summaryrefslogtreecommitdiffstats
path: root/drivers/net
AgeCommit message (Collapse)Author
2006-06-20[FORCEDETH] Fix xmit_lock/netif_tx_lock after mergeHerbert Xu
There has been an update to the forcedeth driver that added a few new uses of xmit_lock which is no longer meant to be used directly. This patch replaces them with netif_tx_lock_bh. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-20Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: Update defconfig. [SPARC64]: Don't double-export synchronize_irq. [SPARC64]: Move over to GENERIC_HARDIRQS. [SPARC64]: Virtualize IRQ numbers. [SPARC64]: Kill ino_bucket->pil [SPARC]: Kill __irq_itoa(). [SPARC64]: bp->pil can never be zero [SPARC64]: Send all device interrupts via one PIL. [SPARC]: Fix iommu_flush_iotlb end address [SPARC]: Mark smp init functions as cpuinit [SPARC]: Add missing rw can_lock macros [SPARC]: Setup cpu_possible_map [SPARC]: Add topology_init()
2006-06-20Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: (22 commits) [ARM] 3559/1: S3C2442: core and serial port [ARM] 3557/1: S3C24XX: centralise and cleanup uart registration [ARM] 3558/1: SMDK24XX: LED platform devices [ARM] 3534/1: add spi support to lubbock platform [ARM] 3554/1: ARM: Fix dyntick locking [ARM] 3553/1: S3C24XX: earlier print of cpu idcode info [ARM] 3552/1: S3C24XX: Move VA of GPIO for low-level debug [ARM] 3551/1: S3C24XX: PM code failes to compile with CONFIG_DCACHE_WRITETHROUGH [ARM] 3550/1: OSIRIS: fix serial port map for 1:1 [ARM] 3548/1: Fix the ARMv6 CPU id in compressed/head.S [ARM] 3335/1: Old-abi Thumb sys_syscall broken [ARM] 3467/1: [3/3] Support for Philips PNX4008 platform: defconfig [ARM] 3466/1: [2/3] Support for Philips PNX4008 platform: chip support [ARM] 3465/1: [1/3] Support for Philips PNX4008 platform: headers [ARM] 3407/1: lpd7x: documetation update [ARM] 3406/1: lpd7x: compilation fix for smc91x [ARM] 3405/1: lpd7a40x: CPLD ssp driver [ARM] 3404/1: lpd7a40x: AMBA CLCD support [ARM] 3403/1: lpd7a40x: updated default configurations [ARM] 3402/1: lpd7a40x: serial driver bug fix ...
2006-06-20[SPARC]: Kill __irq_itoa().David S. Miller
This ugly hack was long overdue to die. It was a way to print out Sparc interrupts in a more freindly format, since IRQ numbers were arbitrary opaque 32-bit integers which vectored into PIL levels. These 32-bit integers were not necessarily in the 0-->NR_IRQS range, but the PILs they vectored to were. The idea now is that we will increase NR_IRQS a little bit and use a virtual<-->real IRQ number mapping scheme similar to PowerPC. That makes this IRQ printing hack irrelevant, and furthermore only a handful of drivers actually used __irq_itoa() making it even less useful. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-19Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (51 commits) [MIPS] Make timer interrupt frequency configurable from kconfig. [MIPS] Correct HAL2 Kconfig description [MIPS] Fix R4K cache macro names [MIPS] Add Missing R4K Cache Macros to IP27 & IP32 [MIPS] Support for the RM9000-based Basler eXcite smart camera platform. [MIPS] Support for the R5500-based NEC EMMA2RH Mark-eins board [MIPS] Support SNI RM200C SNI in big endian mode and R5000 processors. [MIPS] SN: include asm/sn/types.h for nasid_t. [MIPS] Random fixes for sb1250 [MIPS] Fix bcm1480 compile [MIPS] Remove support for NEC DDB5476. [MIPS] Remove support for NEC DDB5074. [MIPS] Cleanup memory managment initialization. [MIPS] SN: Declare bridge_pci_ops. [MIPS] Remove unused function alloc_pci_controller. [MIPS] IP27: Extract pci_ops into separate file. [MIPS] IP27: Use symbolic constants instead of magic numbers. [MIPS] vr41xx: remove unnecessay items from vr41xx/Kconfig. [MIPS] IP27: Cleanup N/M mode configuration. [MIPS] IP27: Throw away old unused hacks. ...
2006-06-19Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (109 commits) [ETHTOOL]: Fix UFO typo [SCTP]: Fix persistent slowdown in sctp when a gap ack consumes rx buffer. [SCTP]: Send only 1 window update SACK per message. [SCTP]: Don't do CRC32C checksum over loopback. [SCTP] Reset rtt_in_progress for the chunk when processing its sack. [SCTP]: Reject sctp packets with broadcast addresses. [SCTP]: Limit association max_retrans setting in setsockopt. [PFKEYV2]: Fix inconsistent typing in struct sadb_x_kmprivate. [IPV6]: Sum real space for RTAs. [IRDA]: Use put_unaligned() in irlmp_do_discovery(). [BRIDGE]: Add support for NETIF_F_HW_CSUM devices [NET]: Add NETIF_F_GEN_CSUM and NETIF_F_ALL_CSUM [TG3]: Convert to non-LLTX [TG3]: Remove unnecessary tx_lock [TCP]: Add tcp_slow_start_after_idle sysctl. [BNX2]: Update version and reldate [BNX2]: Use CPU native page size [BNX2]: Use compressed firmware [BNX2]: Add firmware decompression [BNX2]: Allow WoL settings on new 5708 chips ... Manual fixup for conflict in drivers/net/tulip/winbond-840.c
2006-06-19[MIPS] Remove support for NEC DDB5476.Ralf Baechle
As warned several times before. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-18[ARM] 3406/1: lpd7x: compilation fix for smc91xMarc Singer
Patch from Marc Singer Reworking of the adaptation macros to allow driver to compile again for the lpd7x's. Also, support added for the lh79520 so it may use the smc91x. Signed-off-by: Marc Singer <elf@buici.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-18Merge branch 'master' into upstreamJeff Garzik
2006-06-17[NET]: Add NETIF_F_GEN_CSUM and NETIF_F_ALL_CSUMHerbert Xu
The current stack treats NETIF_F_HW_CSUM and NETIF_F_NO_CSUM identically so we test for them in quite a few places. For the sake of brevity, I'm adding the macro NETIF_F_GEN_CSUM for these two. We also test the disjunct of NETIF_F_IP_CSUM and the other two in various places, for that purpose I've added NETIF_F_ALL_CSUM. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-17[TG3]: Convert to non-LLTXMichael Chan
Herbert Xu pointed out that it is unsafe to call netif_tx_disable() from LLTX drivers because it uses dev->xmit_lock to synchronize whereas LLTX drivers use private locks. Convert tg3 to non-LLTX to fix this issue. tg3 is a lockless driver where hard_start_xmit and tx completion handling can run concurrently under normal conditions. A tx_lock is only needed to prevent netif_stop_queue and netif_wake_queue race condtions when the queue is full. So whether we use LLTX or non-LLTX, it makes practically no difference. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-17[TG3]: Remove unnecessary tx_lockMichael Chan
Remove tx_lock where it is unnecessary. tg3 runs lockless and so it requires interrupts to be disabled and sync'ed, netif_queue and NAPI poll to be stopped before the device can be reconfigured. After stopping everything, it is no longer necessary to get the tx_lock. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-17[BNX2]: Update version and reldateMichael Chan
Update driver version to 1.4.42. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-17[BNX2]: Use CPU native page sizeMichael Chan
Use CPU native page size to determine various ring sizes. This allows order-0 memory allocations on all systems. Added check to limit the page size to 16K since that's the maximum rx ring size that will be used. This will prevent using unnecessarily large page sizes on some architectures with large page sizes. [Suggested by David Miller] Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-17[BNX2]: Use compressed firmwareMichael Chan
Change bnx2_fw.h to use compressed text for all CPU images. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-17[BNX2]: Add firmware decompressionMichael Chan
Add functions to decompress firmware before loading to the internal CPUs. Compressing the firmware reduces the driver size significantly. Added file name length sanity check in the gzip header to prevent going past the end of buffer [suggested by DaveM]. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-17[BNX2]: Allow WoL settings on new 5708 chipsMichael Chan
Allow WOL settings on 5708 B2 and newer chips that have the problem fixed. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-17[BNX2]: Add an rx drop counterMichael Chan
Add a counter for packets dropped by firmware. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-17[BNX2]: Endian fixes.Alexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-17[IRDA]: irda-usb.c: STIR421x cleanupsNick Fedchik
This cleans the STIR421x part of the irda-usb code. We also no longer try to load all existing firmwares but only the matching one (according to the USB id we get from the dongle). Signed-off-by: Nick Fedchik <nfedchik@atlantic-link.com.ua> Signed-off-by: Samuel Ortiz <samuel@sortiz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-17[NET] ppp: Remove unnecessary pskb_may_pullHerbert Xu
In ppp_receive_nonmp_frame, we call pskb_may_pull(skb, skb->len) if the tailroom is >= 124. This is pointless because this pskb_may_pull is only needed if the skb is non-linear. However, if it is non-linear then the tailroom would be zero. So it can be safely removed. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-17[NET]: Clean up skb_linearizeHerbert Xu
The linearisation operation doesn't need to be super-optimised. So we can replace __skb_linearize with __pskb_pull_tail which does the same thing but is more general. Also, most users of skb_linearize end up testing whether the skb is linear or not so it helps to make skb_linearize do just that. Some callers of skb_linearize also use it to copy cloned data, so it's useful to have a new function skb_linearize_cow to copy the data if it's either non-linear or cloned. Last but not least, I've removed the gfp argument since nobody uses it anymore. If it's ever needed we can easily add it back. Misc bugs fixed by this patch: * via-velocity error handling (also, no SG => no frags) Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-17[NET]: Add netif_tx_lockHerbert Xu
Various drivers use xmit_lock internally to synchronise with their transmission routines. They do so without setting xmit_lock_owner. This is fine as long as netpoll is not in use. With netpoll it is possible for deadlocks to occur if xmit_lock_owner isn't set. This is because if a printk occurs while xmit_lock is held and xmit_lock_owner is not set can cause netpoll to attempt to take xmit_lock recursively. While it is possible to resolve this by getting netpoll to use trylock, it is suboptimal because netpoll's sole objective is to maximise the chance of getting the printk out on the wire. So delaying or dropping the message is to be avoided as much as possible. So the only alternative is to always set xmit_lock_owner. The following patch does this by introducing the netif_tx_lock family of functions that take care of setting/unsetting xmit_lock_owner. I renamed xmit_lock to _xmit_lock to indicate that it should not be used directly. I didn't provide irq versions of the netif_tx_lock functions since xmit_lock is meant to be a BH-disabling lock. This is pretty much a straight text substitution except for a small bug fix in winbond. It currently uses netif_stop_queue/spin_unlock_wait to stop transmission. This is unsafe as an IRQ can potentially wake up the queue. So it is safer to use netif_tx_disable. The hamradio bits used spin_lock_irq but it is unnecessary as xmit_lock must never be taken in an IRQ handler. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-17[TG3]: update version and reldateMichael Chan
Update version to 3.60. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-17[TG3]: Add recovery logic when MMIOs are re-orderedMichael Chan
Add recovery logic when we suspect that the system is re-ordering MMIOs. Re-ordered MMIOs to the send mailbox can cause bogus tx completions and hit BUG_ON() in the tx completion path. tg3 already has logic to handle re-ordered MMIOs by flushing the MMIOs that must be strictly ordered (such as the send mailbox). Determining when to enable the flush is currently a manual process of adding known chipsets to a list. The new code replaces the BUG_ON() in the tx completion path with the call to tg3_tx_recover(). It will set the TG3_FLAG_MBOX_WRITE_REORDER flag and reset the chip later in the workqueue to recover and start flushing MMIOs to the mailbox. A message to report the problem will be printed. We will then decide whether or not to add the host bridge to the list of chipsets that do re-ordering. We may add some additional code later to print the host bridge's ID so that the user can report it more easily. The assumption that re-ordering can only happen on x86 systems is also removed. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-17[TG3]: Add 5786 PCI IDMichael Chan
Add PCI ID for BCM5786 which is a variant of 5787. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-17[IRDA]: ali-ircc: using device model power managementSamuel Ortiz
This patch gets rid of the old power management code and now uses the device model for the ali-ircc driver. Signed-off-by: Samuel Ortiz <samuel@sortiz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-17[IRDA]: stir4200, switching to the kthread APIChristoph Hellwig
stir4200 uses a kernel thread for its TX/RX operations, and it is now converted to the kernel kthread API. Tested on an STIR4200 based dongle. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Samuel Ortiz <samuel@sortiz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-17[IRDA]: Initial support for MCS7780 based donglesSamuel Ortiz
The MosChip MCS7780 chipset is an IrDA USB bridge that doesn't conform with the IrDA-USB standard and thus needs its separate driver. Tested on an actual MCS7780 based dongle. Original implementation by Brian Pugh <bpugh@cs.pdx.edu> Signed-off-by: Samuel Ortiz <samuel@sortiz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-17[PATCH] sky2: netconsole suspend/resume interactionStephen Hemminger
A couple of fixes that should prevent crashes when using netconsole and suspend/resume. First, netconsole poll routine shouldn't run unless the device is up; second, the NAPI poll should be disabled during suspend. This is only an issue on sky2, because it has to have one NAPI poll routine for both ports on dual port boards. Normal drivers use netif_rx_schedule_prep and that checks for netif_running. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-13Merge branch 'master' into upstreamJeff Garzik
2006-06-13[PATCH] sky2: stop/start hardware idle timer on suspend/resumeStephen Hemminger
The resume bug was caused not by an early interrupt but because the idle timeout was not being stopped on suspend. Also disable hardware IRQ's on suspend. Will need to revisit this with hotplug? Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-13[PATCH] sky2: save/restore base hardware irq during suspend/resumeStephen Hemminger
The hardware should be fully shut off during suspend, and the base irq mask restored during resume. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-13[PATCH] sky2: fix hotplug detect during pollStephen Hemminger
If the poll routine detects no hardware available, it needs to dequeue it self from the network poll list. Linus didn't understand NAPI. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-13[PATCH] sky2: don't hard code number of portsStephen Hemminger
It is cleaner, to not loop over both ports if only one exists. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-13[PATCH] sky2: set_power_state should be voidStephen Hemminger
The set power state function is cleaner if it doesn't return anything. The only caller that could fail is in suspend() and it can check the argument there. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-12[sky2] Fix sky2 network driver suspend/resumeLinus Torvalds
This fixes two independent problems: it would not save the PCI state on suspend (and thus try to resume a nonexistent state on resume), and while shut off, if an interrupt happened on the same shared irq, the irq handler would react very badly to the interrupt status being an invalid all-ones state. Acked-by: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-11[PATCH] net: au1000_eth: PHY framework conversionHerbert Valerio Riedel
convert au1000_eth driver to use PHY framework and garbage collected functions and identifiers that became unused/obsolete in the process Signed-off-by: Herbert Valerio Riedel <hvr@gnu.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-11[PATCH] 3c5zz ethernet: fix section warningsRandy Dunlap
Priority: not critical; makes init code discardable. Fix section mismatch warnings: WARNING: drivers/net/3c501.o - Section mismatch: reference to .init.text:el1_probe from .text between 'init_module' (at offset 0x812) and 'cleanup_module' WARNING: drivers/net/3c503.o - Section mismatch: reference to .init.text: from .text between 'init_module' (at offset 0x661) and 'cleanup_card' WARNING: drivers/net/3c505.o - Section mismatch: reference to .init.text: from .text between 'init_module' (at offset 0x228d) and 'cleanup_module' WARNING: drivers/net/3c507.o - Section mismatch: reference to .init.text:el16_probe from .text between 'init_module' (at offset 0xa99) and 'cleanup_module' WARNING: drivers/net/3c523.o - Section mismatch: reference to .init.text: from .text between 'init_module' (at offset 0x12e7) and 'cleanup_module' WARNING: drivers/net/3c527.o - Section mismatch: reference to .init.text:mc32_probe from .text between 'init_module' (at offset 0xd8d) and 'cleanup_module' Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-11[PATCH] smc ethernet: fix section mismatch warningsRandy Dunlap
Priority: not critical; makes init code discardable. Removes one duplicate assignment. Fix section mismatch warnings: WARNING: drivers/net/smc-ultra.o - Section mismatch: reference to .init.text: from .text between 'init_module' (at offset 0x369) and 'cleanup_card' WARNING: drivers/net/smc-ultra32.o - Section mismatch: reference to .init.text:ultra32_probe from .text between 'init_module' (at offset 0x254) and 'cleanup_module' WARNING: drivers/net/smc9194.o - Section mismatch: reference to .init.text:smc_init from .text between 'init_module' (at offset 0x997) and 'cleanup_module' WARNING: drivers/net/smc9194.o - Section mismatch: reference to .init.data: from .data between 'smcdev.0' (at offset 0x44) and '__param_str_io' Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-11[PATCH] hp ethernet: fix section mismatchesRandy Dunlap
Priority: not critical; makes init code discardable. Fix section mismatch warnings: WARNING: drivers/net/hp-plus.o - Section mismatch: reference to .init.text: from .text between 'init_module' (at offset 0x387) and 'cleanup_card' WARNING: drivers/net/hp.o - Section mismatch: reference to .init.data: from .text between 'hp_init_card' (at offset 0x310) and 'init_module' WARNING: drivers/net/hp.o - Section mismatch: reference to .init.text: from .text between 'init_module' (at offset 0x367) and 'cleanup_card' Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-11[PATCH] Section mismatch in drivers/net/ne.o during modpostRandy.Dunlap
On Sat, 10 Jun 2006 14:11:42 +0200 (MEST) Mikael Pettersson wrote: > While compiling 2.6.17-rc6 for a 486 with an NE2000 ISA ethernet card, I got: > > WARNING: drivers/net/ne.o - Section mismatch: reference to .init.data:isapnp_clone_list from .text between 'init_module' (at offset 0x158) and 'ne_block_input' > WARNING: drivers/net/ne.o - Section mismatch: reference to .init.data:isapnp_clone_list from .text between 'init_module' (at offset 0x176) and 'ne_block_input' > WARNING: drivers/net/ne.o - Section mismatch: reference to .init.data:isapnp_clone_list from .text between 'init_module' (at offset 0x183) and 'ne_block_input' > WARNING: drivers/net/ne.o - Section mismatch: reference to .init.data:isapnp_clone_list from .text between 'init_module' (at offset 0x1ea) and 'ne_block_input' > WARNING: drivers/net/ne.o - Section mismatch: reference to .init.data:isapnp_clone_list from .text between 'init_module' (at offset 0x251) and 'ne_block_input' > WARNING: drivers/net/ne.o - Section mismatch: reference to .init.text: from .text between 'init_module' (at offset 0x266) and 'ne_block_input' > WARNING: drivers/net/ne.o - Section mismatch: reference to .init.text: from .text between 'init_module' (at offset 0x29b) and 'ne_block_input' > > Not sure how serious this is; the driver seems to work fine later on. Doesn't look serious. init_module() is not __init, but it calls some __init functions and touches some __initdata. BTW, I would be happy to see some consistent results from modpost section checking. I don't see all of these warnings (I see only 1) when using gcc 3.3.6. What gcc version are you using? Does that matter? (not directed at anyone in particular) Patch below fixes it for me. Please test/report. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-11[PATCH] e1000: prevent statistics from getting garbled during resetLinas Vepstas
If a PCI bus error/fault triggers a PCI bus reset, attempts to get the ethernet packet count statistics from the hardware will fail, returning garbage data upstream. This patch skips statistics data collection if the PCI device is not on the bus. This patch presumes that an earlier patch, [PATCH] PCI Error Recovery: e1000 network device driver has already been applied. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Cc: John Ronciak <john.ronciak@intel.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-11[PATCH] smc911x Kconfig fixAndrew Morton
In file included from drivers/net/smc911x.c:84: drivers/net/smc911x.h:46:9: warning: "SMC_USE_16BIT" is not defined drivers/net/smc911x.h:60:9: warning: "SMC_USE_32BIT" is not defined drivers/net/smc911x.h:73:10: warning: "SMC_USE_PXA_DMA" is not defined drivers/net/smc911x.c: In function `smc911x_reset': drivers/net/smc911x.c:247: warning: implicit declaration of function `SMC_inl' drivers/net/smc911x.c:249: warning: implicit declaration of function `SMC_outl' Cc: Dustin McIntire <dustin@sensoria.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-11[PATCH] forcedeth: new device idsAyaz Abdulla
This patch contains new device ids for forcedeth ethernet. Signed-Off-By: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-11[PATCH] forcedeth config: versionAyaz Abdulla
This patch bumps up the version number for config support. Signed-Off-By: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-11[PATCH] forcedeth config: module parametersAyaz Abdulla
This patch adds (and modifies) module parameter support. Signed-Off-By: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-11[PATCH] forcedeth config: diagnosticsAyaz Abdulla
This patch adds support for diagnostic tests through ethtool support. Signed-Off-By: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-11[PATCH] forcedeth config: move functionsAyaz Abdulla
This patch moves a few functions (no logic change) so that the next patch has these functions defined. Signed-Off-By: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-11[PATCH] forcedeth config: statisticsAyaz Abdulla
This patch exposes hardware statistic counters through ethtool support. Signed-Off-By: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>