Age | Commit message (Collapse) | Author |
|
PASID is defined as a few different types in iommu including "int",
"u32", and "unsigned int". To be consistent and to match with uapi
definitions, define PASID and its variations (e.g. max PASID) as "u32".
"u32" is also shorter and a little more explicit than "unsigned int".
No PASID type change in uapi although it defines PASID as __u64 in
some places.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Joerg Roedel <jroedel@suse.de>
Link: https://lkml.kernel.org/r/1600187413-163670-2-git-send-email-fenghua.yu@intel.com
|
|
Up to this point, those functions are all the same for all ASICs, so
no need to call them by functions pointers. Removing the function
pointers will greatly increase the code readablity. If there is ever
need for those function pointers, we can add it back then.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
dorbell_off in the queue properties is mainly used for the doorbell dw
offset in pci bar. We should not set it to the doorbell byte offset in
process doorbell pages. This makes the code much easier to read.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
get_atc_vmid_pasid_mapping_valid() is very similar to
get_atc_vmid_pasid_mapping_pasid(), so they can be merged into a new
function get_atc_vmid_pasid_mapping_info() to reduce register access
times. More importantly, getting the PASID and the valid bit atomically
with a single read fixes some potential race conditions where the
mapping changes between the two reads.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Since KFD pasid starts from 0x8000 (32768 in decimal), it is better
perceived as a hex number. Meanwhile, change the pasid type from
unsigned int to uint16_t to be consistent throughout the code.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Signed-off-by: Yong Zhao <yong.zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
Don't use sizeof(uint32_t) or similar types for hardware or firmware
DWORD size. The hardware and firmware don't care about Linux types.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
Signed-off-by: Yong Zhao <yong.zhao@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
The hard-coded values related to VMID were removed in KFD, as those
values can be calculated in the KFD initialization function.
v2: remove unnecessary local variable
Signed-off-by: Yong Zhao <yong.zhao@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
In most cases, BUG_ONs can be replaced with WARN_ON with an error
return. In some void functions just turn them into a WARN_ON and
possibly an early exit.
v2:
* Cleaned up error handling in pm_send_unmap_queue
* Removed redundant WARN_ON in kfd_process_destroy_delayed
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
Remove BUG_ONs that check for NULL pointer arguments that are
dereferenced in the same function. Dereferencing the NULL pointer
will generate a BUG anyway, so the explicit check is redundant and
unnecessary overhead.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
Upstream prefers the !x notation to x==NULL or x==false. Along those lines
change the ==true or !=NULL references as well. Also make the references
to !x the same, excluding () for readability.
Signed-off-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
Consolidate log commands so that dev_info(NULL, "Error...") uses the more
accurate pr_err, remove the module name from the log (can be seen via
dynamic debugging with +m), and the function name (can be seen via
dynamic debugging with +f). We also don't need debug messages saying
what function we're in. Those can be added by devs when needed
Don't print vendor and device ID in error messages. They are typically
the same for all GPUs in a multi-GPU system. So this doesn't add any
value to the message.
Lastly, remove parentheses around %d, %i and 0x%llX.
According to kernel.org:
"Printing numbers in parentheses (%d) adds no value and should be
avoided."
Signed-off-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
Using checkpatch.pl -f <file> showed a number of style issues. This
patch addresses as many of them as possible. Some long lines have been
left for readability, but attempts to minimize them have been made.
v2: Broke long lines in gfx_v7 get_fw_version
Signed-off-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
kfd2kgd->address_watch_get_offset returns dword register offsets.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
At the end of the function we expect "status" to be zero, but it's
either -EINVAL or uninitialized.
Fixes: 788bf83db301 ('drm/amdkfd: Add wave control operation to debugger')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
The CONFIG_ prefix is reserved for Kconfig options in Make and CPP
syntax. Various static analysis tools rely on this naming convention
and check if CONFIG_ prefixed symbols are defined Kconfig. Hence add
yet another prefix AMD_ to CONFIG_REG_{BASE,END,SISE} to apply to this
convention and make static analysis tools happy.
Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
This commit makes sure that on process termination, after
we're destroying all the active queues, we're killing all the
existing wave front of the current process.
By doing this we're making sure that if any of the CUs were blocked
by infinite loop we're enforcing it to end the shader explicitly.
Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
The address watch operation gives the ability to specify watch points
which will generate a shader breakpoint, based on a specified single
address or range of addresses.
There is support for read/write/any access modes.
Signed-off-by: Yair Shachar <yair.shachar@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
The wave control operation supports several command types executed upon
existing wave fronts that belong to the currently debugged process.
The available commands are:
HALT - Freeze wave front(s) execution
RESUME - Resume freezed wave front(s) execution
KILL - Kill existing wave front(s)
Signed-off-by: Yair Shachar <yair.shachar@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
This patch adds the skeleton H/W debugger module support. This code
enables registration and unregistration of a single HSA process at a
time.
The module saves the process's pasid and use it to verify that only the
registered process is allowed to execute debugger operations through the
kernel driver.
v2: rename get_dbgmgr_mutex to kfd_get_dbgmgr_mutex to namespace it
Signed-off-by: Yair Shachar <yair.shachar@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|