diff options
Diffstat (limited to 'tools')
94 files changed, 5414 insertions, 214 deletions
diff --git a/tools/arch/x86/include/uapi/asm/kvm.h b/tools/arch/x86/include/uapi/asm/kvm.h index dabfcf7c3941..7a0e64ccd6ff 100644 --- a/tools/arch/x86/include/uapi/asm/kvm.h +++ b/tools/arch/x86/include/uapi/asm/kvm.h @@ -381,6 +381,7 @@ struct kvm_sync_regs { #define KVM_X86_QUIRK_LINT0_REENABLED (1 << 0) #define KVM_X86_QUIRK_CD_NW_CLEARED (1 << 1) #define KVM_X86_QUIRK_LAPIC_MMIO_HOLE (1 << 2) +#define KVM_X86_QUIRK_OUT_7E_INC_RIP (1 << 3) #define KVM_STATE_NESTED_GUEST_MODE 0x00000001 #define KVM_STATE_NESTED_RUN_PENDING 0x00000002 diff --git a/tools/arch/x86/include/uapi/asm/perf_regs.h b/tools/arch/x86/include/uapi/asm/perf_regs.h index f3329cabce5c..ac67bbea10ca 100644 --- a/tools/arch/x86/include/uapi/asm/perf_regs.h +++ b/tools/arch/x86/include/uapi/asm/perf_regs.h @@ -27,8 +27,29 @@ enum perf_event_x86_regs { PERF_REG_X86_R13, PERF_REG_X86_R14, PERF_REG_X86_R15, - + /* These are the limits for the GPRs. */ PERF_REG_X86_32_MAX = PERF_REG_X86_GS + 1, PERF_REG_X86_64_MAX = PERF_REG_X86_R15 + 1, + + /* These all need two bits set because they are 128bit */ + PERF_REG_X86_XMM0 = 32, + PERF_REG_X86_XMM1 = 34, + PERF_REG_X86_XMM2 = 36, + PERF_REG_X86_XMM3 = 38, + PERF_REG_X86_XMM4 = 40, + PERF_REG_X86_XMM5 = 42, + PERF_REG_X86_XMM6 = 44, + PERF_REG_X86_XMM7 = 46, + PERF_REG_X86_XMM8 = 48, + PERF_REG_X86_XMM9 = 50, + PERF_REG_X86_XMM10 = 52, + PERF_REG_X86_XMM11 = 54, + PERF_REG_X86_XMM12 = 56, + PERF_REG_X86_XMM13 = 58, + PERF_REG_X86_XMM14 = 60, + PERF_REG_X86_XMM15 = 62, + + /* These include both GPRs and XMMX registers */ + PERF_REG_X86_XMM_MAX = PERF_REG_X86_XMM15 + 2, }; #endif /* _ASM_X86_PERF_REGS_H */ diff --git a/tools/arch/x86/lib/memcpy_64.S b/tools/arch/x86/lib/memcpy_64.S index 3b24dc05251c..9d05572370ed 100644 --- a/tools/arch/x86/lib/memcpy_64.S +++ b/tools/arch/x86/lib/memcpy_64.S @@ -257,6 +257,7 @@ ENTRY(__memcpy_mcsafe) /* Copy successful. Return zero */ .L_done_memcpy_trap: xorl %eax, %eax +.L_done: ret ENDPROC(__memcpy_mcsafe) EXPORT_SYMBOL_GPL(__memcpy_mcsafe) @@ -273,7 +274,7 @@ EXPORT_SYMBOL_GPL(__memcpy_mcsafe) addl %edx, %ecx .E_trailing_bytes: mov %ecx, %eax - ret + jmp .L_done /* * For write fault handling, given the destination is unaligned, diff --git a/tools/lib/traceevent/Documentation/Makefile b/tools/lib/traceevent/Documentation/Makefile new file mode 100644 index 000000000000..aa72ab96c3c1 --- /dev/null +++ b/tools/lib/traceevent/Documentation/Makefile @@ -0,0 +1,207 @@ +include ../../../scripts/Makefile.include +include ../../../scripts/utilities.mak + +# This Makefile and manpage XSL files were taken from tools/perf/Documentation +# and modified for libtraceevent. + +MAN3_TXT= \ + $(wildcard libtraceevent-*.txt) \ + libtraceevent.txt + +MAN_TXT = $(MAN3_TXT) +_MAN_XML=$(patsubst %.txt,%.xml,$(MAN_TXT)) +_MAN_HTML=$(patsubst %.txt,%.html,$(MAN_TXT)) +_DOC_MAN3=$(patsubst %.txt,%.3,$(MAN3_TXT)) + +MAN_XML=$(addprefix $(OUTPUT),$(_MAN_XML)) +MAN_HTML=$(addprefix $(OUTPUT),$(_MAN_HTML)) +DOC_MAN3=$(addprefix $(OUTPUT),$(_DOC_MAN3)) + +# Make the path relative to DESTDIR, not prefix +ifndef DESTDIR +prefix?=$(HOME) +endif +bindir?=$(prefix)/bin +htmldir?=$(prefix)/share/doc/libtraceevent-doc +pdfdir?=$(prefix)/share/doc/libtraceevent-doc +mandir?=$(prefix)/share/man +man3dir=$(mandir)/man3 + +ASCIIDOC=asciidoc +ASCIIDOC_EXTRA = --unsafe -f asciidoc.conf +ASCIIDOC_HTML = xhtml11 +MANPAGE_XSL = manpage-normal.xsl +XMLTO_EXTRA = +INSTALL?=install +RM ?= rm -f + +ifdef USE_ASCIIDOCTOR +ASCIIDOC = asciidoctor +ASCIIDOC_EXTRA = -a compat-mode +ASCIIDOC_EXTRA += -I. -rasciidoctor-extensions +ASCIIDOC_EXTRA += -a mansource="libtraceevent" -a manmanual="libtraceevent Manual" +ASCIIDOC_HTML = xhtml5 +endif + +XMLTO=xmlto + +_tmp_tool_path := $(call get-executable,$(ASCIIDOC)) +ifeq ($(_tmp_tool_path),) + missing_tools = $(ASCIIDOC) +endif + +ifndef USE_ASCIIDOCTOR +_tmp_tool_path := $(call get-executable,$(XMLTO)) +ifeq ($(_tmp_tool_path),) + missing_tools += $(XMLTO) +endif +endif + +# +# For asciidoc ... +# -7.1.2, no extra settings are needed. +# 8.0-, set ASCIIDOC8. +# + +# +# For docbook-xsl ... +# -1.68.1, set ASCIIDOC_NO_ROFF? (based on changelog from 1.73.0) +# 1.69.0, no extra settings are needed? +# 1.69.1-1.71.0, set DOCBOOK_SUPPRESS_SP? +# 1.71.1, no extra settings are needed? +# 1.72.0, set DOCBOOK_XSL_172. +# 1.73.0-, set ASCIIDOC_NO_ROFF +# + +# +# If you had been using DOCBOOK_XSL_172 in an attempt to get rid +# of 'the ".ft C" problem' in your generated manpages, and you +# instead ended up with weird characters around callouts, try +# using ASCIIDOC_NO_ROFF instead (it works fine with ASCIIDOC8). +# + +ifdef ASCIIDOC8 +ASCIIDOC_EXTRA += -a asciidoc7compatible +endif +ifdef DOCBOOK_XSL_172 +ASCIIDOC_EXTRA += -a libtraceevent-asciidoc-no-roff +MANPAGE_XSL = manpage-1.72.xsl +else + ifdef ASCIIDOC_NO_ROFF + # docbook-xsl after 1.72 needs the regular XSL, but will not + # pass-thru raw roff codes from asciidoc.conf, so turn them off. + ASCIIDOC_EXTRA += -a libtraceevent-asciidoc-no-roff + endif +endif +ifdef MAN_BOLD_LITERAL +XMLTO_EXTRA += -m manpage-bold-literal.xsl +endif +ifdef DOCBOOK_SUPPRESS_SP +XMLTO_EXTRA += -m manpage-suppress-sp.xsl +endif + +SHELL_PATH ?= $(SHELL) +# Shell quote; +SHELL_PATH_SQ = $(subst ','\'',$(SHELL_PATH)) + +DESTDIR ?= +DESTDIR_SQ = '$(subst ','\'',$(DESTDIR))' + +export DESTDIR DESTDIR_SQ + +# +# Please note that there is a minor bug in asciidoc. +# The version after 6.0.3 _will_ include the patch found here: +# http://marc.theaimsgroup.com/?l=libtraceevent&m=111558757202243&w=2 +# +# Until that version is released you may have to apply the patch +# yourself - yes, all 6 characters of it! +# +QUIET_SUBDIR0 = +$(MAKE) -C # space to separate -C and subdir +QUIET_SUBDIR1 = + +ifneq ($(findstring $(MAKEFLAGS),w),w) +PRINT_DIR = --no-print-directory +else # "make -w" +NO_SUBDIR = : +endif + +ifneq ($(findstring $(MAKEFLAGS),s),s) +ifneq ($(V),1) + QUIET_ASCIIDOC = @echo ' ASCIIDOC '$@; + QUIET_XMLTO = @echo ' XMLTO '$@; + QUIET_SUBDIR0 = +@subdir= + QUIET_SUBDIR1 = ;$(NO_SUBDIR) \ + echo ' SUBDIR ' $$subdir; \ + $(MAKE) $(PRINT_DIR) -C $$subdir + export V +endif +endif + +all: html man + +man: man3 +man3: $(DOC_MAN3) + +html: $(MAN_HTML) + +$(MAN_HTML) $(DOC_MAN3): asciidoc.conf + +install: install-man + +check-man-tools: +ifdef missing_tools + $(error "You need to install $(missing_tools) for man pages") +endif + +do-install-man: man + $(call QUIET_INSTALL, Documentation-man) \ + $(INSTALL) -d -m 755 $(DESTDIR)$(man3dir); \ + $(INSTALL) -m 644 $(DOC_MAN3) $(DESTDIR)$(man3dir); + +install-man: check-man-tools man do-install-man + +uninstall: uninstall-man + +uninstall-man: + $(call QUIET_UNINST, Documentation-man) \ + $(Q)$(RM) $(addprefix $(DESTDIR)$(man3dir)/,$(DOC_MAN3)) + + +ifdef missing_tools + DO_INSTALL_MAN = $(warning Please install $(missing_tools) to have the man pages installed) +else + DO_INSTALL_MAN = do-install-man +endif + +CLEAN_FILES = \ + $(MAN_XML) $(addsuffix +,$(MAN_XML)) \ + $(MAN_HTML) $(addsuffix +,$(MAN_HTML)) \ + $(DOC_MAN3) *.3 + +clean: + $(call QUIET_CLEAN, Documentation) $(RM) $(CLEAN_FILES) + +ifdef USE_ASCIIDOCTOR +$(OUTPUT)%.3 : $(OUTPUT)%.txt + $(QUIET_ASCIIDOC)$(RM) $@+ $@ && \ + $(ASCIIDOC) -b manpage -d manpage \ + $(ASCIIDOC_EXTRA) -alibtraceevent_version=$(EVENT_PARSE_VERSION) -o $@+ $< && \ + mv $@+ $@ +endif + +$(OUTPUT)%.3 : $(OUTPUT)%.xml + $(QUIET_XMLTO)$(RM) $@ && \ + $(XMLTO) -o $(OUTPUT). -m $(MANPAGE_XSL) $(XMLTO_EXTRA) man $< + +$(OUTPUT)%.xml : %.txt + $(QUIET_ASCIIDOC)$(RM) $@+ $@ && \ + $(ASCIIDOC) -b docbook -d manpage \ + $(ASCIIDOC_EXTRA) -alibtraceevent_version=$(EVENT_PARSE_VERSION) -o $@+ $< && \ + mv $@+ $@ + +$(MAN_HTML): $(OUTPUT)%.html : %.txt + $(QUIET_ASCIIDOC)$(RM) $@+ $@ && \ + $(ASCIIDOC) -b $(ASCIIDOC_HTML) -d manpage \ + $(ASCIIDOC_EXTRA) -aperf_version=$(EVENT_PARSE_VERSION) -o $@+ $< && \ + mv $@+ $@ diff --git a/tools/lib/traceevent/Documentation/asciidoc.conf b/tools/lib/traceevent/Documentation/asciidoc.conf new file mode 100644 index 000000000000..07595717f06e --- /dev/null +++ b/tools/lib/traceevent/Documentation/asciidoc.conf @@ -0,0 +1,120 @@ +## linktep: macro +# +# Usage: linktep:command[manpage-section] +# +# Note, {0} is the manpage section, while {target} is the command. +# +# Show TEP link as: <command>(<section>); if section is defined, else just show +# the command. + +[macros] +(?su)[\\]?(?P<name>linktep):(?P<target>\S*?)\[(?P<attrlist>.*?)\]= + +[attributes] +asterisk=* +plus=+ +caret=^ +startsb=[ +endsb=] +tilde=~ + +ifdef::backend-docbook[] +[linktep-inlinemacro] +{0%{target}} +{0#<citerefentry>} +{0#<refentrytitle>{target}</refentrytitle><manvolnum>{0}</manvolnum>} +{0#</citerefentry>} +endif::backend-docbook[] + +ifdef::backend-docbook[] +ifndef::tep-asciidoc-no-roff[] +# "unbreak" docbook-xsl v1.68 for manpages. v1.69 works with or without this. +# v1.72 breaks with this because it replaces dots not in roff requests. +[listingblock] +<example><title>{title}</title> +<literallayout> +ifdef::doctype-manpage[] + .ft C +endif::doctype-manpage[] +| +ifdef::doctype-manpage[] + .ft +endif::doctype-manpage[] +</literallayout> +{title#}</example> +endif::tep-asciidoc-no-roff[] + +ifdef::tep-asciidoc-no-roff[] +ifdef::doctype-manpage[] +# The following two small workarounds insert a simple paragraph after screen +[listingblock] +<example><title>{title}</title> +<literallayout> +| +</literallayout><simpara></simpara> +{title#}</example> + +[verseblock] +<formalpara{id? id="{id}"}><title>{title}</title><para> +{title%}<literallayout{id? id="{id}"}> +{title#}<literallayout> +| +</literallayout> +{title#}</para></formalpara> +{title%}<simpara></simpara> +endif::doctype-manpage[] +endif::tep-asciidoc-no-roff[] +endif::backend-docbook[] + +ifdef::doctype-manpage[] +ifdef::backend-docbook[] +[header] +template::[header-declarations] +<refentry> +<refmeta> +<refentrytitle>{mantitle}</refentrytitle> +<manvolnum>{manvolnum}</manvolnum> +<refmiscinfo class="source">libtraceevent</refmiscinfo> +<refmiscinfo class="version">{libtraceevent_version}</refmiscinfo> +<refmiscinfo class="manual">libtraceevent Manual</refmiscinfo> +</refmeta> +<refna |