| Age | Commit message (Collapse) | Author |
|---|
|
Fix a race when multiple sockets are simultaneously calling sendto()
when the completion ring is shared in the SKB case. This is the case
when you share the same netdev and queue id through the
XDP_SHARED_UMEM bind flag. The problem is that multiple processes can
be in xsk_generic_xmit() and call the backpressure mechanism in
xskq_prod_reserve(xs->pool->cq). As this is a shared resource in this
specific scenario, a race might occur since the rings are
single-producer single-consumer.
Fix this by moving the tx_completion_lock from the socket to the pool
as the pool is shared between the sockets that share the completion
ring. (The pool is not shared when this is not the case.) And then
protect the accesses to xskq_prod_reserve() with this lock. The
tx_completion_lock is renamed cq_lock to better reflect that it
protects accesses to the potentially shared completion ring.
Fixes: 35fcde7f8deb ("xsk: support for Tx")
Reported-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Link: https://lore.kernel.org/bpf/20201218134525.13119-2-magnus.karlsson@gmail.com
|
|
Fix a possible memory leak at xsk socket close that is caused by the
refcounting of the umem object being wrong. The reference count of the
umem was decremented only after the pool had been freed. Note that if
the buffer pool is destroyed, it is important that the umem is
destroyed after the pool, otherwise the umem would disappear while the
driver is still running. And as the buffer pool needs to be destroyed
in a work queue, the umem is also (if its refcount reaches zero)
destroyed after the buffer pool in that same work queue.
What was missing is that the refcount also needs to be decremented
when the pool is not freed and when the pool has not even been
created. The first case happens when the refcount of the pool is
higher than 1, i.e. it is still being used by some other socket using
the same device and queue id. In this case, it is safe to decrement
the refcount of the umem outside of the work queue as the umem will
never be freed because the refcount of the umem is always greater than
or equal to the refcount of the buffer pool. The second case is if the
buffer pool has not been created yet, i.e. the socket was closed
before it was bound but after the umem was created. In this case, it
is safe to destroy the umem outside of the work queue, since there is
no pool that can use it by definition.
Fixes: 1c1efc2af158 ("xsk: Create and free buffer pool independently from umem")
Reported-by: syzbot+eb71df123dc2be2c1456@syzkaller.appspotmail.com
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Link: https://lore.kernel.org/bpf/1603801921-2712-1-git-send-email-magnus.karlsson@gmail.com
|
|
Add support to share a umem between queue ids on the same
device. This mode can be invoked with the XDP_SHARED_UMEM bind
flag. Previously, sharing was only supported within the same
queue id and device, and you shared one set of fill and
completion rings. However, note that when sharing a umem between
queue ids, you need to create a fill ring and a completion ring
and tie them to the socket before you do the bind with the
XDP_SHARED_UMEM flag. This so that the single-producer
single-consumer semantics can be upheld.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Link: https://lore.kernel.org/bpf/1598603189-32145-12-git-send-email-magnus.karlsson@intel.com
|
|
performance
Test for dma_need_sync earlier to increase
performance. xsk_buff_dma_sync_for_cpu() takes an xdp_buff as
parameter and from that the xsk_buff_pool reference is dug out. Perf
shows that this dereference causes a lot of cache misses. But as the
buffer pool is now sent down to the driver at zero-copy initialization
time, we might as well use this pointer directly, instead of going via
the xsk_buff and we can do so already in xsk_buff_dma_sync_for_cpu()
instead of in xp_dma_sync_for_cpu. This gets rid of these cache
misses.
Throughput increases with 3% for the xdpsock l2fwd sample application
on my machine.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Link: https://lore.kernel.org/bpf/1598603189-32145-11-git-send-email-magnus.karlsson@intel.com
|
|
Rearrange the xdp_sock, xdp_umem and xsk_buff_pool structures so
that they get smaller and align better to the cache lines. In the
previous commits of this patch set, these structs have been
reordered with the focus on functionality and simplicity, not
performance. This patch improves throughput performance by around
3%.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Link: https://lore.kernel.org/bpf/1598603189-32145-10-git-send-email-magnus.karlsson@intel.com
|
|
Enable the sharing of dma mappings by moving them out from the buffer
pool. Instead we put each dma mapped umem region in a list in the umem
structure. If dma has already been mapped for this umem and device, it
is not mapped again and the existing dma mappings are reused.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Link: https://lore.kernel.org/bpf/1598603189-32145-9-git-send-email-magnus.karlsson@intel.com
|
|
Move the xsk_tx_list and the xsk_tx_list_lock from the umem to
the buffer pool. This so that we in a later commit can share the
umem between multiple HW queues. There is one xsk_tx_list per
device and queue id, so it should be located in the buffer pool.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Link: https://lore.kernel.org/bpf/1598603189-32145-7-git-send-email-magnus.karlsson@intel.com
|
|
Move queue_id, dev, and need_wakeup from the umem to the
buffer pool. This so that we in a later commit can share the umem
between multiple HW queues. There is one buffer pool per dev and
queue id, so these variables should belong to the buffer pool, not
the umem. Need_wakeup is also something that is set on a per napi
level, so there is usually one per device and queue id. So move
this to the buffer pool too.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Link: https://lore.kernel.org/bpf/1598603189-32145-6-git-send-email-magnus.karlsson@intel.com
|
|
Move the fill and completion rings from the umem to the buffer
pool. This so that we in a later commit can share the umem
between multiple HW queue ids. In this case, we need one fill and
completion ring per queue id. As the buffer pool is per queue id
and napi id this is a natural place for it and one umem
struture can be shared between these buffer pools.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Link: https://lore.kernel.org/bpf/1598603189-32145-5-git-send-email-magnus.karlsson@intel.com
|
|
Create and free the buffer pool independently from the umem. Move
these operations that are performed on the buffer pool from the
umem create and destroy functions to new create and destroy
functions just for the buffer pool. This so that in later commits
we can instantiate multiple buffer pools per umem when sharing a
umem between HW queues and/or devices. We also erradicate the
back pointer from the umem to the buffer pool as this will not
work when we introduce the possibility to have multiple buffer
pools per umem.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Link: https://lore.kernel.org/bpf/1598603189-32145-4-git-send-email-magnus.karlsson@intel.com
|
|
Replace the explicit umem reference passed to the driver in AF_XDP
zero-copy mode with the buffer pool instead. This in preparation for
extending the functionality of the zero-copy mode so that umems can be
shared between queues on the same netdev and also between netdevs. In
this commit, only an umem reference has been added to the buffer pool
struct. But later commits will add other entities to it. These are
going to be entities that are different between different queue ids
and netdevs even though the umem is shared between them.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Link: https://lore.kernel.org/bpf/1598603189-32145-2-git-send-email-magnus.karlsson@intel.com
|
|
Invert the polarity and better name the flag so that the use case is
properly documented.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200629130359.2690853-3-hch@lst.de
|
|
In order to reduce the number of function calls, the struct
xsk_buff_pool definition is moved to xsk_buff_pool.h. The functions
xp_get_dma(), xp_dma_sync_for_cpu(), xp_dma_sync_for_device(),
xp_validate_desc() and various helper functions are explicitly
inlined.
Further, move xp_get_handle() and xp_release() to xsk.c, to allow for
the compiler to perform inlining.
rfc->v1: Make sure xp_validate_desc() is inlined for Tx perf. (Maxim)
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200520192103.355233-15-bjorn.topel@gmail.com
|
|
In order to simplify AF_XDP zero-copy enablement for NIC driver
developers, a new AF_XDP buffer allocation API is added. The
implementation is based on a single core (single producer/consumer)
buffer pool for the AF_XDP UMEM.
A buffer is allocated using the xsk_buff_alloc() function, and
returned using xsk_buff_free(). If a buffer is disassociated with the
pool, e.g. when a buffer is passed to an AF_XDP socket, a buffer is
said to be released. Currently, the release function is only used by
the AF_XDP internals and not visible to the driver.
Drivers using this API should register the XDP memory model with the
new MEM_TYPE_XSK_BUFF_POOL type.
The API is defined in net/xdp_sock_drv.h.
The buffer type is struct xdp_buff, and follows the lifetime of
regular xdp_buffs, i.e. the lifetime of an xdp_buff is restricted to
a NAPI context. In other words, the API is not replacing xdp_frames.
In addition to introducing the API and implementations, the AF_XDP
core is migrated to use the new APIs.
rfc->v1: Fixed build errors/warnings for m68k and riscv. (kbuild test
robot)
Added headroom/chunk size getter. (Maxim/Björn)
v1->v2: Swapped SoBs. (Maxim)
v2->v3: Initialize struct xdp_buff member frame_sz. (Björn)
Add API to query the DMA address of a frame. (Maxim)
Do DMA sync for CPU till the end of the frame to handle
possible growth (frame_sz). (Maxim)
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200520192103.355233-6-bjorn.topel@gmail.com
|
