diff options
author | Herbert Valerio Riedel <hvr@gnu.org> | 2006-06-01 09:41:04 +0200 |
---|---|---|
committer | Jeff Garzik <jeff@garzik.org> | 2006-06-11 23:19:00 -0400 |
commit | 0638dec01e89059c853515ab71c55fd13ba5a8ea (patch) | |
tree | 7743a5714b03ef408b3147475cfe61127d580ed3 /drivers/net | |
parent | 96e672c79fb114ec38a868dc864e743205c24332 (diff) |
[PATCH] net: au1000_eth: PHY framework conversion
convert au1000_eth driver to use PHY framework and garbage collected
functions and identifiers that became unused/obsolete in the process
Signed-off-by: Herbert Valerio Riedel <hvr@gnu.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Diffstat (limited to 'drivers/net')
-rw-r--r-- | drivers/net/Kconfig | 1 | ||||
-rw-r--r-- | drivers/net/au1000_eth.c | 1602 | ||||
-rw-r--r-- | drivers/net/au1000_eth.h | 134 |
3 files changed, 378 insertions, 1359 deletions
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 2f0b2549e9ec..20bdb9732a09 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -447,6 +447,7 @@ config MIPS_GT96100ETH config MIPS_AU1X00_ENET bool "MIPS AU1000 Ethernet support" depends on NET_ETHERNET && SOC_AU1X00 + select PHYLIB select CRC32 help If you have an Alchemy Semi AU1X00 based system diff --git a/drivers/net/au1000_eth.c b/drivers/net/au1000_eth.c index e1fe960d71b3..038d5fcb15e6 100644 --- a/drivers/net/au1000_eth.c +++ b/drivers/net/au1000_eth.c @@ -9,6 +9,9 @@ * Update: 2004 Bjoern Riemer, riemer@fokus.fraunhofer.de * or riemer@riemer-nt.de: fixed the link beat detection with * ioctls (SIOCGMIIPHY) + * Copyright 2006 Herbert Valerio Riedel <hvr@gnu.org> + * converted to use linux-2.6.x's PHY framework + * * Author: MontaVista Software, Inc. * ppopov@mvista.com or source@mvista.com * @@ -53,6 +56,7 @@ #include <linux/skbuff.h> #include <linux/delay.h> #include <linux/crc32.h> +#include <linux/phy.h> #include <asm/mipsregs.h> #include <asm/irq.h> #include <asm/io.h> @@ -88,17 +92,15 @@ static int au1000_tx(struct sk_buff *, struct net_device *); static int au1000_rx(struct net_device *); static irqreturn_t au1000_interrupt(int, void *, struct pt_regs *); static void au1000_tx_timeout(struct net_device *); -static int au1000_set_config(struct net_device *dev, struct ifmap *map); static void set_rx_mode(struct net_device *); static struct net_device_stats *au1000_get_stats(struct net_device *); -static void au1000_timer(unsigned long); static int au1000_ioctl(struct net_device *, struct ifreq *, int); static int mdio_read(struct net_device *, int, int); static void mdio_write(struct net_device *, int, int, u16); -static void dump_mii(struct net_device *dev, int phy_id); +static void au1000_adjust_link(struct net_device *); +static void enable_mac(struct net_device *, int); // externs -extern void ack_rise_edge_irq(unsigned int); extern int get_ethernet_addr(char *ethernet_addr); extern void str2eaddr(unsigned char *ea, unsigned char *str); extern char * __init prom_getcmdline(void); @@ -126,705 +128,83 @@ static unsigned char au1000_mac_addr[6] __devinitdata = { 0x00, 0x50, 0xc2, 0x0c, 0x30, 0x00 }; -#define nibswap(x) ((((x) >> 4) & 0x0f) | (((x) << 4) & 0xf0)) -#define RUN_AT(x) (jiffies + (x)) - -// For reading/writing 32-bit words from/to DMA memory -#define cpu_to_dma32 cpu_to_be32 -#define dma32_to_cpu be32_to_cpu - struct au1000_private *au_macs[NUM_ETH_INTERFACES]; -/* FIXME - * All of the PHY code really should be detached from the MAC - * code. +/* + * board-specific configurations + * + * PHY detection algorithm + * + * If AU1XXX_PHY_STATIC_CONFIG is undefined, the PHY setup is + * autodetected: + * + * mii_probe() first searches the current MAC's MII bus for a PHY, + * selecting the first (or last, if AU1XXX_PHY_SEARCH_HIGHEST_ADDR is + * defined) PHY address not already claimed by another netdev. + * + * If nothing was found that way when searching for the 2nd ethernet + * controller's PHY and AU1XXX_PHY1_SEARCH_ON_MAC0 is defined, then + * the first MII bus is searched as well for an unclaimed PHY; this is + * needed in case of a dual-PHY accessible only through the MAC0's MII + * bus. + * + * Finally, if no PHY is found, then the corresponding ethernet + * controller is not registered to the network subsystem. */ -/* Default advertise */ -#define GENMII_DEFAULT_ADVERTISE \ - ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full | \ - ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full | \ - ADVERTISED_Autoneg - -#define GENMII_DEFAULT_FEATURES \ - SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full | \ - SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full | \ - SUPPORTED_Autoneg - -int bcm_5201_init(struct net_device *dev, int phy_addr) -{ - s16 data; - - /* Stop auto-negotiation */ - data = mdio_read(dev, phy_addr, MII_CONTROL); - mdio_write(dev, phy_addr, MII_CONTROL, data & ~MII_CNTL_AUTO); - - /* Set advertisement to 10/100 and Half/Full duplex - * (full capabilities) */ - data = mdio_read(dev, phy_addr, MII_ANADV); - data |= MII_NWAY_TX | MII_NWAY_TX_FDX | MII_NWAY_T_FDX | MII_NWAY_T; - mdio_write(dev, phy_addr, MII_ANADV, data); - - /* Restart auto-negotiation */ - data = mdio_read(dev, phy_addr, MII_CONTROL); - data |= MII_CNTL_RST_AUTO | MII_CNTL_AUTO; - mdio_write(dev, phy_addr, MII_CONTROL, data); - - if (au1000_debug > 4) - dump_mii(dev, phy_addr); - return 0; -} - -int bcm_5201_reset(struct net_device *dev, int phy_addr) -{ - s16 mii_control, timeout; - - mii_control = mdio_read(dev, phy_addr, MII_CONTROL); - mdio_write(dev, phy_addr, MII_CONTROL, mii_control | MII_CNTL_RESET); - mdelay(1); - for (timeout = 100; timeout > 0; --timeout) { - mii_control = mdio_read(dev, phy_addr, MII_CONTROL); - if ((mii_control & MII_CNTL_RESET) == 0) - break; - mdelay(1); - } - if (mii_control & MII_CNTL_RESET) { - printk(KERN_ERR "%s PHY reset timeout !\n", dev->name); - return -1; - } - return 0; -} - -int -bcm_5201_status(struct net_device *dev, int phy_addr, u16 *link, u16 *speed) -{ - u16 mii_data; - struct au1000_private *aup; - - if (!dev) { - printk(KERN_ERR "bcm_5201_status error: NULL dev\n"); - return -1; - } - aup = (struct au1000_private *) dev->priv; - - mii_data = mdio_read(dev, aup->phy_addr, MII_STATUS); - if (mii_data & MII_STAT_LINK) { - *link = 1; - mii_data = mdio_read(dev, aup->phy_addr, MII_AUX_CNTRL); - if (mii_data & MII_AUX_100) { - if (mii_data & MII_AUX_FDX) { - *speed = IF_PORT_100BASEFX; - dev->if_port = IF_PORT_100BASEFX; - } - else { - *speed = IF_PORT_100BASETX; - dev->if_port = IF_PORT_100BASETX; - } - } - else { - *speed = IF_PORT_10BASET; - dev->if_port = IF_PORT_10BASET; - } - - } - else { - *link = 0; - *speed = 0; - dev->if_port = IF_PORT_UNKNOWN; - } - return 0; -} - -int lsi_80227_init(struct net_device *dev, int phy_addr) -{ - if (au1000_debug > 4) - printk("lsi_80227_init\n"); - - /* restart auto-negotiation */ - mdio_write(dev, phy_addr, MII_CONTROL, - MII_CNTL_F100 | MII_CNTL_AUTO | MII_CNTL_RST_AUTO); // | MII_CNTL_FDX); - mdelay(1); - - /* set up LEDs to correct display */ -#ifdef CONFIG_MIPS_MTX1 - mdio_write(dev, phy_addr, 17, 0xff80); -#else - mdio_write(dev, phy_addr, 17, 0xffc0); -#endif - - if (au1000_debug > 4) - dump_mii(dev, phy_addr); - return 0; -} - -int lsi_80227_reset(struct net_device *dev, int phy_addr) -{ - s16 mii_control, timeout; - - if (au1000_debug > 4) { - printk("lsi_80227_reset\n"); - dump_mii(dev, phy_addr); - } - - mii_control = mdio_read(dev, phy_addr, MII_CONTROL); - mdio_write(dev, phy_addr, MII_CONTROL, mii_control | MII_CNTL_RESET); - mdelay(1); - for (timeout = 100; timeout > 0; --timeout) { - mii_control = mdio_read(dev, phy_addr, MII_CONTROL); - if ((mii_control & MII_CNTL_RESET) == 0) - break; - mdelay(1); - } - if (mii_control & MII_CNTL_RESET) { - printk(KERN_ERR "%s PHY reset timeout !\n", dev->name); - return -1; - } - return 0; -} - -int -lsi_80227_status(struct net_device *dev, int phy_addr, u16 *link, u16 *speed) -{ - u16 mii_data; - struct au1000_private *aup; - - if (!dev) { - printk(KERN_ERR "lsi_80227_status error: NULL dev\n"); - return -1; - } - aup = (struct au1000_private *) dev->priv; - - mii_data = mdio_read(dev, aup->phy_addr, MII_STATUS); - if (mii_data & MII_STAT_LINK) { - *link = 1; - mii_data = mdio_read(dev, aup->phy_addr, MII_LSI_PHY_STAT); - if (mii_data & MII_LSI_PHY_STAT_SPD) { - if (mii_data & MII_LSI_PHY_STAT_FDX) { - *speed = IF_PORT_100BASEFX; - dev->if_port = IF_PORT_100BASEFX; - } - else { - *speed = IF_PORT_100BASETX; - dev->if_port = IF_PORT_100BASETX; - } - } - else { - *speed = IF_PORT_10BASET; - dev->if_port = IF_PORT_10BASET; - } - - } - else { - *link = 0; - *speed = 0; - dev->if_port = IF_PORT_UNKNOWN; - } - return 0; -} - -int am79c901_init(struct net_device *dev, int phy_addr) -{ - printk("am79c901_init\n"); - return 0; -} - -int am79c901_reset(struct net_device *dev, int phy_addr) -{ - printk("am79c901_reset\n"); - return 0; -} - -int -am79c901_status(struct net_device *dev, int phy_addr, u16 *link, u16 *speed) -{ - return 0; -} - -int am79c874_init(struct net_device *dev, int phy_addr) -{ - s16 data; - - /* 79c874 has quit resembled bit assignments to BCM5201 */ - if (au1000_debug > 4) - printk("am79c847_init\n"); - - /* Stop auto-negotiation */ - data = mdio_read(dev, phy_addr, MII_CONTROL); - mdio_write(dev, phy_addr, MII_CONTROL, data & ~MII_CNTL_AUTO); - - /* Set advertisement to 10/100 and Half/Full duplex - * (full capabilities) */ - data = mdio_read(dev, phy_addr, MII_ANADV); - data |= MII_NWAY_TX | MII_NWAY_TX_FDX | MII_NWAY_T_FDX | MII_NWAY_T; - mdio_write(dev, phy_addr, MII_ANADV, data); - - /* Restart auto-negotiation */ - data = mdio_read(dev, phy_addr, MII_CONTROL); - data |= MII_CNTL_RST_AUTO | MII_CNTL_AUTO; - - mdio_write(dev, phy_addr, MII_CONTROL, data); - - if (au1000_debug > 4) dump_mii(dev, phy_addr); - return 0; -} - -int am79c874_reset(struct net_device *dev, int phy_addr) -{ - s16 mii_control, timeout; - - if (au1000_debug > 4) - printk("am79c874_reset\n"); - - mii_control = mdio_read(dev, phy_addr, MII_CONTROL); - mdio_write(dev, phy_addr, MII_CONTROL, mii_control | MII_CNTL_RESET); - mdelay(1); - for (timeout = 100; timeout > 0; --timeout) { - mii_control = mdio_read(dev, phy_addr, MII_CONTROL); - if ((mii_control & MII_CNTL_RESET) == 0) - break; - mdelay(1); - } - if (mii_control & MII_CNTL_RESET) { - printk(KERN_ERR "%s PHY reset timeout !\n", dev->name); - return -1; - } - return 0; -} - -int -am79c874_status(struct net_device *dev, int phy_addr, u16 *link, u16 *speed) -{ - u16 mii_data; - struct au1000_private *aup; - - // printk("am79c874_status\n"); - if (!dev) { - printk(KERN_ERR "am79c874_status error: NULL dev\n"); - return -1; - } - - aup = (struct au1000_private *) dev->priv; - mii_data = mdio_read(dev, aup->phy_addr, MII_STATUS); +/* autodetection defaults */ +#undef AU1XXX_PHY_SEARCH_HIGHEST_ADDR +#define AU1XXX_PHY1_SEARCH_ON_MAC0 - if (mii_data & MII_STAT_LINK) { - *link = 1; - mii_data = mdio_read(dev, aup->phy_addr, MII_AMD_PHY_STAT); - if (mii_data & MII_AMD_PHY_STAT_SPD) { - if (mii_data & MII_AMD_PHY_STAT_FDX) { - *speed = IF_PORT_100BASEFX; - dev->if_port = IF_PORT_100BASEFX; - } - else { - *speed = IF_PORT_100BASETX; - dev->if_port = IF_PORT_100BASETX; - } - } - else { - *speed = IF_PORT_10BASET; - dev->if_port = IF_PORT_10BASET; - } - - } - else { - *link = 0; - *speed = 0; - dev->if_port = IF_PORT_UNKNOWN; - } - return 0; -} - -int lxt971a_init(struct net_device *dev, int phy_addr) -{ - if (au1000_debug > 4) - printk("lxt971a_init\n"); - - /* restart auto-negotiation */ - mdio_write(dev, phy_addr, MII_CONTROL, - MII_CNTL_F100 | MII_CNTL_AUTO | MII_CNTL_RST_AUTO | MII_CNTL_FDX); - - /* set up LEDs to correct display */ - mdio_write(dev, phy_addr, 20, 0x0422); - - if (au1000_debug > 4) - dump_mii(dev, phy_addr); - return 0; -} - -int lxt971a_reset(struct net_device *dev, int phy_addr) -{ - s16 mii_control, timeout; - - if (au1000_debug > 4) { - printk("lxt971a_reset\n"); - dump_mii(dev, phy_addr); - } - - mii_control = mdio_read(dev, phy_addr, MII_CONTROL); - mdio_write(dev, phy_addr, MII_CONTROL, mii_control | MII_CNTL_RESET); - mdelay(1); - for (timeout = 100; timeout > 0; --timeout) { - mii_control = mdio_read(dev, phy_addr, MII_CONTROL); - if ((mii_control & MII_CNTL_RESET) == 0) - break; - mdelay(1); - } - if (mii_control & MII_CNTL_RESET) { - printk(KERN_ERR "%s PHY reset timeout !\n", dev->name); - return -1; - } - return 0; -} - -int -lxt971a_status(struct net_device *dev, int phy_addr, u16 *link, u16 *speed) -{ - u16 mii_data; - struct au1000_private *aup; - - if (!dev) { - printk(KERN_ERR "lxt971a_status error: NULL dev\n"); - return -1; - } - aup = (struct au1000_private *) dev->priv; - - mii_data = mdio_read(dev, aup->phy_addr, MII_STATUS); - if (mii_data & MII_STAT_LINK) { - *link = 1; - mii_data = mdio_read(dev, aup->phy_addr, MII_INTEL_PHY_STAT); - if (mii_data & MII_INTEL_PHY_STAT_SPD) { - if (mii_data & MII_INTEL_PHY_STAT_FDX) { - *speed = IF_PORT_100BASEFX; - dev->if_port = IF_PORT_100BASEFX; - } - else { - *speed = IF_PORT_100BASETX; - dev->if_port = IF_PORT_100BASETX; - } - } - else { - *speed = IF_PORT_10BASET; - dev->if_port = IF_PORT_10BASET; - } - - } - else { - *link = 0; - *speed = 0; - dev->if_port = IF_PORT_UNKNOWN; - } - return 0; -} - -int ks8995m_init(struct net_device *dev, int phy_addr) -{ - s16 data; - -// printk("ks8995m_init\n"); - /* Stop auto-negotiation */ - data = mdio_read(dev, phy_addr, MII_CONTROL); - mdio_write(dev, phy_addr, MII_CONTROL, data & ~MII_CNTL_AUTO); - - /* Set advertisement to 10/100 and Half/Full duplex - * (full capabilities) */ - data = mdio_read(dev, phy_addr, MII_ANADV); - data |= MII_NWAY_TX | MII_NWAY_TX_FDX | MII_NWAY_T_FDX | MII_NWAY_T; - mdio_write(dev, phy_addr, MII_ANADV, data); - - /* Restart auto-negotiation */ - data = mdio_read(dev, phy_addr, MII_CONTROL); - data |= MII_CNTL_RST_AUTO | MII_CNTL_AUTO; - mdio_write(dev, phy_addr, MII_CONTROL, data); - - if (au1000_debug > 4) dump_mii(dev, phy_addr); - - return 0; -} - -int ks8995m_reset(struct net_device *dev, int phy_addr) -{ - s16 mii_control, timeout; - -// printk("ks8995m_reset\n"); - mii_control = mdio_read(dev, phy_addr, MII_CONTROL); - mdio_write(dev, phy_addr, MII_CONTROL, mii_control | MII_CNTL_RESET); - mdelay(1); - for (timeout = 100; timeout > 0; --timeout) { - mii_control = mdio_read(dev, phy_addr, MII_CONTROL); - if ((mii_control & MII_CNTL_RESET) == 0) - break; - mdelay(1); - } - if (mii_control & MII_CNTL_RESET) { - printk(KERN_ERR "%s PHY reset timeout !\n", dev->name); - return -1; - } - return 0; -} - -int ks8995m_status(struct net_device *dev, int phy_addr, u16 *link, u16 *speed) -{ - u16 mii_data; - struct au1000_private *aup; - - if (!dev) { - printk(KERN_ERR "ks8995m_status error: NULL dev\n"); - return -1; - } - aup = (struct au1000_private *) dev->priv; - - mii_data = mdio_read(dev, aup->phy_addr, MII_STATUS); - if (mii_data & MII_STAT_LINK) { - *link = 1; - mii_data = mdio_read(dev, aup->phy_addr, MII_AUX_CNTRL); - if (mii_data & MII_AUX_100) { - if (mii_data & MII_AUX_FDX) { - *speed = IF_PORT_100BASEFX; - dev->if_port = IF_PORT_100BASEFX; - } - else { - *speed = IF_PORT_100BASETX; - dev->if_port = IF_PORT_100BASETX; - } - } - else { - *speed = IF_PORT_10BASET; - dev->if_port = IF_PORT_10BASET; - } - - } - else { - *link = 0; - *speed = 0; - dev->if_port = IF_PORT_UNKNOWN; - } - return 0; -} - -int -smsc_83C185_init (struct net_device *dev, int phy_addr) -{ - s16 data; - - if (au1000_debug > 4) - printk("smsc_83C185_init\n"); - - /* Stop auto-negotiation */ - data = mdio_read(dev, phy_addr, MII_CONTROL); - mdio_write(dev, phy_addr, MII_CONTROL, data & ~MII_CNTL_AUTO); - - /* Set advertisement to 10/100 and Half/Full duplex - * (full capabilities) */ - data = mdio_read(dev, phy_addr, MII_ANADV); - data |= MII_NWAY_TX | MII_NWAY_TX_FDX | MII_NWAY_T_FDX | MII_NWAY_T; - mdio_write(dev, phy_addr, MII_ANADV, data); - - /* Restart auto-negotiation */ - data = mdio_read(dev, phy_addr, MII_CONTROL); - data |= MII_CNTL_RST_AUTO | MII_CNTL_AUTO; - - mdio_write(dev, phy_addr, MII_CONTROL, data); - - if (au1000_debug > 4) dump_mii(dev, phy_addr); - return 0; -} - -int -smsc_83C185_reset (struct net_device *dev, int phy_addr) -{ - s16 mii_control, timeout; - - if (au1000_debug > 4) - printk("smsc_83C185_reset\n"); - - mii_control = mdio_read(dev, phy_addr, MII_CONTROL); - mdio_write(dev, phy_addr, MII_CONTROL, mii_control | MII_CNTL_RESET); - mdelay(1); - for (timeout = 100; timeout > 0; --timeout) { - mii_control = mdio_read(dev, phy_addr, MII_CONTROL); - if ((mii_control & MII_CNTL_RESET) == 0) - break; - mdelay(1); - } - if (mii_control & MII_CNTL_RESET) { - printk(KERN_ERR "%s PHY reset timeout !\n", dev->name); - return -1; - } - return 0; -} - -int -smsc_83C185_status (struct net_device *dev, int phy_addr, u16 *link, u16 *speed) -{ - u16 mii_data; - struct au1000_private *aup; - - if (!dev) { - printk(KERN_ERR "smsc_83C185_status error: NULL dev\n"); - return -1; - } - - aup = (struct au1000_private *) dev->priv; - mii_data = mdio_read(dev, aup->phy_addr, MII_STATUS); - - if (mii_data & MII_STAT_LINK) { - *link = 1; - mii_data = mdio_read(dev, aup->phy_addr, 0x1f); - if (mii_data & (1<<3)) { - if (mii_data & (1<<4)) { - *speed = IF_PORT_100BASEFX; - dev->if_port = IF_PORT_100BASEFX; - } - else { - *speed = IF_PORT_100BASETX; - dev->if_port = IF_PORT_100BASETX; - } - } - else { - *speed = IF_PORT_10BASET; - dev->if_port = IF_PORT_10BASET; - } - } - else { - *link = 0; - *speed = 0; - dev->if_port = IF_PORT_UNKNOWN; - } - return 0; -} - - -#ifdef CONFIG_MIPS_BOSPORUS -int stub_init(struct net_device *dev, int phy_addr) -{ - //printk("PHY stub_init\n"); - return 0; -} - -int stub_reset(struct net_device *dev, int phy_addr) -{ - //printk("PHY stub_reset\n"); - return 0; -} - -int -stub_status(struct net_device *dev, int phy_addr, u16 *link, u16 *speed) -{ - //printk("PHY stub_status\n"); - *link = 1; - /* hmmm, revisit */ - *speed = IF_PORT_100BASEFX; - dev->if_port = IF_PORT_100BASEFX; - return 0; -} -#endif - -struct phy_ops bcm_5201_ops = { - bcm_5201_init, - bcm_5201_reset, - bcm_5201_status, -}; - -struct phy_ops am79c874_ops = { - am79c874_init, - am79c874_reset, - am79c874_status, -}; - -struct phy_ops am79c901_ops = { - am79c901_init, - am79c901_reset, - am79c901_status, -}; - -struct phy_ops lsi_80227_ops = { - lsi_80227_init, - lsi_80227_reset, - lsi_80227_status, -}; - -struct phy_ops lxt971a_ops = { - lxt971a_init, - lxt971a_reset, - lxt971a_status, -}; +/* static PHY setup + * + * most boards PHY setup should be detectable properly with the + * autodetection algorithm in mii_probe(), but in some cases (e.g. if + * you have a switch attached, or want to use the PHY's interrupt + * notification capabilities) you can provide a static PHY + * configuration here + * + * IRQs may only be set, if a PHY address was configured + * If a PHY address is given, also a bus id is required to be set + * + * ps: make sure the used irqs are configured properly in the board + * specific irq-map + */ -struct phy_ops ks8995m_ops = { - ks8995m_init, - ks8995m_reset, - ks8995m_status, -}; +#if defined(CONFIG_MIPS_BOSPORUS) +/* + * Micrel/Kendin 5 port switch attached to MAC0, + * MAC0 is associated with PHY address 5 (== WAN port) + * MAC1 is not associated with any PHY, since it's connected directly + * to the switch. + * no interrupts are used + */ +# define AU1XXX_PHY_STATIC_CONFIG -struct phy_ops smsc_83C185_ops = { - smsc_83C185_init, - smsc_83C185_reset, - smsc_83C185_status, -}; +# define AU1XXX_PHY0_ADDR 5 +# define AU1XXX_PHY0_BUSID 0 +# undef AU1XXX_PHY0_IRQ -#ifdef CONFIG_MIPS_BOSPORUS -struct phy_ops stub_ops = { - stub_init, - stub_reset, - stub_status, -}; +# undef AU1XXX_PHY1_ADDR +# undef AU1XXX_PHY1_BUSID +# undef AU1XXX_PHY1_IRQ #endif -static struct mii_chip_info { - const char * name; - u16 phy_id0; - u16 phy_id1; - struct phy_ops *phy_ops; - int dual_phy; -} mii_chip_table[] = { - {"Broadcom BCM5201 10/100 BaseT PHY",0x0040,0x6212, &bcm_5201_ops,0}, - {"Broadcom BCM5221 10/100 BaseT PHY",0x0040,0x61e4, &bcm_5201_ops,0}, - {"Broadcom BCM5222 10/100 BaseT PHY",0x0040,0x6322, &bcm_5201_ops,1}, - {"NS DP83847 PHY", 0x2000, 0x5c30, &bcm_5201_ops ,0}, - {"AMD 79C901 HomePNA PHY",0x0000,0x35c8, &am79c901_ops,0}, - {"AMD 79C874 10/100 BaseT PHY",0x0022,0x561b, &am79c874_ops,0}, - {"LSI 80227 10/100 BaseT PHY",0x0016,0xf840, &lsi_80227_ops,0}, - {"Intel LXT971A Dual Speed PHY",0x0013,0x78e2, &lxt971a_ops,0}, - {"Kendin KS8995M 10/100 BaseT PHY",0x0022,0x1450, &ks8995m_ops,0}, - {"SMSC LAN83C185 10/100 BaseT PHY",0x0007,0xc0a3, &smsc_83C185_ops,0}, -#ifdef CONFIG_MIPS_BOSPORUS - {"Stub", 0x1234, 0x5678, &stub_ops }, +#if defined(AU1XXX_PHY0_BUSID) && (AU1XXX_PHY0_BUSID > 0) +# error MAC0-associated PHY attached 2nd MACs MII bus not supported yet #endif - {0,}, -}; -static int mdio_read(struct net_device *dev, int phy_id, int reg) +/* + * MII operations + */ +static int mdio_read(struct net_device *dev, int phy_addr, int reg) { struct au1000_private *aup = (struct au1000_private *) dev->priv; - volatile u32 *mii_control_reg; - volatile u32 *mii_data_reg; + volatile u32 *const mii_control_reg = &aup->mac->mii_control; + volatile u32 *const mii_data_reg = &aup->mac->mii_data; u32 timedout = 20; u32 mii_control; - #ifdef CONFIG_BCM5222_DUAL_PHY - /* First time we probe, it's for the mac0 phy. - * Since we haven't determined yet that we have a dual phy, - * aup->mii->mii_control_reg won't be setup and we'll - * default to the else statement. - * By the time we probe for the mac1 phy, the mii_control_reg - * will be setup to be the address of the mac0 phy control since - * both phys are controlled through mac0. - */ - if (aup->mii && aup->mii->mii_control_reg) { - mii_control_reg = aup->mii->mii_control_reg; - mii_data_reg = aup->mii->mii_data_reg; - } - else if (au_macs[0]->mii && au_macs[0]->mii->mii_control_reg) { - /* assume both phys are controlled through mac0 */ - mii_control_reg = au_macs[0]->mii->mii_control_reg; - mii_data_reg = au_macs[0]->mii->mii_data_reg; - } - else - #endif - { - /* default control and data reg addresses */ - mii_control_reg = &aup->mac->mii_control; - mii_data_reg = &aup->mac->mii_data; - } - while (*mii_control_reg & MAC_MII_BUSY) { mdelay(1); if (--timedout == 0) { @@ -835,7 +215,7 @@ static int mdio_read(struct net_device *dev, int phy_id, int reg) } mii_control = MAC_SET_MII_SELECT_REG(reg) | - MAC_SET_MII_SELECT_PHY(phy_id) | MAC_MII_READ; + MAC_SET_MII_SELECT_PHY(phy_addr) | MAC_MII_READ; *mii_control_reg = mii_control; @@ -851,32 +231,14 @@ static int mdio_read(struct net_device *dev, int phy_id, int reg) return (int)*mii_data_reg; } -static void mdio_write(struct net_device *dev, int phy_id, int reg, u16 value) +static void mdio_write(struct net_device *dev, int phy_addr, int reg, u16 value) { struct au1000_private *aup = (struct au1000_private *) dev->priv; - volatile u32 *mii_control_reg; - volatile u32 *mii_data_reg; + volatile u32 *const mii_control_reg = &aup->mac->mii_control; + volatile u32 *const mii_data_reg = &aup->mac->mii_data; u32 timedout = 20; u32 mii_control; - #ifdef CONFIG_BCM5222_DUAL_PHY - if (aup->mii && aup->mii->mii_control_reg) { - mii_control_reg = aup->mii->mii_control_reg; - mii_data_reg = aup->mii->mii_data_reg; - } - else if (au_macs[0]->mii && au_macs[0]->mii->mii_control_reg) { - /* assume both phys are controlled through mac0 */ - mii_control_reg = au_macs[0]->mii->mii_control_reg; - mii_data_reg = au_macs[0]->mii->mii_data_reg; - } - else - #endif - { - /* default control and data reg addresses */ - mii_control_reg = &aup->mac->mii_control; - mii_data_reg = &aup->mac->mii_data; - } - while (*mii_control_reg & MAC_MII_BUSY) { mdelay(1); if (--timedout == 0) { @@ -887,165 +249,145 @@ static void mdio_write(struct net_device *dev, int phy_id, int reg, u16 value) } mii_control = MAC_SET_MII_SELECT_REG(reg) | - MAC_SET_MII_SELECT_PHY(phy_id) | MAC_MII_WRITE; + MAC_SET_MII_SELECT_PHY(phy_addr) | MAC_MII_WRITE; *mii_data_reg = value; *mii_control_reg = mii_control; } +static int mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum) +{ + /* WARNING: bus->phy_map[phy_addr].attached_dev == dev does + * _NOT_ hold (e.g. when PHY is accessed through other MAC's MII bus) */ + struct net_device *const dev = bus->priv; + + enable_mac(dev, 0); /* make sure the MAC associated with this + * mii_bus is enabled */ + return mdio_read(dev, phy_addr, regnum); +} -static void dump_mii(struct net_device *dev, int phy_id) +static int mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum, + u16 value) { - int i, val; + struct net_device *const dev = bus->priv; - for (i = 0; i < 7; i++) { - if ((val = mdio_read(dev, phy_id, i)) >= 0) - printk("%s: MII Reg %d=%x\n", dev->name, i, val); - } - for (i = 16; i < 25; i++) { - if ((val = mdio_read(dev, phy_id, i)) >= 0) - printk("%s: MII Reg %d=%x\n", dev->name, i, val); - } + enable_mac(dev, 0); /* make sure the MAC associated with this + * mii_bus is enabled */ + mdio_write(dev, phy_addr, regnum, value); + return 0; } -static int mii_probe (struct net_device * dev) +static int mdiobus_reset(struct mii_bus *bus) { - struct au1000_private *aup = (struct au1000_private *) dev->priv; - int phy_addr; -#ifdef CONFIG_MIPS_BOSPORUS - int phy_found=0; -#endif + struct net_device *const dev = bus->priv; - /* search for total of 32 possible mii phy addresses */ - for (phy_addr = 0; phy_addr < 32; phy_addr++) { - u16 mii_status; - u16 phy_id0, phy_id1; - int i; + enable_mac(dev, 0); /* make sure the MAC associated with this + * mii_bus is enabled */ + return 0; +} - #ifdef CONFIG_BCM5222_DUAL_PHY - /* Mask the already found phy, try next one */ - if (au_macs[0]->mii && au_macs[0]->mii->mii_control_reg) { - if (au_macs[0]->phy_addr == phy_addr) - continue; - } - #endif - - mii_status = mdio_read(dev, phy_addr, MII_STATUS); - if (mii_status == 0xffff || mii_status == 0x0000) - /* the mii is not accessable, try next one */ - continue; - - phy_id0 = mdio_read(dev, phy_addr, MII_PHY_ID0); - phy_id1 = mdio_read(dev, phy_addr, MII_PHY_ID1); - - /* search our mii table for the current mii */ - for (i = 0; mii_chip_table[i].phy_id1; i++) { - if (phy_id0 == mii_chip_table[i].phy_id0 && - phy_id1 == mii_chip_table[i].phy_id1) { - struct mii_phy * mii_phy = aup->mii; - - printk(KERN_INFO "%s: %s at phy address %d\n", - dev->name, mii_chip_table[i].name, - phy_addr); -#ifdef CONFIG_MIPS_BOSPORUS - phy_found = 1; -#endif - mii_phy->chip_info = mii_chip_table+i; - aup->phy_addr = phy_addr; - aup->want_autoneg = 1; - aup->phy_ops = mii_chip_table[i].phy_ops; - aup->phy_ops->phy_init(dev,phy_addr); - - // Check for dual-phy and then store required - // values and set indicators. We need to do - // this now since mdio_{read,write} need the - // control and data register addresses. - #ifdef CONFIG_BCM5222_DUAL_PHY - if ( mii_chip_table[i].dual_phy) { - - /* assume both phys are controlled - * through MAC0. Board specific? */ - - /* sanity check */ - if (!au_macs[0] || !au_macs[0]->mii) - return -1; - aup->mii->mii_control_reg = (u32 *) - &au_macs[0]->mac->mii_control; - aup->mii->mii_data_reg = (u32 *) - &au_macs[0]->mac->mii_data; - } - #endif - goto found; - } +static int mii_probe (struct net_device *dev) +{ + struct au1000_private *const aup = (struct au1000_private *) dev->priv; + struct phy_device *phydev = NULL; + +#if defined(AU1XXX_PHY_STATIC_CONFIG) + BUG_ON(aup->mac_id < 0 || aup->mac_id > 1); + + if(aup->mac_id == 0) { /* get PHY0 */ +# if defined(AU1XXX_PHY0_ADDR) + phydev = au_macs[AU1XXX_PHY0_BUSID]->mii_bus.phy_map[AU1XXX_PHY0_ADDR]; +# else + printk (KERN_INFO DRV_NAME ":%s: using PHY-less setup\n", + dev->name); + return 0; +# endif /* defined(AU1XXX_PHY0_ADDR) */ + } else if (aup->mac_id == 1) { /* get PHY1 */ +# if defined(AU1XXX_PHY1_ADDR) + phydev = au_macs[AU1XXX_PHY1_BUSID]->mii_bus.phy_map[AU1XXX_PHY1_ADDR]; +# else + printk (KERN_INFO DRV_NAME ":%s: using PHY-less setup\n", + dev->name); + return 0; +# endif /* defined(AU1XXX_PHY1_ADDR) */ + } + +#else /* defined(AU1XXX_PHY_STATIC_CONFIG) */ + int phy_addr; + + /* find the first (lowest address) PHY on the current MAC's MII bus */ + for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) + if (aup->mii_bus.phy_map[phy_addr]) { + phydev = aup->mii_bus.phy_map[phy_addr]; +# if !defined(AU1XXX_PHY_SEARCH_HIGHEST_ADDR) + break; /* break out with first one found */ +# endif } - } -found: - -#ifdef CONFIG_MIPS_BOSPORUS - /* This is a workaround for the Micrel/Kendin 5 port switch - The second MAC doesn't see a PHY connected... so we need to - trick it into thinking we have one. - - If this kernel is run on another Au1500 development board - the stub will be found as well as the actual PHY. However, - the last found PHY will be used... usually at Addr 31 (Db1500). - */ - if ( (!phy_found) ) - { - u16 phy_id0, phy_id1; - int i; - phy_id0 = 0x1234; - phy_id1 = 0x5678; - - /* search our mii table for the current mii */ - for (i = 0; mii_chip_table[i].phy_id1; i++) { - if (phy_id0 == mii_chip_table[i].phy_id0 && - phy_id1 == mii_chip_table[i].phy_id1) { - struct mii_phy * mii_phy; - - printk(KERN_INFO "%s: %s at phy address %d\n", - dev->name, mii_chip_table[i].name, - phy_addr); - mii_phy = kmalloc(sizeof(struct mii_phy), - GFP_KERNEL); - if (mii_phy) { - mii_phy->chip_info = mii_chip_table+i; - aup->phy_addr = phy_addr; - mii_phy->next = aup->mii; - aup->phy_ops = - mii_chip_table[i].phy_ops; - aup->mii = mii_phy; - aup->phy_ops->phy_init(dev,phy_addr); - } else { - printk(KERN_ERR "%s: out of memory\n", - dev->name); - return -1; - } - mii_phy->chip_info = mii_chip_table+i; - aup->phy_addr = phy_addr; - aup->phy_ops = mii_chip_table[i].phy_ops; - aup->phy_ops->phy_init(dev,phy_addr); - break; - } +# if defined(AU1XXX_PHY1_SEARCH_ON_MAC0) + /* try harder to find a PHY */ + if (!phydev && (aup->mac_id == 1)) { + /* no PHY found, maybe we have a dual PHY? */ + printk (KERN_INFO DRV_NAME ": no PHY found on MAC1, " + "let's see if it's attached to MAC0...\n"); + + BUG_ON(!au_macs[0]); + + /* find the first (lowest address) non-attached PHY on + * the MAC0 MII bus */ + for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) { + struct phy_device *const tmp_phydev = + au_macs[0]->mii_bus.phy_map[phy_addr]; + + if (!tmp_phydev) + continue; /* no PHY here... */ + + if (tmp_phydev->attached_dev) + continue; /* already claimed by MAC0 */ + + phydev = tmp_phydev; + break; /* found it */ } } - if (aup->mac_id == 0) { - /* the Bosporus phy responds to addresses 0-5 but - * 5 is the correct one. - */ - aup->phy_addr = 5; - } -#endif +# endif /* defined(AU1XXX_PHY1_SEARCH_OTHER_BUS) */ - if (aup->mii->chip_info == NULL) { - printk(KERN_ERR "%s: Au1x No known MII transceivers found!\n", - dev->name); +#endif /* defined(AU1XXX_PHY_STATIC_CONFIG) */ + if (!phydev) { + printk (KERN_ERR DRV_NAME ":%s: no PHY found\n", dev->name); return -1; } - printk(KERN_INFO "%s: Using %s as default\n", - dev->name, aup->mii->chip_info->name); + /* now we are supposed to have a proper phydev, to attach to... */ + BUG_ON(!phydev); + BUG_ON(phydev->attached_dev); + + phydev = phy_connect(dev, phydev->dev.bus_id, &au1000_adjust_link, 0); + + if (IS_ERR(phydev)) { + printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name); + return PTR_ERR(phydev); + } + + /* mask with MAC supported features */ + phydev->supported &= (SUPPORTED_10baseT_Half + | SUPPORTED_10baseT_Full + | SUPPORTED_100baseT_Half + | SUPPORTED_100baseT_Full + | SUPPORTED_Autoneg + /* | SUPPORTED_Pause | SUPPORTED_Asym_Pause */ + | SUPPORTED_MII + | SUPPORTED_TP); + + phydev->advertising = phydev->supported; + + aup->old_link = 0; + aup->old_speed = 0; + aup->old_duplex = -1; + aup- |