index
:
linux
frominto-error
master
Contrib clone of linux
matthias
summary
refs
log
tree
commit
diff
stats
log msg
author
committer
range
path:
root
/
drivers
/
net
/
phy
/
broadcom.c
Age
Commit message (
Expand
)
Author
2018-06-05
net: phy: broadcom: Enable 125 MHz clock on LED4 pin for BCM54612E by default.
Kun Yi
2018-05-04
net: phy: broadcom: add support for BCM89610 PHY
Bhadram Varka
2017-12-15
net: phy: broadcom: Add entry for 5395 switch PHYs
Florian Fainelli
2017-12-04
net: phy: broadcom: re-add mistakenly removed config settings
Heiner Kallweit
2017-12-01
net: phy: remove generic settings for callbacks config_aneg and read_status f...
Heiner Kallweit
2017-10-12
net: phy: broadcom: support new device flag for setting master mode
Rafał Miłecki
2017-05-16
net: phy: Remove residual magic from PHY drivers
Andrew Lunn
2017-04-30
net: phy: Allow BCM5481x PHYs to setup internal TX/RX clock delay
Abhishek Shah
2017-02-01
net: phy: broadcom: rehook BCM54612E specific init
Rafał Miłecki
2017-01-27
net: phy: broadcom: add support for BCM54210E
Rafał Miłecki
2017-01-25
net: phy: broadcom: drop duplicated define for RGMII SKEW delay
Rafał Miłecki
2017-01-25
net: phy: broadcom: use auxctl reading helper in BCM54612E code
Rafał Miłecki
2016-12-10
net: phy: phy drivers should not set SUPPORTED_[Asym_]Pause
Timur Tabi
2016-11-24
net: phy: broadcom: Move bcm54xx_auxctl_{read, write} to common library
Florian Fainelli
2016-11-07
net: phy: broadcom: Add BCM54810 PHY entry
Jon Mason
2016-11-07
net: phy: broadcom: add bcm54xx_auxctl_read
Jon Mason
2016-10-26
net: phy: broadcom: Add support for BCM54612E
Xo Wang
2016-01-07
phy: Centralize setting driver module owner
Andrew Lunn
2015-11-23
broadcom: fix PHY_ID_BCM5481 entry in the id table
Aaro Koskinen
2015-10-08
net: phy: Add Broadcom phy library for common interfaces
Arun Parameswaran
2015-04-08
net: phy: broadcom: Add BCM54616S phy entry
Alessio Igor Bogani
2014-11-12
net: phy: replace phy_drivers_register calls
Johan Hovold
2014-08-23
net: phy: broadcom: move shadow 0x1C register accessors to brcmphy.h
Florian Fainelli
2014-08-23
net: phy: broadcom: extract all registers to brcmphy.h
Florian Fainelli
2014-02-14
net: phy: broadcom: extract register definitions
Florian Fainelli
2012-07-09
phylib: Support registering a bunch of drivers
Christian Hohnstaedt
2012-02-13
drivers/net: Remove boolean comparisons to true/false
Joe Perches
2011-09-27
treewide: Correct spelling of successfully in comments
Joe Perches
2010-10-05
net/phy: fix many "defined but unused" warnings
Uwe Kleine-König
2010-06-24
broadcom: Add 5241 support
Dmitry Baryshkov
2010-06-24
broadcom: move all PHY_ID's to header
Dmitry Baryshkov
2010-04-02
phylib: Add module table to all existing phy drivers
David Woodhouse
2010-02-17
tg3: Push phylib definitions to phylib
Matt Carlson
2010-01-03
broadcom: Fix &&/|| confusion in bcm54xx_adjust_rxrefclk()
roel kluin
2009-12-18
broadcom: bcm54xx_shadow_read() errors ignored in bcm54xx_adjust_rxrefclk()
Roel Kluin
2009-11-02
tg3 / broadcom: Optionally disable TXC if no link
Matt Carlson
2009-11-02
tg3 / broadcom: Add APD support for GPHYs
Matt Carlson
2009-11-02
tg3 / broadcom: Add code to disable rxc refclk
Matt Carlson
2009-11-02
tg3 / broadcom: Refine AC131 APD support
Matt Carlson
2009-11-02
tg3 / broadcom: Add PHY_BRCM_CLEAR_RGMII_MODE flag
Matt Carlson
2009-11-02
broadcom: Consolidate dev_flags definitions
Matt Carlson
2009-11-02
broadcom: Fix slow link problem
Matt Carlson
2009-11-02
broadcom: Isolate phy dsp accesses
Matt Carlson
2009-08-26
broadcom: Make the 57780 IEEE compliant
Matt Carlson
2009-08-26
broadcom: Add AC131 phy support
Matt Carlson
2009-08-26
broadcom: Add BCM50610M support
Matt Carlson
2008-11-21
broadcom: Add 57780 support
Matt Carlson
2008-11-03
broadcom: Add support for BCM50610
Matt Carlson
2008-11-03
broadcom: Refine expansion register access routine
Matt Carlson
2008-11-03
broadcom: Add flow control support
Matt Carlson
[next]