed in the host. Each
fpga device has one FME and two ports (AFUs).

FPGA regions are created under /sys/class/fpga_region/::

	/sys/class/fpga_region/region0
	/sys/class/fpga_region/region1
	/sys/class/fpga_region/region2
	...

Application needs to search each regionX folder, if feature device is found,
(e.g. "dfl-port.n" or "dfl-fme.m" is found), then it's the base
fpga region which represents the FPGA device.

Each base region has one FME and two ports (AFUs) as child devices::

	/sys/class/fpga_region/region0/dfl-fme.0
	/sys/class/fpga_region/region0/dfl-port.0
	/sys/class/fpga_region/region0/dfl-port.1
	...

	/sys/class/fpga_region/region3/dfl-fme.1
	/sys/class/fpga_region/region3/dfl-port.2
	/sys/class/fpga_region/region3/dfl-port.3
	...

In general, the FME/AFU sysfs interfaces are named as follows::

	/sys/class/fpga_region/<regionX>/<dfl-fme.n>/
	/sys/class/fpga_region/<regionX>/<dfl-port.m>/

with 'n' consecutively numbering all FMEs and 'm' consecutively numbering all
ports.

The device nodes used for ioctl() or mmap() can be referenced through::

	/sys/class/fpga_region/<regionX>/<dfl-fme.n>/dev
	/sys/class/fpga_region/<regionX>/<dfl-port.n>/dev


Performance Counters
====================
Performance reporting is one private feature implemented in FME. It could
supports several independent, system-wide, device counter sets in hardware to
monitor and count for performance events, including "basic", "cache", "fabric",
"vtd" and "vtd_sip" counters. Users could use standard perf tool to monitor
FPGA cache hit/miss rate, transaction number, interface clock counter of AFU
and other FPGA performance events.

Different FPGA devices may have different counter sets, depending on hardware
implementation. E.g., some discrete FPGA cards don't have any cache. User could
use "perf list" to check which perf events are supported by target hardware.

In order to allow user to use standard perf API to access these performance
counters, driver creates a perf PMU, and related sysfs interfaces in
/sys/bus/event_source/devices/dfl_fme* to describe available perf events and
configuration options.

The "format" directory describes the format of the config field of struct
perf_event_attr. There are 3 bitfields for config: "evtype" defines which type
the perf event belongs to; "event" is the identity of the event within its
category; "portid" is introduced to decide counters set to monitor on FPGA
overall data or a specific port.

The "events" directory describes the configuration templates for all available
events which can be used with perf tool directly. For example, fab_mmio_read
has the configuration "event=0x06,evtype=0x02,portid=0xff", which shows this
event belongs to fabric type (0x02), the local event id is 0x06 and it is for
overall monitoring (portid=0xff).

Example usage of perf::

  $# perf list |grep dfl_fme

  dfl_fme0/fab_mmio_read/                              [Kernel PMU event]
  <...>
  dfl_fme0/fab_port_mmio_read,portid=?/                [Kernel PMU event]
  <...>

  $# perf stat -a -e dfl_fme0/fab_mmio_read/ <command>
  or
  $# perf stat -a -e dfl_fme0/event=0x06,evtype=0x02,portid=0xff/ <command>
  or
  $# perf stat -a -e dfl_fme0/config=0xff2006/ <command>

Another example, fab_port_mmio_read monitors mmio read of a specific port. So
its configuration template is "event=0x06,evtype=0x01,portid=?". The portid
should be explicitly set.

Its usage of perf::

  $# perf stat -a -e dfl_fme0/fab_port_mmio_read,portid=0x0/ <command>
  or
  $# perf stat -a -e dfl_fme0/event=0x06,evtype=0x02,portid=0x0/ <command>
  or
  $# perf stat -a -e dfl_fme0/config=0x2006/ <command>

Please note for fabric counters, overall perf events (fab_*) and port perf
events (fab_port_*) actually share one set of counters in hardware, so it can't
monitor both at the same time. If this set of counters is configured to monitor
overall data, then per port perf data is not supported. See below example::

  $# perf stat -e dfl_fme0/fab_mmio_read/,dfl_fme0/fab_port_mmio_write,\
                                                    portid=0/ sleep 1

  Performance counter stats for 'system wide':

                 3      dfl_fme0/fab_mmio_read/
   <not supported>      dfl_fme0/fab_port_mmio_write,portid=0x0/

       1.001750904 seconds time elapsed

The driver also provides a "cpumask" sysfs attribute, which contains only one
CPU id used to access these perf events. Counting on multiple CPU is not allowed
since they are system-wide counters on FPGA device.

The current driver does not support sampling. So "perf record" is unsupported.


Interrupt support
=================
Some FME and AFU private features are able to generate interrupts. As mentioned
above, users could call ioctl (DFL_FPGA_*_GET_IRQ_NUM) to know whether or how
many interrupts are supported for this private feature. Drivers also implement
an eventfd based interrupt handling mechanism for users to get notified when
interrupt happens. Users could set eventfds to driver via
ioctl (DFL_FPGA_*_SET_IRQ), and then poll/select on these eventfds waiting for
notification.
In Current DFL, 3 sub features (Port error, FME global error and AFU interrupt)
support interrupts.


Add new FIUs support
====================
It's possible that developers made some new function blocks (FIUs) under this
DFL framework, then new platform device driver needs to be developed for the
new feature dev (FIU) following the same way as existing feature dev drivers
(e.g. FME and Port/AFU platform device driver). Besides that, it requires
modification on DFL framework enumeration code too, for new FIU type detection
and related platform devices creation.


Add new private features support
================================
In some cases, we may need to add some new private features to existing FIUs
(e.g. FME or Port). Developers don't need to touch enumeration code in DFL
framework, as each private feature will be parsed automatically and related
mmio resources can be found under FIU platform device created by DFL framework.
Developer only needs to provide a sub feature driver with matched feature id.
FME Partial Reconfiguration Sub Feature driver (see drivers/fpga/dfl-fme-pr.c)
could be a reference.


Open discussion
===============
FME driver exports one ioctl (DFL_FPGA_FME_PORT_PR) for partial reconfiguration
to user now. In the future, if unified user interfaces for reconfiguration are
added, FME driver should switch to them from ioctl interface.