summaryrefslogtreecommitdiffstats
path: root/tools/testing/ktest/ktest.pl
diff options
context:
space:
mode:
Diffstat (limited to 'tools/testing/ktest/ktest.pl')
-rwxr-xr-xtools/testing/ktest/ktest.pl208
1 files changed, 128 insertions, 80 deletions
diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl
index 5ba9ad4248d7..f360cbdbf00f 100755
--- a/tools/testing/ktest/ktest.pl
+++ b/tools/testing/ktest/ktest.pl
@@ -58,6 +58,9 @@ my %default = (
"SSH_USER" => "root",
"BUILD_TARGET" => "arch/x86/boot/bzImage",
"TARGET_IMAGE" => "/boot/vmlinuz-test",
+
+ "LOG_FILE" => undef,
+ "IGNORE_UNUSED" => 0,
);
my $ktest_config;
@@ -176,6 +179,92 @@ my %force_config;
# do not force reboots on config problems
my $no_reboot = 1;
+my %option_map = (
+ "MACHINE" => \$machine,
+ "SSH_USER" => \$ssh_user,
+ "TMP_DIR" => \$tmpdir,
+ "OUTPUT_DIR" => \$outputdir,
+ "BUILD_DIR" => \$builddir,
+ "TEST_TYPE" => \$test_type,
+ "BUILD_TYPE" => \$build_type,
+ "BUILD_OPTIONS" => \$build_options,
+ "PRE_BUILD" => \$pre_build,
+ "POST_BUILD" => \$post_build,
+ "PRE_BUILD_DIE" => \$pre_build_die,
+ "POST_BUILD_DIE" => \$post_build_die,
+ "POWER_CYCLE" => \$power_cycle,
+ "REBOOT" => \$reboot,
+ "BUILD_NOCLEAN" => \$noclean,
+ "MIN_CONFIG" => \$minconfig,
+ "OUTPUT_MIN_CONFIG" => \$output_minconfig,
+ "START_MIN_CONFIG" => \$start_minconfig,
+ "IGNORE_CONFIG" => \$ignore_config,
+ "TEST" => \$run_test,
+ "ADD_CONFIG" => \$addconfig,
+ "REBOOT_TYPE" => \$reboot_type,
+ "GRUB_MENU" => \$grub_menu,
+ "POST_INSTALL" => \$post_install,
+ "NO_INSTALL" => \$no_install,
+ "REBOOT_SCRIPT" => \$reboot_script,
+ "REBOOT_ON_ERROR" => \$reboot_on_error,
+ "SWITCH_TO_GOOD" => \$switch_to_good,
+ "SWITCH_TO_TEST" => \$switch_to_test,
+ "POWEROFF_ON_ERROR" => \$poweroff_on_error,
+ "DIE_ON_FAILURE" => \$die_on_failure,
+ "POWER_OFF" => \$power_off,
+ "POWERCYCLE_AFTER_REBOOT" => \$powercycle_after_reboot,
+ "POWEROFF_AFTER_HALT" => \$poweroff_after_halt,
+ "SLEEP_TIME" => \$sleep_time,
+ "BISECT_SLEEP_TIME" => \$bisect_sleep_time,
+ "PATCHCHECK_SLEEP_TIME" => \$patchcheck_sleep_time,
+ "IGNORE_WARNINGS" => \$ignore_warnings,
+ "BISECT_MANUAL" => \$bisect_manual,
+ "BISECT_SKIP" => \$bisect_skip,
+ "CONFIG_BISECT_GOOD" => \$config_bisect_good,
+ "BISECT_RET_GOOD" => \$bisect_ret_good,
+ "BISECT_RET_BAD" => \$bisect_ret_bad,
+ "BISECT_RET_SKIP" => \$bisect_ret_skip,
+ "BISECT_RET_ABORT" => \$bisect_ret_abort,
+ "BISECT_RET_DEFAULT" => \$bisect_ret_default,
+ "STORE_FAILURES" => \$store_failures,
+ "STORE_SUCCESSES" => \$store_successes,
+ "TEST_NAME" => \$test_name,
+ "TIMEOUT" => \$timeout,
+ "BOOTED_TIMEOUT" => \$booted_timeout,
+ "CONSOLE" => \$console,
+ "DETECT_TRIPLE_FAULT" => \$detect_triplefault,
+ "SUCCESS_LINE" => \$success_line,
+ "REBOOT_SUCCESS_LINE" => \$reboot_success_line,
+ "STOP_AFTER_SUCCESS" => \$stop_after_success,
+ "STOP_AFTER_FAILURE" => \$stop_after_failure,
+ "STOP_TEST_AFTER" => \$stop_test_after,
+ "BUILD_TARGET" => \$build_target,
+ "SSH_EXEC" => \$ssh_exec,
+ "SCP_TO_TARGET" => \$scp_to_target,
+ "CHECKOUT" => \$checkout,
+ "TARGET_IMAGE" => \$target_image,
+ "LOCALVERSION" => \$localversion,
+
+ "BISECT_GOOD" => \$bisect_good,
+ "BISECT_BAD" => \$bisect_bad,
+ "BISECT_TYPE" => \$bisect_type,
+ "BISECT_START" => \$bisect_start,
+ "BISECT_REPLAY" => \$bisect_replay,
+ "BISECT_FILES" => \$bisect_files,
+ "BISECT_REVERSE" => \$bisect_reverse,
+ "BISECT_CHECK" => \$bisect_check,
+
+ "CONFIG_BISECT" => \$config_bisect,
+ "CONFIG_BISECT_TYPE" => \$config_bisect_type,
+
+ "PATCHCHECK_TYPE" => \$patchcheck_type,
+ "PATCHCHECK_START" => \$patchcheck_start,
+ "PATCHCHECK_END" => \$patchcheck_end,
+);
+
+# Options may be used by other options, record them.
+my %used_options;
+
# default variables that can be used
chomp ($variable{"PWD"} = `pwd`);
@@ -427,6 +516,10 @@ sub process_variables {
} else {
# put back the origin piece.
$retval = "$retval\$\{$var\}";
+ # This could be an option that is used later, save
+ # it so we don't warn if this option is not one of
+ # ktests options.
+ $used_options{$var} = 1;
}
$value = $end;
}
@@ -850,6 +943,37 @@ sub read_config {
$opt{$default} = $default{$default};
}
}
+
+ if ($opt{"IGNORE_UNUSED"} == 1) {
+ return;
+ }
+
+ my %not_used;
+
+ # check if there are any stragglers (typos?)
+ foreach my $option (keys %opt) {
+ my $op = $option;
+ # remove per test labels.
+ $op =~ s/\[.*\]//;
+ if (!exists($option_map{$op}) &&
+ !exists($default{$op}) &&
+ !exists($used_options{$op})) {
+ $not_used{$op} = 1;
+ }
+ }
+
+ if (%not_used) {
+ my $s = "s are";
+ $s = " is" if (keys %not_used == 1);
+ print "The following option$s not used; could be a typo:\n";
+ foreach my $option (keys %not_used) {
+ print "$option\n";
+ }
+ print "Set IGRNORE_UNUSED = 1 to have ktest ignore unused variables\n";
+ if (!read_yn "Do you want to continue?") {
+ exit -1;
+ }
+ }
}
sub __eval_option {
@@ -3321,86 +3445,10 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) {
my $makecmd = set_test_option("MAKE_CMD", $i);
- $machine = set_test_option("MACHINE", $i);
- $ssh_user = set_test_option("SSH_USER", $i);
- $tmpdir = set_test_option("TMP_DIR", $i);
- $outputdir = set_test_option("OUTPUT_DIR", $i);
- $builddir = set_test_option("BUILD_DIR", $i);
- $test_type = set_test_option("TEST_TYPE", $i);
- $build_type = set_test_option("BUILD_TYPE", $i);
- $build_options = set_test_option("BUILD_OPTIONS", $i);
- $pre_build = set_test_option("PRE_BUILD", $i);
- $post_build = set_test_option("POST_BUILD", $i);
- $pre_build_die = set_test_option("PRE_BUILD_DIE", $i);
- $post_build_die = set_test_option("POST_BUILD_DIE", $i);
- $power_cycle = set_test_option("POWER_CYCLE", $i);
- $reboot = set_test_option("REBOOT", $i);
- $noclean = set_test_option("BUILD_NOCLEAN", $i);
- $minconfig = set_test_option("MIN_CONFIG", $i);
- $output_minconfig = set_test_option("OUTPUT_MIN_CONFIG", $i);
- $start_minconfig = set_test_option("START_MIN_CONFIG", $i);
- $ignore_config = set_test_option("IGNORE_CONFIG", $i);
- $run_test = set_test_option("TEST", $i);
- $addconfig = set_test_option("ADD_CONFIG", $i);
- $reboot_type = set_test_option("REBOOT_TYPE", $i);
- $grub_menu = set_test_option("GRUB_MENU", $i);
- $post_install = set_test_option("POST_INSTALL", $i);
- $no_install = set_test_option("NO_INSTALL", $i);
- $reboot_script = set_test_option("REBOOT_SCRIPT", $i);
- $reboot_on_error = set_test_option("REBOOT_ON_ERROR", $i);
- $switch_to_good = set_test_option("SWITCH_TO_GOOD", $i);
- $switch_to_test = set_test_option("SWITCH_TO_TEST", $i);
- $poweroff_on_error = set_test_option("POWEROFF_ON_ERROR", $i);
- $die_on_failure = set_test_option("DIE_ON_FAILURE", $i);
- $power_off = set_test_option("POWER_OFF", $i);
- $powercycle_after_reboot = set_test_option("POWERCYCLE_AFTER_REBOOT", $i);
- $poweroff_after_halt = set_test_option("POWEROFF_AFTER_HALT", $i);
- $sleep_time = set_test_option("SLEEP_TIME", $i);
- $bisect_sleep_time = set_test_option("BISECT_SLEEP_TIME", $i);
- $patchcheck_sleep_time = set_test_option("PATCHCHECK_SLEEP_TIME", $i);
- $ignore_warnings = set_test_option("IGNORE_WARNINGS", $i);
- $bisect_manual = set_test_option("BISECT_MANUAL", $i);
- $bisect_skip = set_test_option("BISECT_SKIP", $i);
- $config_bisect_good = set_test_option("CONFIG_BISECT_GOOD", $i);
- $bisect_ret_good = set_test_option("BISECT_RET_GOOD", $i);
- $bisect_ret_bad = set_test_option("BISECT_RET_BAD", $i);
- $bisect_ret_skip = set_test_option("BISECT_RET_SKIP", $i);
- $bisect_ret_abort = set_test_option("BISECT_RET_ABORT", $i);
- $bisect_ret_default = set_test_option("BISECT_RET_DEFAULT", $i);
- $store_failures = set_test_option("STORE_FAILURES", $i);
- $store_successes = set_test_option("STORE_SUCCESSES", $i);
- $test_name = set_test_option("TEST_NAME", $i);
- $timeout = set_test_option("TIMEOUT", $i);
- $booted_timeout = set_test_option("BOOTED_TIMEOUT", $i);
- $console = set_test_option("CONSOLE", $i);
- $detect_triplefault = set_test_option("DETECT_TRIPLE_FAULT", $i);
- $success_line = set_test_option("SUCCESS_LINE", $i);
- $reboot_success_line = set_test_option("REBOOT_SUCCESS_LINE", $i);
- $stop_after_success = set_test_option("STOP_AFTER_SUCCESS", $i);
- $stop_after_failure = set_test_option("STOP_AFTER_FAILURE", $i);
- $stop_test_after = set_test_option("STOP_TEST_AFTER", $i);
- $build_target = set_test_option("BUILD_TARGET", $i);
- $ssh_exec = set_test_option("SSH_EXEC", $i);
- $scp_to_target = set_test_option("SCP_TO_TARGET", $i);
- $checkout = set_test_option("CHECKOUT", $i);
- $target_image = set_test_option("TARGET_IMAGE", $i);
- $localversion = set_test_option("LOCALVERSION", $i);
-
- $bisect_good = set_test_option("BISECT_GOOD", $i);
- $bisect_bad = set_test_option("BISECT_BAD", $i);
- $bisect_type = set_test_option("BISECT_TYPE", $i);
- $bisect_start = set_test_option("BISECT_START", $i);
- $bisect_replay = set_test_option("BISECT_REPLAY", $i);
- $bisect_files = set_test_option("BISECT_FILES", $i);
- $bisect_reverse = set_test_option("BISECT_REVERSE", $i);
- $bisect_check = set_test_option("BISECT_CHECK", $i);
-
- $config_bisect = set_test_option("CONFIG_BISECT", $i);
- $config_bisect_type = set_test_option("CONFIG_BISECT_TYPE", $i);
-
- $patchcheck_type = set_test_option("PATCHCHECK_TYPE", $i);
- $patchcheck_start = set_test_option("PATCHCHECK_START", $i);
- $patchcheck_end = set_test_option("PATCHCHECK_END", $i);
+ # Load all the options into their mapped variable names
+ foreach my $opt (keys %option_map) {
+ ${$option_map{$opt}} = set_test_option($opt, $i);
+ }
$start_minconfig_defined = 1;