summaryrefslogtreecommitdiffstats
path: root/net/can
AgeCommit message (Collapse)Author
2020-12-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
xdp_return_frame_bulk() needs to pass a xdp_buff to __xdp_return(). strlcpy got converted to strscpy but here it makes no functional difference, so just keep the right code. Conflicts: net/netfilter/nf_tables_api.c Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-10can: isotp: add SF_BROADCAST support for functional addressingOliver Hartkopp
When CAN_ISOTP_SF_BROADCAST is set in the CAN_ISOTP_OPTS flags the CAN_ISOTP socket is switched into functional addressing mode, where only single frame (SF) protocol data units can be send on the specified CAN interface and the given tp.tx_id after bind(). In opposite to normal and extended addressing this socket does not register a CAN-ID for reception which would be needed for a 1-to-1 ISOTP connection with a segmented bi-directional data transfer. Sending SFs on this socket is therefore a TX-only 'broadcast' operation. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Thomas Wagner <thwa1@web.de> Link: https://lore.kernel.org/r/20201206144731.4609-1-socketcan@hartkopp.net Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-12-09can: isotp: isotp_setsockopt(): block setsockopt on bound socketsOliver Hartkopp
The isotp socket can be widely configured in its behaviour regarding addressing types, fill-ups, receive pattern tests and link layer length. Usually all these settings need to be fixed before bind() and can not be changed afterwards. This patch adds a check to enforce the common usage pattern. Fixes: e057dd3fc20f ("can: add ISO 15765-2:2016 transport protocol") Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Tested-by: Thomas Wagner <thwa1@web.de> Link: https://lore.kernel.org/r/20201203140604.25488-2-socketcan@hartkopp.net Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Link: https://lore.kernel.org/r/20201204133508.742120-3-mkl@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Trivial conflict in CAN, keep the net-next + the byteswap wrapper. Conflicts: drivers/net/can/usb/gs_usb.c Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-27can: af_can: can_rx_unregister(): remove WARN() statement from list ↵Oliver Hartkopp
operation sanity check To detect potential bugs in CAN protocol implementations (double removal of receiver entries) a WARN() statement has been used if no matching list item was found for removal. The fault injection issued by syzkaller was able to create a situation where the closing of a socket runs simultaneously to the notifier call chain for removing the CAN network device in use. This case is very unlikely in real life but it doesn't break anything. Therefore we just replace the WARN() statement with pr_warn() to preserve the notification for the CAN protocol development. Reported-by: syzbot+381d06e0c8eaacb8706f@syzkaller.appspotmail.com Reported-by: syzbot+d0ddd88c9a7432f041e6@syzkaller.appspotmail.com Reported-by: syzbot+76d62d3b8162883c7d11@syzkaller.appspotmail.com Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/r/20201126192140.14350-1-socketcan@hartkopp.net Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-20can: gw: support modification of Classical CAN DLCsOliver Hartkopp
Add support for data length code modifications for Classical CAN. The netlink configuration interface always allowed to pass any value that fits into a byte, therefore only the modification process had to be extended to handle the raw DLC represenation of Classical CAN frames. When a DLC value from 0 .. F is provided for Classical CAN frame modifications the 'len' value is modified as-is with the exception that potentially existing 9 .. F DLC values in the len8_dlc element are moved to the 'len' element for the modification operation by mod_retrieve_ccdlc(). After the modification the Classical CAN frame DLC information is brought back into the correct format by mod_store_ccdlc() which is filling 'len' and 'len8_dlc' accordingly. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/r/20201119084921.2621-1-socketcan@hartkopp.net Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-20can: replace can_dlc as variable/element for payload lengthOliver Hartkopp
The naming of can_dlc as element of struct can_frame and also as variable name is misleading as it claims to be a 'data length CODE' but in reality it always was a plain data length. With the indroduction of a new 'len' element in struct can_frame we can now remove can_dlc as name and make clear which of the former uses was a plain length (-> 'len') or a data length code (-> 'dlc') value. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/r/20201120100444.3199-1-socketcan@hartkopp.net [mkl: gs_usb: keep struct gs_host_frame::can_dlc as is] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-15can: af_can: prevent potential access of uninitialized member in canfd_rcv()Anant Thazhemadam
In canfd_rcv(), cfd->len is uninitialized when skb->len = 0, and this uninitialized cfd->len is accessed nonetheless by pr_warn_once(). Fix this uninitialized variable access by checking cfd->len's validity condition (cfd->len > CANFD_MAX_DLEN) separately after the skb->len's condition is checked, and appropriately modify the log messages that are generated as well. In case either of the required conditions fail, the skb is freed and NET_RX_DROP is returned, same as before. Fixes: d4689846881d ("can: af_can: canfd_rcv(): replace WARN_ONCE by pr_warn_once") Reported-by: syzbot+9bcb0c9409066696d3aa@syzkaller.appspotmail.com Tested-by: Anant Thazhemadam <anant.thazhemadam@gmail.com> Signed-off-by: Anant Thazhemadam <anant.thazhemadam@gmail.com> Link: https://lore.kernel.org/r/20201103213906.24219-3-anant.thazhemadam@gmail.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-15can: af_can: prevent potential access of uninitialized member in can_rcv()Anant Thazhemadam
In can_rcv(), cfd->len is uninitialized when skb->len = 0, and this uninitialized cfd->len is accessed nonetheless by pr_warn_once(). Fix this uninitialized variable access by checking cfd->len's validity condition (cfd->len > CAN_MAX_DLEN) separately after the skb->len's condition is checked, and appropriately modify the log messages that are generated as well. In case either of the required conditions fail, the skb is freed and NET_RX_DROP is returned, same as before. Fixes: 8cb68751c115 ("can: af_can: can_rcv(): replace WARN_ONCE by pr_warn_once") Reported-by: syzbot+9bcb0c9409066696d3aa@syzkaller.appspotmail.com Tested-by: Anant Thazhemadam <anant.thazhemadam@gmail.com> Signed-off-by: Anant Thazhemadam <anant.thazhemadam@gmail.com> Link: https://lore.kernel.org/r/20201103213906.24219-2-anant.thazhemadam@gmail.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-03can: isotp: padlen(): make const array static, makes object smallerColin Ian King
Don't populate the const array plen on the stack but instead it static. Makes the object code smaller by 926 bytes. Before: text data bss dec hex filename 26531 1943 64 28538 6f7a net/can/isotp.o After: text data bss dec hex filename 25509 2039 64 27612 6bdc net/can/isotp.o (gcc version 10.2.0) Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20201020154203.54711-1-colin.king@canonical.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-03can: isotp: isotp_rcv_cf(): enable RX timeout handling in listen-only modeOliver Hartkopp
As reported by Thomas Wagner: https://github.com/hartkopp/can-isotp/issues/34 the timeout handling for data frames is not enabled when the isotp socket is used in listen-only mode (sockopt CAN_ISOTP_LISTEN_MODE). This mode is enabled by the isotpsniffer application which therefore became inconsistend with the strict rx timeout rules when running the isotp protocol in the operational mode. This patch fixes this inconsistency by moving the return condition for the listen-only mode behind the timeout handling code. Reported-by: Thomas Wagner <thwa1@web.de> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Fixes: e057dd3fc20f ("can: add ISO 15765-2:2016 transport protocol") Link: https://github.com/hartkopp/can-isotp/issues/34 Link: https://lore.kernel.org/r/20201019120229.89326-1-socketcan@hartkopp.net Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-03can: isotp: Explain PDU in CAN_ISOTP help textGeert Uytterhoeven
The help text for the CAN_ISOTP config symbol uses the acronym "PDU". However, this acronym is not explained here, nor in Documentation/networking/can.rst. Expand the acronym to make it easier for users to decide if they need to enable the CAN_ISOTP option or not. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20201013141341.28487-1-geert+renesas@glider.be Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-03can: j1939: j1939_sk_bind(): return failure if netdev is downZhang Changzhong
When a netdev down event occurs after a successful call to j1939_sk_bind(), j1939_netdev_notify() can handle it correctly. But if the netdev already in down state before calling j1939_sk_bind(), j1939_sk_release() will stay in wait_event_interruptible() blocked forever. Because in this case, j1939_netdev_notify() won't be called and j1939_tp_txtimer() won't call j1939_session_cancel() or other function to clear session for ENETDOWN error, this lead to mismatch of j1939_session_get/put() and jsk->skb_pending will never decrease to zero. To reproduce it use following commands: 1. ip link add dev vcan0 type vcan 2. j1939acd -r 100,80-120 1122334455667788 vcan0 3. presses ctrl-c and thread will be blocked forever This patch adds check for ndev->flags in j1939_sk_bind() to avoid this kind of situation and return with -ENETDOWN. Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Link: https://lore.kernel.org/r/1599460308-18770-1-git-send-email-zhangchangzhong@huawei.com Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-03can: proc: can_remove_proc(): silence remove_proc_entry warningZhang Changzhong
If can_init_proc() fail to create /proc/net/can directory, can_remove_proc() will trigger a warning: WARNING: CPU: 6 PID: 7133 at fs/proc/generic.c:672 remove_proc_entry+0x17b0 Kernel panic - not syncing: panic_on_warn set ... Fix to return early from can_remove_proc() if can proc_dir does not exists. Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Link: https://lore.kernel.org/r/1594709090-3203-1-git-send-email-zhangchangzhong@huawei.com Fixes: 8e8cda6d737d ("can: initial support for network namespaces") Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-10-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Minor conflicts in net/mptcp/protocol.h and tools/testing/selftests/net/Makefile. In both cases code was added on both sides in the same place so just keep both. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-12can: remove obsolete version stringsOliver Hartkopp
As pointed out by Jakub Kicinski here: http://lore.kernel.org/r/20201009175751.5c54097f@kicinski-fedora-pc1c0hjn.dhcp.thefacebook.com this patch removes the obsolete version information of the different CAN protocols and the AF_CAN core module. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/r/20201012074354.25839-2-socketcan@hartkopp.net Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-10-12can: isotp: implement cleanups / improvements from reviewOliver Hartkopp
As pointed out by Jakub Kicinski here: http://lore.kernel.org/r/20201009175751.5c54097f@kicinski-fedora-pc1c0hjn.dhcp.thefacebook.com this patch addresses the remarked issues: - remove empty line in comment - remove default=y for CAN_ISOTP in Kconfig - make use of pr_notice_once() - use GFP_ATOMIC instead of gfp_any() in soft hrtimer context The version strings in the CAN subsystem are removed by a separate patch. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/r/20201012074354.25839-1-socketcan@hartkopp.net Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-10-08net: j1939: j1939_session_fresh_new(): fix missing initialization of skbcntMarc Kleine-Budde
This patch add the initialization of skbcnt, similar to: e009f95b1543 can: j1935: j1939_tp_tx_dat_new(): fix missing initialization of skbcnt Let's play save and initialize this skbcnt as well. Suggested-by: Jakub Kicinski <kuba@kernel.org> Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-10-08can: j1935: j1939_tp_tx_dat_new(): fix missing initialization of skbcntCong Wang
This fixes an uninit-value warning: BUG: KMSAN: uninit-value in can_receive+0x26b/0x630 net/can/af_can.c:650 Reported-and-tested-by: syzbot+3f3837e61a48d32b495f@syzkaller.appspotmail.com Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Cc: Robin van der Gracht <robin@protonic.nl> Cc: Oleksij Rempel <linux@rempel-privat.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Oliver Hartkopp <socketcan@hartkopp.net> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Link: https://lore.kernel.org/r/20201008061821.24663-1-xiyou.wangcong@gmail.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-10-07can: add ISO 15765-2:2016 transport protocolOliver Hartkopp
CAN Transport Protocols offer support for segmented Point-to-Point communication between CAN nodes via two defined CAN Identifiers. As CAN frames can only transport a small amount of data bytes (max. 8 bytes for 'classic' CAN and max. 64 bytes for CAN FD) this segmentation is needed to transport longer PDUs as needed e.g. for vehicle diagnosis (UDS, ISO 14229) or IP-over-CAN traffic. This protocol driver implements data transfers according to ISO 15765-2:2016 for 'classic' CAN and CAN FD frame types. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/r/20200928200404.82229-1-socketcan@hartkopp.net [mkl: Removed "WITH Linux-syscall-note" from isotp.c. Fixed indention, a checkpatch warning and typos. Replaced __u{8,32} by u{8,32}. Removed always false (optlen < 0) check in isotp_setsockopt().] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-10-06can: raw: add missing error queue supportVincent Mailhol
Error queue are not yet implemented in CAN-raw sockets. The problem: a userland call to recvmsg(soc, msg, MSG_ERRQUEUE) on a CAN-raw socket would unqueue messages from the normal queue without any kind of error or warning. As such, it prevented CAN drivers from using the functionalities that relies on the error queue such as skb_tx_timestamp(). SCM_CAN_RAW_ERRQUEUE is defined as the type for the CAN raw error queue. SCM stands for "Socket control messages". The name is inspired from SCM_J1939_ERRQUEUE of include/uapi/linux/can/j1939.h. Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/r/20200926162527.270030-1-mailhol.vincent@wanadoo.fr Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-10-06can: af_can: can_rcv_list_find(): fix kernel doc after variable renamingMarc Kleine-Budde
This patch fixes the kernel doc for can_rcv_list_find() which was broken in commit: 3ee6d2bebef8 ("can: af_can: rename find_rcv_list() to can_rcv_list_find()") while renaming a variable, but forgetting to rename the kernel doc, too. Link: http://lore.kernel.org/r/20201006203748.1750156-2-mkl@pengutronix.de Fixes: 3ee6d2bebef8 ("can: af_can: rename find_rcv_list() to can_rcv_list_find()") Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-09-21can: remove "WITH Linux-syscall-note" from SPDX tag of C filesMasahiro Yamada
The "WITH Linux-syscall-note" exception is intended for UAPI headers. See LICENSES/exceptions/Linux-syscall-note Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Link: https://lore.kernel.org/r/20200403073741.18352-1-masahiroy@kernel.org Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-09-21can: raw: fix indentionMarc Kleine-Budde
This patch fixes the indention to follow kernel coding style. Link: https://lore.kernel.org/r/20200915223527.1417033-7-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-09-21can: net: fix spelling mistakesMarc Kleine-Budde
This patch fixes spelling erros found by "codespell" in the net/can subtree. Link: https://lore.kernel.org/r/20200915223527.1417033-5-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-08-23treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-08-15can: j1939: add rxtimer for multipacket broadcast sessionZhang Changzhong
According to SAE J1939/21 (Chapter 5.12.3 and APPENDIX C), for transmit side the required time interval between packets of a multipacket broadcast message is 50 to 200 ms, the responder shall use a timeout of 250ms (provides margin allowing for the maximumm spacing of 200ms). For receive side a timeout will occur when a time of greater than 750 ms elapsed between two message packets when more packets were expected. So this patch fix and add rxtimer for multipacket broadcast session. Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Link: https://lore.kernel.org/r/1596599425-5534-5-git-send-email-zhangchangzhong@huawei.com Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-08-15can: j1939: abort multipacket broadcast session when timeout occursZhang Changzhong
If timeout occurs, j1939_tp_rxtimer() first calls hrtimer_start() to restart rxtimer, and then calls __j1939_session_cancel() to set session->state = J1939_SESSION_WAITING_ABORT. At next timeout expiration, because of the J1939_SESSION_WAITING_ABORT session state j1939_tp_rxtimer() will call j1939_session_deactivate_activate_next() to deactivate current session, and rxtimer won't be set. But for multipacket broadcast session, __j1939_session_cancel() don't set session->state = J1939_SESSION_WAITING_ABORT, thus current session won't be deactivate and hrtimer_start() is called to start new rxtimer again and again. So fix it by moving session->state = J1939_SESSION_WAITING_ABORT out of if (!j1939_cb_is_broadcast(&session->skcb)) statement. Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Link: https://lore.kernel.org/r/1596599425-5534-4-git-send-email-zhangchangzhong@huawei.com Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-08-15can: j1939: cancel rxtimer on multipacket broadcast session completeZhang Changzhong
If j1939_xtp_rx_dat_one() receive last frame of multipacket broadcast message, j1939_session_timers_cancel() should be called to cancel rxtimer. Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Link: https://lore.kernel.org/r/1596599425-5534-3-git-send-email-zhangchangzhong@huawei.com Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-08-15can: j1939: fix support for multipacket broadcast messageZhang Changzhong
Currently j1939_tp_im_involved_anydir() in j1939_tp_recv() check the previously set flags J1939_ECU_LOCAL_DST and J1939_ECU_LOCAL_SRC of incoming skb, thus multipacket broadcast message was aborted by receive side because it may come from remote ECUs and have no exact dst address. Similarly, j1939_tp_cmd_recv() and j1939_xtp_rx_dat() didn't process broadcast message. So fix it by checking and process broadcast message in j1939_tp_recv(), j1939_tp_cmd_recv() and j1939_xtp_rx_dat(). Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Link: https://lore.kernel.org/r/1596599425-5534-2-git-send-email-zhangchangzhong@huawei.com Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-08-14can: j1939: transport: j1939_xtp_rx_dat_one(): compare own packets to detect ↵Oleksij Rempel
corruptions Since the stack relays on receiving own packets, it was overwriting own transmit buffer from received packets. At least theoretically, the received echo buffer can be corrupt or changed and the session partner can request to resend previous data. In this case we will re-send bad data. With this patch we will stop to overwrite own TX buffer and use it for sanity checking. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20200807105200.26441-6-o.rempel@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-08-14can: j1939: transport: add j1939_session_skb_find_by_offset() functionOleksij Rempel
Sometimes it makes no sense to search the skb by pkt.dpo, since we need next the skb within the transaction block. This may happen if we have an ETP session with CTS set to less than 255 packets. After this patch, we will be able to work with ETP sessions where the block size (ETP.CM_CTS byte 2) is less than 255 packets. Reported-by: Henrique Figueira <henrislip@gmail.com> Reported-by: https://github.com/linux-can/can-utils/issues/228 Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20200807105200.26441-5-o.rempel@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-08-14can: j1939: socket: j1939_sk_bind(): make sure ml_priv is allocatedOleksij Rempel
This patch adds check to ensure that the struct net_device::ml_priv is allocated, as it is used later by the j1939 stack. The allocation is done by all mainline CAN network drivers, but when using bond or team devices this is not the case. Bail out if no ml_priv is allocated. Reported-by: syzbot+f03d384f3455d28833eb@syzkaller.appspotmail.com Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Cc: linux-stable <stable@vger.kernel.org> # >= v5.4 Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20200807105200.26441-4-o.rempel@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-08-14can: j1939: transport: j1939_session_tx_dat(): fix use-after-free read in ↵Oleksij Rempel
j1939_tp_txtimer() The current stack implementation do not support ECTS requests of not aligned TP sized blocks. If ECTS will request a block with size and offset spanning two TP blocks, this will cause memcpy() to read beyond the queued skb (which does only contain one TP sized block). Sometimes KASAN will detect this read if the memory region beyond the skb was previously allocated and freed. In other situations it will stay undetected. The ETP transfer in any case will be corrupted. This patch adds a sanity check to avoid this kind of read and abort the session with error J1939_XTP_ABORT_ECTS_TOO_BIG. Reported-by: syzbot+5322482fe520b02aea30@syzkaller.appspotmail.com Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Cc: linux-stable <stable@vger.kernel.org> # >= v5.4 Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20200807105200.26441-3-o.rempel@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-08-14can: j1939: transport: j1939_simple_recv(): ignore local J1939 messages send ↵Oleksij Rempel
not by J1939 stack In current J1939 stack implementation, we process all locally send messages as own messages. Even if it was send by CAN_RAW socket. To reproduce it use following commands: testj1939 -P -r can0:0x80 & cansend can0 18238040#0123 This step will trigger false positive not critical warning: j1939_simple_recv: Received already invalidated message With this patch we add additional check to make sure, related skb is own echo message. Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20200807105200.26441-2-o.rempel@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-08-14can: j1939: fix kernel-infoleak in j1939_sk_sock2sockaddr_can()Eric Dumazet
syzbot found that at least 2 bytes of kernel information were leaked during getsockname() on AF_CAN CAN_J1939 socket. Since struct sockaddr_can has in fact two holes, simply clear the whole area before filling it with useful data. BUG: KMSAN: kernel-infoleak in kmsan_copy_to_user+0x81/0x90 mm/kmsan/kmsan_hooks.c:253 CPU: 0 PID: 8466 Comm: syz-executor511 Not tainted 5.8.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x21c/0x280 lib/dump_stack.c:118 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:121 kmsan_internal_check_memory+0x238/0x3d0 mm/kmsan/kmsan.c:423 kmsan_copy_to_user+0x81/0x90 mm/kmsan/kmsan_hooks.c:253 instrument_copy_to_user include/linux/instrumented.h:91 [inline] _copy_to_user+0x18e/0x260 lib/usercopy.c:39 copy_to_user include/linux/uaccess.h:186 [inline] move_addr_to_user+0x3de/0x670 net/socket.c:237 __sys_getsockname+0x407/0x5e0 net/socket.c:1909 __do_sys_getsockname net/socket.c:1920 [inline] __se_sys_getsockname+0x91/0xb0 net/socket.c:1917 __x64_sys_getsockname+0x4a/0x70 net/socket.c:1917 do_syscall_64+0xad/0x160 arch/x86/entry/common.c:386 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x440219 Code: Bad RIP value. RSP: 002b:00007ffe5ee150c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000033 RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 0000000000440219 RDX: 0000000020000240 RSI: 0000000020000100 RDI: 0000000000000003 RBP: 00000000006ca018 R08: 0000000000000000 R09: 00000000004002c8 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000401a20 R13: 0000000000401ab0 R14: 0000000000000000 R15: 0000000000000000 Local variable ----address@__sys_getsockname created at: __sys_getsockname+0x91/0x5e0 net/socket.c:1894 __sys_getsockname+0x91/0x5e0 net/socket.c:1894 Bytes 2-3 of 24 are uninitialized Memory access of size 24 starts at ffff8880ba2c7de8 Data copied to user address 0000000020000100 Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Robin van der Gracht <robin@protonic.nl> Cc: Oleksij Rempel <o.rempel@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: linux-can@vger.kernel.org Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20200813161834.4021638-1-edumazet@google.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-07-24net: pass a sockptr_t into ->setsockoptChristoph Hellwig
Rework the remaining setsockopt code to pass a sockptr_t instead of a plain user pointer. This removes the last remaining set_fs(KERNEL_DS) outside of architecture specific code. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Stefan Schmidt <stefan@datenfreihafen.org> [ieee802154] Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-19net: make ->{get,set}sockopt in proto_ops optionalChristoph Hellwig
Just check for a NULL method instead of wiring up sock_no_{get,set}sockopt. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-13net: can: kerneldoc fixesAndrew Lunn
Simple fixes which require no deep knowledge of the code. Cc: Oliver Hartkopp <socketcan@hartkopp.net> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-14treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2019-12-08can: j1939: j1939_sk_bind(): take priv after lock is heldOleksij Rempel
syzbot reproduced following crash: =============================================================================== kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 9844 Comm: syz-executor.0 Not tainted 5.4.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__lock_acquire+0x1254/0x4a00 kernel/locking/lockdep.c:3828 Code: 00 0f 85 96 24 00 00 48 81 c4 f0 00 00 00 5b 41 5c 41 5d 41 5e 41 5f 5d c3 48 b8 00 00 00 00 00 fc ff df 4c 89 f2 48 c1 ea 03 <80> 3c 02 00 0f 85 0b 28 00 00 49 81 3e 20 19 78 8a 0f 84 5f ee ff RSP: 0018:ffff888099c3fb48 EFLAGS: 00010006 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000218 RSI: 0000000000000000 RDI: 0000000000000001 RBP: ffff888099c3fc60 R08: 0000000000000001 R09: 0000000000000001 R10: fffffbfff146e1d0 R11: ffff888098720400 R12: 00000000000010c0 R13: 0000000000000000 R14: 00000000000010c0 R15: 0000000000000000 FS: 00007f0559e98700(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fe4d89e0000 CR3: 0000000099606000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: lock_acquire+0x190/0x410 kernel/locking/lockdep.c:4485 __raw_spin_lock_bh include/linux/spinlock_api_smp.h:135 [inline] _raw_spin_lock_bh+0x33/0x50 kernel/locking/spinlock.c:175 spin_lock_bh include/linux/spinlock.h:343 [inline] j1939_jsk_del+0x32/0x210 net/can/j1939/socket.c:89 j1939_sk_bind+0x2ea/0x8f0 net/can/j1939/socket.c:448 __sys_bind+0x239/0x290 net/socket.c:1648 __do_sys_bind net/socket.c:1659 [inline] __se_sys_bind net/socket.c:1657 [inline] __x64_sys_bind+0x73/0xb0 net/socket.c:1657 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x45a679 Code: ad b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f0559e97c78 EFLAGS: 00000246 ORIG_RAX: 0000000000000031 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 000000000045a679 RDX: 0000000000000018 RSI: 0000000020000240 RDI: 0000000000000003 RBP: 000000000075bf20 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f0559e986d4 R13: 00000000004c09e9 R14: 00000000004d37d0 R15: 00000000ffffffff Modules linked in: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 9844 at kernel/locking/mutex.c:1419 mutex_trylock+0x279/0x2f0 kernel/locking/mutex.c:1427 =============================================================================== This issues was caused by null pointer deference. Where j1939_sk_bind() was using currently not existing priv. Possible scenario may look as following: cpu0 cpu1 bind() bind() j1939_sk_bind() j1939_sk_bind() priv = jsk->priv; priv = jsk->priv; lock_sock(sock->sk); priv = j1939_netdev_start(ndev); j1939_jsk_add(priv, jsk); jsk->priv = priv; relase_sock(sock->sk); lock_sock(sock->sk); j1939_jsk_del(priv, jsk); ..... ooops ...... With this patch we move "priv = jsk->priv;" after the lock, to avoid assigning of wrong priv pointer. Reported-by: syzbot+99e9e1b200a1e363237d@syzkaller.appspotmail.com Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Cc: linux-stable <stable@vger.kernel.org> # >= v5.4 Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-11-13can: j1939: warn if resources are still linked on destroyOleksij Rempel
j1939_session_destroy() and __j1939_priv_release() should be called only if session, ecu or socket are not linked or used by any one else. If at least one of these resources is linked, then the reference counting is broken somewhere. This warning will be triggered before KASAN will do, and will make it easier to debug initial issue. This works on platforms without KASAN support. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
2019-11-13can: j1939: j1939_can_recv(): add priv refcountingOleksij Rempel
j1939_can_recv() can be called in parallel with socket release. In this case sk_release and sk_destruct can be done earlier than j1939_can_recv() is processed. Reported-by: syzbot+ca172a0ac477ac90f045@syzkaller.appspotmail.com Reported-by: syzbot+07ca5bce8530070a5650@syzkaller.appspotmail.com Reported-by: syzbot+a47537d3964ef6c874e1@syzkaller.appspotmail.com Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
2019-11-13can: j1939: transport: j1939_cancel_active_session(): use ↵Oleksij Rempel
hrtimer_try_to_cancel() instead of hrtimer_cancel() This part of the code protected by lock used in the hrtimer as well. Using hrtimer_cancel() will trigger dead lock. Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
2019-11-13can: j1939: make sure socket is held as long as session existsOleksij Rempel
We link the socket to the session to be able provide socket specific notifications. For example messages over error queue. We need to keep the socket held, while we have a reference to it. Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
2019-11-13can: j1939: transport: make sure the aborted session will be deactivated ↵Oleksij Rempel
only once j1939_session_cancel() was modifying session->state without protecting it by locks and without checking actual state of the session. This patch moves j1939_tp_set_rxtimeout() into j1939_session_cancel() and adds the missing locking. Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
2019-11-13can: j1939: socket: rework socket locking for j1939_sk_release() and ↵Oleksij Rempel
j1939_sk_sendmsg() j1939_sk_sendmsg() should be protected by lock_sock() to avoid race with j1939_sk_bind() and j1939_sk_release(). Reported-by: syzbot+afd421337a736d6c1ee6@syzkaller.appspotmail.com Reported-by: syzbot+6d04f6a1b31a0ae12ca9@syzkaller.appspotmail.com Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
2019-11-13can: j1939: main: j1939_ndev_to_priv(): avoid crash if can_ml_priv is NULLOleksij Rempel
This patch avoids a NULL pointer deref crash if ndev->ml_priv is NULL. Reported-by: syzbot+95c8e0d9dffde15b6c5c@syzkaller.appspotmail.com Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
2019-11-13can: j1939: move j1939_priv_put() into sk_destruct callbackOleksij Rempel
This patch delays the j1939_priv_put() until the socket is destroyed via the sk_destruct callback, to avoid use-after-free problems. Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
2019-11-13can: af_can: export can_sock_destruct()Oleksij Rempel
In j1939 we need our own struct sock::sk_destruct callback. Export the generic af_can can_sock_destruct() that allows us to chain-call it. Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-19 05:49:45 +0000