summaryrefslogtreecommitdiffstats
path: root/drivers/net/enic
AgeCommit message (Collapse)Author
2011-08-11enic: Move the Cisco driverJeff Kirsher
Move the Cisco driver into drivers/net/ethernet/cisco/ and make the necessary Kconfig and Makefile changes. CC: Christian Benvenuti <benve@cisco.com> CC: Vasanthy Kolluri <vkolluri@cisco.com> CC: Roopa Prabhu <roprabhu@cisco.com> CC: David Wang <dwang2@cisco.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-07-21enic: do vlan cleanupJiri Pirko
- unify vlan and nonvlan rx path - kill enic->vlan_group and enic_vlan_rx_register Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-30enic: Add support to configure hardware interrupt coalesce timers in a ↵Vasanthy Kolluri
platform independent way enic driver and the underlying hardware use different units for representing the interrupt coalesce timer. Driver converts the interrupt coalesce timer in usec to hardware cycles while setting the relevant hardware registers. The conversion factor can be different for each of the adapter hardware types. So it is dynamically learnt from the adapter firmware using the devcmd CMD_INTR_COAL_CONVERT. This allows the driver to configure the hardware interrupt coalesce timers in a platform independent way. Signed-off-by: Danny Guo <dannguo@cisco.com> Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David Wang <dwang2@cisco.com> Signed-off-by: David S. Miller <davem@conan.davemloft.net>
2011-06-09enic: Bug Fix: Fix hardware transmit queue indexing in enic_poll_controllerVasanthy Kolluri
Signed-off-by: Christian Benvenuti <benve@cisco.com> Signed-off-by: Danny Guo <dannguo@cisco.com> Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David Wang <dwang2@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-09enic: Get/Set interrupt resource index for transmit and receive queuesVasanthy Kolluri
Instead of deriving the index of a transmit/receive interrupt resource from the transmit/receive queue index, always save and retrieve it using an additional variable. Signed-off-by: Christian Benvenuti <benve@cisco.com> Signed-off-by: Danny Guo <dannguo@cisco.com> Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David Wang <dwang2@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-09enic: Log device configuration in detail during driver loadVasanthy Kolluri
Signed-off-by: Christian Benvenuti <benve@cisco.com> Signed-off-by: Danny Guo <dannguo@cisco.com> Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David Wang <dwang2@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-09enic: Pass 802.1p bits for packets tagged with vlan zeroVasanthy Kolluri
enic driver currently passes 802.1p bits to the upper layers for packets tagged with non-zero vlan ids only. This patch extends such behaviour to zero vlan tagged packets also. The patch is dependant on the following kernel patches: 1) vlan_dev: VLAN 0 should be treated as "no vlan tag" (802.1p packet) - net-next-2.6 git commit: ad1afb00393915a51c21b1ae8704562bf036855f - Available 2.6.36 and later 2) vlan: Centralize handling of hardware acceleration. - net-next-2.6 git commit: 3701e51382a026cba10c60b03efabe534fba4ca4 - Available 2.6.37 and later Signed-off-by: Christian Benvenuti <benve@cisco.com> Signed-off-by: Danny Guo <dannguo@cisco.com> Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David Wang <dwang2@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-08enic: update to support 64 bit statsstephen hemminger
The device driver already uses 64 bit statistics, it just doesn't use the 64 bit interface. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-06net: remove interrupt.h inclusion from netdevice.hAlexey Dobriyan
* remove interrupt.g inclusion from netdevice.h -- not needed * fixup fallout, add interrupt.h and hardirq.h back where needed. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-06enic: Add support for MTU change via port profile on a dynamic vnicRoopa Prabhu
enic driver gets MTU change notifications for MTU changes in the port profile associated to a dynamic vnic. This patch adds support in enic driver to set new MTU on the dynamic vnic and dynamically adjust its buffers with new MTU size in response to such notifications. Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: David Wang <dwang2@cisco.com> Signed-off-by: Christian Benvenuti <benve@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-05drivers/net: Remove unnecessary semicolonsJoe Perches
Semicolons are not necessary after switch/while/for/if braces so remove them. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-22Add appropriate <linux/prefetch.h> include for prefetch usersPaul Gortmaker
After discovering that wide use of prefetch on modern CPUs could be a net loss instead of a win, net drivers which were relying on the implicit inclusion of prefetch.h via the list headers showed up in the resulting cleanup fallout. Give them an explicit include via the following $0.02 script. ========================================= #!/bin/bash MANUAL="" for i in `git grep -l 'prefetch(.*)' .` ; do grep -q '<linux/prefetch.h>' $i if [ $? = 0 ] ; then continue fi ( echo '?^#include <linux/?a' echo '#include <linux/prefetch.h>' echo . echo w echo q ) | ed -s $i > /dev/null 2>&1 if [ $? != 0 ]; then echo $i needs manual fixup MANUAL="$i $MANUAL" fi done echo ------------------- 8\<---------------------- echo vi $MANUAL ========================================= Signed-off-by: Paul <paul.gortmaker@windriver.com> [ Fixed up some incorrect #include placements, and added some non-network drivers and the fib_trie.c case - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-29ethtool: cosmetic: Use ethtool ethtool_cmd_speed APIDavid Decotigny
This updates the network drivers so that they don't access the ethtool_cmd::speed field directly, but use ethtool_cmd_speed() instead. For most of the drivers, these changes are purely cosmetic and don't fix any problem, such as for those 1GbE/10GbE drivers that indirectly call their own ethtool get_settings()/mii_ethtool_gset(). The changes are meant to enforce code consistency and provide robustness with future larger throughputs, at the expense of a few CPU cycles for each ethtool operation. All drivers compiled with make allyesconfig ion x86_64 have been updated. Tested: make allyesconfig on x86_64 + e1000e/bnx2x work Signed-off-by: David Decotigny <decot@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-07net: enic: convert to hw_featuresMichał Mirosław
As the driver uses GRO and not LRO, LRO settings are ignored anyway and are removed here to avoid confusion. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-30enic: Add support for PORT_REQUEST_PREASSOCIATE_RRRoopa Prabhu
Current enic code only supports ASSOCIATE and DISASSOCIATE port profile operations. This patch adds enic support for port profile PORT_REQUEST_PREASSOCIATE_RR operation. The VIC adapter (8021qbh) is capable of handling port profile requests done in two steps namely PREASSOCIATE_RR and ASSOCIATE today. The motivation to support PREASSOCIATE_RR comes mainly from its use as an optimization during VM migration ie, to do resource reservation on destination host before resources on source host are released. PREASSOCIATE_RR is a VDP operation and according to the latest at IEEE, 8021qbh will also need to support VDP commands. In addition to handling the new PORT_REQUEST_PREASSOCIATE_RR operation this patch also does the below: - Introduces handlers for PORT_REQUEST operations - Moves most of the port profile handling code to new files enic_pp.[ch] - Uses new fw devcmds for port profile operations Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David Wang <dwang2@cisco.com> Signed-off-by: Christian Benvenuti <benve@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-30enic: Cleanups in port profile helper codeRoopa Prabhu
This patch does the following: - Introduces a new macro VIC_PROVINFO_ADD_TLV - Adds a new OS type in vic_generic_prov_os_type - Changes some vic_provinfo* helper routine args to constants Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David Wang <dwang2@cisco.com> Signed-off-by: Christian Benvenuti <benve@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-30enic: Add wrapper routines for new fw devcmds for port profile handlingRoopa Prabhu
This patch adds wrapper routines to new port profile related fw devcmds and removes the old ones Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David Wang <dwang2@cisco.com> Signed-off-by: Christian Benvenuti <benve@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-30enic: Add support for new fw devcmds for port profile handlingRoopa Prabhu
This patch introduces new fw devcmds for port profile handling. These new commands are similar to the current fw commands for port profile handling. The only difference being that the new commands split the existing port profile handling devcmds into multiple fw commands, giving the driver finer control over port profile operations. Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David Wang <dwang2@cisco.com> Signed-off-by: Christian Benvenuti <benve@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-14enic: Support newer version of firmware devcmd CMD_MCPU_FW_INFOVasanthy Kolluri
This patch provides support to the newer version of firmware devcmd CMD_MCPU_FW_INFO that returns additional information (ASIC type and revision) about the underlying hardware. This knowledge is required by the driver to implement any hardware specific features. Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David Wang <dwang2@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-28enic: Flush driver cache of registered addr lists during port profile ↵Roopa Prabhu
disassociate During a port profile disassociate all address registrations for the interface are blown away from the adapter. This patch resets the driver cache of registered address lists to zero after a port profile disassociate. Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David Wang <dwang2@cisco.com> Signed-off-by: Christian Benvenuti <benve@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-17enic: Always use single transmit and single receive hardware queues per deviceVasanthy Kolluri
We believe that our earlier patch for supporting multiple hardware receive queues per enic device requires more internal testing. At this point, we think that it's best to disable the use of multiple receive queues. The current patch provides an effective means for the same. Also, we continue to disallow multiple hardware transmit queues per device. But change the way we enforce this in order to maintain consistency with the way receive queues are handled. Signed-off-by: Christian Benvenuti <benve@cisco.com> Signed-off-by: Danny Guo <dannguo@cisco.com> Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David Wang <dwang2@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-17enic: Clean up: Remove a not needed #ifdefVasanthy Kolluri
Signed-off-by: Christian Benvenuti <benve@cisco.com> Signed-off-by: Danny Guo <dannguo@cisco.com> Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David Wang <dwang2@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-17enic: Bug fix: Reset driver count of registered unicast addresses to zero ↵Vasanthy Kolluri
during device reset During a device reset, clear the counter for the no. of unicast addresses registered. Also, rename the routines that update unicast and multicast address lists. Signed-off-by: Christian Benvenuti <benve@cisco.com> Signed-off-by: Danny Guo <dannguo@cisco.com> Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David Wang <dwang2@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-07enic: Clean up: Remove support for an older version of hardwareVasanthy Kolluri
Remove support for an older version (A1) of hardware Signed-off-by: Christian Benvenuti <benve@cisco.com> Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David Wang <dwang2@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-07enic: Bug Fix: Reorder firmware devcmds - CMD_INIT and CMD_IG_VLAN_REWRITE_MODEVasanthy Kolluri
Firmware requires CMD_IG_VLAN_REWRITE_MODE be issued before a CMD_INIT. Signed-off-by: Christian Benvenuti <benve@cisco.com> Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David Wang <dwang2@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-07enic: Bug Fix: Fix return values of enic_add/del_station_addr routinesVasanthy Kolluri
Fix enic_add/del_station_addr routines to return appropriate error code when an invalid address is added or deleted. Signed-off-by: Christian Benvenuti <benve@cisco.com> Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David Wang <dwang2@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-07enic: Clean up: Organize devcmd wrapper routinesVasanthy Kolluri
Organize the wrapper routines for firmware devcmds into a separate file. Signed-off-by: Christian Benvenuti <benve@cisco.com> Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David Wang <dwang2@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-07enic: Decouple mac address registration and deregistration from port profile ↵Roopa Prabhu
set operation This patch removes VM mac address registration and deregistration code during port profile set operation. We can delay mac address registration until enic_open. Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David Wang <dwang2@cisco.com> Signed-off-by: Christian Benvenuti <benve@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-20enic: Bug Fix: Dont reset ENIC_SET_APPLIED flag on port profile disassociateRoopa Prabhu
enic_get_vf_port returns port profile operation status only if ENIC_SET_APPLIED flag is set. A recent rework of enic_set_port_profile added code to reset this flag on disassociate. As a result of which a client calling enic_get_vf_port to get the status of port profile disassociate will always get a return value of ENODATA. This patch renames ENIC_SET_APPLIED to more appropriate ENIC_PORT_REQUEST_APPLIED and reverts back the recent change so that the flag is set both at associate and disassociate of a port profile. Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David Wang <dwang2@cisco.com> Signed-off-by: Christian Benvenuti <benve@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-17Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/bnx2x/bnx2x.h drivers/net/wireless/iwlwifi/iwl-1000.c drivers/net/wireless/iwlwifi/iwl-6000.c drivers/net/wireless/iwlwifi/iwl-core.h drivers/vhost/vhost.c
2010-12-16net: Fix drivers advertising HW_CSUM feature to use csum_startMichał Mirosław
Some drivers are using skb_transport_offset(skb) instead of skb->csum_start for NETIF_F_HW_CSUM offload. This does not matter now, but if someone implements checksumming of encapsulated packets then this will break silently. TSO output paths are left as they are, since they are for IP+TCP only (might be worth converting though). Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-12drivers/net: don't use flush_scheduled_work()Tejun Heo
flush_scheduled_work() is on its way out. This patch contains simple conversions to replace flush_scheduled_work() usage with direct cancels and flushes. Directly cancel the used works on driver detach and flush them in other cases. The conversions are mostly straight forward and the only dangers are, * Forgetting to cancel/flush one or more used works. * Cancelling when a work should be flushed (ie. the work must be executed once scheduled whether the driver is detaching or not). I've gone over the changes multiple times but it would be much appreciated if you can review with the above points in mind. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jay Cliburn <jcliburn@gmail.com> Cc: Michael Chan <mchan@broadcom.com> Cc: Divy Le Ray <divy@chelsio.com> Cc: e1000-devel@lists.sourceforge.net Cc: Vasanthy Kolluri <vkolluri@cisco.com> Cc: Samuel Ortiz <samuel@sortiz.org> Cc: Lennert Buytenhek <buytenh@wantstofly.org> Cc: Andrew Gallatin <gallatin@myri.com> Cc: Francois Romieu <romieu@fr.zoreil.com> Cc: Ramkrishna Vepa <ramkrishna.vepa@exar.com> Cc: Matt Carlson <mcarlson@broadcom.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Shreyas Bhatewara <sbhatewara@vmware.com> Cc: netdev@vger.kernel.org
2010-12-10enic: Move enic port profile handling code to a new 802.1Qbh provisioning ↵Roopa Prabhu
info type Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David Wang <dwang2@cisco.com> Signed-off-by: Christian Benvenuti <benve@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-10enic: Use VF mac set by IFLA_VF_MAC in port profile provisioning dataRoopa Prabhu
This patch adds support in enic 802.1Qbh port profile provisioning code to use the mac address set by IFLA_VF_MAC. For now we handle this mac as a special case for a VM mac address sent to us by libvirt. The VM mac address is sent to the switch along with the rest of the port profile provisioning data. This patch also adds calls to register and deregister the mac address during port profile association/deassociation. Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David Wang <dwang2@cisco.com> Signed-off-by: Christian Benvenuti <benve@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-10enic: Add ndo_set_vf_mac support for enic dynamic devicesRoopa Prabhu
This patch implements the ndo_set_vf_mac netdev operation for enic dynamic devices. It treats the mac address set by IFLA_VF_MAC as a special case to use it in the port profile provisioning data. Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David Wang <dwang2@cisco.com> Signed-off-by: Christian Benvenuti <benve@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-10enic: Add ndo_set_rx_mode support for enic vnicsRoopa Prabhu
Add ndo_set_rx_mode support to register unicast and multicast address filters for enic devices Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: David Wang <dwang2@cisco.com> Signed-off-by: Christian Benvenuti <benve@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-10enic: Bug Fix: Pass napi reference to the isr that services receive queueVasanthy Kolluri
Pass reference to napi instead of enic device to the isr that services receive queue. Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David Wang <dwang2@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-15enic: Fix build warningsVasanthy Kolluri
Fix data type of argument passed to pci_alloc_consistent and pci_free_consistent routines. Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David Wang <dwang2@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21vlan: Don't check for vlan group before vlan_tx_tag_present.Jesse Gross
Many (but not all) drivers check to see whether there is a vlan group configured before using a tag stored in the skb. There's not much point in this check since it just throws away data that should only be present in the expected circumstances. However, it will soon be legal and expected to get a vlan tag when no vlan group is configured, so remove this check from all drivers to avoid dropping the tags. Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21enic: Fix log messageVasanthy Kolluri
Fix a log message Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David Wang <dwang2@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21enic: Change min MTUVasanthy Kolluri
Change min MTU to 68. Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David Wang <dwang2@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21enic: Replace firmware devcmd CMD_ENABLE with CMD_ENABLE_WAITVasanthy Kolluri
Replace no wait CMD_ENABLE firmware devcmd with CMD_ENABLE_WAIT Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David Wang <dwang2@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21enic: Make firmware cognizant of the user set mac addressVasanthy Kolluri
Let the firmware know about the mac address set by the user using ndo_set_mac_address Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David Wang <dwang2@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21enic: Add support for multiple hardware receive queuesVasanthy Kolluri
Add support for multiple hardware receive queues. The ingress traffic is hashed into one of the receive queues based on IP or TCP or both headers. The max no. of receive queues supported is 8. Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David Wang <dwang2@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-01enic: Make local functions staticVasanthy Kolluri
Make functions used locally in a file as static Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David Wang <dwang2@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-01enic: Remove dead codeVasanthy Kolluri
Removed code that is unused Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David Wang <dwang2@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-26drivers/net: return operator cleanupEric Dumazet
Change "return (EXPR);" to "return EXPR;" return is not a function, parentheses are not required. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-17enic: Mark intr_timer in vnic_enet_config as deprecatedRoopa Prabhu
Signed-off-by: Scott Feldman <scofeldm@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-17enic: Check if rq/wq buf not NULL before freeing themRoopa Prabhu
Signed-off-by: Scott Feldman <scofeldm@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-17enic: Clean up: remove enic_dev_stats_clearRoopa Prabhu
Remove function enic_dev_stats_clear and its reference in enic device init code. Firmware clears device stats on device open. So, no need for the driver to do it again. Signed-off-by: Scott Feldman <scofeldm@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>