summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot
AgeCommit message (Collapse)Author
2020-02-08Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds
Pull ARM Device-tree updates from Olof Johansson: "New SoCs: - Atmel/Microchip SAM9X60 (ARM926 SoC) - OMAP 37xx gets split into AM3703/AM3715/DM3725, who are all variants of it with different GPU/media IP configurations. - ST stm32mp15 SoCs (1-2 Cortex-A7, CAN, GPU depending on SKU) - ST Ericsson ab8505 (variant of ab8500) and db8520 (variant of db8500) - Unisoc SC9863A SoC (8x Cortex-A55 mobile chipset w/ GPU, modem) - Qualcomm SC7180 (8-core 64bit SoC, unnamed CPU class) New boards: - Allwinner: + Emlid Neutis SoM (H3 variant) + Libre Computer ALL-H3-IT + PineH64 Model B - Amlogic: + Libretech Amlogic GX PC (s905d and s912-based variants) - Atmel/Microchip: + Kizboxmini, sam9x60 EK, sama5d27 Wireless SOM (wlsom1) - Marvell: + Armada 385-based SolidRun Clearfog GTR - NXP: + Gateworks GW59xx boards based on i.MX6/6Q/6QDL + Tolino Shine 3 eBook reader (i.MX6sl) + Embedded Artists COM (i.MX7ULP) + SolidRun CLearfog CX/ITX and HoneyComb (LX2160A-based systems) + Google Coral Edge TPU (i.MX8MQ) - Rockchip: + Radxa Dalang Carrier (supports rk3288 and rk3399 SOMs) + Radxa Rock Pi N10 (RK3399Pro-based) + VMARC RK3399Pro SOM - ST: + Reference boards for stm32mp15 - ST Ericsson: + Samsung Galaxy S III mini (GT-I8190) + HREF520 reference board for DB8520 - TI OMAP: + Gen1 Amazon Echo (OMAP3630-based) - Qualcomm: + Inforce 6640 Single Board Computer (msm8996-based) + SC7180 IDP (SC7180-based)" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (623 commits) dt-bindings: fix compilation error of the example in marvell,mmp3-hsic-phy.yaml arm64: dts: ti: k3-am654-base-board: Add CSI2 OV5640 camera arm64: dts: ti: k3-am65-main Add CAL node arm64: dts: ti: k3-j721e-main: Add McASP nodes arm64: dts: ti: k3-am654-main: Add McASP nodes arm64: dts: ti: k3-j721e: DMA support arm64: dts: ti: k3-j721e-main: Move secure proxy and smmu under main_navss arm64: dts: ti: k3-j721e-main: Correct main NAVSS representation arm64: dts: ti: k3-j721e: Correct the address for MAIN NAVSS arm64: dts: ti: k3-am65: DMA support arm64: dts: ti: k3-am65-main: Move secure proxy under cbass_main_navss arm64: dts: ti: k3-am65-main: Correct main NAVSS representation ARM: dts: aspeed: rainier: Add UCD90320 power sequencer ARM: dts: aspeed: rainier: Switch PSUs to unknown version arm64: dts: rockchip: Kill off "simple-panel" compatibles ARM: dts: rockchip: Kill off "simple-panel" compatibles arm64: dts: rockchip: rename dwmmc node names to mmc ARM: dts: rockchip: rename dwmmc node names to mmc arm64: dts: exynos: Rename Samsung and Exynos to lowercase arm64: dts: uniphier: add reset-names to NAND controller node ...
2020-02-04Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds
Pull ARM updates from Russell King: - decompressor updates - prevention of out-of-bounds access while stacktracing - fix a section mismatch warning with free_memmap() - make kexec depend on MMU to avoid some build errors - remove swapops stubs * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8954/1: NOMMU: remove stubs for swapops ARM: 8952/1: Disable kmemleak on XIP kernels ARM: 8951/1: Fix Kexec compilation issue. ARM: 8949/1: mm: mark free_memmap as __init ARM: 8948/1: Prevent OOB access in stacktrace ARM: 8945/1: decompressor: use CONFIG option instead of cc-option ARM: 8942/1: Revert "8857/1: efi: enable CP15 DMB instructions before cleaning the cache" ARM: 8941/1: decompressor: enable CP15 barrier instructions in v7 cache setup code
2020-02-03Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "There are a few changes to the core framework this time around, in addition to the normal collection of driver updates to support new SoCs, fix incorrect data, and convert various drivers to clk_hw based APIs. In the core, we allow clk_ops::init() to return an error code now so that we can fail clk registration if the callback does something like fail to allocate memory. We also add a new "terminate" clk_op so that things done in clk_ops::init() can be undone, e.g. free memory. We also spit out a warning now when critical clks fail to enable and we support changing clk rates and enable/disable state through debugfs when developers compile the kernel themselves. On the driver front, we get support for what seems like a lot of Qualcomm and NXP SoCs given that those vendors dominate the diffstat. There are a couple new drivers for Xilinx and Amlogic SoCs too. The updates are all small things like fixing the way glitch free muxes switch parents, avoiding div-by-zero problems, or fixing data like parent names. See the updates section below for more details. Finally, the "basic" clk types have been converted to support specifying parents with clk_hw pointers. This work includes an overhaul of the fixed-rate clk type to be more modern by using clk_hw APIs. Core: - Let clk_ops::init() return an error code - Add a clk_ops::terminate() callback to undo clk_ops::init() - Warn about critical clks that fail to enable or prepare - Support dangerous debugfs actions on clks with dead code New Drivers: - Support for Xilinx Versal platform clks - Display clk controller on qcom sc7180 - Video clk controller on qcom sc7180 - Graphics clk controller on qcom sc7180 - CPU PLLs for qcom msm8916 - Move qcom msm8974 gfx3d clk to RPM control - Display port clk support on qcom sdm845 SoCs - Global clk controller on qcom ipq6018 - Add a driver for BCLK of Freescale SAI cores - Add cam, vpe and sgx clock support for TI dra7 - Add aess clock support for TI omap5 - Enable clks for CPUfreq on Allwinner A64 SoCs - Add Amlogic meson8b DDR clock controller - Add input clocks to Amlogic meson8b controllers - Add SPIBSC (SPI FLASH) clock on Renesas RZ/A2 - i.MX8MP clk driver support Updates: - Convert gpio, fixed-factor, mux, gate, divider basic clks to hw based APIs - Detect more PRMCU variants in ux500 driver - Adjust the composite clk type to new way of describing clk parents - Fixes for clk controllers on qcom msm8998 SoCs - Fix gmac main clock for TI dra7 - Move TI dra7-atl clock header to correct location - Fix hidden node name dependency on TI clkctrl clocks - Fix Amlogic meson8b mali clock update using the glitch free mux - Fix Amlogic pll driver division by zero at init - Prepare for split of Renesas R-Car H3 ES1.x and ES2.0+ config symbols - Switch more i.MX clk drivers to clk_hw based APIs - Disable non-functional divider between pll4_audio_div and pll4_post_div on imx6q - Fix watchdog2 clock name typo in imx7ulp clock driver - Set CLK_GET_RATE_NOCACHE flag for DRAM related clocks on i.MX8M SoCs - Suppress bind attrs for i.MX8M clock driver - Add a big comment in imx8qxp-lpcg driver to tell why devm_platform_ioremap_resource() shouldn't be used for the driver - A correction on i.MX8MN usb1_ctrl parent clock setting" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (140 commits) dt/bindings: clk: fsl,plldig: Drop 'bindings' from schema id clk: ls1028a: Fix warning on clamp() usage clk: qoriq: add ls1088a hwaccel clocks support clk: ls1028a: Add clock driver for Display output interface dt/bindings: clk: Add YAML schemas for LS1028A Display Clock bindings clk: fsl-sai: new driver dt-bindings: clock: document the fsl-sai driver clk: composite: add _register_composite_pdata() variants clk: qcom: rpmh: Sort OF match table dt-bindings: fix warnings in validation of qcom,gcc.yaml dt-binding: fix compilation error of the example in qcom,gcc.yaml clk: zynqmp: Add support for clock with CLK_DIVIDER_POWER_OF_TWO flag clk: zynqmp: Fix divider calculation clk: zynqmp: Add support for get max divider clk: zynqmp: Warn user if clock user are more than allowed clk: zynqmp: Extend driver for versal dt-bindings: clock: Add bindings for versal clock driver clk: ti: clkctrl: Fix hidden dependency to node name clk: ti: add clkctrl data dra7 sgx clk: ti: omap5: Add missing AESS clock ...
2020-01-29Merge tag 'usb-5.6-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/Thunderbolt/PHY driver updates from Greg KH: "Here is the big USB and Thunderbolt and PHY driver updates for 5.6-rc1. With the advent of USB4, "Thunderbolt" has really become USB4, so the renaming of the Kconfig option and starting to share subsystem code has begun, hence both subsystems coming in through the same tree here. PHY driver updates also touched USB drivers, so that is coming in through here as well. Major stuff included in here are: - USB 4 initial support added (i.e. Thunderbolt) - musb driver updates - USB gadget driver updates - PHY driver updates - USB PHY driver updates - lots of USB serial stuff fixed up - USB typec updates - USB-IP fixes - lots of other smaller USB driver updates All of these have been in linux-next for a while now (the usb-serial tree is already tested in linux-next on its own before merged into here), with no reported issues" [ Removed an incorrect compile test enablement for PHY_EXYNOS5250_SATA that causes configuration warnings - Linus ] * tag 'usb-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (207 commits) Doc: ABI: add usb charger uevent usb: phy: show USB charger type for user usb: cdns3: fix spelling mistake and rework grammar in text usb: phy: phy-gpio-vbus-usb: Convert to GPIO descriptors USB: serial: cyberjack: fix spelling mistake "To" -> "Too" USB: serial: ir-usb: simplify endpoint check USB: serial: ir-usb: make set_termios synchronous USB: serial: ir-usb: fix IrLAP framing USB: serial: ir-usb: fix link-speed handling USB: serial: ir-usb: add missing endpoint sanity check usb: typec: fusb302: fix "op-sink-microwatt" default that was in mW usb: typec: wcove: fix "op-sink-microwatt" default that was in mW usb: dwc3: pci: add ID for the Intel Comet Lake -V variant usb: typec: tcpci: mask event interrupts when remove driver usb: host: xhci-tegra: set MODULE_FIRMWARE for tegra186 usb: chipidea: add inline for ci_hdrc_host_driver_init if host is not defined usb: chipidea: handle single role for usb role class usb: musb: fix spelling mistake: "periperal" -> "peripheral" phy: ti: j721e-wiz: Fix build error without CONFIG_OF_ADDRESS USB: usbfs: Always unlink URBs in reverse order ...
2020-01-27ARM: dts: bcm2711: Enable thermalStefan Wahren
This enables thermal for the BCM2711 (used on Raspberry Pi 4) by adding the AVS monitor and a subnode for the thermal part. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1578941778-23321-4-git-send-email-stefan.wahren@i2se.com
2020-01-25ARM: 8945/1: decompressor: use CONFIG option instead of cc-optionMasahiro Yamada
The Kconfig stage (arch/Kconfig) has already evaluated whether the compiler supports -fno-stack-protector. You can use CONFIG_CC_HAS_STACKPROTECTOR_NONE instead of invoking the compiler to check the flag here. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-01-25ARM: 8942/1: Revert "8857/1: efi: enable CP15 DMB instructions before ↵Ard Biesheuvel
cleaning the cache" This reverts commit e17b1af96b2afc38e684aa2f1033387e2ed10029, which is no longer necessary now that the v7 specific routines take care not to issue CP15 barrier instructions before they are enabled in SCTLR. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-01-25ARM: 8941/1: decompressor: enable CP15 barrier instructions in v7 cache ↵Ard Biesheuvel
setup code Commit e17b1af96b2afc38e684aa2f1033387e2ed10029 "ARM: 8857/1: efi: enable CP15 DMB instructions before cleaning the cache" added some explicit handling of the CP15BEN bit in the SCTLR system register, to ensure that CP15 barrier instructions are enabled, even if we enter the decompressor via the EFI stub. However, as it turns out, there are other ways in which we may end up using CP15 barrier instructions without them being enabled. I.e., when the decompressor startup code skips the cache_on() initially, we end up calling cache_clean_flush() with the caches and MMU off, in which case the CP15BEN bit in SCTLR may not be programmed either. And in fact, cache_on() itself issues CP15 barrier instructions before actually enabling them by programming the new SCTLR value (and issuing an ISB) Since these routines are shared between v7 CPUs and older ones that implement the CPUID extension as well, using the ordinary v7 barrier instructions in this code is not possible, and so we should enable the CP15 ones explicitly before issuing them. Note that a v7 ISB is still required between programming the SCTLR register and using the CP15 barrier instructions, and we should take care to branch over it if the CP15BEN bit is already set, given that in that case, the CPU may not support it. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-01-24Merge tag 'uniphier-dt-v5.6' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into arm/dt UniPhier ARM SoC DT updates for v5.6 - Add pinmux nodes for I2C ch5, ch6 - Add reset-names to NAND controller node * tag 'uniphier-dt-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier: ARM: dts: uniphier: add reset-names to NAND controller node ARM: dts: uniphier: add pinmux nodes for I2C ch5, ch6 Link: https://lore.kernel.org/r/CAK7LNARYrzv4QU-eXxqYCcC9dziJmx9F02YNZ3mMnF47EfL3fA@mail.gmail.com Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-24Merge tag 'omap-for-fixes-whenever-signed' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Few minor fixes for omaps Looks like we have wrong default memory size for beaglebone black, it has at least 512 MB of RAM and not 256 MB. This causes an issue when booted with GRUB2 that does not seem to pass memory info to the kernel. And for am43x-epos-evm the SPI pin directions need to be configured for SPI to work. * tag 'omap-for-fixes-whenever-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: am43x-epos-evm: set data pin directions for spi0 and spi1 ARM: dts: am335x-boneblack-common: fix memory size Link: https://lore.kernel.org/r/pull-1579895109-287828@atomide.com Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-23ARM: dts: am43x-epos-evm: set data pin directions for spi0 and spi1Raag Jadav
Set d0 and d1 pin directions for spi0 and spi1 as per their pinmux. Signed-off-by: Raag Jadav <raagjadav@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-01-21Merge tag 'zynq-dt-for-v5.6-v2' of https://github.com/Xilinx/linux-xlnx into ↵Olof Johansson
arm/dt ARM: dts: zynq: DT changes for v5.6 v2 - Enable coresight topology for Zynq * tag 'zynq-dt-for-v5.6-v2' of https://github.com/Xilinx/linux-xlnx: ARM: dts: zynq: enablement of coresight topology Link: https://lore.kernel.org/r/5db334df-89b5-1d07-3884-93f77b0f4e60@monstr.eu Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-21Merge 5.5-rc7 into usb-nextGreg Kroah-Hartman
We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-20clk: ti: add clkctrl data dra7 sgxTony Lindgren
This is similar to what we have for omap5 except the gpu_cm address is different, the mux clocks have one more source option, and there's no divider clock. Note that because of the current dts node name dependency for mapping to clock domain, we must still use "gpu-clkctrl@" naming instead of generic "clock@" naming for the node. And because of this, it's probably best to apply the dts node addition together along with the other clock changes. For accessing the GPU, we also need to configure the interconnect target module for GPU similar to what we have for omap5, I'll send that change separately. Cc: Benoit Parrot <bparrot@ti.com> Cc: "H. Nikolaus Schaller" <hns@goldelico.com> Cc: Robert Nelson <robertcnelson@gmail.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Tero Kristo <t-kristo@ti.com>
2020-01-20dt-bindings: clock: Move ti-dra7-atl.h to dt-bindings/clockPeter Ujfalusi
Most of the clock related dt-binding header files are located in dt-bindings/clock folder. It would be good to keep all the similar header files at a single location. Suggested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Tero Kristo <t-kristo@ti.com>
2020-01-19Merge tag 'aspeed-5.6-devicetree' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into arm/dt ASPEED device tree updates for 5.6 - Cleanups for dtc warnings - Ethernet hardware checksum cleanups. A bug in the driver was fixed so machines don't need to specify this anymore. - Misc improvements * tag 'aspeed-5.6-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed: ARM: dts: aspeed: rainier: Add UCD90320 power sequencer ARM: dts: aspeed: rainier: Switch PSUs to unknown version ARM: dts: aspeed: Add SD card for Vesnin ARM: dts: aspeed: yamp: Delete no-hw-checksum ARM: dts: aspeed: netbmc: Delete no-hw-checksum ARM: dts: aspeed: AST2400 disables hw checksum ARM: dts: ibm-power9-dual: Add a unit address for OCC nodes ARM: dts: aspeed-g6: Cleanup watchdog unit address ARM: dts: aspeed-g5: Sort LPC child nodes by unit address ARM: dts: aspeed: Add reg hints to syscon children ARM: dts: aspeed: Cleanup lpc-ctrl and snoop regs ARM: dts: witherspoon: Cleanup gpio-keys-polled properties ARM: dts: swift: Cleanup gpio-keys-polled properties ARM: dts: fp5280g2: Cleanup gpio-keys-polled properties ARM: dts: vesnin: Add unit address for memory node ARM: dts: aspeed-g5: Use recommended generic node name for SDMC ARM: dts: aspeed-g5: Move EDAC node to APB dt-bindings: misc: Document reg for aspeed, p2a-ctrl nodes dt-bindings: pinctrl: aspeed: Add reg property as a hint Link: https://lore.kernel.org/r/CACPK8XepSy6D4CNWjSWDDK0p7Dx_rneWne4t4uyy=di5nx3zmA@mail.gmail.com Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-19Merge tag 'at91-5.6-dt-2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dt AT91 DT for 5.6 #2 - Add sam9x60 dtsi - New board sam9x60 Evaluation Kit * tag 'at91-5.6-dt-2' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: dts: at91: sam9x60: add device tree for soc and board dt-bindings: arm: add sam9x60-ek board dt-bindings: atmel-gpbr: add microchip,sam9x60-gpbr dt-bindings: atmel-smc: add microchip,sam9x60-smc dt-bindings: atmel-sysreg: add microchip,sam9x60-ddramc dt-bindings: atmel-nand: add microchip,sam9x60-pmecc dt-bindings: atmel-matrix: add microchip,sam9x60-matrix dt-bindings: at91-sama5d2_adc: add microchip,sam9x60-adc dt-bindings: atmel-isi: add microchip,sam9x60-isi dt-bindings: atmel-can: add microchip,sam9x60-can dt-bindings: at_xdmac: add microchip,sam9x60-dma dt-bindings: at_xdmac: remove wildcard Link: https://lore.kernel.org/r/20200119234707.GA90094@piout.net Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-19Merge tag 'v5.6-rockchip-dts32-2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt Removal of the simple-panel compatible and some minor additional cleanups. * tag 'v5.6-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: Kill off "simple-panel" compatibles ARM: dts: rockchip: rename dwmmc node names to mmc ARM: dts: rockchip: add reg property to brcmf sub node for rk3188-bqedison2qc Link: https://lore.kernel.org/r/3473489.DgqFdXXe5V@phil Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-20ARM: dts: aspeed: rainier: Add UCD90320 power sequencerJim Wright
Change Rainier device tree to use UCD90320 chip and only bind driver to port which excepts PMBus commands. Signed-off-by: Jim Wright <wrightj@linux.vnet.ibm.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-01-20ARM: dts: aspeed: rainier: Switch PSUs to unknown versionEddie James
Rainier can use either version of the IBM CFFPS, so don't set the version in the devicetree so the driver can detect it automatically. Signed-off-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-01-18ARM: dts: rockchip: Kill off "simple-panel" compatiblesRob Herring
"simple-panel" is a Linux driver and has never been an accepted upstream compatible string, so remove it. Cc: Heiko Stuebner <heiko@sntech.de> Cc: linux-rockchip@lists.infradead.org Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200117230851.25434-1-robh@kernel.org Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-01-18ARM: dts: rockchip: rename dwmmc node names to mmcJohan Jonker
Current dts files with 'dwmmc' nodes are manually verified. In order to automate this process rockchip-dw-mshc.txt has to be converted to yaml. In the new setup rockchip-dw-mshc.yaml will inherit properties from mmc-controller.yaml and synopsys-dw-mshc-common.yaml. 'dwmmc' will no longer be a valid name for a node, so change them all to 'mmc' Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20200115185244.18149-1-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-01-17Merge tag 'arm-soc/for-5.6/devicetree-part2' of ↵Olof Johansson
https://github.com/Broadcom/stblinux into arm/dt This pull request contains Broadcom ARM-based SoC changes for 5.6, please pull the following: - Nicolas unifies the CMA reserved region declaration between all BCM283x/BCM2711 chips in order for firmwares to easily adjust those based on the use case needs - Nicolas adds the Broadcom STB PCIe Root Complex Device Tree node for the Raspberry Pi 4. The driver will go through the PCIe maintainers pull request for 5.6. * tag 'arm-soc/for-5.6/devicetree-part2' of https://github.com/Broadcom/stblinux: ARM: dts: bcm2711: Enable PCIe controller ARM: dts: bcm283x: Unify CMA configuration Link: https://lore.kernel.org/r/20200117222705.25391-2-f.fainelli@gmail.com Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-18ARM: dts: uniphier: add reset-names to NAND controller nodeMasahiro Yamada
The Denali NAND controller IP has separate reset control for the controller core and registers. Add the reset-names, and one more phandle accordingly. This is the approved DT-binding. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-01-16Merge tag 'omap-for-v5.6/dt-part2-signed' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt More dts changes for omaps for v5.6 merge window Add basic support for first generation Amazon omap3-echo. This got applied rather late as we discussed how to deal with SoC variants with some accelerators unaccessible, and eventually ended up setting up few more SoC specific dtsi files. Eventually we'll need to also detect the disabled accelerators on driver init, but more patching is needed for that. * tag 'omap-for-v5.6/dt-part2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: Add omap3-echo ARM: dts: Add dtsi files for AM3703, AM3715 and DM3725 Link: https://lore.kernel.org/r/pull-1579200367-372444@atomide.com-4 Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-16Merge tag 'amlogic-dt' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt ARM: dts: Amlogic updates for v5.6 - add DDR clock controller - GPU OPP updates * tag 'amlogic-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: ARM: dts: meson8b: use the actual frequency for the GPU's 364MHz OPP ARM: dts: meson8: use the actual frequency for the GPU's 182.1MHz OPP ARM: dts: meson8b: fix the clock controller compatible string ARM: dts: meson8b: add the DDR clock controller ARM: dts: meson8: add the DDR clock controller ARM: dts: meson: provide the XTAL clock using a fixed-clock dt-bindings: clock: meson8b: add the clock inputs dt-bindings: clock: add the Amlogic Meson8 DDR clock controller binding Link: https://lore.kernel.org/r/7hwo9udi7m.fsf@baylibre.com Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-16Merge tag 'qcom-dts-for-5.6' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt Qualcomm ARM dts updates for v5.6 * Add SAW L2 nodes to boot secondary cpus on IPQ40xx * Fix remaining IRQ_TYPE_NONE on APQ8084 * Update tsens node to new style * Add modem remoteproc node to MSM8974 * Move ADSP SMD edge into ADSP remoteproc node for MSM8974 * Add and enable wireless communication subsystem on MSM8974 and Fairphone 2 * Add MSM8974 interconnect provider nodes * Add MSM8974 OCMEM node * tag 'qcom-dts-for-5.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: ARM: dts: qcom: Add nodes for SMP boot in IPQ40xx ARM: dts: qcom: apq8084: Remove all instances of IRQ_TYPE_NONE ARM: dts: qcom: apq8084: Change tsens definition to new style ARM: dts: msm8974: Move ADSP smd edge to ADSP PIL ARM: dts: msm8974: Add modem remoteproc node ARM: dts: msm8974-FP2: Introduce the wcnss remoteproc node ARM: dts: msm8974: Introduce the wcnss remoteproc node ARM: dts: qcom: msm8974: add interconnect nodes ARM: dts: qcom: msm8974: add ocmem node Link: https://lore.kernel.org/r/20200113204448.GE3325@yoga Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-16Merge tag 'at91-5.6-dt-1' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dt AT91 DT for 5.6 - Fix sama5d3 peripheral clock rate range - New boards: Overkiz Smartikz and Kizbox Mini, Microchip SAMA5D27 wlsom1-ek - sama5d2 sdmcc fixes * tag 'at91-5.6-dt-1' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: dts: at91: sama5d3: define clock rate range for tcb1 ARM: dts: at91: sama5d3: fix maximum peripheral clock rates ARM: dts: at91: nattis 2: remove unnecessary include ARM: dts: at91: add smartkiz support and a common kizboxmini dtsi file dt-bindings: arm: at91: Document Kizboxmini and Smartkiz boards binding ARM: dts: at91: rearrange kizbox dts using aliases nodes ARM: dts: at91: sama5d27_som1_ek: add the microchip,sdcal-inverted on sdmmc0 ARM: dts: at91: Reenable UART TX pull-ups ARM: dts: at91: sama5d2: set the sdmmc gclk frequency ARM: dts: at91: sama5d27_som1_ek: add i2c filters properties ARM: dts: at91: sama5d27_wlsom1: add SAMA5D27 wlsom1 and wlsom1-ek dt-bindings: ARM: at91: Document SAMA5D27 WLSOM1 and Evaluation Kit ARM: dts: at91: sama5d2: mark secumod as a GPIO controller ARM: dts: at91: sama5d2: disable pwm0 by default Link: https://lore.kernel.org/r/20200113155423.GA1357189@piout.net Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-16Merge tag 'sunxi-dt-for-5.6-2' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt This is our usual set of DT patches for the Allwinner SoCs. It's fairly big this time, but the highlights are: - Enable cpufreq and CPU thermal throttling on the A64 - CLK_CPUX macro usage removed (changed from first pull request) - CSI0 support on the R40 - CSI1 support on the A10 and A20 - SPI support on the R40 - PMU support on the H3, H5, H6 and R40 - MIPI-DSI support on the A64 - PWM support on the H6 - Thermal sensor on the A64, A83t, H3, H5, H6 and R40 - More DT schemas fixes and conversions - New boards: LibreComputer ALL-H5-CC H5, LibreComputer ALL-H3-IT H5, Pine64 H64 Model B, Neutis N5H3 * tag 'sunxi-dt-for-5.6-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (52 commits) arm64: dts: allwinner: a64: enable DVFS arm64: dts: allwinner: a64: add dtsi with CPU operating points arm64: dts: allwinner: a64: add cooling maps and thermal tripping points arm64: dts: allwinner: a64: add CPU clock to CPU0-3 nodes arm64: dts: allwinner: sun50i-a64: Use macros for newly exported clocks ARM: dts: sunxi: Use macros for references to CCU clocks arm64: dts: allwinner: h5: Add Libre Computer ALL-H5-CC H5 board ARM: dts: sun8i: R40: Add SPI controllers nodes and pinmuxes arm64: dts: allwinner: a64: pinebook: Fix lid wakeup ARM: dts: sun8i: r40: Add device node for CSI0 ARM: dts: sun7i: Add CSI1 controller and pinmux options ARM: dts: sun4i: Add CSI1 controller and pinmux options ARM: dts: sunxi: Add missing LVDS resets and clocks ARM: dts: sun8i: r40: Use tcon top clock index macros ARM: dts: sun8i: R40: Add PMU node ARM: dts: sun8i: R40: Upgrade GICC reg size to 8K arm64: dts: allwinner: h6: Add thermal sensor and thermal zones ARM: dts: sunxi: Add Libre Computer ALL-H3-IT H5 board arm64: dts: allwinner: a64: Add MIPI DSI pipeline arm64: dts: allwinner: a64: Add thermal sensors and thermal zones ... Link: https://lore.kernel.org/r/20200113095555.GA29848@wens.csie.org Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-16Merge tag 'imx-dt-5.6' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt i.MX device tree update for 5.6: - New board support: i.MX6SL based Tolino Shine 3 eBook reader, i.MX7ULP Embedded Artists COM Board, i.MX6Q/DL based Gateworks Ventana Boards. - A couple of series from Andrey Smirnov to enhance i.MX6 RDU2 and VF610 ZII boards. - Add revision in board compatible string for imx6sx-sdb-reva and imx7d-sdb-reva board. - A fixup on imx6sl-tolino-shine3 board to remove incorrect power supply assignment. - Set initial buck regulator modes explicitly for phycore-imx6 board, so that a wrong initial mode set by bootloader does not interfere. - Add Add LCD support for imx7d-pico board. - A couple of patches from Michael Grzeschik to enhance USB Host support on i.MX25. - A couple of patches from Michael Trimarchi to remove duplicate Ethernet PHY reset properties on imx6qdl-icore and switch to phy-handle. - A couple of changes to add extirq node support on LS1021A SoC and make use of it on the LS1021A-TSN board. - A few random device additions and improvements on various boards. * tag 'imx-dt-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (33 commits) ARM: dts: imx: Add GW5912 board support ARM: dts: imx: Add GW5913 board support ARM: dts: imx: Add GW5910 board support ARM: dts: imx: Add GW5907 board support ARM: dts: imx6ul-14x14-evk: Pass the "broken-cd" property ARM: dts: imx6sl-tolino-shine3: Remove incorrect power supply assignment ARM: dts: imx7d-pico: Add LCD support ARM: dts: imx6qdl-icore: Add fec phy-handle ARM: dts: imx6qdl-icore-1.5: Remove duplicate phy reset methods ARM: dts: imx7: Unify temp-grade and speed-grade nodes ARM: dts: imx6: phycore-som: add pmic onkey device ARM: dts: imx51-babbage: Fix the DVI output description ARM: dts: imx6qdl-apalis: mux HDMI CEC pin ARM: dts: imx6sll: add PXP module ARM: dts: colibri-imx6ull: correct wrong pinmuxing and add comments ARM: dts: vf610-zii-scu4-aib: Add node for switch watchdog ARM: dts: vf610-zii-scu4-aib: Use generic names for DT nodes ARM: dts: vf610-zii-dev-rev-b: Drop redundant I2C properties ARM: dts: phycore-imx6: set buck regulator modes explicitly ARM: dts: imx6: rdu2: Limit USBH1 to Full Speed ... Link: https://lore.kernel.org/r/20200113034006.17430-4-shawnguo@kernel.org Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-16Merge tag 'mvebu-dt-5.6-1' of git://git.infradead.org/linux-mvebu into arm/dtOlof Johansson
mvebu dt for 5.6 (part 1) - Add support for SolidRun Clearfog GTR (Armada 385 based board) - Move i2c0 to the SoliRrun Microsom dtsi (Armada 38x based) - Add EEPROM node on SoliRrun Microsom (rev 2.1) - Add EEPROM node on SoliRrun ClearFog Pro * tag 'mvebu-dt-5.6-1' of git://git.infradead.org/linux-mvebu: ARM: dts: armada-388-clearfog: add eeprom ARM: dts: armada-38x-solidrun-microsom: add eeprom ARM: armada-38x-solidrun-microsom: move i2c0 to SOM DT ARM: dts: mvebu: add support for SolidRun Clearfog GTR Link: https://lore.kernel.org/r/874kx13nvh.fsf@FE-laptop Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-16Merge tag 'tegra-for-5.6-arm-dt' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt ARM: tegra: Device tree changes for v5.6-rc1 This adds memory timings for the PAZ100 and does some minor cleanup for the external memory controller device tree node on Tegra124. * tag 'tegra-for-5.6-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: ARM: dts: tegra20: paz00: Add memory timings ARM: tegra: Rename EMC on Tegra124 ARM: tegra: Let the EMC hardware use the EMC clock Link: https://lore.kernel.org/r/20200111003553.2411874-6-thierry.reding@gmail.com Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-16ARM: dts: at91: sam9x60: add device tree for soc and boardSandeep Sheriker Mallikarjun
Add device tree files for SAM9X60 SoC and SAM9X60-EK board. Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/1579085987-13976-6-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2020-01-15ARM: dts: bcm2711: Enable PCIe controllerNicolas Saenz Julienne
This enables bcm2711's PCIe bus, which is hardwired to a VIA Technologies XHCI USB 3.0 controller. Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2020-01-15ARM: dts: bcm283x: Unify CMA configurationNicolas Saenz Julienne
With the introduction of the Raspberry Pi 4 we were forced to explicitly configure CMA's location, since arm64 defaults it into the ZONE_DMA32 memory area, which is not good enough to perform DMA operations on that device. To bypass this limitation a dedicated CMA DT node was created, explicitly indicating the acceptable memory range and size. That said, compatibility between boards is a must on the Raspberry Pi ecosystem so this creates a common CMA DT node so as for DT overlays to be able to update CMA's properties regardless of the board being used. Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Phil Elwell <phil@raspberrypi.org> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2020-01-13ARM: dts: Add omap3-echoAndré Hentschel
This is the first generation Amazon Echo from 2016. Audio support is not yet implemented. Signed-off-by: André Hentschel <nerv@dawncrow.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-01-13ARM: dts: Add dtsi files for AM3703, AM3715 and DM3725André Hentschel
DM3730 is considered as omap36xx.dtsi, while the rest has: DM3730 | DM3725 | AM3715 | AM3703 IVA X | X | | SGX X | | X | Where X is "supported" Signed-off-by: André Hentschel <nerv@dawncrow.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-01-13ARM: dts: am335x-boneblack-common: fix memory sizeMatwey V. Kornilov
BeagleBone Black series is equipped with 512MB RAM whereas only 256MB is included from am335x-bone-common.dtsi This leads to an issue with unusual setups when devicetree is loaded by GRUB2 directly. Signed-off-by: Matwey V. Kornilov <matwey@sai.msu.ru> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-01-13ARM: dts: rockchip: add reg property to brcmf sub node for rk3188-bqedison2qcJohan Jonker
An experimental test with the command below gives this error: rk3188-bqedison2qc.dt.yaml: dwmmc@10218000: wifi@1: 'reg' is a required property So fix this by adding a reg property to the brcmf sub node. Also add #address-cells and #size-cells to prevent more warnings. make ARCH=arm dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20200110134420.11280-1-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-01-12ARM: dts: imx: Add GW5912 board supportRobert Jones
The Gateworks GW5912 is an IMX6 SoC based single board computer with: - IMX6Q or IMX6DL - 32bit DDR3 DRAM - GbE RJ45 front-panel - 4x miniPCIe socket with PCI Gen2, USB2 - 1x miniPCIe socket with PCI Gen2, USB2, mSATA - 1x miniPCIe socket with PCI Gen2, USB2, mezzanine - 10V to 60V DC input barrel jack - 3axis accelerometer (lis2de12) - GPS (ublox ZOE-M8Q) - bi-color front-panel LED - 256MB NAND boot device - nanoSIM/microSD socket (with UHS-I support) - user pushbutton - Gateworks System Controller (hwmon, pushbutton controller, EEPROM) - CAN Bus transceiver (mcp2562) - RS232 transceiver (1x UART with flow-control or 2x UART (build option) - off-board SPI connector (1x chip-select) Signed-off-by: Robert Jones <rjones@gateworks.com> Reviewed-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-01-12ARM: dts: imx: Add GW5913 board supportRobert Jones
The Gateworks GW5913 is an IMX6 SoC based single board computer with: - IMX6Q or IMX6DL - 32bit DDR3 DRAM - FEC GbE RJ45 front-panel - 1x miniPCIe socket with PCI Gen2, USB2 - 1x miniPCIe socket with PCI Gen2, USB2, nanoSIM - 6V to 60V DC input connector - GPS (ublox ZOE-M8Q) - bi-color front-panel LED - 256MB NAND boot device - nanoSIM socket - user pushbutton - Gateworks System Controller (hwmon, pushbutton controller, EEPROM) Signed-off-by: Robert Jones <rjones@gateworks.com> Reviewed-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-01-12ARM: dts: imx: Add GW5910 board supportTim Harvey
The Gateworks GW5910 is an IMX6 SoC based single board computer with: - IMX6Q or IMX6DL - 32bit DDR3 DRAM - FEC GbE RJ45 front-panel - 1x miniPCIe socket with PCI Gen2, USB2 - 1x miniPCIe socket with PCI Gen2, USB2, nanoSIM - 5V to 60V DC input barrel jack - 3axis accelerometer (lis2de12) - GPS (ublox ZOE-M8Q) - bi-color front-panel LED - 256MB NAND boot device - microSD socket (with UHS-I support) - user pushbutton - Gateworks System Controller (hwmon, pushbutton controller, EEPROM) - Dual-Band Wireless MCU (CC1352, UART/I2S interrconnect to IMX6) - WiFi/Bluetooth/BLE module (Sterling-LSW, SDIO/UART interconnect to IMX6) - RS232 transceiver (1x UART with flow-control or 2x UART (build option) - off-board SPI connector (1x chip-select) Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Robert Jones <rjones@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-01-12ARM: dts: imx: Add GW5907 board supportRobert Jones
The Gateworks GW5907 is an IMX6 SoC based single board computer with: - IMX6Q or IMX6DL - 32bit DDR3 DRAM - FEC GbE Phy - bi-color front-panel LED - 256MB NAND boot device - Gateworks System Controller (hwmon, pushbutton controller, EEPROM) - Digital IO expander (pca9555) - Joystick 12bit adc (ads1015) Signed-off-by: Robert Jones <rjones@gateworks.com> Reviewed-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-01-11Merge tag 'samsung-dt-5.6' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt Samsung DTS ARM changes for v5.6 1. Couple ARM and wcore bus regulators on Exynos542x so higher frequencies could be used with dynamic voltage and frequency scaling. Enable this higher frequencies. 2. Correct the polarity of USB3503 hub GPIOs. 3. Adjust the bus frequencies (scaled with devfreq framework) on Exynos5422 Odroid boards to match values possible to obtain from root PLLs. 4. Add display to Tiny4412 board. 5. Cleanups and minor improvements. * tag 'samsung-dt-5.6' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: dts: exynos: Enable FIMD node and add proper panel node to Tiny4412 ARM: dts: samsung: Rename Samsung and Exynos to lowercase ARM: dts: exynos: Adjust bus related OPPs to the values correct for Exynos5422 Odroids ARM: dts: exynos: Move Exynos5420 bus related OPPs to the Odroid boards DTS ARM: dts: exynos: Correct USB3503 GPIOs polarity ARM: dts: exynos: Add missing CPU frequencies for Exynos5422/5800 ARM: dts: exynos: Add initial data for coupled regulators for Exynos5422/5800 ARM: dts: exynos: Remove syscon compatible from chipid node on Exynos5 Link: https://lore.kernel.org/r/20200110172334.4767-3-krzk@kernel.org Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-10Merge tag 'v5.6-rockchip-dts64-1' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt New boards are the Radxa Rock Pi N10 using the VMARC SOM and Dalang carrier board, separate versions for the two rockpro64 hardware revisions which switched a pin between revisions. The rockpro64 also got bluetooth support now. The px30 got a lot of attention with dsi, gpu and thermal support. Similarly the rk3399-roc-pc board also got attention with mtd flash, sdr104 mode, hdmi sound, gpu and a lot of other smaller improvements. Other than that there is a new gpu-cooling device for rk3399 a cpu idle-state for rk3328 and more small improvements across a number of boards. * tag 'v5.6-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (37 commits) arm64: dts: rockchip: Enable mp8859 regulator on rk3399-roc-pc arm64: dts: rockchip: rk3399-hugsun-x99: remove supports-sd and supports-emmc options arm64: dts: rockchip: rk3399-firefly: remove num-slots from &sdio0 node arm64: dts: rockchip: Add PX30 LVDS arm64: dts: rockchip: add dsi controller for px30 arm64: dts: rockchip: Add PX30 DSI DPHY arm64: dts: rockchip: Add RK3328 idle state arm64: dts: rockchip: remove identical &uart0 node from rk3368-lion-haikou arm64: dts: rockchip: Add Radxa Rock Pi N10 initial support ARM: dts: rockchip: Add Radxa Dalang Carrier board arm64: dts: rockchip: Add VMARC RK3399Pro SOM initial support dt-bindings: arm: rockchip: Add Rock Pi N10 binding arm64: dts: rockchip: hook up bluetooth at uart0 on rockpro64 arm64: dts: rockchip: enable wifi module at sdio0 on rockpro64 arm64: dts: rockchip: split rk3399-rockpro64 for v2 and v2.1 boards arm64: dts: rockchip: enable the gpu on px30-evb arm64: dts: rockchip: add the gpu for px30 dt-bindings: gpu: mali-bifrost: Add Rockchip PX30 arm64: dts: rockchip: Add GPU cooling device for RK3399 arm64: dts: rockchip: Add regulators for PCIe for Radxa Rock Pi 4 board ... Link: https://lore.kernel.org/r/5115625.yBEeHQkg2z@phil Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-10Merge tag 'v5.6-rockchip-dts32-1' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt Pin-name corrections for Veyron-Fievel, bluetooth for a number of veyron boards and additional operating points for rk3288-tinker. * tag 'v5.6-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: Use ABI name for recovery mode pin on veyron fievel/tiger ARM: dts: rockchip: Use ABI name for write protect pin on veyron fievel/tiger ARM: dts: rockchip: Add missing cpu operating points for rk3288-tinker ARM: dts: rockchip: Add brcm bluetooth for rk3288-veyron Link: https://lore.kernel.org/r/8215452.dU6eVM2tAM@phil Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-10Merge tag 'stm32-dt-for-v5.6-1' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt STM32 DT updates for v5.6, round 1 Highlights: ---------- MPU part: -Add PWM support on DK2 board. -Add counter support to STM32 timers. -Add support of SDMMC 2&3 instances based on "arm,pl18x". SDMMC2 is connected to eMMC on ED1 board. SDMMC3 is connected to the GPIO extension connector on EV1 & DKx boards. -Add ADC support on ED1 board. -Update devicetree files split to better fit to STM32MP15 SOC & boards diversity. -Fix issues seen during YAML validation. -Enable Ethernet (MAC) TX clock gating during low-power mode. -Enable USB OTG HS support on DKx boards. -Enable USB Host EHCI on DKx boards. MCU part: -Fix issues seen during YAML validation. * tag 'stm32-dt-for-v5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (37 commits) ARM: dts: stm32: Add power-supply for RGB panel on stm32429i-eval ARM: dts: stm32: Add power-supply for DSI panel on stm32f469-disco ARM: dts: stm32: change nvmem node name on stm32mp1 ARM: dts: stm32: change nvmem node name on stm32f429 ARM: dts: stm32: update mlahb node according to the bindings on stm32mp15 ARM: dts: stm32: fix dma controller node name on stm32mp157c ARM: dts: stm32: fix dma controller node name on stm32f743 ARM: dts: stm32: fix dma controller node name on stm32f746 ARM: dts: stm32: add phy-names to usbotg_hs on stm32mp157c-ev1 ARM: dts: stm32: enable USB OTG HS on stm32mp15 DKx boards ARM: dts: stm32: enable USB Host (USBH) EHCI controller on stm32mp15 DKx ARM: dts: stm32: enable USBPHYC on stm32mp15 DKx boards ARM: dts: stm32: remove useless clock-names from RTC node on stm32f746 ARM: dts: stm32: remove useless clock-names from RTC node on stm32f429 ARM: dts: stm32: Enable MAC TX clock gating during TX low-power mode on stm32mp15 ARM: dts: stm32: adjust slew rate for Ethernet on stm32mp15 ARM: dts: stm32: remove syscfg clock on stm32mp15 ethernet ARM: dts: stm32: remove "@" and "_" from stm32f7 pinmux groups ARM: dts: stm32: remove "@" and "_" from stm32f4 pinmux groups ARM: dts: stm32: Adapt STM32MP157C ED1 board to STM32 DT diversity ... Link: https://lore.kernel.org/r/39df1dee-3c9f-cd35-bc55-a71223e07100@st.com Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-10Merge tag 'arm-soc/for-5.6/devicetree' of ↵Olof Johansson
https://github.com/Broadcom/stblinux into arm/dt This pull request contains Broadcom ARM-based SoCs Device Tree changes for 5.6, please pull the following: - Stephan adds support for the HWRNG on 2711 (Raspberry Pi 4) which is different than the previous Pi chips - Florian switches the BCM956265HR board to use the hardware I2C controllers for interfacing with the SFPs * tag 'arm-soc/for-5.6/devicetree' of https://github.com/Broadcom/stblinux: ARM: dts: bcm2711: Enable HWRNG support ARM: dts: