summaryrefslogtreecommitdiffstats
path: root/tools/memory-model
diff options
context:
space:
mode:
Diffstat (limited to 'tools/memory-model')
-rw-r--r--tools/memory-model/Documentation/explanation.txt186
-rw-r--r--tools/memory-model/linux-kernel.cat8
-rw-r--r--tools/memory-model/litmus-tests/ISA2+pooncelock+pooncelock+pombonce.litmus7
3 files changed, 150 insertions, 51 deletions
diff --git a/tools/memory-model/Documentation/explanation.txt b/tools/memory-model/Documentation/explanation.txt
index 0cbd1ef8f86d..35bff92cc773 100644
--- a/tools/memory-model/Documentation/explanation.txt
+++ b/tools/memory-model/Documentation/explanation.txt
@@ -28,7 +28,8 @@ Explanation of the Linux-Kernel Memory Consistency Model
20. THE HAPPENS-BEFORE RELATION: hb
21. THE PROPAGATES-BEFORE RELATION: pb
22. RCU RELATIONS: rcu-link, gp, rscs, rcu-fence, and rb
- 23. ODDS AND ENDS
+ 23. LOCKING
+ 24. ODDS AND ENDS
@@ -1067,28 +1068,6 @@ allowing out-of-order writes like this to occur. The model avoided
violating the write-write coherence rule by requiring the CPU not to
send the W write to the memory subsystem at all!)
-There is one last example of preserved program order in the LKMM: when
-a load-acquire reads from an earlier store-release. For example:
-
- smp_store_release(&x, 123);
- r1 = smp_load_acquire(&x);
-
-If the smp_load_acquire() ends up obtaining the 123 value that was
-stored by the smp_store_release(), the LKMM says that the load must be
-executed after the store; the store cannot be forwarded to the load.
-This requirement does not arise from the operational model, but it
-yields correct predictions on all architectures supported by the Linux
-kernel, although for differing reasons.
-
-On some architectures, including x86 and ARMv8, it is true that the
-store cannot be forwarded to the load. On others, including PowerPC
-and ARMv7, smp_store_release() generates object code that starts with
-a fence and smp_load_acquire() generates object code that ends with a
-fence. The upshot is that even though the store may be forwarded to
-the load, it is still true that any instruction preceding the store
-will be executed before the load or any following instructions, and
-the store will be executed before any instruction following the load.
-
AND THEN THERE WAS ALPHA
------------------------
@@ -1766,6 +1745,147 @@ before it does, and the critical section in P2 both starts after P1's
grace period does and ends after it does.
+LOCKING
+-------
+
+The LKMM includes locking. In fact, there is special code for locking
+in the formal model, added in order to make tools run faster.
+However, this special code is intended to be more or less equivalent
+to concepts we have already covered. A spinlock_t variable is treated
+the same as an int, and spin_lock(&s) is treated almost the same as:
+
+ while (cmpxchg_acquire(&s, 0, 1) != 0)
+ cpu_relax();
+
+This waits until s is equal to 0 and then atomically sets it to 1,
+and the read part of the cmpxchg operation acts as an acquire fence.
+An alternate way to express the same thing would be:
+
+ r = xchg_acquire(&s, 1);
+
+along with a requirement that at the end, r = 0. Similarly,
+spin_trylock(&s) is treated almost the same as:
+
+ return !cmpxchg_acquire(&s, 0, 1);
+
+which atomically sets s to 1 if it is currently equal to 0 and returns
+true if it succeeds (the read part of the cmpxchg operation acts as an
+acquire fence only if the operation is successful). spin_unlock(&s)
+is treated almost the same as:
+
+ smp_store_release(&s, 0);
+
+The "almost" qualifiers above need some explanation. In the LKMM, the
+store-release in a spin_unlock() and the load-acquire which forms the
+first half of the atomic rmw update in a spin_lock() or a successful
+spin_trylock() -- we can call these things lock-releases and
+lock-acquires -- have two properties beyond those of ordinary releases
+and acquires.
+
+First, when a lock-acquire reads from a lock-release, the LKMM
+requires that every instruction po-before the lock-release must
+execute before any instruction po-after the lock-acquire. This would
+naturally hold if the release and acquire operations were on different
+CPUs, but the LKMM says it holds even when they are on the same CPU.
+For example:
+
+ int x, y;
+ spinlock_t s;
+
+ P0()
+ {
+ int r1, r2;
+
+ spin_lock(&s);
+ r1 = READ_ONCE(x);
+ spin_unlock(&s);
+ spin_lock(&s);
+ r2 = READ_ONCE(y);
+ spin_unlock(&s);
+ }
+
+ P1()
+ {
+ WRITE_ONCE(y, 1);
+ smp_wmb();
+ WRITE_ONCE(x, 1);
+ }
+
+Here the second spin_lock() reads from the first spin_unlock(), and
+therefore the load of x must execute before the load of y. Thus we
+cannot have r1 = 1 and r2 = 0 at the end (this is an instance of the
+MP pattern).
+
+This requirement does not apply to ordinary release and acquire
+fences, only to lock-related operations. For instance, suppose P0()
+in the example had been written as:
+
+ P0()
+ {
+ int r1, r2, r3;
+
+ r1 = READ_ONCE(x);
+ smp_store_release(&s, 1);
+ r3 = smp_load_acquire(&s);
+ r2 = READ_ONCE(y);
+ }
+
+Then the CPU would be allowed to forward the s = 1 value from the
+smp_store_release() to the smp_load_acquire(), executing the
+instructions in the following order:
+
+ r3 = smp_load_acquire(&s); // Obtains r3 = 1
+ r2 = READ_ONCE(y);
+ r1 = READ_ONCE(x);
+ smp_store_release(&s, 1); // Value is forwarded
+
+and thus it could load y before x, obtaining r2 = 0 and r1 = 1.
+
+Second, when a lock-acquire reads from a lock-release, and some other
+stores W and W' occur po-before the lock-release and po-after the
+lock-acquire respectively, the LKMM requires that W must propagate to
+each CPU before W' does. For example, consider:
+
+ int x, y;
+ spinlock_t x;
+
+ P0()
+ {
+ spin_lock(&s);
+ WRITE_ONCE(x, 1);
+ spin_unlock(&s);
+ }
+
+ P1()
+ {
+ int r1;
+
+ spin_lock(&s);
+ r1 = READ_ONCE(x);
+ WRITE_ONCE(y, 1);
+ spin_unlock(&s);
+ }
+
+ P2()
+ {
+ int r2, r3;
+
+ r2 = READ_ONCE(y);
+ smp_rmb();
+ r3 = READ_ONCE(x);
+ }
+
+If r1 = 1 at the end then the spin_lock() in P1 must have read from
+the spin_unlock() in P0. Hence the store to x must propagate to P2
+before the store to y does, so we cannot have r2 = 1 and r3 = 0.
+
+These two special requirements for lock-release and lock-acquire do
+not arise from the operational model. Nevertheless, kernel developers
+have come to expect and rely on them because they do hold on all
+architectures supported by the Linux kernel, albeit for various
+differing reasons.
+
+
ODDS AND ENDS
-------------
@@ -1831,26 +1951,6 @@ they behave as follows:
events and the events preceding them against all po-later
events.
-The LKMM includes locking. In fact, there is special code for locking
-in the formal model, added in order to make tools run faster.
-However, this special code is intended to be exactly equivalent to
-concepts we have already covered. A spinlock_t variable is treated
-the same as an int, and spin_lock(&s) is treated the same as:
-
- while (cmpxchg_acquire(&s, 0, 1) != 0)
- cpu_relax();
-
-which waits until s is equal to 0 and then atomically sets it to 1,
-and where the read part of the atomic update is also an acquire fence.
-An alternate way to express the same thing would be:
-
- r = xchg_acquire(&s, 1);
-
-along with a requirement that at the end, r = 0. spin_unlock(&s) is
-treated the same as:
-
- smp_store_release(&s, 0);
-
Interestingly, RCU and locking each introduce the possibility of
deadlock. When faced with code sequences such as:
diff --git a/tools/memory-model/linux-kernel.cat b/tools/memory-model/linux-kernel.cat
index 59b5cbe6b624..882fc33274ac 100644
--- a/tools/memory-model/linux-kernel.cat
+++ b/tools/memory-model/linux-kernel.cat
@@ -38,7 +38,7 @@ let strong-fence = mb | gp
(* Release Acquire *)
let acq-po = [Acquire] ; po ; [M]
let po-rel = [M] ; po ; [Release]
-let rfi-rel-acq = [Release] ; rfi ; [Acquire]
+let po-unlock-rf-lock-po = po ; [UL] ; rf ; [LKR] ; po
(**********************************)
(* Fundamental coherence ordering *)
@@ -60,13 +60,13 @@ let dep = addr | data
let rwdep = (dep | ctrl) ; [W]
let overwrite = co | fr
let to-w = rwdep | (overwrite & int)
-let to-r = addr | (dep ; rfi) | rfi-rel-acq
+let to-r = addr | (dep ; rfi)
let fence = strong-fence | wmb | po-rel | rmb | acq-po
-let ppo = to-r | to-w | fence
+let ppo = to-r | to-w | fence | (po-unlock-rf-lock-po & int)
(* Propagation: Ordering from release operations and strong fences. *)
let A-cumul(r) = rfe? ; r
-let cumul-fence = A-cumul(strong-fence | po-rel) | wmb
+let cumul-fence = A-cumul(strong-fence | po-rel) | wmb | po-unlock-rf-lock-po
let prop = (overwrite & ext)? ; cumul-fence* ; rfe?
(*
diff --git a/tools/memory-model/litmus-tests/ISA2+pooncelock+pooncelock+pombonce.litmus b/tools/memory-model/litmus-tests/ISA2+pooncelock+pooncelock+pombonce.litmus
index 0f749e419b34..094d58df7789 100644
--- a/tools/memory-model/litmus-tests/ISA2+pooncelock+pooncelock+pombonce.litmus
+++ b/tools/memory-model/litmus-tests/ISA2+pooncelock+pooncelock+pombonce.litmus
@@ -1,11 +1,10 @@
C ISA2+pooncelock+pooncelock+pombonce
(*
- * Result: Sometimes
+ * Result: Never
*
- * This test shows that the ordering provided by a lock-protected S
- * litmus test (P0() and P1()) are not visible to external process P2().
- * This is likely to change soon.
+ * This test shows that write-write ordering provided by locks
+ * (in P0() and P1()) is visible to external process P2().
*)
{}