diff options
Diffstat (limited to 'sound')
-rw-r--r-- | sound/usb/6fire/Makefile | 3 | ||||
-rw-r--r-- | sound/usb/6fire/chip.c | 232 | ||||
-rw-r--r-- | sound/usb/6fire/chip.h | 32 | ||||
-rw-r--r-- | sound/usb/6fire/comm.c | 176 | ||||
-rw-r--r-- | sound/usb/6fire/comm.h | 44 | ||||
-rw-r--r-- | sound/usb/6fire/common.h | 30 | ||||
-rw-r--r-- | sound/usb/6fire/control.c | 275 | ||||
-rw-r--r-- | sound/usb/6fire/control.h | 37 | ||||
-rw-r--r-- | sound/usb/6fire/firmware.c | 426 | ||||
-rw-r--r-- | sound/usb/6fire/firmware.h | 27 | ||||
-rw-r--r-- | sound/usb/6fire/midi.c | 203 | ||||
-rw-r--r-- | sound/usb/6fire/midi.h | 46 | ||||
-rw-r--r-- | sound/usb/6fire/pcm.c | 689 | ||||
-rw-r--r-- | sound/usb/6fire/pcm.h | 76 | ||||
-rw-r--r-- | sound/usb/Kconfig | 16 | ||||
-rw-r--r-- | sound/usb/Makefile | 2 |
16 files changed, 2313 insertions, 1 deletions
diff --git a/sound/usb/6fire/Makefile b/sound/usb/6fire/Makefile new file mode 100644 index 000000000000..dfce6ec53513 --- /dev/null +++ b/sound/usb/6fire/Makefile @@ -0,0 +1,3 @@ +snd-usb-6fire-objs += chip.o comm.o midi.o control.o firmware.o pcm.o +obj-$(CONFIG_SND_USB_6FIRE) += snd-usb-6fire.o + diff --git a/sound/usb/6fire/chip.c b/sound/usb/6fire/chip.c new file mode 100644 index 000000000000..c7dca7b0b9fe --- /dev/null +++ b/sound/usb/6fire/chip.c @@ -0,0 +1,232 @@ +/* + * Linux driver for TerraTec DMX 6Fire USB + * + * Main routines and module definitions. + * + * Author: Torsten Schenk <torsten.schenk@zoho.com> + * Created: Jan 01, 2011 + * Version: 0.3.0 + * Copyright: (C) Torsten Schenk + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include "chip.h" +#include "firmware.h" +#include "pcm.h" +#include "control.h" +#include "comm.h" +#include "midi.h" + +#include <linux/moduleparam.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/gfp.h> +#include <sound/initval.h> + +MODULE_AUTHOR("Torsten Schenk <torsten.schenk@zoho.com>"); +MODULE_DESCRIPTION("TerraTec DMX 6Fire USB audio driver, version 0.3.0"); +MODULE_LICENSE("GPL v2"); +MODULE_SUPPORTED_DEVICE("{{TerraTec, DMX 6Fire USB}}"); + +static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-max */ +static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; /* Id for card */ +static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP; /* Enable card */ +static struct sfire_chip *chips[SNDRV_CARDS] = SNDRV_DEFAULT_PTR; +static struct usb_device *devices[SNDRV_CARDS] = SNDRV_DEFAULT_PTR; + +module_param_array(index, int, NULL, 0444); +MODULE_PARM_DESC(index, "Index value for the 6fire sound device"); +module_param_array(id, charp, NULL, 0444); +MODULE_PARM_DESC(id, "ID string for the 6fire sound device."); +module_param_array(enable, bool, NULL, 0444); +MODULE_PARM_DESC(enable, "Enable the 6fire sound device."); + +static DEFINE_MUTEX(register_mutex); + +static void usb6fire_chip_abort(struct sfire_chip *chip) +{ + if (chip) { + if (chip->pcm) + usb6fire_pcm_abort(chip); + if (chip->midi) + usb6fire_midi_abort(chip); + if (chip->comm) + usb6fire_comm_abort(chip); + if (chip->control) + usb6fire_control_abort(chip); + if (chip->card) { + snd_card_disconnect(chip->card); + snd_card_free_when_closed(chip->card); + chip->card = NULL; + } + } +} + +static void usb6fire_chip_destroy(struct sfire_chip *chip) +{ + if (chip) { + if (chip->pcm) + usb6fire_pcm_destroy(chip); + if (chip->midi) + usb6fire_midi_destroy(chip); + if (chip->comm) + usb6fire_comm_destroy(chip); + if (chip->control) + usb6fire_control_destroy(chip); + if (chip->card) + snd_card_free(chip->card); + } +} + +static int __devinit usb6fire_chip_probe(struct usb_interface *intf, + const struct usb_device_id *usb_id) +{ + int ret; + int i; + struct sfire_chip *chip = NULL; + struct usb_device *device = interface_to_usbdev(intf); + int regidx = -1; /* index in module parameter array */ + struct snd_card *card = NULL; + + /* look if we already serve this card and return if so */ + mutex_lock(®ister_mutex); + for (i = 0; i < SNDRV_CARDS; i++) { + if (devices[i] == device) { + if (chips[i]) + chips[i]->intf_count++; + usb_set_intfdata(intf, chips[i]); + mutex_unlock(®ister_mutex); + return 0; + } else if (regidx < 0) + regidx = i; + } + if (regidx < 0) { + mutex_unlock(®ister_mutex); + snd_printk(KERN_ERR PREFIX "too many cards registered.\n"); + return -ENODEV; + } + devices[regidx] = device; + mutex_unlock(®ister_mutex); + + /* check, if firmware is present on device, upload it if not */ + ret = usb6fire_fw_init(intf); + if (ret < 0) + return ret; + else if (ret == FW_NOT_READY) /* firmware update performed */ + return 0; + + /* if we are here, card can be registered in alsa. */ + if (usb_set_interface(device, 0, 0) != 0) { + snd_printk(KERN_ERR PREFIX "can't set first interface.\n"); + return -EIO; + } + ret = snd_card_create(index[regidx], id[regidx], THIS_MODULE, + sizeof(struct sfire_chip), &card); + if (ret < 0) { + snd_printk(KERN_ERR PREFIX "cannot create alsa card.\n"); + return ret; + } + strcpy(card->driver, "6FireUSB"); + strcpy(card->shortname, "TerraTec DMX6FireUSB"); + sprintf(card->longname, "%s at %d:%d", card->shortname, + device->bus->busnum, device->devnum); + snd_card_set_dev(card, &intf->dev); + + chip = card->private_data; + chips[regidx] = chip; + chip->dev = device; + chip->regidx = regidx; + chip->intf_count = 1; + chip->card = card; + + ret = usb6fire_comm_init(chip); + if (ret < 0) { + usb6fire_chip_destroy(chip); + return ret; + } + + ret = usb6fire_midi_init(chip); + if (ret < 0) { + usb6fire_chip_destroy(chip); + return ret; + } + + ret = usb6fire_pcm_init(chip); + if (ret < 0) { + usb6fire_chip_destroy(chip); + return ret; + } + + ret = usb6fire_control_init(chip); + if (ret < 0) { + usb6fire_chip_destroy(chip); + return ret; + } + + ret = snd_card_register(card); + if (ret < 0) { + snd_printk(KERN_ERR PREFIX "cannot register card."); + usb6fire_chip_destroy(chip); + return ret; + } + usb_set_intfdata(intf, chip); + return 0; +} + +static void usb6fire_chip_disconnect(struct usb_interface *intf) +{ + struct sfire_chip *chip; + struct snd_card *card; + + chip = usb_get_intfdata(intf); + if (chip) { /* if !chip, fw upload has been performed */ + card = chip->card; + chip->intf_count--; + if (!chip->intf_count) { + mutex_lock(®ister_mutex); + devices[chip->regidx] = NULL; + chips[chip->regidx] = NULL; + mutex_unlock(®ister_mutex); + + chip->shutdown = true; + usb6fire_chip_abort(chip); + usb6fire_chip_destroy(chip); + } + } +} + +static struct usb_device_id device_table[] = { + { + .match_flags = USB_DEVICE_ID_MATCH_DEVICE, + .idVendor = 0x0ccd, + .idProduct = 0x0080 + }, + {} +}; + +MODULE_DEVICE_TABLE(usb, device_table); + +static struct usb_driver driver = { + .name = "snd-usb-6fire", + .probe = usb6fire_chip_probe, + .disconnect = usb6fire_chip_disconnect, + .id_table = device_table, +}; + +static int __init usb6fire_chip_init(void) +{ + return usb_register(&driver); +} + +static void __exit usb6fire_chip_cleanup(void) +{ + usb_deregister(&driver); +} + +module_init(usb6fire_chip_init); +module_exit(usb6fire_chip_cleanup); diff --git a/sound/usb/6fire/chip.h b/sound/usb/6fire/chip.h new file mode 100644 index 000000000000..d11e5cb520f0 --- /dev/null +++ b/sound/usb/6fire/chip.h @@ -0,0 +1,32 @@ +/* + * Linux driver for TerraTec DMX 6Fire USB + * + * Author: Torsten Schenk <torsten.schenk@zoho.com> + * Created: Jan 01, 2011 + * Version: 0.3.0 + * Copyright: (C) Torsten Schenk + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#ifndef USB6FIRE_CHIP_H +#define USB6FIRE_CHIP_H + +#include "common.h" + +struct sfire_chip { + struct usb_device *dev; + struct snd_card *card; + int intf_count; /* number of registered interfaces */ + int regidx; /* index in module parameter arrays */ + bool shutdown; + + struct midi_runtime *midi; + struct pcm_runtime *pcm; + struct control_runtime *control; + struct comm_runtime *comm; +}; +#endif /* USB6FIRE_CHIP_H */ + diff --git a/sound/usb/6fire/comm.c b/sound/usb/6fire/comm.c new file mode 100644 index 000000000000..c994daa57af2 --- /dev/null +++ b/sound/usb/6fire/comm.c @@ -0,0 +1,176 @@ +/* + * Linux driver for TerraTec DMX 6Fire USB + * + * Device communications + * + * Author: Torsten Schenk <torsten.schenk@zoho.com> + * Created: Jan 01, 2011 + * Version: 0.3.0 + * Copyright: (C) Torsten Schenk + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include "comm.h" +#include "chip.h" +#include "midi.h" + +enum { + COMM_EP = 1, + COMM_FPGA_EP = 2 +}; + +static void usb6fire_comm_init_urb(struct comm_runtime *rt, struct urb *urb, + u8 *buffer, void *context, void(*handler)(struct urb *urb)) +{ + usb_init_urb(urb); + urb->transfer_buffer = buffer; + urb->pipe = usb_sndintpipe(rt->chip->dev, COMM_EP); + urb->complete = handler; + urb->context = context; + urb->interval = 1; + urb->dev = rt->chip->dev; +} + +static void usb6fire_comm_receiver_handler(struct urb *urb) +{ + struct comm_runtime *rt = urb->context; + struct midi_runtime *midi_rt = rt->chip->midi; + + if (!urb->status) { + if (rt->receiver_buffer[0] == 0x10) /* midi in event */ + if (midi_rt) + midi_rt->in_received(midi_rt, + rt->receiver_buffer + 2, + rt->receiver_buffer[1]); + } + + if (!rt->chip->shutdown) { + urb->status = 0; + urb->actual_length = 0; + if (usb_submit_urb(urb, GFP_ATOMIC) < 0) + snd_printk(KERN_WARNING PREFIX + "comm data receiver aborted.\n"); + } +} + +static void usb6fire_comm_init_buffer(u8 *buffer, u8 id, u8 request, + u8 reg, u8 vl, u8 vh) +{ + buffer[0] = 0x01; + buffer[2] = request; + buffer[3] = id; + switch (request) { + case 0x02: + buffer[1] = 0x05; /* length (starting at buffer[2]) */ + buffer[4] = reg; + buffer[5] = vl; + buffer[6] = vh; + break; + + case 0x12: + buffer[1] = 0x0b; /* length (starting at buffer[2]) */ + buffer[4] = 0x00; + buffer[5] = 0x18; + buffer[6] = 0x05; + buffer[7] = 0x00; + buffer[8] = 0x01; + buffer[9] = 0x00; + buffer[10] = 0x9e; + buffer[11] = reg; + buffer[12] = vl; + break; + + case 0x20: + case 0x21: + case 0x22: + buffer[1] = 0x04; + buffer[4] = reg; + buffer[5] = vl; + break; + } +} + +static int usb6fire_comm_send_buffer(u8 *buffer, struct usb_device *dev) +{ + int ret; + int actual_len; + + ret = usb_interrupt_msg(dev, usb_sndintpipe(dev, COMM_EP), + buffer, buffer[1] + 2, &actual_len, HZ); + if (ret < 0) + return ret; + else if (actual_len != buffer[1] + 2) + return -EIO; + return 0; +} + +static int usb6fire_comm_write8(struct comm_runtime *rt, u8 request, + u8 reg, u8 value) +{ + u8 buffer[13]; /* 13: maximum length of message */ + + usb6fire_comm_init_buffer(buffer, 0x00, request, reg, value, 0x00); + return usb6fire_comm_send_buffer(buffer, rt->chip->dev); +} + +static int usb6fire_comm_write16(struct comm_runtime *rt, u8 request, + u8 reg, u8 vl, u8 vh) +{ + u8 buffer[13]; /* 13: maximum length of message */ + + usb6fire_comm_init_buffer(buffer, 0x00, request, reg, vl, vh); + return usb6fire_comm_send_buffer(buffer, rt->chip->dev); +} + +int __devinit usb6fire_comm_init(struct sfire_chip *chip) +{ + struct comm_runtime *rt = kzalloc(sizeof(struct comm_runtime), + GFP_KERNEL); + struct urb *urb = &rt->receiver; + int ret; + + if (!rt) + return -ENOMEM; + + rt->serial = 1; + rt->chip = chip; + usb_init_urb(urb); + rt->init_urb = usb6fire_comm_init_urb; + rt->write8 = usb6fire_comm_write8; + rt->write16 = usb6fire_comm_write16; + + /* submit an urb that receives communication data from device */ + urb->transfer_buffer = rt->receiver_buffer; + urb->transfer_buffer_length = COMM_RECEIVER_BUFSIZE; + urb->pipe = usb_rcvintpipe(chip->dev, COMM_EP); + urb->dev = chip->dev; + urb->complete = usb6fire_comm_receiver_handler; + urb->context = rt; + urb->interval = 1; + ret = usb_submit_urb(urb, GFP_KERNEL); + if (ret < 0) { + kfree(rt); + snd_printk(KERN_ERR PREFIX "cannot create comm data receiver."); + return ret; + } + chip->comm = rt; + return 0; +} + +void usb6fire_comm_abort(struct sfire_chip *chip) +{ + struct comm_runtime *rt = chip->comm; + + if (rt) + usb_poison_urb(&rt->receiver); +} + +void usb6fire_comm_destroy(struct sfire_chip *chip) +{ + kfree(chip->comm); + chip->comm = NULL; +} diff --git a/sound/usb/6fire/comm.h b/sound/usb/6fire/comm.h new file mode 100644 index 000000000000..edc5dc84b888 --- /dev/null +++ b/sound/usb/6fire/comm.h @@ -0,0 +1,44 @@ +/* + * Linux driver for TerraTec DMX 6Fire USB + * + * Author: Torsten Schenk <torsten.schenk@zoho.com> + * Created: Jan 01, 2011 + * Version: 0.3.0 + * Copyright: (C) Torsten Schenk + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#ifndef USB6FIRE_COMM_H +#define USB6FIRE_COMM_H + +#include "common.h" + +enum /* settings for comm */ +{ + COMM_RECEIVER_BUFSIZE = 64, +}; + +struct comm_runtime { + struct sfire_chip *chip; + + struct urb receiver; + u8 receiver_buffer[COMM_RECEIVER_BUFSIZE]; + + u8 serial; /* urb serial */ + + void (*init_urb)(struct comm_runtime *rt, struct urb *urb, u8 *buffer, + void *context, void(*handler)(struct urb *urb)); + /* writes control data to the device */ + int (*write8)(struct comm_runtime *rt, u8 request, u8 reg, u8 value); + int (*write16)(struct comm_runtime *rt, u8 request, u8 reg, + u8 vh, u8 vl); +}; + +int __devinit usb6fire_comm_init(struct sfire_chip *chip); +void usb6fire_comm_abort(struct sfire_chip *chip); +void usb6fire_comm_destroy(struct sfire_chip *chip); +#endif /* USB6FIRE_COMM_H */ + diff --git a/sound/usb/6fire/common.h b/sound/usb/6fire/common.h new file mode 100644 index 000000000000..7dbeb4a37831 --- /dev/null +++ b/sound/usb/6fire/common.h @@ -0,0 +1,30 @@ +/* + * Linux driver for TerraTec DMX 6Fire USB + * + * Author: Torsten Schenk <torsten.schenk@zoho.com> + * Created: Jan 01, 2011 + * Version: 0.3.0 + * Copyright: (C) Torsten Schenk + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef USB6FIRE_COMMON_H +#define USB6FIRE_COMMON_H + +#include <linux/slab.h> +#include <linux/usb.h> +#include <sound/core.h> + +#define PREFIX "6fire: " + +struct sfire_chip; +struct midi_runtime; +struct pcm_runtime; +struct control_runtime; +struct comm_runtime; +#endif /* USB6FIRE_COMMON_H */ + diff --git a/sound/usb/6fire/control.c b/sound/usb/6fire/control.c new file mode 100644 index 000000000000..248463511186 --- /dev/null +++ b/sound/usb/6fire/control.c @@ -0,0 +1,275 @@ +/* + * Linux driver for TerraTec DMX 6Fire USB + * + * Mixer control + * + * Author: Torsten Schenk <torsten.schenk@zoho.com> + * Created: Jan 01, 2011 + * Version: 0.3.0 + * Copyright: (C) Torsten Schenk + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/interrupt.h> +#include <sound/control.h> + +#include "control.h" +#include "comm.h" +#include "chip.h" + +static char *opt_coax_texts[2] = { "Optical", "Coax" }; +static char *line_phono_texts[2] = { "Line", "Phono" }; + +/* + * calculated with $value\[i\] = 128 \cdot sqrt[3]{\frac{i}{128}}$ + * this is done because the linear values cause rapid degredation + * of volume in the uppermost region. + */ +static const u8 log_volume_table[128] = { + 0x00, 0x19, 0x20, 0x24, 0x28, 0x2b, 0x2e, 0x30, 0x32, 0x34, + 0x36, 0x38, 0x3a, 0x3b, 0x3d, 0x3e, 0x40, 0x41, 0x42, 0x43, + 0x44, 0x46, 0x47, 0x48, 0x49, 0x4a, 0x4b, 0x4c, 0x4d, 0x4e, + 0x4e, 0x4f, 0x50, 0x51, 0x52, 0x53, 0x53, 0x54, 0x55, 0x56, + 0x56, 0x57, 0x58, 0x58, 0x59, 0x5a, 0x5b, 0x5b, 0x5c, 0x5c, + 0x5d, 0x5e, 0x5e, 0x5f, 0x60, 0x60, 0x61, 0x61, 0x62, 0x62, + 0x63, 0x63, 0x64, 0x65, 0x65, 0x66, 0x66, 0x67, 0x67, 0x68, + 0x68, 0x69, 0x69, 0x6a, 0x6a, 0x6b, 0x6b, 0x6c, 0x6c, 0x6c, + 0x6d, 0x6d, 0x6e, 0x6e, 0x6f, 0x6f, 0x70, 0x70, 0x70, 0x71, + 0x71, 0x72, 0x72, 0x73, 0x73, 0x73, 0x74, 0x74, 0x75, 0x75, + 0x75, 0x76, 0x76, 0x77, 0x77, 0x77, 0x78, 0x78, 0x78, 0x79, + 0x79, 0x7a, 0x7a, 0x7a, 0x7b, 0x7b, 0x7b, 0x7c, 0x7c, 0x7c, + 0x7d, 0x7d, 0x7d, 0x7e, 0x7e, 0x7e, 0x7f, 0x7f }; + +/* + * data that needs to be sent to device. sets up card internal stuff. + * values dumped from windows driver and filtered by trial'n'error. + */ +static const struct { + u8 type; + u8 reg; + u8 value; +} +init_data[] = { + { 0x22, 0x00, 0x00 }, { 0x20, 0x00, 0x08 }, { 0x22, 0x01, 0x01 }, + { 0x20, 0x01, 0x08 }, { 0x22, 0x02, 0x00 }, { 0x20, 0x02, 0x08 }, + { 0x22, 0x03, 0x00 }, { 0x20, 0x03, 0x08 }, { 0x22, 0x04, 0x00 }, + { 0x20, 0x04, 0x08 }, { 0x22, 0x05, 0x01 }, { 0x20, 0x05, 0x08 }, + { 0x22, 0x04, 0x01 }, { 0x12, 0x04, 0x00 }, { 0x12, 0x05, 0x00 }, + { 0x12, 0x0d, 0x78 }, { 0x12, 0x21, 0x82 }, { 0x12, 0x22, 0x80 }, + { 0x12, 0x23, 0x00 }, { 0x12, 0x06, 0x02 }, { 0x12, 0x03, 0x00 }, + { 0x12, 0x02, 0x00 }, { 0x22, 0x03, 0x01 }, + { 0 } /* TERMINATING ENTRY */ +}; + +static void usb6fire_control_master_vol_update(struct control_runtime *rt) +{ + struct comm_runtime *comm_rt = rt->chip->comm; + if (comm_rt) { + /* set volume */ + comm_rt->write8(comm_rt, 0x12, 0x0f, 0x7f - + log_volume_table[rt->master_vol]); + /* unmute */ + comm_rt->write8(comm_rt, 0x12, 0x0e, 0x00); + } +} + +static void usb6fire_control_line_phono_update(struct control_runtime *rt) +{ + struct comm_runtime *comm_rt = rt->chip->comm; + if (comm_rt) { + comm_rt->write8(comm_rt, 0x22, 0x02, rt->line_phono_switch); + comm_rt->write8(comm_rt, 0x21, 0x02, rt->line_phono_switch); + } +} + +static void usb6fire_control_opt_coax_update(struct control_runtime *rt) +{ + struct comm_runtime *comm_rt = rt->chip->comm; + if (comm_rt) { + comm_rt->write8(comm_rt, 0x22, 0x00, rt->opt_coax_switch); + comm_rt->write8(comm_rt, 0x21, 0x00, rt->opt_coax_switch); + } +} + +static int usb6fire_control_master_vol_info(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; + uinfo->count = 1; + uinfo->value.integer.min = 0; + uinfo->value.integer.max = 127; + return 0; +} + +static int usb6fire_control_master_vol_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct control_runtime *rt = snd_kcontrol_chip(kcontrol); + int changed = 0; + if (rt->master_vol != ucontrol->value.integer.value[0]) { + rt->master_vol = ucontrol->value.integer.value[0]; + usb6fire_control_master_vol_update(rt); + changed = 1; + } + return changed; +} + +static int usb6fire_control_master_vol_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct control_runtime *rt = snd_kcontrol_chip(kcontrol); + ucontrol->value.integer.value[0] = rt->master_vol; + return 0; +} + +static int usb6fire_control_line_phono_info(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; + uinfo->count = 1; + uinfo->value.enumerated.items = 2; + if (uinfo->value.enumerated.item > 1) + uinfo->value.enumerated.item = 1; + strcpy(uinfo->value.enumerated.name, + line_phono_texts[uinfo->value.enumerated.item]); + return 0; +} + +static int usb6fire_control_line_phono_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct control_runtime *rt = snd_kcontrol_chip(kcontrol); + int changed = 0; + if (rt->line_phono_switch != ucontrol->value.integer.value[0]) { + rt->line_phono_switch = ucontrol->value.integer.value[0]; + usb6fire_control_line_phono_update(rt); + changed = 1; + } + return changed; +} + +static int usb6fire_control_line_phono_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct control_runtime *rt = snd_kcontrol_chip(kcontrol); + ucontrol->value.integer.value[0] = rt->line_phono_switch; + return 0; +} + +static int usb6fire_control_opt_coax_info(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; + uinfo->count = 1; + uinfo->value.enumerated.items = 2; + if (uinfo->value.enumerated.item > 1) + uinfo->value.enumerated.item = 1; + strcpy(uinfo->value.enumerated.name, + opt_coax_texts[uinfo->value.enumerated.item]); + return 0; +} + +static int usb6fire_control_opt_coax_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct control_runtime *rt = snd_kcontrol_chip(kcontrol); + int changed = 0; + + if (rt->opt_coax_switch != ucontrol->value.enumerated.item[0]) { + rt->opt_coax_switch = ucontrol->value.enumerated.item[0]; + usb6fire_control_opt_coax_update(rt); + changed = 1; + } + return changed; +} + +static int usb6fire_control_opt_coax_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct control_runtime *rt = snd_kcontrol_chip(kcontrol); + ucontrol->value.enumerated.item[0] = rt->opt_coax_switch; + return 0; +} + +static struct __devinitdata snd_kcontrol_new elements[] = { + { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "Master Playback Volume", + .index = 0, + .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, + .info = usb6fire_control_master_vol_info, + .get = usb6fire_control_master_vol_get, + .put = usb6fire_control_master_vol_put + }, + { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "Line/Phono Capture Route", + .index = 0, + .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, + .info = usb6fire_control_line_phono_info, + .get = usb6fire_control_line_phono_get, + .put = usb6fire_control_line_phono_put + }, + { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "Opt/Coax Capture Route", + .index = 0, + .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, + .info = usb6fire_control_opt_coax_info, + .get = usb6fire_control_opt_coax_get, + .put = usb6fire_control_opt_coax_put + }, + {} +}; + +int __devinit usb6fire_control_init(struct sfire_chip *chip) +{ + int i; + int ret; + struct control_runtime *rt = kzalloc(sizeof(struct control_runtime), + GFP_KERNEL); + struct comm_runtime *comm_rt = chip->comm; + + if (!rt) + return -ENOMEM; + + rt->chip = chip; + + i = 0; + while (init_data[i].type) { + comm_rt->write8(comm_rt, init_data[i].type, init_data[i].reg, + init_data[i].value); + i++; + } + + usb6fire_control_opt_coax_update(rt); + usb6fire_control_line_phono_update(rt); + usb6fire_control_master_vol_update(rt); + + i = 0; + while (elements[i].name) { + ret = snd_ctl_add(chip->card, snd_ctl_new1(&elements[i], rt)); + if (ret < 0) { + kfree(rt); + snd_printk(KERN_ERR PREFIX "cannot add control.\n"); + return ret; + } + i++; + } + + chip->control = rt; + return 0; +} + +void usb6fire_control_abort(struct sfire_chip *chip) +{} + +void usb6fire_control_destroy(struct sfire_chip *chip) +{ + kfree(chip->control); + chip->control = NULL; +} diff --git a/sound/usb/6fire/control.h b/sound/usb/6fire/control.h new file mode 100644 index 000000000000..b534c777ab02 --- /dev/null +++ b/sound/usb/6fire/control.h @@ -0,0 +1,37 @@ +/* + * Linux driver for TerraTec DMX 6Fire USB + * + * Author: Torsten Schenk <torsten.schenk@zoho.com> + * Created: Jan 01, 2011 + * Version: 0.3.0 + * Copyright: (C) Torsten Schenk + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef USB6FIRE_CONTROL_H +#define USB6FIRE_CONTROL_H + +#include "common.h" + +enum { + CONTROL_MAX_ELEMENTS = 32 +}; + +struct control_runtime { + struct sfire_chip *chip; + + struct snd_kcontrol *element[CONTROL_MAX_ELEMENTS]; + bool opt_coax_switch; + bool line_phono_switch; + u8 master_vol; +}; + +int __devinit usb6fire_control_init(struct sfire_chip *chip); +void usb6fire_control_abort(struct sfire_chip *chip); +void usb6fire_control_destroy(struct sfire_chip *chip); +#endif /* USB6FIRE_CONTROL_H */ + diff --git a/sound/usb/6fire/firmware.c b/sound/usb/6fire/firmware.c new file mode 100644 index 000000000000..9081a54a9c6c --- /dev/null +++ b/sound/usb/6fire/firmware.c @@ -0,0 +1,426 @@ +/* + * Linux driver for TerraTec DMX 6Fire USB + * + * Firmware loader + * + * Currently not working for all devices. To be able to use the device + * in linux, it is also possible to let the windows driver upload the firmware. + * For that, start the computer in windows and reboot. + * As long as the device is connected to the power supply, no firmware reload + * needs to be performed. + * + * Author: Torsten Schenk <torsten.schenk@zoho.com> + * Created: Jan 01, 2011 + * Version: 0.3.0 + * Copyright: (C) Torsten Schenk + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/firmware.h> + +#include "firmware.h" +#include "chip.h" + +MODULE_FIRMWARE("6fire/dmx6firel2.ihx"); +MODULE_FIRMWARE("6fire/dmx6fireap.ihx"); +MODULE_FIRMWARE("6fire/dmx6firecf.bin"); + +enum { + FPGA_BUFSIZE = 512, FPGA_EP = 2 +}; + +static const u8 BIT_REVERSE_TABLE[256] = { + 0x00, 0x80, 0x40, 0xc0, 0x20, 0xa0, 0x60, 0xe0, 0x10, 0x90, 0x50, + 0xd0, 0x30, 0xb0, 0x70, 0xf0, 0x08, 0x88, 0x48, 0xc8, 0x28, 0xa8, + 0x68, 0xe8, 0x18, 0x98, 0x58, 0xd8, 0x38, 0xb8, 0x78, 0xf8, 0x04, + 0x84, 0x44, 0xc4, 0x24, 0xa4, 0x64, 0xe4, 0x14, 0x94, 0x54, 0xd4, + 0x34, 0xb4, 0x74, 0xf4, 0x0c, 0x8c, 0x4c, 0xcc, 0x2c, 0xac, 0x6c, + 0xec, 0x1c, 0x9c, 0x5c, 0xdc, 0x3c, 0xbc, 0x7c, 0xfc, 0x02, 0x82, + 0x42, 0xc2, 0x22, 0xa2, 0x62, 0xe2, 0x12, 0x92, 0x52, 0xd2, 0x32, + 0xb2, 0x72, 0xf2, 0x0a, 0x8a, 0x4a, 0xca, 0x2a, 0xaa, 0x6a, 0xea, + 0x1a, 0x9a, 0x5a, 0xda, 0x3a, 0xba, 0x7a, 0xfa, 0x06, 0x86, 0x46, + 0xc6, 0x26, 0xa6, 0x66, 0xe6, 0x16, 0x96, 0x56, 0xd6, 0x36, 0xb6, + 0x76, 0xf6, 0x0e, 0x8e, 0x4e, 0xce, 0x2e, 0xae, 0x6e, 0xee, 0x1e, + 0x9e, 0x5e, 0xde, 0x3e, 0xbe, 0x7e, 0xfe, 0x01, 0x81, 0x41, 0xc1, + 0x21, 0xa1, 0x61, 0xe1, 0x11, 0x91, 0x51, 0xd1, 0x31, 0xb1, 0x71, + 0xf1, 0x09, 0x89, 0x49, 0xc9, 0x29, 0xa9, 0x69, 0xe9, 0x19, 0x99, + 0x59, 0xd9, 0x39, 0xb9, 0x79, 0xf9, 0x05, 0x85, 0x45, 0xc5, 0x25, + 0xa5, 0x65, 0xe5, 0x15, 0x95, 0x55, 0xd5, 0x35, 0xb5, 0x75, 0xf5, + 0x0d, 0x8d, 0x4d, 0xcd, 0x2d, 0xad, 0x6d, 0xed, 0x1d, 0x9d, 0x5d, + 0xdd, 0x3d, 0xbd, 0x7d, 0xfd, 0x03, 0x83, 0x43, 0xc3, 0x23, 0xa3, + 0x63, 0xe3, 0x13, 0x93, 0x53, 0xd3, 0x33, 0xb3, 0x73, 0xf3, 0x0b, + 0x8b, 0x4b, 0xcb, 0x2b, 0xab, 0x6b, 0xeb, 0x1b, 0x9b, 0x5b, 0xdb, + 0x3b, 0xbb, 0x7b, 0xfb, 0x07, 0x87, 0x47, 0xc7, 0x27, 0xa7, 0x67, + 0xe7, 0x17, 0x97, 0x57, 0xd7, 0x37, 0xb7, 0x77, 0xf7, 0x0f, 0x8f, + 0x4f, 0xcf, 0x2f, 0xaf, 0x6f, 0xef, 0x1f, 0x9f, 0x5f, 0xdf, 0x3f, + 0xbf, 0x7f, 0xff }; + +/* + * wMaxPacketSize of pcm endpoints. + * keep synced with rates_in_packet_size and rates_out_packet_size in pcm.c + * fpp: frames per isopacket + * + * CAUTION: keep sizeof <= buffer[] in usb6fire_fw_init + */ +static const u8 ep_w_max_packet_size[] = { + 0xe4, 0x00, 0xe4, 0x00, /* alt 1: 228 EP2 and EP6 (7 fpp) */ + 0xa4, 0x01, 0xa4, 0x01, /* alt 2: 420 EP2 and EP6 (13 fpp)*/ + 0x94, 0x01, 0x5c, 0x02 /* alt 3: 404 EP2 and 604 EP6 (25 fpp) */ +}; + +struct ihex_record { + u16 address; + u8 len; + u8 data[256]; + char error; /* true if an error occured parsing this record */ + + u8 max_len; /* maximum record length in whole ihex */ + + /* private */ + const char *txt_data; + unsigned int txt_length; + unsigned int txt_offset; /* current position in txt_data */ +}; + +static u8 usb6fire_fw_ihex_nibble(const u8 n) +{ + if (n >= '0' && n <= '9') + return n - '0'; + else if (n >= 'A' && n <= 'F') + return n - ('A' - 10); + else if (n >= 'a' && n <= 'f') + return n - ('a' - 10); + return 0; +} + +static u8 usb6fire_fw_ihex_hex(const u8 *data, u8 *crc) +{ + u8 val = (usb6fire_fw_ihex_nibble(data[0]) << 4) | + usb6fire_fw_ihex_nibble(data[1]); + *crc += val; + return val; +} + +/* + * returns true if record is available, false otherwise. + * iff an error occured, false will be returned and record->error will be true. + */ +static bool usb6fire_fw_ihex_next_record(struct ihex_record *record) +{ + u8 crc = 0; + u8 type; + int i; + + record->error = false; + + /* find begin of record (marked by a colon) */ + while (record->txt_offset < record->txt_length + && record->txt_data[record->txt_offset] != ':') + record->txt_offset++; + if (record->txt_offset == record->txt_length) + return false; + + /* number of characters needed for len, addr and type entries */ + record->txt_offset++; + if (record->txt_offset + 8 > record->txt_length) { + record->error = true; + return false; + } + + record->len = usb6fire_fw_ihex_hex(record->txt_data + + record->txt_offset, &crc); + record->txt_offset += 2; + record->address = usb6fire_fw_ihex_hex(record->txt_data + + record->txt_offset, &crc) << 8; + record->txt_offset += 2; + record->address |= usb6fire_fw_ihex_hex(record->txt_data + + record->txt_offset, &crc); + record->txt_offset += 2; + type = usb6fire_fw_ihex_hex(record->txt_data + + record->txt_offset, &crc); + record->txt_offset += 2; + + /* number of characters needed for data and crc entries */ + if (record->txt_offset + 2 * (record->len + 1) > record->txt_length) { + record->error = true; + return false; + } + for (i = 0; i < record->len; i++) { + record->data[i] = usb6fire_fw_ihex_hex(record->txt_data + + record->txt_offset, &crc); + record->txt_offset += 2; + } + usb6fire_fw_ihex_hex(record->txt_data + record->txt_offset, &crc); + if (crc) { + record->error = true; + return false; + } + + if (type == 1 || !record->len) /* eof */ + return false; + else if (type == 0) + return true; + else { + record->error = true; + return false; + } +} + +static int usb6fire_fw_ihex_init(const struct firmware *fw, + struct ihex_record *record) +{ + record->txt_data = fw->data; + record->txt_length = fw->size; + record-> |