summaryrefslogtreecommitdiffstats
path: root/net/bluetooth/hci_core.c
diff options
context:
space:
mode:
Diffstat (limited to 'net/bluetooth/hci_core.c')
-rw-r--r--net/bluetooth/hci_core.c120
1 files changed, 60 insertions, 60 deletions
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index e3bbdd537b90..20fe5ef6abc5 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -617,7 +617,7 @@ static void hci_init2_req(struct hci_request *req, unsigned long opt)
*/
hdev->max_page = 0x01;
- if (test_bit(HCI_SSP_ENABLED, &hdev->dev_flags)) {
+ if (hci_dev_test_flag(hdev, HCI_SSP_ENABLED)) {
u8 mode = 0x01;
hci_req_add(req, HCI_OP_WRITE_SSP_MODE,
@@ -656,7 +656,7 @@ static void hci_init2_req(struct hci_request *req, unsigned long opt)
sizeof(cp), &cp);
}
- if (test_bit(HCI_LINK_SECURITY, &hdev->dev_flags)) {
+ if (hci_dev_test_flag(hdev, HCI_LINK_SECURITY)) {
u8 enable = 1;
hci_req_add(req, HCI_OP_WRITE_AUTH_ENABLE, sizeof(enable),
&enable);
@@ -693,7 +693,7 @@ static void hci_set_le_support(struct hci_request *req)
memset(&cp, 0, sizeof(cp));
- if (test_bit(HCI_LE_ENABLED, &hdev->dev_flags)) {
+ if (hci_dev_test_flag(hdev, HCI_LE_ENABLED)) {
cp.le = 0x01;
cp.simul = 0x00;
}
@@ -881,7 +881,7 @@ static void hci_init4_req(struct hci_request *req, unsigned long opt)
hci_req_add(req, HCI_OP_READ_SYNC_TRAIN_PARAMS, 0, NULL);
/* Enable Secure Connections if supported and configured */
- if (test_bit(HCI_SSP_ENABLED, &hdev->dev_flags) &&
+ if (hci_dev_test_flag(hdev, HCI_SSP_ENABLED) &&
bredr_sc_enabled(hdev)) {
u8 support = 0x01;
@@ -901,7 +901,7 @@ static int __hci_init(struct hci_dev *hdev)
/* The Device Under Test (DUT) mode is special and available for
* all controller types. So just create it early on.
*/
- if (test_bit(HCI_SETUP, &hdev->dev_flags)) {
+ if (hci_dev_test_flag(hdev, HCI_SETUP)) {
debugfs_create_file("dut_mode", 0644, hdev->debugfs, hdev,
&dut_mode_fops);
}
@@ -937,8 +937,8 @@ static int __hci_init(struct hci_dev *hdev)
* So only when in setup phase or config phase, create the debugfs
* entries and register the SMP channels.
*/
- if (!test_bit(HCI_SETUP, &hdev->dev_flags) &&
- !test_bit(HCI_CONFIG, &hdev->dev_flags))
+ if (!hci_dev_test_flag(hdev, HCI_SETUP) &&
+ !hci_dev_test_flag(hdev, HCI_CONFIG))
return 0;
hci_debugfs_create_common(hdev);
@@ -1300,12 +1300,12 @@ int hci_inquiry(void __user *arg)
if (!hdev)
return -ENODEV;
- if (test_bit(HCI_USER_CHANNEL, &hdev->dev_flags)) {
+ if (hci_dev_test_flag(hdev, HCI_USER_CHANNEL)) {
err = -EBUSY;
goto done;
}
- if (test_bit(HCI_UNCONFIGURED, &hdev->dev_flags)) {
+ if (hci_dev_test_flag(hdev, HCI_UNCONFIGURED)) {
err = -EOPNOTSUPP;
goto done;
}
@@ -1315,7 +1315,7 @@ int hci_inquiry(void __user *arg)
goto done;
}
- if (!test_bit(HCI_BREDR_ENABLED, &hdev->dev_flags)) {
+ if (!hci_dev_test_flag(hdev, HCI_BREDR_ENABLED)) {
err = -EOPNOTSUPP;
goto done;
}
@@ -1387,17 +1387,17 @@ static int hci_dev_do_open(struct hci_dev *hdev)
hci_req_lock(hdev);
- if (test_bit(HCI_UNREGISTER, &hdev->dev_flags)) {
+ if (hci_dev_test_flag(hdev, HCI_UNREGISTER)) {
ret = -ENODEV;
goto done;
}
- if (!test_bit(HCI_SETUP, &hdev->dev_flags) &&
- !test_bit(HCI_CONFIG, &hdev->dev_flags)) {
+ if (!hci_dev_test_flag(hdev, HCI_SETUP) &&
+ !hci_dev_test_flag(hdev, HCI_CONFIG)) {
/* Check for rfkill but allow the HCI setup stage to
* proceed (which in itself doesn't cause any RF activity).
*/
- if (test_bit(HCI_RFKILLED, &hdev->dev_flags)) {
+ if (hci_dev_test_flag(hdev, HCI_RFKILLED)) {
ret = -ERFKILL;
goto done;
}
@@ -1414,7 +1414,7 @@ static int hci_dev_do_open(struct hci_dev *hdev)
* This check is only valid for BR/EDR controllers
* since AMP controllers do not have an address.
*/
- if (!test_bit(HCI_USER_CHANNEL, &hdev->dev_flags) &&
+ if (!hci_dev_test_flag(hdev, HCI_USER_CHANNEL) &&
hdev->dev_type == HCI_BREDR &&
!bacmp(&hdev->bdaddr, BDADDR_ANY) &&
!bacmp(&hdev->static_addr, BDADDR_ANY)) {
@@ -1436,7 +1436,7 @@ static int hci_dev_do_open(struct hci_dev *hdev)
atomic_set(&hdev->cmd_cnt, 1);
set_bit(HCI_INIT, &hdev->flags);
- if (test_bit(HCI_SETUP, &hdev->dev_flags)) {
+ if (hci_dev_test_flag(hdev, HCI_SETUP)) {
if (hdev->setup)
ret = hdev->setup(hdev);
@@ -1458,11 +1458,11 @@ static int hci_dev_do_open(struct hci_dev *hdev)
* also the original Bluetooth public device address
* will be read using the Read BD Address command.
*/
- if (test_bit(HCI_UNCONFIGURED, &hdev->dev_flags))
+ if (hci_dev_test_flag(hdev, HCI_UNCONFIGURED))
ret = __hci_unconf_init(hdev);
}
- if (test_bit(HCI_CONFIG, &hdev->dev_flags)) {
+ if (hci_dev_test_flag(hdev, HCI_CONFIG)) {
/* If public address change is configured, ensure that
* the address gets programmed. If the driver does not
* support changing the public address, fail the power
@@ -1476,8 +1476,8 @@ static int hci_dev_do_open(struct hci_dev *hdev)
}
if (!ret) {
- if (!test_bit(HCI_UNCONFIGURED, &hdev->dev_flags) &&
- !test_bit(HCI_USER_CHANNEL, &hdev->dev_flags))
+ if (!hci_dev_test_flag(hdev, HCI_UNCONFIGURED) &&
+ !hci_dev_test_flag(hdev, HCI_USER_CHANNEL))
ret = __hci_init(hdev);
}
@@ -1488,10 +1488,10 @@ static int hci_dev_do_open(struct hci_dev *hdev)
set_bit(HCI_RPA_EXPIRED, &hdev->dev_flags);
set_bit(HCI_UP, &hdev->flags);
hci_notify(hdev, HCI_DEV_UP);
- if (!test_bit(HCI_SETUP, &hdev->dev_flags) &&
- !test_bit(HCI_CONFIG, &hdev->dev_flags) &&
- !test_bit(HCI_UNCONFIGURED, &hdev->dev_flags) &&
- !test_bit(HCI_USER_CHANNEL, &hdev->dev_flags) &&
+ if (!hci_dev_test_flag(hdev, HCI_SETUP) &&
+ !hci_dev_test_flag(hdev, HCI_CONFIG) &&
+ !hci_dev_test_flag(hdev, HCI_UNCONFIGURED) &&
+ !hci_dev_test_flag(hdev, HCI_USER_CHANNEL) &&
hdev->dev_type == HCI_BREDR) {
hci_dev_lock(hdev);
mgmt_powered(hdev, 1);
@@ -1543,8 +1543,8 @@ int hci_dev_open(__u16 dev)
* HCI_USER_CHANNEL will be set first before attempting to
* open the device.
*/
- if (test_bit(HCI_UNCONFIGURED, &hdev->dev_flags) &&
- !test_bit(HCI_USER_CHANNEL, &hdev->dev_flags)) {
+ if (hci_dev_test_flag(hdev, HCI_UNCONFIGURED) &&
+ !hci_dev_test_flag(hdev, HCI_USER_CHANNEL)) {
err = -EOPNOTSUPP;
goto done;
}
@@ -1569,8 +1569,8 @@ int hci_dev_open(__u16 dev)
* is in use this bit will be cleared again and userspace has
* to explicitly enable it.
*/
- if (!test_bit(HCI_USER_CHANNEL, &hdev->dev_flags) &&
- !test_bit(HCI_MGMT, &hdev->dev_flags))
+ if (!hci_dev_test_flag(hdev, HCI_USER_CHANNEL) &&
+ !hci_dev_test_flag(hdev, HCI_MGMT))
set_bit(HCI_BONDABLE, &hdev->dev_flags);
err = hci_dev_do_open(hdev);
@@ -1601,7 +1601,7 @@ static int hci_dev_do_close(struct hci_dev *hdev)
{
BT_DBG("%s %p", hdev->name, hdev);
- if (!test_bit(HCI_UNREGISTER, &hdev->dev_flags)) {
+ if (!hci_dev_test_flag(hdev, HCI_UNREGISTER)) {
/* Execute vendor specific shutdown routine */
if (hdev->shutdown)
hdev->shutdown(hdev);
@@ -1635,7 +1635,7 @@ static int hci_dev_do_close(struct hci_dev *hdev)
cancel_delayed_work_sync(&hdev->le_scan_disable);
cancel_delayed_work_sync(&hdev->le_scan_restart);
- if (test_bit(HCI_MGMT, &hdev->dev_flags))
+ if (hci_dev_test_flag(hdev, HCI_MGMT))
cancel_delayed_work_sync(&hdev->rpa_expired);
/* Avoid potential lockdep warnings from the *_flush() calls by
@@ -1667,8 +1667,8 @@ static int hci_dev_do_close(struct hci_dev *hdev)
/* Reset device */
skb_queue_purge(&hdev->cmd_q);
atomic_set(&hdev->cmd_cnt, 1);
- if (!test_bit(HCI_AUTO_OFF, &hdev->dev_flags) &&
- !test_bit(HCI_UNCONFIGURED, &hdev->dev_flags) &&
+ if (!hci_dev_test_flag(hdev, HCI_AUTO_OFF) &&
+ !hci_dev_test_flag(hdev, HCI_UNCONFIGURED) &&
test_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks)) {
set_bit(HCI_INIT, &hdev->flags);
__hci_req_sync(hdev, hci_reset_req, 0, HCI_CMD_TIMEOUT);
@@ -1723,7 +1723,7 @@ int hci_dev_close(__u16 dev)
if (!hdev)
return -ENODEV;
- if (test_bit(HCI_USER_CHANNEL, &hdev->dev_flags)) {
+ if (hci_dev_test_flag(hdev, HCI_USER_CHANNEL)) {
err = -EBUSY;
goto done;
}
@@ -1786,12 +1786,12 @@ int hci_dev_reset(__u16 dev)
goto done;
}
- if (test_bit(HCI_USER_CHANNEL, &hdev->dev_flags)) {
+ if (hci_dev_test_flag(hdev, HCI_USER_CHANNEL)) {
err = -EBUSY;
goto done;
}
- if (test_bit(HCI_UNCONFIGURED, &hdev->dev_flags)) {
+ if (hci_dev_test_flag(hdev, HCI_UNCONFIGURED)) {
err = -EOPNOTSUPP;
goto done;
}
@@ -1812,12 +1812,12 @@ int hci_dev_reset_stat(__u16 dev)
if (!hdev)
return -ENODEV;
- if (test_bit(HCI_USER_CHANNEL, &hdev->dev_flags)) {
+ if (hci_dev_test_flag(hdev, HCI_USER_CHANNEL)) {
ret = -EBUSY;
goto done;
}
- if (test_bit(HCI_UNCONFIGURED, &hdev->dev_flags)) {
+ if (hci_dev_test_flag(hdev, HCI_UNCONFIGURED)) {
ret = -EOPNOTSUPP;
goto done;
}
@@ -1851,14 +1851,14 @@ static void hci_update_scan_state(struct hci_dev *hdev, u8 scan)
&hdev->dev_flags);
}
- if (!test_bit(HCI_MGMT, &hdev->dev_flags))
+ if (!hci_dev_test_flag(hdev, HCI_MGMT))
return;
if (conn_changed || discov_changed) {
/* In case this was disabled through mgmt */
set_bit(HCI_BREDR_ENABLED, &hdev->dev_flags);
- if (test_bit(HCI_LE_ENABLED, &hdev->dev_flags))
+ if (hci_dev_test_flag(hdev, HCI_LE_ENABLED))
mgmt_update_adv_data(hdev);
mgmt_new_settings(hdev);
@@ -1878,12 +1878,12 @@ int hci_dev_cmd(unsigned int cmd, void __user *arg)
if (!hdev)
return -ENODEV;
- if (test_bit(HCI_USER_CHANNEL, &hdev->dev_flags)) {
+ if (hci_dev_test_flag(hdev, HCI_USER_CHANNEL)) {
err = -EBUSY;
goto done;
}
- if (test_bit(HCI_UNCONFIGURED, &hdev->dev_flags)) {
+ if (hci_dev_test_flag(hdev, HCI_UNCONFIGURED)) {
err = -EOPNOTSUPP;
goto done;
}
@@ -1893,7 +1893,7 @@ int hci_dev_cmd(unsigned int cmd, void __user *arg)
goto done;
}
- if (!test_bit(HCI_BREDR_ENABLED, &hdev->dev_flags)) {
+ if (!hci_dev_test_flag(hdev, HCI_BREDR_ENABLED)) {
err = -EOPNOTSUPP;
goto done;
}
@@ -1997,7 +1997,7 @@ int hci_get_dev_list(void __user *arg)
* is running, but in that case still indicate that the
* device is actually down.
*/
- if (test_bit(HCI_AUTO_OFF, &hdev->dev_flags))
+ if (hci_dev_test_flag(hdev, HCI_AUTO_OFF))
flags &= ~BIT(HCI_UP);
(dr + n)->dev_id = hdev->id;
@@ -2035,7 +2035,7 @@ int hci_get_dev_info(void __user *arg)
* is running, but in that case still indicate that the
* device is actually down.
*/
- if (test_bit(HCI_AUTO_OFF, &hdev->dev_flags))
+ if (hci_dev_test_flag(hdev, HCI_AUTO_OFF))
flags = hdev->flags & ~BIT(HCI_UP);
else
flags = hdev->flags;
@@ -2078,13 +2078,13 @@ static int hci_rfkill_set_block(void *data, bool blocked)
BT_DBG("%p name %s blocked %d", hdev, hdev->name, blocked);
- if (test_bit(HCI_USER_CHANNEL, &hdev->dev_flags))
+ if (hci_dev_test_flag(hdev, HCI_USER_CHANNEL))
return -EBUSY;
if (blocked) {
set_bit(HCI_RFKILLED, &hdev->dev_flags);
- if (!test_bit(HCI_SETUP, &hdev->dev_flags) &&
- !test_bit(HCI_CONFIG, &hdev->dev_flags))
+ if (!hci_dev_test_flag(hdev, HCI_SETUP) &&
+ !hci_dev_test_flag(hdev, HCI_CONFIG))
hci_dev_do_close(hdev);
} else {
clear_bit(HCI_RFKILLED, &hdev->dev_flags);
@@ -2116,14 +2116,14 @@ static void hci_power_on(struct work_struct *work)
* ignored and they need to be checked now. If they are still
* valid, it is important to turn the device back off.
*/
- if (test_bit(HCI_RFKILLED, &hdev->dev_flags) ||
- test_bit(HCI_UNCONFIGURED, &hdev->dev_flags) ||
+ if (hci_dev_test_flag(hdev, HCI_RFKILLED) ||
+ hci_dev_test_flag(hdev, HCI_UNCONFIGURED) ||
(hdev->dev_type == HCI_BREDR &&
!bacmp(&hdev->bdaddr, BDADDR_ANY) &&
!bacmp(&hdev->static_addr, BDADDR_ANY))) {
clear_bit(HCI_AUTO_OFF, &hdev->dev_flags);
hci_dev_do_close(hdev);
- } else if (test_bit(HCI_AUTO_OFF, &hdev->dev_flags)) {
+ } else if (hci_dev_test_flag(hdev, HCI_AUTO_OFF)) {
queue_delayed_work(hdev->req_workqueue, &hdev->power_off,
HCI_AUTO_OFF_TIMEOUT);
}
@@ -2132,7 +2132,7 @@ static void hci_power_on(struct work_struct *work)
/* For unconfigured devices, set the HCI_RAW flag
* so that userspace can easily identify them.
*/
- if (test_bit(HCI_UNCONFIGURED, &hdev->dev_flags))
+ if (hci_dev_test_flag(hdev, HCI_UNCONFIGURED))
set_bit(HCI_RAW, &hdev->flags);
/* For fully configured devices, this will send
@@ -2147,7 +2147,7 @@ static void hci_power_on(struct work_struct *work)
/* When the controller is now configured, then it
* is important to clear the HCI_RAW flag.
*/
- if (!test_bit(HCI_UNCONFIGURED, &hdev->dev_flags))
+ if (!hci_dev_test_flag(hdev, HCI_UNCONFIGURED))
clear_bit(HCI_RAW, &hdev->flags);
/* Powering on the controller with HCI_CONFIG set only
@@ -2986,7 +2986,7 @@ static void le_scan_restart_work(struct work_struct *work)
BT_DBG("%s", hdev->name);
/* If controller is not scanning we are done. */
- if (!test_bit(HCI_LE_SCAN, &hdev->dev_flags))
+ if (!hci_dev_test_flag(hdev, HCI_LE_SCAN))
return;
hci_req_init(&req, hdev);
@@ -3021,7 +3021,7 @@ void hci_copy_identity_address(struct hci_dev *hdev, bdaddr_t *bdaddr,
{
if (test_bit(HCI_FORCE_STATIC_ADDR, &hdev->dbg_flags) ||
!bacmp(&hdev->bdaddr, BDADDR_ANY) ||
- (!test_bit(HCI_BREDR_ENABLED, &hdev->dev_flags) &&
+ (!hci_dev_test_flag(hdev, HCI_BREDR_ENABLED) &&
bacmp(&hdev->static_addr, BDADDR_ANY))) {
bacpy(bdaddr, &hdev->static_addr);
*bdaddr_type = ADDR_LE_DEV_RANDOM;
@@ -3251,8 +3251,8 @@ void hci_unregister_dev(struct hci_dev *hdev)
cancel_work_sync(&hdev->power_on);
if (!test_bit(HCI_INIT, &hdev->flags) &&
- !test_bit(HCI_SETUP, &hdev->dev_flags) &&
- !test_bit(HCI_CONFIG, &hdev->dev_flags)) {
+ !hci_dev_test_flag(hdev, HCI_SETUP) &&
+ !hci_dev_test_flag(hdev, HCI_CONFIG)) {
hci_dev_lock(hdev);
mgmt_index_removed(hdev);
hci_dev_unlock(hdev);
@@ -3926,7 +3926,7 @@ static inline int __get_blocks(struct hci_dev *hdev, struct sk_buff *skb)
static void __check_timeout(struct hci_dev *hdev, unsigned int cnt)
{
- if (!test_bit(HCI_UNCONFIGURED, &hdev->dev_flags)) {
+ if (!hci_dev_test_flag(hdev, HCI_UNCONFIGURED)) {
/* ACL tx timeout must be longer than maximum
* link supervision timeout (40.9 seconds) */
if (!cnt && time_after(jiffies, hdev->acl_last_tx +
@@ -4109,7 +4109,7 @@ static void hci_sched_le(struct hci_dev *hdev)
if (!hci_conn_num(hdev, LE_LINK))
return;
- if (!test_bit(HCI_UNCONFIGURED, &hdev->dev_flags)) {
+ if (!hci_dev_test_flag(hdev, HCI_UNCONFIGURED)) {
/* LE tx timeout must be longer than maximum
* link supervision timeout (40.9 seconds) */
if (!hdev->le_cnt && hdev->le_pkts &&
@@ -4157,7 +4157,7 @@ static void hci_tx_work(struct work_struct *work)
BT_DBG("%s acl %d sco %d le %d", hdev->name, hdev->acl_cnt,
hdev->sco_cnt, hdev->le_cnt);
- if (!test_bit(HCI_USER_CHANNEL, &hdev->dev_flags)) {
+ if (!hci_dev_test_flag(hdev, HCI_USER_CHANNEL)) {
/* Schedule queues and send stuff to HCI driver */
hci_sched_acl(hdev);
hci_sched_sco(hdev);
@@ -4354,7 +4354,7 @@ static void hci_rx_work(struct work_struct *work)
hci_send_to_sock(hdev, skb);
}
- if (test_bit(HCI_USER_CHANNEL, &hdev->dev_flags)) {
+ if (hci_dev_test_flag(hdev, HCI_USER_CHANNEL)) {
kfree_skb(skb);
continue;
}