| Age | Commit message (Collapse) | Author |
|---|
|
This moves the bpf_sock_from_file definition into net/core/filter.c
which only gets compiled with CONFIG_NET and also moves the helper proto
usage next to other tracing helpers that are conditional on CONFIG_NET.
This avoids
ld: kernel/trace/bpf_trace.o: in function `bpf_sock_from_file':
bpf_trace.c:(.text+0xe23): undefined reference to `sock_from_file'
When compiling a kernel with BPF and without NET.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Florent Revest <revest@chromium.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: KP Singh <kpsingh@kernel.org>
Link: https://lore.kernel.org/bpf/20201208173623.1136863-1-revest@chromium.org
|
|
Remove a permeating assumption thoughout BPF verifier of vmlinux BTF. Instead,
wherever BTF type IDs are involved, also track the instance of struct btf that
goes along with the type ID. This allows to gradually add support for kernel
module BTFs and using/tracking module types across BPF helper calls and
registers.
This patch also renames btf_id() function to btf_obj_id() to minimize naming
clash with using btf_id to denote BTF *type* ID, rather than BTF *object*'s ID.
Also, altough btf_vmlinux can't get destructed and thus doesn't need
refcounting, module BTFs need that, so apply BTF refcounting universally when
BPF program is using BTF-powered attachment (tp_btf, fentry/fexit, etc). This
makes for simpler clean up code.
Now that BTF type ID is not enough to uniquely identify a BTF type, extend BPF
trampoline key to include BTF object ID. To differentiate that from target
program BPF ID, set 31st bit of type ID. BTF type IDs (at least currently) are
not allowed to take full 32 bits, so there is no danger of confusing that bit
with a valid BTF type ID.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201203204634.1325171-10-andrii@kernel.org
|
|
Do not use rlimit-based memory accounting for bpf progs. It has been
replaced with memcg-based memory accounting.
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20201201215900.3569844-34-guro@fb.com
|
|
Remove rlimit-based accounting infrastructure code, which is not used
anymore.
To provide a backward compatibility, use an approximation of the
bpf map memory footprint as a "memlock" value, available to a user
via map info. The approximation is based on the maximal number of
elements and key and value sizes.
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20201201215900.3569844-33-guro@fb.com
|
|
Bpf maps can be updated from an interrupt context and in such
case there is no process which can be charged. It makes the memory
accounting of bpf maps non-trivial.
Fortunately, after commit 4127c6504f25 ("mm: kmem: enable kernel
memcg accounting from interrupt contexts") and commit b87d8cefe43c
("mm, memcg: rework remote charging API to support nesting")
it's finally possible.
To make the ownership model simple and consistent, when the map
is created, the memory cgroup of the current process is recorded.
All subsequent allocations related to the bpf map are charged to
the same memory cgroup. It includes allocations made by any processes
(even if they do belong to a different cgroup) and from interrupts.
This commit introduces 3 new helpers, which will be used by following
commits to enable the accounting of bpf maps memory:
- bpf_map_kmalloc_node()
- bpf_map_kzalloc()
- bpf_map_alloc_percpu()
They are wrapping popular memory allocation functions. They set
the active memory cgroup to the map's memory cgroup and add
__GFP_ACCOUNT to the passed gfp flags. Then they call into
the corresponding memory allocation function and restore
the original active memory cgroup.
These helpers are supposed to use everywhere except the map creation
path. During the map creation when the map structure is allocated by
itself, it cannot be passed to those helpers. In those cases default
memory allocation function will be used with the __GFP_ACCOUNT flag.
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201201215900.3569844-7-guro@fb.com
|
|
The helper uses CLOCK_MONOTONIC_COARSE source of time that is less
accurate but more performant.
We have a BPF CGROUP_SKB firewall that supports event logging through
bpf_perf_event_output(). Each event has a timestamp and currently we use
bpf_ktime_get_ns() for it. Use of bpf_ktime_get_coarse_ns() saves ~15-20
ns in time required for event logging.
bpf_ktime_get_ns():
EgressLogByRemoteEndpoint 113.82ns 8.79M
bpf_ktime_get_coarse_ns():
EgressLogByRemoteEndpoint 95.40ns 10.48M
Signed-off-by: Dmitrii Banshchikov <me@ubique.spb.ru>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20201117184549.257280-1-me@ubique.spb.ru
|
|
Add kernel module listener that will load/validate and unload module BTF.
Module BTFs gets ID generated for them, which makes it possible to iterate
them with existing BTF iteration API. They are given their respective module's
names, which will get reported through GET_OBJ_INFO API. They are also marked
as in-kernel BTFs for tooling to distinguish them from user-provided BTFs.
Also, similarly to vmlinux BTF, kernel module BTFs are exposed through
sysfs as /sys/kernel/btf/<module-name>. This is convenient for user-space
tools to inspect module BTF contents and dump their types with existing tools:
[vmuser@archvm bpf]$ ls -la /sys/kernel/btf
total 0
drwxr-xr-x 2 root root 0 Nov 4 19:46 .
drwxr-xr-x 13 root root 0 Nov 4 19:46 ..
...
-r--r--r-- 1 root root 888 Nov 4 19:46 irqbypass
-r--r--r-- 1 root root 100225 Nov 4 19:46 kvm
-r--r--r-- 1 root root 35401 Nov 4 19:46 kvm_intel
-r--r--r-- 1 root root 120 Nov 4 19:46 pcspkr
-r--r--r-- 1 root root 399 Nov 4 19:46 serio_raw
-r--r--r-- 1 root root 4094095 Nov 4 19:46 vmlinux
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/bpf/20201110011932.3201430-5-andrii@kernel.org
|
|
The currently available bpf_get_current_task returns an unsigned integer
which can be used along with BPF_CORE_READ to read data from
the task_struct but still cannot be used as an input argument to a
helper that accepts an ARG_PTR_TO_BTF_ID of type task_struct.
In order to implement this helper a new return type, RET_PTR_TO_BTF_ID,
is added. This is similar to RET_PTR_TO_BTF_ID_OR_NULL but does not
require checking the nullness of returned pointer.
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20201106103747.2780972-6-kpsingh@chromium.org
|
|
Commit e679654a704e ("bpf: Fix a rcu_sched stall issue with
bpf task/task_file iterator") tries to fix rcu stalls warning
which is caused by bpf task_file iterator when running
"bpftool prog".
rcu: INFO: rcu_sched self-detected stall on CPU
rcu: \x097-....: (20999 ticks this GP) idle=302/1/0x4000000000000000 softirq=1508852/1508852 fqs=4913
\x09(t=21031 jiffies g=2534773 q=179750)
NMI backtrace for cpu 7
CPU: 7 PID: 184195 Comm: bpftool Kdump: loaded Tainted: G W 5.8.0-00004-g68bfc7f8c1b4 #6
Hardware name: Quanta Twin Lakes MP/Twin Lakes Passive MP, BIOS F09_3A17 05/03/2019
Call Trace:
<IRQ>
dump_stack+0x57/0x70
nmi_cpu_backtrace.cold+0x14/0x53
? lapic_can_unplug_cpu.cold+0x39/0x39
nmi_trigger_cpumask_backtrace+0xb7/0xc7
rcu_dump_cpu_stacks+0xa2/0xd0
rcu_sched_clock_irq.cold+0x1ff/0x3d9
? tick_nohz_handler+0x100/0x100
update_process_times+0x5b/0x90
tick_sched_timer+0x5e/0xf0
__hrtimer_run_queues+0x12a/0x2a0
hrtimer_interrupt+0x10e/0x280
__sysvec_apic_timer_interrupt+0x51/0xe0
asm_call_on_stack+0xf/0x20
</IRQ>
sysvec_apic_timer_interrupt+0x6f/0x80
...
task_file_seq_next+0x52/0xa0
bpf_seq_read+0xb9/0x320
vfs_read+0x9d/0x180
ksys_read+0x5f/0xe0
do_syscall_64+0x38/0x60
entry_SYSCALL_64_after_hwframe+0x44/0xa9
The fix is to limit the number of bpf program runs to be
one million. This fixed the program in most cases. But
we also found under heavy load, which can increase the wallclock
time for bpf_seq_read(), the warning may still be possible.
For example, calling bpf_delay() in the "while" loop of
bpf_seq_read(), which will introduce artificial delay,
the warning will show up in my qemu run.
static unsigned q;
volatile unsigned *p = &q;
volatile unsigned long long ll;
static void bpf_delay(void)
{
int i, j;
for (i = 0; i < 10000; i++)
for (j = 0; j < 10000; j++)
ll += *p;
}
There are two ways to fix this issue. One is to reduce the above
one million threshold to say 100,000 and hopefully rcu warning will
not show up any more. Another is to introduce a target feature
which enables bpf_seq_read() calling cond_resched().
This patch took second approach as the first approach may cause
more -EAGAIN failures for read() syscalls. Note that not all bpf_iter
targets can permit cond_resched() in bpf_seq_read() as some, e.g.,
netlink seq iterator, rcu read lock critical section spans through
seq_ops->next() -> seq_ops->show() -> seq_ops->next().
For the kernel code with the above hack, "bpftool p" roughly takes
38 seconds to finish on my VM with 184 bpf program runs.
Using the following command, I am able to collect the number of
context switches:
perf stat -e context-switches -- ./bpftool p >& log
Without this patch,
69 context-switches
With this patch,
75 context-switches
This patch added additional 6 context switches, roughly every 6 seconds
to reschedule, to avoid lengthy no-rescheduling which may cause the
above RCU warnings.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201028061054.1411116-1-yhs@fb.com
|
|
Recent work in f4d05259213f ("bpf: Add map_meta_equal map ops") and 134fede4eecf
("bpf: Relax max_entries check for most of the inner map types") added support
for dynamic inner max elements for most map-in-map types. Exceptions were maps
like array or prog array where the map_gen_lookup() callback uses the maps'
max_entries field as a constant when emitting instructions.
We recently implemented Maglev consistent hashing into Cilium's load balancer
which uses map-in-map with an outer map being hash and inner being array holding
the Maglev backend table for each service. This has been designed this way in
order to reduce overall memory consumption given the outer hash map allows to
avoid preallocating a large, flat memory area for all services. Also, the
number of service mappings is not always known a-priori.
The use case for dynamic inner array map entries is to further reduce memory
overhead, for example, some services might just have a small number of back
ends while others could have a large number. Right now the Maglev backend table
for small and large number of backends would need to have the same inner array
map entries which adds a lot of unneeded overhead.
Dynamic inner array map entries can be realized by avoiding the inlined code
generation for their lookup. The lookup will still be efficient since it will
be calling into array_map_lookup_elem() directly and thus avoiding retpoline.
The patch adds a BPF_F_INNER_MAP flag to map creation which therefore skips
inline code generation and relaxes array_map_meta_equal() check to ignore both
maps' max_entries. This also still allows to have faster lookups for map-in-map
when BPF_F_INNER_MAP is not specified and hence dynamic max_entries not needed.
Example code generation where inner map is dynamic sized array:
# bpftool p d x i 125
int handle__sys_enter(void * ctx):
; int handle__sys_enter(void *ctx)
0: (b4) w1 = 0
; int key = 0;
1: (63) *(u32 *)(r10 -4) = r1
2: (bf) r2 = r10
;
3: (07) r2 += -4
; inner_map = bpf_map_lookup_elem(&outer_arr_dyn, &key);
4: (18) r1 = map[id:468]
6: (07) r1 += 272
7: (61) r0 = *(u32 *)(r2 +0)
8: (35) if r0 >= 0x3 goto pc+5
9: (67) r0 <<= 3
10: (0f) r0 += r1
11: (79) r0 = *(u64 *)(r0 +0)
12: (15) if r0 == 0x0 goto pc+1
13: (05) goto pc+1
14: (b7) r0 = 0
15: (b4) w6 = -1
; if (!inner_map)
16: (15) if r0 == 0x0 goto pc+6
17: (bf) r2 = r10
;
18: (07) r2 += -4
; val = bpf_map_lookup_elem(inner_map, &key);
19: (bf) r1 = r0 | No inlining but instead
20: (85) call array_map_lookup_elem#149280 | call to array_map_lookup_elem()
; return val ? *val : -1; | for inner array lookup.
21: (15) if r0 == 0x0 goto pc+1
; return val ? *val : -1;
22: (61) r6 = *(u32 *)(r0 +0)
; }
23: (bc) w0 = w6
24: (95) exit
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201010234006.7075-4-daniel@iogearbox.net
|
|
Add bpf_this_cpu_ptr() to help access percpu var on this cpu. This
helper always returns a valid pointer, therefore no need to check
returned value for NULL. Also note that all programs run with
preemption disabled, which means that the returned pointer is stable
during all the execution of the program.
Signed-off-by: Hao Luo <haoluo@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200929235049.2533242-6-haoluo@google.com
|
|
Add bpf_per_cpu_ptr() to help bpf programs access percpu vars.
bpf_per_cpu_ptr() has the same semantic as per_cpu_ptr() in the kernel
except that it may return NULL. This happens when the cpu parameter is
out of range. So the caller must check the returned value.
Signed-off-by: Hao Luo <haoluo@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200929235049.2533242-5-haoluo@google.com
|
|
This enables support for attaching freplace programs to multiple attach
points. It does this by amending the UAPI for bpf_link_Create with a target
btf ID that can be used to supply the new attachment point along with the
target program fd. The target must be compatible with the target that was
supplied at program load time.
The implementation reuses the checks that were factored out of
check_attach_btf_id() to ensure compatibility between the BTF types of the
old and new attachment. If these match, a new bpf_tracing_link will be
created for the new attach target, allowing multiple attachments to
co-exist simultaneously.
The code could theoretically support multiple-attach of other types of
tracing programs as well, but since I don't have a use case for any of
those, there is no API support for doing so.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/160138355169.48470.17165680973640685368.stgit@toke.dk
|
|
In preparation for allowing multiple attachments of freplace programs, move
the references to the target program and trampoline into the
bpf_tracing_link structure when that is created. To do this atomically,
introduce a new mutex in prog->aux to protect writing to the two pointers
to target prog and trampoline, and rename the members to make it clear that
they are related.
With this change, it is no longer possible to attach the same tracing
program multiple times (detaching in-between), since the reference from the
tracing program to the target disappears on the first attach. However,
since the next patch will let the caller supply an attach target, that will
also make it possible to attach to the same place multiple times.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/160138355059.48470.2503076992210324984.stgit@toke.dk
|
|
A helper is added to support tracing kernel type information in BPF
using the BPF Type Format (BTF). Its signature is
long bpf_snprintf_btf(char *str, u32 str_size, struct btf_ptr *ptr,
u32 btf_ptr_size, u64 flags);
struct btf_ptr * specifies
- a pointer to the data to be traced
- the BTF id of the type of data pointed to
- a flags field is provided for future use; these flags
are not to be confused with the BTF_F_* flags
below that control how the btf_ptr is displayed; the
flags member of the struct btf_ptr may be used to
disambiguate types in kernel versus module BTF, etc;
the main distinction is the flags relate to the type
and information needed in identifying it; not how it
is displayed.
For example a BPF program with a struct sk_buff *skb
could do the following:
static struct btf_ptr b = { };
b.ptr = skb;
b.type_id = __builtin_btf_type_id(struct sk_buff, 1);
bpf_snprintf_btf(str, sizeof(str), &b, sizeof(b), 0, 0);
Default output looks like this:
(struct sk_buff){
.transport_header = (__u16)65535,
.mac_header = (__u16)65535,
.end = (sk_buff_data_t)192,
.head = (unsigned char *)0x000000007524fd8b,
.data = (unsigned char *)0x000000007524fd8b,
.truesize = (unsigned int)768,
.users = (refcount_t){
.refs = (atomic_t){
.counter = (int)1,
},
},
}
Flags modifying display are as follows:
- BTF_F_COMPACT: no formatting around type information
- BTF_F_NONAME: no struct/union member names/types
- BTF_F_PTR_RAW: show raw (unobfuscated) pointer values;
equivalent to %px.
- BTF_F_ZERO: show zero-valued struct/union members;
they are not displayed by default
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/1601292670-1616-4-git-send-email-alan.maguire@oracle.com
|
|
It will be used later for BPF structure display support
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/1601292670-1616-2-git-send-email-alan.maguire@oracle.com
|
|
The check_attach_btf_id() function really does three things:
1. It performs a bunch of checks on the program to ensure that the
attachment is valid.
2. It stores a bunch of state about the attachment being requested in
the verifier environment and struct bpf_prog objects.
3. It allocates a trampoline for the attachment.
This patch splits out (1.) and (3.) into separate functions which will
perform the checks, but return the computed values instead of directly
modifying the environment. This is done in preparation for reusing the
checks when the actual attachment is happening, which will allow tracing
programs to have multiple (compatible) attachments.
This also fixes a bug where a bunch of checks were skipped if a trampoline
already existed for the tracing target.
Fixes: 6ba43b761c41 ("bpf: Attachment verification for BPF_MODIFY_RETURN")
Fixes: 1e6c62a88215 ("bpf: Introduce sleepable BPF programs")
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
In preparation for moving code around, change a bunch of references to
env->log (and the verbose() logging helper) to use bpf_log() and a direct
pointer to struct bpf_verifier_log. While we're touching the function
signature, mark the 'prog' argument to bpf_check_type_match() as const.
Also enhance the bpf_verifier_log_needed() check to handle NULL pointers
for the log struct so we can re-use the code with logging disabled.
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add .test_run for raw_tracepoint. Also, introduce a new feature that runs
the target program on a specific CPU. This is achieved by a new flag in
bpf_attr.test, BPF_F_TEST_RUN_ON_CPU. When this flag is set, the program
is triggered on cpu with id bpf_attr.test.cpu. This feature is needed for
BPF programs that handle perf_event and other percpu resources, as the
program can access these resource locally.
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200925205432.1777-2-songliubraving@fb.com
|
|
The meaning of PTR_TO_BTF_ID_OR_NULL differs slightly from other types
denoted with the *_OR_NULL type. For example the types PTR_TO_SOCKET
and PTR_TO_SOCKET_OR_NULL can be used for branch analysis because the
type PTR_TO_SOCKET is guaranteed to _not_ have a null value.
In contrast PTR_TO_BTF_ID and BTF_TO_BTF_ID_OR_NULL have slightly
different meanings. A PTR_TO_BTF_TO_ID may be a pointer to NULL value,
but it is safe to read this pointer in the program context because
the program context will handle any faults. The fallout is for
PTR_TO_BTF_ID the verifier can assume reads are safe, but can not
use the type in branch analysis. Additionally, authors need to be
extra careful when passing PTR_TO_BTF_ID into helpers. In general
helpers consuming type PTR_TO_BTF_ID will need to assume it may
be null.
Seeing the above is not obvious to readers without the back knowledge
lets add a comment in the type definition.
Editorial comment, as networking and tracing programs get closer
and more tightly merged we may need to consider a new type that we
can ensure is non-null for branch analysis and also passing into
helpers.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Lorenz Bauer <lmb@cloudflare.com>
|
|
There is a constant need to add more fields into the bpf_tcp_sock
for the bpf programs running at tc, sock_ops...etc.
A current workaround could be to use bpf_probe_read_kernel(). However,
other than making another helper call for reading each field and missing
CO-RE, it is also not as intuitive to use as directly reading
"tp->lsndtime" for example. While already having perfmon cap to do
bpf_probe_read_kernel(), it will be much easier if the bpf prog can
directly read from the tcp_sock.
This patch tries to do that by using the existing casting-helpers
bpf_skc_to_*() whose func_proto returns a btf_id. For example, the
func_proto of bpf_skc_to_tcp_sock returns the btf_id of the
kernel "struct tcp_sock".
These helpers are also added to is_ptr_cast_function().
It ensures the returning reg (BPF_REF_0) will also carries the ref_obj_id.
That will keep the ref-tracking works properly.
The bpf_skc_to_* helpers are made available to most of the bpf prog
types in filter.c. The bpf_skc_to_* helpers will be limited by
perfmon cap.
This patch adds a ARG_PTR_TO_BTF_ID_SOCK_COMMON. The helper accepting
this arg can accept a btf-id-ptr (PTR_TO_BTF_ID + &btf_sock_ids[BTF_SOCK_TYPE_SOCK_COMMON])
or a legacy-ctx-convert-skc-ptr (PTR_TO_SOCK_COMMON). The bpf_skc_to_*()
helpers are changed to take ARG_PTR_TO_BTF_ID_SOCK_COMMON such that
they will accept pointer obtained from skb->sk.
Instead of specifying both arg_type and arg_btf_id in the same func_proto
which is how the current ARG_PTR_TO_BTF_ID does, the arg_btf_id of
the new ARG_PTR_TO_BTF_ID_SOCK_COMMON is specified in the
compatible_reg_types[] in verifier.c. The reason is the arg_btf_id is
always the same. Discussion in this thread:
https://lore.kernel.org/bpf/20200922070422.1917351-1-kafai@fb.com/
The ARG_PTR_TO_BTF_ID_ part gives a clear expectation that the helper is
expecting a PTR_TO_BTF_ID which could be NULL. This is the same
behavior as the existing helper taking ARG_PTR_TO_BTF_ID.
The _SOCK_COMMON part means the helper is also expecting the legacy
SOCK_COMMON pointer.
By excluding the _OR_NULL part, the bpf prog cannot call helper
with a literal NULL which doesn't make sense in most cases.
e.g. bpf_skc_to_tcp_sock(NULL) will be rejected. All PTR_TO_*_OR_NULL
reg has to do a NULL check first before passing into the helper or else
the bpf prog will be rejected. This behavior is nothing new and
consistent with the current expectation during bpf-prog-load.
[ ARG_PTR_TO_BTF_ID_SOCK_COMMON will be used to replace
ARG_PTR_TO_SOCK* of other existing helpers later such that
those existing helpers can take the PTR_TO_BTF_ID returned by
the bpf_skc_to_*() helpers.
The only special case is bpf_sk_lookup_assign() which can accept a
literal NULL ptr. It has to be handled specially in another follow
up patch if there is a need (e.g. by renaming ARG_PTR_TO_SOCKET_OR_NULL
to ARG_PTR_TO_BTF_ID_SOCK_COMMON_OR_NULL). ]
[ When converting the older helpers that take ARG_PTR_TO_SOCK* in
the later patch, if the kernel does not support BTF,
ARG_PTR_TO_BTF_ID_SOCK_COMMON will behave like ARG_PTR_TO_SOCK_COMMON
because no reg->type could have PTR_TO_BTF_ID in this case.
It is not a concern for the newer-btf-only helper like the bpf_skc_to_*()
here though because these helpers must require BTF vmlinux to begin
with. ]
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200925000350.3855720-1-kafai@fb.com
|
|
The mapping between bpf_arg_type and bpf_reg_type is encoded in a big
hairy if statement that is hard to follow. The debug output also leaves
to be desired: if a reg_type doesn't match we only print one of the
options, instead printing all the valid ones.
Convert the if statement into a table which is then used to drive type
checking. If none of the reg_types match we print all options, e.g.:
R2 type=rdonly_buf expected=fp, pkt, pkt_meta, map_value
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200921121227.255763-12-lmb@cloudflare.com
|
|
Function prototypes using ARG_PTR_TO_BTF_ID currently use two ways to signal
which BTF IDs are acceptable. First, bpf_func_proto.btf_id is an array of
IDs, one for each argument. This array is only accessed up to the highest
numbered argument that uses ARG_PTR_TO_BTF_ID and may therefore be less than
five arguments long. It usually points at a BTF_ID_LIST. Second, check_btf_id
is a function pointer that is called by the verifier if present. It gets the
actual BTF ID of the register, and the argument number we're currently checking.
It turns out that the only user check_arg_btf_id ignores the argument, and is
simply used to check whether the BTF ID has a struct sock_common at it's start.
Replace both of these mechanisms with an explicit BTF ID for each argument
in a function proto. Thanks to btf_struct_ids_match this is very flexible:
check_arg_btf_id can be replaced by requiring struct sock_common.
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200921121227.255763-5-lmb@cloudflare.com
|
|
bsearch doesn't modify the contents of the array, so we can take a const pointer.
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200921121227.255763-2-lmb@cloudflare.com
|
|
This commit serves two things:
1) it optimizes BPF prologue/epilogue generation
2) it makes possible to have tailcalls within BPF subprogram
Both points are related to each other since without 1), 2) could not be
achieved.
In [1], Alexei says:
"The prologue will look like:
nop5
xor eax,eax // two new bytes if bpf_tail_call() is used in this
// function
push rbp
mov rbp, rsp
sub rsp, rounded_stack_depth
push rax // zero init tail_call counter
variable number of push rbx,r13,r14,r15
Then bpf_tail_call will pop variable number rbx,..
and final 'pop rax'
Then 'add rsp, size_of_current_stack_frame'
jmp to next function and skip over 'nop5; xor eax,eax; push rpb; mov
rbp, rsp'
This way new function will set its own stack size and will init tail
call
counter with whatever value the parent had.
If next function doesn't use bpf_tail_call it won't have 'xor eax,eax'.
Instead it would need to have 'nop2' in there."
Implement that suggestion.
Since the layout of stack is changed, tail call counter handling can not
rely anymore on popping it to rbx just like it have been handled for
constant prologue case and later overwrite of rbx with actual value of
rbx pushed to stack. Therefore, let's use one of the register (%rcx) that
is considered to be volatile/caller-saved and pop the value of tail call
counter in there in the epilogue.
Drop the BUILD_BUG_ON in emit_prologue and in
emit_bpf_tail_call_indirect where instruction layout is not constant
anymore.
Introduce new poke target, 'tailcall_bypass' to poke descriptor that is
dedicated for skipping the register pops and stack unwind that are
generated right before the actual jump to target program.
For case when the target program is not present, BPF program will skip
the pop instructions and nop5 dedicated for jmpq $target. An example of
such state when only R6 of callee saved registers is used by program:
ffffffffc0513aa1: e9 0e 00 00 00 jmpq 0xffffffffc0513ab4
ffffffffc0513aa6: 5b pop %rbx
ffffffffc0513aa7: 58 pop %rax
ffffffffc0513aa8: 48 81 c4 00 00 00 00 add $0x0,%rsp
ffffffffc0513aaf: 0f 1f 44 00 00 nopl 0x0(%rax,%rax,1)
ffffffffc0513ab4: 48 89 df mov %rbx,%rdi
When target program is inserted, the jump that was there to skip
pops/nop5 will become the nop5, so CPU will go over pops and do the
actual tailcall.
One might ask why there simply can not be pushes after the nop5?
In the following example snippet:
ffffffffc037030c: 48 89 fb mov %rdi,%rbx
(...)
ffffffffc0370332: 5b pop %rbx
ffffffffc0370333: 58 pop %rax
ffffffffc0370334: 48 81 c4 00 00 00 00 add $0x0,%rsp
ffffffffc037033b: 0f 1f 44 00 00 nopl 0x0(%rax,%rax,1)
ffffffffc0370340: 48 81 ec 00 00 00 00 sub $0x0,%rsp
ffffffffc0370347: 50 push %rax
ffffffffc0370348: 53 push %rbx
ffffffffc0370349: 48 89 df mov %rbx,%rdi
ffffffffc037034c: e8 f7 21 00 00 callq 0xffffffffc0372548
There is the bpf2bpf call (at ffffffffc037034c) right after the tailcall
and jump target is not present. ctx is in %rbx register and BPF
subprogram that we will call into on ffffffffc037034c is relying on it,
e.g. it will pick ctx from there. Such code layout is therefore broken
as we would overwrite the content of %rbx with the value that was pushed
on the prologue. That is the reason for the 'bypass' approach.
Special care needs to be taken during the install/update/remove of
tailcall target. In case when target program is not present, the CPU
must not execute the pop instructions that precede the tailcall.
To address that, the following states can be defined:
A nop, unwind, nop
B nop, unwind, tail
C skip, unwind, nop
D skip, unwind, tail
A is forbidden (lead to incorrectness). The state transitions between
tailcall install/update/remove will work as follows:
First install tail call f: C->D->B(f)
* poke the tailcall, after that get rid of the skip
Update tail call f to f': B(f)->B(f')
* poke the tailcall (poke->tailcall_target) and do NOT touch the
poke->tailcall_bypass
Remove tail call: B(f')->C(f')
* poke->tailcall_bypass is poked back to jump, then we wait the RCU
grace period so that other programs will finish its execution and
after that we are safe to remove the poke->tailcall_target
Install new tail call (f''): C(f')->D(f'')->B(f'').
* same as first step
This way CPU can never be exposed to "unwind, tail" state.
Last but not least, when tailcalls get mixed with bpf2bpf calls, it
would be possible to encounter the endless loop due to clearing the
tailcall counter if for example we would use the tailcall3-like from BPF
selftests program that would be subprogram-based, meaning the tailcall
would be present within the BPF subprogram.
This test, broken down to particular steps, would do:
entry -> set tailcall counter to 0, bump it by 1, tailcall to func0
func0 -> call subprog_tail
(we are NOT skipping the first 11 bytes of prologue and this subprogram
has a tailcall, therefore we clear the counter...)
subprog -> do the same thing as entry
and then loop forever.
To address this, the idea is to go through the call chain of bpf2bpf progs
and look for a tailcall presence throughout whole chain. If we saw a single
tail call then each node in this call chain needs to be marked as a subprog
that can reach the tailcall. We would later feed the JIT with this info
and:
- set eax to 0 only when tailcall is reachable and this is the entry prog
- if tailcall is reachable but there's no tailcall in insns of currently
JITed prog then push rax anyway, so that it will be possible to
propagate further down the call chain
- finally if tailcall is reachable, then we need to precede the 'call'
insn with mov rax, [rbp - (stack_depth + 8)]
Tail call related cases from test_verifier kselftest are also working
fine. Sample BPF programs that utilize tail calls (sockex3, tracex5)
work properly as well.
[1]: https://lore.kernel.org/bpf/20200517043227.2gpq22ifoq37ogst@ast-mbp.dhcp.thefacebook.com/
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Reflect the actual purpose of poke->ip and rename it to
poke->tailcall_target so that it will not the be confused with another
poke target that will be introduced in next commit.
While at it, do the same thing with poke->ip_stable - rename it to
poke->tailcall_target_stable.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Previously, there was no need for poke descriptors being present in
subprogram's bpf_prog_aux struct since tailcalls were simply not allowed
in them. Each subprog is JITed independently so in order to enable
JITing subprograms that use tailcalls, do the following:
- in fixup_bpf_calls() store the index of tailcall insn onto the generated
poke descriptor,
- in case when insn patching occurs, adjust the tailcall insn idx from
bpf_patch_insn_data,
- then in jit_subprogs() check whether the given poke descriptor belongs
to the current subprog by checking if that previously stored absolute
index of tail call insn is in the scope of the insns of given subprog,
- update the insn->imm with new poke descriptor slot so that while JITing
the proper poke descriptor will be grabbed
This way each of the main program's poke descriptors are distributed
across the subprograms poke descriptor array, so main program's
descriptors can be untracked out of the prog array map.
Add also subprog's aux struct to the BPF map poke_progs list by calling
on it map_poke_track().
In case of any error, call the map_poke_untrack() on subprog's aux
structs that have already been registered to prog array map.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
To support modifying the used_maps array, we use a mutex to protect
the use of the counter and the array. The mutex is initialized right
after the prog aux is allocated, and destroyed right before prog
aux is freed. This way we guarantee it's initialized for both cBPF
and eBPF.
Signed-off-by: YiFei Zhu <zhuyifei@google.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Cc: YiFei Zhu <zhuyifei1999@gmail.com>
Link: https://lore.kernel.org/bpf/20200915234543.3220146-2-sdf@google.com
|
|
Sleepable BPF programs can now use copy_from_user() to access user memory.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: KP Singh <kpsingh@google.com>
Link: https://lore.kernel.org/bpf/20200827220114.69225-4-alexei.starovoitov@gmail.com
|
|
Introduce sleepable BPF programs that can request such property for themselves
via BPF_F_SLEEPABLE flag at program load time. In such case they will be able
to use helpers like bpf_copy_from_user() that might sleep. At present only
fentry/fexit/fmod_ret and lsm programs can request to be sleepable and only
when they are attached to kernel functions that are known to allow sleeping.
The non-sleepable programs are relying on implicit rcu_read_lock() and
migrate_disable() to protect life time of programs, maps that they use and
per-cpu kernel structures used to pass info between bpf programs and the
kernel. The sleepable programs cannot be enclosed into rcu_read_lock().
migrate_disable() maps to preempt_disable() in non-RT kernels, so the progs
should not be enclosed in migrate_disable() as well. Therefore
rcu_read_lock_trace is used to protect the life time of sleepable progs.
There are many networking and tracing program types. In many cases the
'struct bpf_prog *' pointer itself is rcu protected within some other kernel
data structure and the kernel code is using rcu_dereference() to load that
program pointer and call BPF_PROG_RUN() on it. All these cases are not touched.
Instead sleepable bpf programs are allowed with bpf trampoline only. The
program pointers are hard-coded into generated assembly of bpf trampoline and
synchronize_rcu_tasks_trace() is used to protect the life time of the program.
The same trampoline can hold both sleepable and non-sleepable progs.
When rcu_read_lock_trace is held it means that some sleepable bpf program is
running from bpf trampoline. Those programs can use bpf arrays and preallocated
hash/lru maps. These map types are waiting on programs to complete via
synchronize_rcu_tasks_trace();
Updates to trampoline now has to do synchronize_rcu_tasks_trace() and
synchronize_rcu_tasks() to wait for sleepable progs to finish and for
trampoline assembly to finish.
This is the first step of introducing sleepable progs. Eventually dynamically
allocated hash maps can be allowed and networking program types can become
sleepable too.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: KP Singh <kpsingh@google.com>
Link: https://lore.kernel.org/bpf/20200827220114.69225-3-alexei.starovoitov@gmail.com
|
|
Some properties of the inner map is used in the verification time.
When an inner map is inserted to an outer map at runtime,
bpf_map_meta_equal() is currently used to ensure those properties
of the inserting inner map stays the same as the verification
time.
In particular, the current bpf_map_meta_equal() checks max_entries which
turns out to be too restrictive for most of the maps which do not use
max_entries during the verification time. It limits the use case that
wants to replace a smaller inner map with a larger inner map. There are
some maps do use max_entries during verification though. For example,
the map_gen_lookup in array_map_ops uses the max_entries to generate
the inline lookup code.
To accommodate differences between maps, the map_meta_equal is added
to bpf_map_ops. Each map-type can decide what to check when its
map is used as an inner map during runtime.
Also, some map types cannot be used as an inner map and they are
currently black listed in bpf_map_meta_alloc() in map_in_map.c.
It is not unusual that the new map types may not aware that such
blacklist exists. This patch enforces an explicit opt-in
and only allows a map to be used as an inner map if it has
implemented the map_meta_equal ops. It is based on the
discussion in [1].
All maps that support inner map has its map_meta_equal points
to bpf_map_meta_equal in this patch. A later patch will
relax the max_entries check for most maps. bpf_types.h
counts 28 map types. This patch adds 23 ".map_meta_equal"
by using coccinelle. -5 for
BPF_MAP_TYPE_PROG_ARRAY
BPF_MAP_TYPE_(PERCPU)_CGROUP_STORAGE
BPF_MAP_TYPE_STRUCT_OPS
BPF_MAP_TYPE_ARRAY_OF_MAPS
BPF_MAP_TYPE_HASH_OF_MAPS
The "if (inner_map->inner_map_meta)" check in bpf_map_meta_alloc()
is moved such that the same error is returned.
[1]: https://lore.kernel.org/bpf/20200522022342.899756-1-kafai@fb.com/
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200828011806.1970400-1-kafai@fb.com
|
|
Adding support to define sorted set of BTF ID values.
Following defines sorted set of BTF ID values:
BTF_SET_START(btf_allowlist_d_path)
BTF_ID(func, vfs_truncate)
BTF_ID(func, vfs_fallocate)
BTF_ID(func, dentry_open)
BTF_ID(func, vfs_getattr)
BTF_ID(func, filp_close)
BTF_SET_END(btf_allowlist_d_path)
It defines following 'struct btf_id_set' variable to access
values and count:
struct btf_id_set btf_allowlist_d_path;
Adding 'allowed' callback to struct bpf_func_proto, to allow
verifier the check on allowed callers.
Adding btf_id_set_contains function, which will be used by
allowed callbacks to verify the caller's BTF ID value is
within allowed set.
Also removing extra '\' in __BTF_ID_LIST macro.
Added BTF_SET_START_GLOBAL macro for global sets.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200825192124.710397-10-jolsa@kernel.org
|
|
Adding btf_struct_ids_match function to check if given address provided
by BTF object + offset is also address of another nested BTF object.
This allows to pass an argument to helper, which is defined via parent
BTF object + offset, like for bpf_d_path (added in following changes):
SEC("fentry/filp_close")
int BPF_PROG(prog_close, struct file *file, void *id)
{
...
ret = bpf_d_path(&file->f_path, ...
The first bpf_d_path argument is hold by verifier as BTF file object
plus offset of f_path member.
The btf_struct_ids_match function will walk the struct file object and
check if there's nested struct path object on the given offset.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200825192124.710397-9-jolsa@kernel.org
|
|
Refactor the functionality in bpf_sk_storage.c so that concept of
storage linked to kernel objects can be extended to other objects like
inode, task_struct etc.
Each new local storage will still be a separate map and provide its own
set of helpers. This allows for future object specific extensions and
still share a lot of the underlying implementation.
This includes the changes suggested by Martin in:
https://lore.kernel.org/bpf/20200725013047.4006241-1-kafai@fb.com/
adding new map operations to support bpf_local_storage maps:
* storages for different kernel objects to optionally have different
memory charging strategy (map_local_storage_charge,
map_local_storage_uncharge)
* Functionality to extract the storage pointer from a pointer to the
owning object (map_owner_storage_ptr)
Co-developed-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200825182919.1118197-4-kpsingh@chromium.org
|
|
Don't go via map->ops to call sock_map_update_elem, since we know
what function to call in bpf_map_update_value. Since we currently
don't allow calling map_update_elem from BPF context, we can remove
ops->map_update_elem and rename the function to sock_map_update_elem_sys.
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200821102948.21918-4-lmb@cloudflare.com
|
|
For bpf_map_elem and bpf_sk_local_storage bpf iterators,
additional map_id should be shown for fdinfo and
userspace query. For example, the following is for
a bpf_map_elem iterator.
$ cat /proc/1753/fdinfo/9
pos: 0
flags: 02000000
mnt_id: 14
link_type: iter
link_id: 34
prog_tag: 104be6d3fe45e6aa
prog_id: 173
target_name: bpf_map_elem
map_id: 127
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200821184419.574240-1-yhs@fb.com
|
|
This patch implemented bpf_link callback functions
show_fdinfo and fill_link_info to support link_query
interface.
The general interface for show_fdinfo and fill_link_info
will print/fill the target_name. Each targets can
register show_fdinfo and fill_link_info callbacks
to print/fill more target specific information.
For example, the below is a fdinfo result for a bpf
task iterator.
$ cat /proc/1749/fdinfo/7
pos: 0
flags: 02000000
mnt_id: 14
link_type: iter
link_id: 11
prog_tag: 990e1f8152f7e54f
prog_id: 59
target_name: task
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200821184418.574122-1-yhs@fb.com
|
|
Refactor the code a bit to extract bpf_link_by_id() helper.
It's similar to existing bpf_prog_by_id().
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200819042759.51280-2-alexei.starovoitov@gmail.com
|
|
Commit a5cbe05a6673 ("bpf: Implement bpf iterator for
map elements") added bpf iterator support for
map elements. The map element bpf iterator requires
info to identify a particular map. In the above
commit, the attr->link_create.target_fd is used
to carry map_fd and an enum bpf_iter_link_info
is added to uapi to specify the target_fd actually
representing a map_fd:
enum bpf_iter_link_info {
BPF_ITER_LI |
