| Age | Commit message (Collapse) | Author |
|---|
|
The Lustre filesystem has been in the kernel tree for over 5 years now.
While it has been an endless source of enjoyment for new kernel
developers learning how to do basic codingstyle cleanups, as well as an
semi-entertaining source of bewilderment from the vfs developers any
time they have looked into the codebase to try to figure out how to port
their latest api changes to this filesystem, it has not really moved
forward into the "this is in shape to get out of staging" despite many
half-completed attempts.
And getting code out of staging is the main goal of that portion of the
kernel tree. Code should not stagnate and it feels like having this
code in staging is only causing the development cycle of the filesystem
to take longer than it should. There is a whole separate out-of-tree
copy of this codebase where the developers work on it, and then random
changes are thrown over the wall at staging at some later point in time.
This dual-tree development model has never worked, and the state of this
codebase is proof of that.
So, let's just delete the whole mess. Now the lustre developers can go
off and work in their out-of-tree codebase and not have to worry about
providing valid changelog entries and breaking their patches up into
logical pieces. They can take the time they have spend doing those
types of housekeeping chores and get the codebase into a much better
shape, and it can be submitted for inclusion into the real part of the
kernel tree when ready.
Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Many lustre modules depend on libcfs having initialized
properly, but do not explicit check that it did.
When lustre is built as discrete modules, this does not
cause a problem because if the libcfs module fails
initialization, the other modules don't even get loaded.
When lustre is compiled into the kernel, all module_init()
routines get run, so they need to check the required initialization
succeeded.
This patch splits out the initialization of libcfs into a new
libcfs_setup(), and has all modules call that.
The misc_register() call is kept separate as it does not allocate any
resources and if it fails, it fails hard - no point in retrying.
Other set-up allocates resources and so is best delayed until they
are needed, and can be worth retrying.
Ideally, the initialization would happen at mount time (or similar)
rather than at load time. Doing this requires each module to
check dependencies when they are activated rather than when
they are loaded. Achieving that is a much larger job that would
have to progress in stages.
For now, this change ensures that if some initialization in libcfs
fails, other modules will fail-safe.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
cfs_duration_sec() simply divides by HZ.
It is mostly used to report durations in debug messages.
Remove and just use X/HZ.
Signed-off-by: NeilBrown <neilb@suse.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This function simply multiplies by HZ and adds jiffies.
This is simple enough to be opencoded, and doing so
makes the code easier to read.
Same for cfs_time_shift_64()
Signed-off-by: NeilBrown <neilb@suse.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
cfs_time_add adds its arguments.
cfs_time_sub subtracts finds the difference.
Discard these and use '+' and '-' directly.
This change highlighted a type error. The structure field
cr_queued_time was used to store jiffies, but was declared
as time_t (meant for seconds). So the time is changed to
"unsigned long".
Signed-off-by: NeilBrown <neilb@suse.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Discard cfs_time_current() and cfs_time_current64()
and use jiffies and get_jiffies_64() like the rest of the kernel.
Signed-off-by: NeilBrown <neilb@suse.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
cfs_time_seconds() converts a number of seconds to the
matching number of jiffies.
The standard way to do this in Linux is "* HZ".
So discard cfs_time_seconds() and use "* HZ" instead.
Reviewed-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: NeilBrown <neilb@suse.com>
Reviewed-by: Patrick Farrell <paf@cray.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
LIBCFS_APT_ALLOC() calls kvmalloc_node() with GFP_NOFS
which is not permitted.
Mostly, a kmalloc_node(GFP_NOFS) is appropriate, though occasionally
the allocation is large and GFP_KERNEL is acceptable, so
kvmalloc_node() can be used.
This patch introduces 4 alternatives to LIBCFS_CPT_ALLOC():
kmalloc_cpt()
kzalloc_cpt()
kvmalloc_cpt()
kvzalloc_cpt().
Each takes a size, gfp flags, and cpt number.
Almost every call to LIBCFS_CPT_ALLOC() passes lnet_cpt_table()
as the table. This patch embeds that choice in the k*alloc_cpt()
macros, and opencode kzalloc_node(..., cfs_cpt_spread_node(..))
in the one case that lnet_cpt_table() isn't used.
When LIBCFS_CPT_ALLOC() is replaced, the matching LIBCFS_FREE()
is also replaced, with with kfree() or kvfree() as appropriate.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The size of the data structure is primarily controlled
by the iovec size, which is limited to 256.
Entries in this vector are 12 bytes, so the whole
will always fit in a page.
So it is safe to use kmalloc (kvmalloc not needed).
So replace LIBCFS_ALLOC with kmalloc.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When an allocation happens from process context rather than
filesystem context, it is best to use GFP_KERNEL rather than
LIBCFS_ALLOC() which always uses GFP_NOFS.
This include initialization during, or prior to, mount,
and code run from separate worker threads.
So for some of these cases, switch to kmalloc, kvmalloc, or
kvmalloc_array() as appropriate.
In some cases we preserve __GFP_ZERO (via kzalloc/kvzalloc), but in
others it is clear that allocated memory is immediately initialized.
In each case, the matching LIBCFS_FREE() is converted to
kfree() or kvfree()
This is just a subset of locations that need changing.
As there are quite a lot, I've broken them up into several
ad-hoc sets to avoid review-fatigue.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
All usages of the form
LIBCFS_ALLOC(variable, sizeof(variable))
or
LIBCFS_ALLOC(variable, sizeof(variable's-type))
are changed to
variable = kzalloc(sizeof(...), GFP_NOFS);
Similarly, all
LIBCFS_FREE(variable, sizeof(variable))
become
kfree(variable);
None of these need the vmalloc option, or any of the other minor
benefits of LIBCFS_ALLOC().
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Commit 8e55b6fd0660 ("staging: lustre: lnet: replace list_for_each
with list_for_each_entry") was intended to be an idempotent change,
but actually broke the behavior of ksocknal_add_peer() causing mounts to fail.
The fact that it caused an existing "route2 = NULL;" to become
redundant could have been a clue. The fact that the loop body
set the new loop variable to NULL might also have been a clue
The original code relied on "route2" being NULL if nothing was found.
The new code would always set route2 to a non-NULL value if the list
was empty, and would likely crash if the list was not empty.
Restore correct functionality by using code-flow rather the value of
"route2" to determine whether to use on old route, or to add a new one.
Fixes: 8e55b6fd0660 ("staging: lustre: lnet: replace list_for_each with list_for_each_entry")
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull iov_iter updates from Al Viro:
- bio_{map,copy}_user_iov() series; those are cleanups - fixes from the
same pile went into mainline (and stable) in late September.
- fs/iomap.c iov_iter-related fixes
- new primitive - iov_iter_for_each_range(), which applies a function
to kernel-mapped segments of an iov_iter.
Usable for kvec and bvec ones, the latter does kmap()/kunmap() around
the callback. _Not_ usable for iovec- or pipe-backed iov_iter; the
latter is not hard to fix if the need ever appears, the former is by
design.
Another related primitive will have to wait for the next cycle - it
passes page + offset + size instead of pointer + size, and that one
will be usable for everything _except_ kvec. Unfortunately, that one
didn't get exposure in -next yet, so...
- a bit more lustre iov_iter work, including a use case for
iov_iter_for_each_range() (checksum calculation)
- vhost/scsi leak fix in failure exit
- misc cleanups and detritectomy...
* 'work.iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (21 commits)
iomap_dio_actor(): fix iov_iter bugs
switch ksocknal_lib_recv_...() to use of iov_iter_for_each_range()
lustre: switch struct ksock_conn to iov_iter
vhost/scsi: switch to iov_iter_get_pages()
fix a page leak in vhost_scsi_iov_to_sgl() error recovery
new primitive: iov_iter_for_each_range()
lnet_return_rx_credits_locked: don't abuse list_entry
xen: don't open-code iov_iter_kvec()
orangefs: remove detritus from struct orangefs_kiocb_s
kill iov_shorten()
bio_alloc_map_data(): do bmd->iter setup right there
bio_copy_user_iov(): saner bio size calculation
bio_map_user_iov(): get rid of copying iov_iter
bio_copy_from_iter(): get rid of copying iov_iter
move more stuff down into bio_copy_user_iov()
blk_rq_map_user_iov(): move iov_iter_advance() down
bio_map_user_iov(): get rid of the iov_for_each()
bio_map_user_iov(): move alignment check into the main loop
don't rely upon subsequent bio_add_pc_page() calls failing
... and with iov_iter_get_pages_alloc() it becomes even simpler
...
|
|
It's good to have SPDX identifiers in all files to make it easier to
audit the kernel tree for correct licenses.
Update the drivers/staging/lustre files files with the correct SPDX
license identifier based on the license text in the file itself. The
SPDX identifier is a legally binding shorthand, which can be used
instead of the full boiler plate text.
This work is based on a script and data from Thomas Gleixner, Philippe
Ombredanne, and Kate Stewart.
Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: James Simmons <jsimmons@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Merge ksnc_rx_{no_wanted,iov,kiov,niov,nkiov} into a single iov_iter
(ksnc_rx_to).
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Replace use of the combination of list_for_each() and list_entry() with
list_for_each_entry() to simplify the code and remove variables that are
used only in list_for_each().
Issue found and corrected using Coccinelle script:
@r@
expression head, member, e;
type T1, T2, T3;
iterator name list_for_each, list_for_each_entry;
identifier pos, var;
@@
-T1 *pos;
...when!=pos
-list_for_each(pos, head)
+list_for_each_entry(var, head, member)
{
...when!=pos
when!=T3 *var;
-var = list_entry(pos, T2, member);
...when!=pos
}
...when!=pos
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Change lnet_process_id_t from typedef to proper structure.
Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-on: https://review.whamcloud.com/20831
Reviewed-by: Olaf Weber <olaf@sgi.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Change lnet_ni_t from typedef to proper structure.
Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-on: https://review.whamcloud.com/20831
Reviewed-by: Olaf Weber <olaf@sgi.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Change lnd_t from typedef to proper structure.
Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-on: https://review.whamcloud.com/20831
Reviewed-by: Olaf Weber <olaf@sgi.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The upstream kernel requires proper structures so
convert all the UAPI typedefs in socklnd.h.
Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: https://review.whamcloud.com/18506
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Replace the ulong_ptr_t and long_ptr_t with standard
kernel types.
Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6245
Reviewed-on: http://review.whamcloud.com/20204
Reviewed-by: Frank Zago <fzago@cray.com>
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
lustre uses a fake switch() statement as a compile-time assert, but unfortunately
each use of that causes a warning when building with clang:
drivers/staging/lustre/lnet/klnds/socklnd/socklnd.c:2907:2: warning: no case matching constant switch condition '42'
drivers/staging/lustre/lnet/klnds/socklnd/../../../include/linux/libcfs/libcfs_private.h:294:36: note: expanded from macro 'CLASSERT'
#define CLASSERT(cond) do {switch (42) {case (cond): case 0: break; } } while (0)
As Greg suggested, let's just kill off this macro completely instead of
fixing it. This replaces it with BUILD_BUG_ON(), which means we have
to negate all the conditions in the process.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Replace a mix of tabs and spaces indentation by tabs only.
Errors were reported by checkpatch.pl as
WARNING: Statements should start on a tabstop
WARNING: suspect code indent for conditional statement
Signed-off-by: Maxime Rossi Bellom <mrossibellom@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Cleanup some of the checkpatch over 80 character lines
reported.
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
These #if 0 blocks have been in place for years. Assume
they are not used and remove them
Signed-off-by: Ben Evans <bevans@cray.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8058
Reviewed-on: http://review.whamcloud.com/20414
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch fixes all checkpatch occurences of
"CHECK: No space is necessary after a cast"
in Lustre code.
Signed-off-by: Emoly Liu <emoly.liu@intel.com>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
http://www.sun.com/software/products/lustre/docs/GPLv2.pdf is no
longer around, so replae it with (hopefully more permanent)
http://http://www.gnu.org/licenses/gpl-2.0.html
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Reported-by: Xose Vazquez Perez <xose.vazquez@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since SUN is no longer around and there's no point in contacting them,
just remove that whole thing. Copy of GPL is available online anyway
(URLs to be updated in next patch).
This patch was generated with:
find drivers/staging/lustre -name "*.[ch]" -exec perl -0777 -i -pe 's/ \* Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa Clara,\n \* CA 95054 USA or visit www.sun.com if you need additional information or\n \* have any questions.\n \*\n//igs' {} \;
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Reported-by: Xose Vazquez Perez <xose.vazquez@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove all remaining typedefs in socklnd driver.
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove return statement from void function.
Signed-off-by: Sandhya Bankar <bankarsandhya512@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Doubly linked lists which are iterated using list_empty
and list_entry macros have been replaced with list_for_each_entry_safe
macro.
This makes the iteration simpler and more readable.
This patch replaces the while loop containing list_empty and list_entry
with list_for_each_entry_safe.
This was done with Coccinelle.
@@
expression E1;
identifier I1, I2;
type T;
iterator name list_for_each_entry_safe;
@@
T *I1;
+ T *tmp;
...
- while (list_empty(&E1) == 0)
+ list_for_each_entry_safe (I1, tmp, &E1, I2)
{
...when != T *I1;
- I1 = list_entry(E1.next, T, I2);
...
}
Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Null pointer 'best_iface' that comes from line 802 may be
dereferenced at line 832.
Signed-off-by: Dmitry Eremin <dmitry.eremin@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4629
Reviewed-on: http://review.whamcloud.com/9386
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Isaac Huang <he.huang@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently the socklnd driver doesn't support
CPT affinity for its peers. Binding peers to
a specific CPT and memory allocated to the
NUMA node belonging to the CPT should give a
performance boost.
Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7245
Reviewed-on: http://review.whamcloud.com/16710
Reviewed-by: Olaf Weber <olaf@sgi.com>
Reviewed-by: Amir Shehata <amir.shehata@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Make the name of the module_init()/_exit() functions consistently
{module_name}_init and {module_name}_exit.
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6204
Reviewed-on: http://review.whamcloud.com/16787
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: Frank Zago <fzago@cray.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fixup the MODULE_DESCRIPTION for several lustre modules. Some wrongly
place the version in the string or they are not descriptive enough.
Broken out of patch http://review.whamcloud.com/16787.
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6204
Reviewed-on: http://review.whamcloud.com/16787
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: Frank Zago <fzago@cray.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
For several lustre modules the MODULE_VERSION has the wrong value,
located in the wrong place in the source code, or completely missing.
This patch brings it up to date.
Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6204
Reviewed-on: http://review.whamcloud.com/16729
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Frank Zago <fzago@cray.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove LUSTRE_LNET_PID (12354) and LUSTRE_SRV_LNET_PID (12345) from
the libcfs headers and replace their uses with a new macro
LNET_PID_LUSTRE (also 12345) in lnet/types.h.
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2675
Reviewed-on: http://review.whamcloud.com/11985
Reviewed-by: James Simmons <uja.ornl@gmail.com>
Reviewed-by: Bob Glossman <bob.glossman@intel.com>
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Doing if (rc != 0) or if (rc == 0) is bad form. This patch corrects
the LNet code to behavior according to kernel coding standards.
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This removes every instance of checking a variable against
NULL in the LNet source code.
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Cleanup all occurances of more than one variable being set per line as
reported by checkpatch.pl.
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add missing spaces in the code reported by checkpatch.pl.
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove any useless blank lines reported by checkpatch.pl
for LNet layer.
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In several places in the LNet core the code doesn't align
up properly. This resolves those checkpath issues.
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In several places in the LNet core comment blocks don't follow the
linux kernel style. This patch cleans those problems up.
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Update copyright messages in files modified by Intel employees
in 2015 by non-trivial patches. Exclude patches that are only
deleting code, renaming functions, or adding or removing whitespace.
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7243
Reviewed-on: http://review.whamcloud.com/16758
Reviewed-by: James Nunez <james.a.nunez@intel.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The modinfo data has gone stale for the author information.
This patch changes all the MODULE_AUTHOR to OpenSFS.
Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6204
Reviewed-on: http://review.whamcloud.com/16132
Reviewed-by: Frank Zago <fzago@cray.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Buffer overflow of string buffer due to non null terminated string.
Use strlcpy() when it's justifiable.
Use sizeof(var) instead of constants.
Signed-off-by: Dmitry Eremin <dmitry.eremin@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4629
Reviewed-on: http://review.whamcloud.com/9389
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Braces not needed for single statement block
Signed-off-by: Nilesh Kokane <Nilesh.Kokane05@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Return function in void function is not needed.
Signed-off-by: Nilesh Kokane <Nilesh.Kokane05@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
