diff options
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/devfreq/Kconfig | 22 | ||||
-rw-r--r-- | drivers/devfreq/Makefile | 2 | ||||
-rw-r--r-- | drivers/devfreq/exynos/Makefile | 3 | ||||
-rw-r--r-- | drivers/devfreq/exynos/exynos4_bus.c | 1055 | ||||
-rw-r--r-- | drivers/devfreq/exynos/exynos4_bus.h | 110 | ||||
-rw-r--r-- | drivers/devfreq/exynos/exynos5_bus.c | 431 | ||||
-rw-r--r-- | drivers/devfreq/exynos/exynos_ppmu.c | 119 | ||||
-rw-r--r-- | drivers/devfreq/exynos/exynos_ppmu.h | 86 |
8 files changed, 0 insertions, 1828 deletions
diff --git a/drivers/devfreq/Kconfig b/drivers/devfreq/Kconfig index 30e1daf1c827..78dac0e9da11 100644 --- a/drivers/devfreq/Kconfig +++ b/drivers/devfreq/Kconfig @@ -90,28 +90,6 @@ config ARM_EXYNOS_BUS_DEVFREQ and adjusts the operating frequencies and voltages with OPP support. This does not yet operate with optimal voltages. -config ARM_EXYNOS4_BUS_DEVFREQ - bool "ARM Exynos4210/4212/4412 Memory Bus DEVFREQ Driver" - depends on (CPU_EXYNOS4210 || SOC_EXYNOS4212 || SOC_EXYNOS4412) && !ARCH_MULTIPLATFORM - select DEVFREQ_GOV_SIMPLE_ONDEMAND - select PM_OPP - help - This adds the DEVFREQ driver for Exynos4210 memory bus (vdd_int) - and Exynos4212/4412 memory interface and bus (vdd_mif + vdd_int). - It reads PPMU counters of memory controllers and adjusts - the operating frequencies and voltages with OPP support. - This does not yet operate with optimal voltages. - -config ARM_EXYNOS5_BUS_DEVFREQ - tristate "ARM Exynos5250 Bus DEVFREQ Driver" - depends on SOC_EXYNOS5250 - select DEVFREQ_GOV_SIMPLE_ONDEMAND - select PM_OPP - help - This adds the DEVFREQ driver for Exynos5250 bus interface (vdd_int). - It reads PPMU counters of memory controllers and adjusts the - operating frequencies and voltages with OPP support. - config ARM_TEGRA_DEVFREQ tristate "Tegra DEVFREQ Driver" depends on ARCH_TEGRA_124_SOC diff --git a/drivers/devfreq/Makefile b/drivers/devfreq/Makefile index 2633087d5c63..09f11d9d40d5 100644 --- a/drivers/devfreq/Makefile +++ b/drivers/devfreq/Makefile @@ -8,8 +8,6 @@ obj-$(CONFIG_DEVFREQ_GOV_PASSIVE) += governor_passive.o # DEVFREQ Drivers obj-$(CONFIG_ARM_EXYNOS_BUS_DEVFREQ) += exynos-bus.o -obj-$(CONFIG_ARM_EXYNOS4_BUS_DEVFREQ) += exynos/ -obj-$(CONFIG_ARM_EXYNOS5_BUS_DEVFREQ) += exynos/ obj-$(CONFIG_ARM_TEGRA_DEVFREQ) += tegra-devfreq.o # DEVFREQ Event Drivers diff --git a/drivers/devfreq/exynos/Makefile b/drivers/devfreq/exynos/Makefile deleted file mode 100644 index 49bc9175f923..000000000000 --- a/drivers/devfreq/exynos/Makefile +++ /dev/null @@ -1,3 +0,0 @@ -# Exynos DEVFREQ Drivers -obj-$(CONFIG_ARM_EXYNOS4_BUS_DEVFREQ) += exynos_ppmu.o exynos4_bus.o -obj-$(CONFIG_ARM_EXYNOS5_BUS_DEVFREQ) += exynos_ppmu.o exynos5_bus.o diff --git a/drivers/devfreq/exynos/exynos4_bus.c b/drivers/devfreq/exynos/exynos4_bus.c deleted file mode 100644 index da9509205169..000000000000 --- a/drivers/devfreq/exynos/exynos4_bus.c +++ /dev/null @@ -1,1055 +0,0 @@ -/* drivers/devfreq/exynos4210_memorybus.c - * - * Copyright (c) 2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * MyungJoo Ham <myungjoo.ham@samsung.com> - * - * EXYNOS4 - Memory/Bus clock frequency scaling support in DEVFREQ framework - * This version supports EXYNOS4210 only. This changes bus frequencies - * and vddint voltages. Exynos4412/4212 should be able to be supported - * with minor modifications. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include <linux/io.h> -#include <linux/slab.h> -#include <linux/mutex.h> -#include <linux/suspend.h> -#include <linux/pm_opp.h> -#include <linux/devfreq.h> -#include <linux/platform_device.h> -#include <linux/regulator/consumer.h> -#include <linux/module.h> - -#include <mach/map.h> - -#include "exynos_ppmu.h" -#include "exynos4_bus.h" - -#define MAX_SAFEVOLT 1200000 /* 1.2V */ - -enum exynos4_busf_type { - TYPE_BUSF_EXYNOS4210, - TYPE_BUSF_EXYNOS4x12, -}; - -/* Assume that the bus is saturated if the utilization is 40% */ -#define BUS_SATURATION_RATIO 40 - -enum busclk_level_idx { - LV_0 = 0, - LV_1, - LV_2, - LV_3, - LV_4, - _LV_END -}; - -enum exynos_ppmu_idx { - PPMU_DMC0, - PPMU_DMC1, - PPMU_END, -}; - -#define EX4210_LV_MAX LV_2 -#define EX4x12_LV_MAX LV_4 -#define EX4210_LV_NUM (LV_2 + 1) -#define EX4x12_LV_NUM (LV_4 + 1) - -/** - * struct busfreq_opp_info - opp information for bus - * @rate: Frequency in hertz - * @volt: Voltage in microvolts corresponding to this OPP - */ -struct busfreq_opp_info { - unsigned long rate; - unsigned long volt; -}; - -struct busfreq_data { - enum exynos4_busf_type type; - struct device *dev; - struct devfreq *devfreq; - bool disabled; - struct regulator *vdd_int; - struct regulator *vdd_mif; /* Exynos4412/4212 only */ - struct busfreq_opp_info curr_oppinfo; - struct busfreq_ppmu_data ppmu_data; - - struct notifier_block pm_notifier; - struct mutex lock; - - /* Dividers calculated at boot/probe-time */ - unsigned int dmc_divtable[_LV_END]; /* DMC0 */ - unsigned int top_divtable[_LV_END]; -}; - -/* 4210 controls clock of mif and voltage of int */ -static struct bus_opp_table exynos4210_busclk_table[] = { - {LV_0, 400000, 1150000}, - {LV_1, 267000, 1050000}, - {LV_2, 133000, 1025000}, - {0, 0, 0}, -}; - -/* - * MIF is the main control knob clock for Exynos4x12 MIF/INT - * clock and voltage of both mif/int are controlled. - */ -static struct bus_opp_table exynos4x12_mifclk_table[] = { - {LV_0, 400000, 1100000}, - {LV_1, 267000, 1000000}, - {LV_2, 160000, 950000}, - {LV_3, 133000, 950000}, - {LV_4, 100000, 950000}, - {0, 0, 0}, -}; - -/* - * INT is not the control knob of 4x12. LV_x is not meant to represent - * the current performance. (MIF does) - */ -static struct bus_opp_table exynos4x12_intclk_table[] = { - {LV_0, 200000, 1000000}, - {LV_1, 160000, 950000}, - {LV_2, 133000, 925000}, - {LV_3, 100000, 900000}, - {0, 0, 0}, -}; - -/* TODO: asv volt definitions are "__initdata"? */ -/* Some chips have different operating voltages */ -static unsigned int exynos4210_asv_volt[][EX4210_LV_NUM] = { - {1150000, 1050000, 1050000}, - {1125000, 1025000, 1025000}, - {1100000, 1000000, 1000000}, - {1075000, 975000, 975000}, - {1050000, 950000, 950000}, -}; - -static unsigned int exynos4x12_mif_step_50[][EX4x12_LV_NUM] = { - /* 400 267 160 133 100 */ - {1050000, 950000, 900000, 900000, 900000}, /* ASV0 */ - {1050000, 950000, 900000, 900000, 900000}, /* ASV1 */ - {1050000, 950000, 900000, 900000, 900000}, /* ASV2 */ - {1050000, 900000, 900000, 900000, 900000}, /* ASV3 */ - {1050000, 900000, 900000, 900000, 850000}, /* ASV4 */ - {1050000, 900000, 900000, 850000, 850000}, /* ASV5 */ - {1050000, 900000, 850000, 850000, 850000}, /* ASV6 */ - {1050000, 900000, 850000, 850000, 850000}, /* ASV7 */ - {1050000, 900000, 850000, 850000, 850000}, /* ASV8 */ -}; - -static unsigned int exynos4x12_int_volt[][EX4x12_LV_NUM] = { - /* 200 160 133 100 */ - {1000000, 950000, 925000, 900000}, /* ASV0 */ - {975000, 925000, 925000, 900000}, /* ASV1 */ - {950000, 925000, 900000, 875000}, /* ASV2 */ - {950000, 900000, 900000, 875000}, /* ASV3 */ - {925000, 875000, 875000, 875000}, /* ASV4 */ - {900000, 850000, 850000, 850000}, /* ASV5 */ - {900000, 850000, 850000, 850000}, /* ASV6 */ - {900000, 850000, 850000, 850000}, /* ASV7 */ - {900000, 850000, 850000, 850000}, /* ASV8 */ -}; - -/*** Clock Divider Data for Exynos4210 ***/ -static unsigned int exynos4210_clkdiv_dmc0[][8] = { - /* - * Clock divider value for following - * { DIVACP, DIVACP_PCLK, DIVDPHY, DIVDMC, DIVDMCD - * DIVDMCP, DIVCOPY2, DIVCORE_TIMERS } - */ - - /* DMC L0: 400MHz */ - { 3, 1, 1, 1, 1, 1, 3, 1 }, - /* DMC L1: 266.7MHz */ - { 4, 1, 1, 2, 1, 1, 3, 1 }, - /* DMC L2: 133MHz */ - { 5, 1, 1, 5, 1, 1, 3, 1 }, -}; -static unsigned int exynos4210_clkdiv_top[][5] = { - /* - * Clock divider value for following - * { DIVACLK200, DIVACLK100, DIVACLK160, DIVACLK133, DIVONENAND } - */ - /* ACLK200 L0: 200MHz */ - { 3, 7, 4, 5, 1 }, - /* ACLK200 L1: 160MHz */ - { 4, 7, 5, 6, 1 }, - /* ACLK200 L2: 133MHz */ - { 5, 7, 7, 7, 1 }, -}; -static unsigned int exynos4210_clkdiv_lr_bus[][2] = { - /* - * Clock divider value for following - * { DIVGDL/R, DIVGPL/R } - */ - /* ACLK_GDL/R L1: 200MHz */ - { 3, 1 }, - /* ACLK_GDL/R L2: 160MHz */ - { 4, 1 }, - /* ACLK_GDL/R L3: 133MHz */ - { 5, 1 }, -}; - -/*** Clock Divider Data for Exynos4212/4412 ***/ -static unsigned int exynos4x12_clkdiv_dmc0[][6] = { - /* - * Clock divider value for following - * { DIVACP, DIVACP_PCLK, DIVDPHY, DIVDMC, DIVDMCD - * DIVDMCP} - */ - - /* DMC L0: 400MHz */ - {3, 1, 1, 1, 1, 1}, - /* DMC L1: 266.7MHz */ - {4, 1, 1, 2, 1, 1}, - /* DMC L2: 160MHz */ - {5, 1, 1, 4, 1, 1}, - /* DMC L3: 133MHz */ - {5, 1, 1, 5, 1, 1}, - /* DMC L4: 100MHz */ - {7, 1, 1, 7, 1, 1}, -}; -static unsigned int exynos4x12_clkdiv_dmc1[][6] = { - /* - * Clock divider value for following - * { G2DACP, DIVC2C, DIVC2C_ACLK } - */ - - /* DMC L0: 400MHz */ - {3, 1, 1}, - /* DMC L1: 266.7MHz */ - {4, 2, 1}, - /* DMC L2: 160MHz */ - {5, 4, 1}, - /* DMC L3: 133MHz */ - {5, 5, 1}, - /* DMC L4: 100MHz */ - {7, 7, 1}, -}; -static unsigned int exynos4x12_clkdiv_top[][5] = { - /* - * Clock divider value for following - * { DIVACLK266_GPS, DIVACLK100, DIVACLK160, - DIVACLK133, DIVONENAND } - */ - - /* ACLK_GDL/R L0: 200MHz */ - {2, 7, 4, 5, 1}, - /* ACLK_GDL/R L1: 200MHz */ - {2, 7, 4, 5, 1}, - /* ACLK_GDL/R L2: 160MHz */ - {4, 7, 5, 7, 1}, - /* ACLK_GDL/R L3: 133MHz */ - {4, 7, 5, 7, 1}, - /* ACLK_GDL/R L4: 100MHz */ - {7, 7, 7, 7, 1}, -}; -static unsigned int exynos4x12_clkdiv_lr_bus[][2] = { - /* - * Clock divider value for following - * { DIVGDL/R, DIVGPL/R } - */ - - /* ACLK_GDL/R L0: 200MHz */ - {3, 1}, - /* ACLK_GDL/R L1: 200MHz */ - {3, 1}, - /* ACLK_GDL/R L2: 160MHz */ - {4, 1}, - /* ACLK_GDL/R L3: 133MHz */ - {5, 1}, - /* ACLK_GDL/R L4: 100MHz */ - {7, 1}, -}; -static unsigned int exynos4x12_clkdiv_sclkip[][3] = { - /* - * Clock divider value for following - * { DIVMFC, DIVJPEG, DIVFIMC0~3} - */ - - /* SCLK_MFC: 200MHz */ - {3, 3, 4}, - /* SCLK_MFC: 200MHz */ - {3, 3, 4}, - /* SCLK_MFC: 160MHz */ - {4, 4, 5}, - /* SCLK_MFC: 133MHz */ - {5, 5, 5}, - /* SCLK_MFC: 100MHz */ - {7, 7, 7}, -}; - - -static int exynos4210_set_busclk(struct busfreq_data *data, - struct busfreq_opp_info *oppi) -{ - unsigned int index; - unsigned int tmp; - - for (index = LV_0; index < EX4210_LV_NUM; index++) - if (oppi->rate == exynos4210_busclk_table[index].clk) - break; - - if (index == EX4210_LV_NUM) - return -EINVAL; - - /* Change Divider - DMC0 */ - tmp = data->dmc_divtable[index]; - - __raw_writel(tmp, EXYNOS4_CLKDIV_DMC0); - - do { - tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_DMC0); - } while (tmp & 0x11111111); - - /* Change Divider - TOP */ - tmp = data->top_divtable[index]; - - __raw_writel(tmp, EXYNOS4_CLKDIV_TOP); - - do { - tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_TOP); - } while (tmp & 0x11111); - - /* Change Divider - LEFTBUS */ - tmp = __raw_readl(EXYNOS4_CLKDIV_LEFTBUS); - - tmp &= ~(EXYNOS4_CLKDIV_BUS_GDLR_MASK | EXYNOS4_CLKDIV_BUS_GPLR_MASK); - - tmp |= ((exynos4210_clkdiv_lr_bus[index][0] << - EXYNOS4_CLKDIV_BUS_GDLR_SHIFT) | - (exynos4210_clkdiv_lr_bus[index][1] << - EXYNOS4_CLKDIV_BUS_GPLR_SHIFT)); - - __raw_writel(tmp, EXYNOS4_CLKDIV_LEFTBUS); - - do { - tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_LEFTBUS); - } while (tmp & 0x11); - - /* Change Divider - RIGHTBUS */ - tmp = __raw_readl(EXYNOS4_CLKDIV_RIGHTBUS); - - tmp &= ~(EXYNOS4_CLKDIV_BUS_GDLR_MASK | EXYNOS4_CLKDIV_BUS_GPLR_MASK); - - tmp |= ((exynos4210_clkdiv_lr_bus[index][0] << - EXYNOS4_CLKDIV_BUS_GDLR_SHIFT) | - (exynos4210_clkdiv_lr_bus[index][1] << - EXYNOS4_CLKDIV_BUS_GPLR_SHIFT)); - - __raw_writel(tmp, EXYNOS4_CLKDIV_RIGHTBUS); - - do { - tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_RIGHTBUS); - } while (tmp & 0x11); - - return 0; -} - -static int exynos4x12_set_busclk(struct busfreq_data *data, - struct busfreq_opp_info *oppi) -{ - unsigned int index; - unsigned int tmp; - - for (index = LV_0; index < EX4x12_LV_NUM; index++) - if (oppi->rate == exynos4x12_mifclk_table[index].clk) - break; - - if (index == EX4x12_LV_NUM) - return -EINVAL; - - /* Change Divider - DMC0 */ - tmp = data->dmc_divtable[index]; - - __raw_writel(tmp, EXYNOS4_CLKDIV_DMC0); - - do { - tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_DMC0); - } while (tmp & 0x11111111); - - /* Change Divider - DMC1 */ - tmp = __raw_readl(EXYNOS4_CLKDIV_DMC1); - - tmp &= ~(EXYNOS4_CLKDIV_DMC1_G2D_ACP_MASK | - EXYNOS4_CLKDIV_DMC1_C2C_MASK | - EXYNOS4_CLKDIV_DMC1_C2CACLK_MASK); - - tmp |= ((exynos4x12_clkdiv_dmc1[index][0] << - EXYNOS4_CLKDIV_DMC1_G2D_ACP_SHIFT) | - (exynos4x12_clkdiv_dmc1[index][1] << - EXYNOS4_CLKDIV_DMC1_C2C_SHIFT) | - (exynos4x12_clkdiv_dmc1[index][2] << - EXYNOS4_CLKDIV_DMC1_C2CACLK_SHIFT)); - - __raw_writel(tmp, EXYNOS4_CLKDIV_DMC1); - - do { - tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_DMC1); - } while (tmp & 0x111111); - - /* Change Divider - TOP */ - tmp = __raw_readl(EXYNOS4_CLKDIV_TOP); - - tmp &= ~(EXYNOS4_CLKDIV_TOP_ACLK266_GPS_MASK | - EXYNOS4_CLKDIV_TOP_ACLK100_MASK | - EXYNOS4_CLKDIV_TOP_ACLK160_MASK | - EXYNOS4_CLKDIV_TOP_ACLK133_MASK | - EXYNOS4_CLKDIV_TOP_ONENAND_MASK); - - tmp |= ((exynos4x12_clkdiv_top[index][0] << - EXYNOS4_CLKDIV_TOP_ACLK266_GPS_SHIFT) | - (exynos4x12_clkdiv_top[index][1] << - EXYNOS4_CLKDIV_TOP_ACLK100_SHIFT) | - (exynos4x12_clkdiv_top[index][2] << - EXYNOS4_CLKDIV_TOP_ACLK160_SHIFT) | - (exynos4x12_clkdiv_top[index][3] << - EXYNOS4_CLKDIV_TOP_ACLK133_SHIFT) | - (exynos4x12_clkdiv_top[index][4] << - EXYNOS4_CLKDIV_TOP_ONENAND_SHIFT)); - - __raw_writel(tmp, EXYNOS4_CLKDIV_TOP); - - do { - tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_TOP); - } while (tmp & 0x11111); - - /* Change Divider - LEFTBUS */ - tmp = __raw_readl(EXYNOS4_CLKDIV_LEFTBUS); - - tmp &= ~(EXYNOS4_CLKDIV_BUS_GDLR_MASK | EXYNOS4_CLKDIV_BUS_GPLR_MASK); - - tmp |= ((exynos4x12_clkdiv_lr_bus[index][0] << - EXYNOS4_CLKDIV_BUS_GDLR_SHIFT) | - (exynos4x12_clkdiv_lr_bus[index][1] << - EXYNOS4_CLKDIV_BUS_GPLR_SHIFT)); - - __raw_writel(tmp, EXYNOS4_CLKDIV_LEFTBUS); - - do { - tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_LEFTBUS); - } while (tmp & 0x11); - - /* Change Divider - RIGHTBUS */ - tmp = __raw_readl(EXYNOS4_CLKDIV_RIGHTBUS); - - tmp &= ~(EXYNOS4_CLKDIV_BUS_GDLR_MASK | EXYNOS4_CLKDIV_BUS_GPLR_MASK); - - tmp |= ((exynos4x12_clkdiv_lr_bus[index][0] << - EXYNOS4_CLKDIV_BUS_GDLR_SHIFT) | - (exynos4x12_clkdiv_lr_bus[index][1] << - EXYNOS4_CLKDIV_BUS_GPLR_SHIFT)); - - __raw_writel(tmp, EXYNOS4_CLKDIV_RIGHTBUS); - - do { - tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_RIGHTBUS); - } while (tmp & 0x11); - - /* Change Divider - MFC */ - tmp = __raw_readl(EXYNOS4_CLKDIV_MFC); - - tmp &= ~(EXYNOS4_CLKDIV_MFC_MASK); - - tmp |= ((exynos4x12_clkdiv_sclkip[index][0] << - EXYNOS4_CLKDIV_MFC_SHIFT)); - - __raw_writel(tmp, EXYNOS4_CLKDIV_MFC); - - do { - tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_MFC); - } while (tmp & 0x1); - - /* Change Divider - JPEG */ - tmp = __raw_readl(EXYNOS4_CLKDIV_CAM1); - - tmp &= ~(EXYNOS4_CLKDIV_CAM1_JPEG_MASK); - - tmp |= ((exynos4x12_clkdiv_sclkip[index][1] << - EXYNOS4_CLKDIV_CAM1_JPEG_SHIFT)); - - __raw_writel(tmp, EXYNOS4_CLKDIV_CAM1); - - do { - tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_CAM1); - } while (tmp & 0x1); - - /* Change Divider - FIMC0~3 */ - tmp = __raw_readl(EXYNOS4_CLKDIV_CAM); - - tmp &= ~(EXYNOS4_CLKDIV_CAM_FIMC0_MASK | EXYNOS4_CLKDIV_CAM_FIMC1_MASK | - EXYNOS4_CLKDIV_CAM_FIMC2_MASK | EXYNOS4_CLKDIV_CAM_FIMC3_MASK); - - tmp |= ((exynos4x12_clkdiv_sclkip[index][2] << - EXYNOS4_CLKDIV_CAM_FIMC0_SHIFT) | - (exynos4x12_clkdiv_sclkip[index][2] << - EXYNOS4_CLKDIV_CAM_FIMC1_SHIFT) | - (exynos4x12_clkdiv_sclkip[index][2] << - EXYNOS4_CLKDIV_CAM_FIMC2_SHIFT) | - (exynos4x12_clkdiv_sclkip[index][2] << - EXYNOS4_CLKDIV_CAM_FIMC3_SHIFT)); - - __raw_writel(tmp, EXYNOS4_CLKDIV_CAM); - - do { - tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_CAM1); - } while (tmp & 0x1111); - - return 0; -} - -static int exynos4x12_get_intspec(unsigned long mifclk) -{ - int i = 0; - - while (exynos4x12_intclk_table[i].clk) { - if (exynos4x12_intclk_table[i].clk <= mifclk) - return i; - i++; - } - - return -EINVAL; -} - -static int exynos4_bus_setvolt(struct busfreq_data *data, - struct busfreq_opp_info *oppi, - struct busfreq_opp_info *oldoppi) -{ - int err = 0, tmp; - unsigned long volt = oppi->volt; - - switch (data->type) { - case TYPE_BUSF_EXYNOS4210: - /* OPP represents DMC clock + INT voltage */ - err = regulator_set_voltage(data->vdd_int, volt, - MAX_SAFEVOLT); - break; - case TYPE_BUSF_EXYNOS4x12: - /* OPP represents MIF clock + MIF voltage */ - err = regulator_set_voltage(data->vdd_mif, volt, - MAX_SAFEVOLT); - if (err) - break; - - tmp = exynos4x12_get_intspec(oppi->rate); - if (tmp < 0) { - err = tmp; - regulator_set_voltage(data->vdd_mif, - oldoppi->volt, - MAX_SAFEVOLT); - break; - } - err = regulator_set_voltage(data->vdd_int, - exynos4x12_intclk_table[tmp].volt, - MAX_SAFEVOLT); - /* Try to recover */ - if (err) - regulator_set_voltage(data->vdd_mif, - oldoppi->volt, - MAX_SAFEVOLT); - break; - default: - err = -EINVAL; - } - - return err; -} - -static int exynos4_bus_target(struct device *dev, unsigned long *_freq, - u32 flags) -{ - int err = 0; - struct platform_device *pdev = container_of(dev, struct platform_device, - dev); - struct busfreq_data *data = platform_get_drvdata(pdev); - struct dev_pm_opp *opp; - unsigned long freq; - unsigned long old_freq = data->curr_oppinfo.rate; - struct busfreq_opp_info new_oppinfo; - - rcu_read_lock(); - opp = devfreq_recommended_opp(dev, _freq, flags); - if (IS_ERR(opp)) { - rcu_read_unlock(); - return PTR_ERR(opp); - } - new_oppinfo.rate = dev_pm_opp_get_freq(opp); - new_oppinfo.volt = dev_pm_opp_get_voltage(opp); - rcu_read_unlock(); - freq = new_oppinfo.rate; - - if (old_freq == freq) - return 0; - - dev_dbg(dev, "targeting %lukHz %luuV\n", freq, new_oppinfo.volt); - - mutex_lock(&data->lock); - - if (data->disabled) - goto out; - - if (old_freq < freq) - err = exynos4_bus_setvolt(data, &new_oppinfo, - &data->curr_oppinfo); - if (err) - goto out; - - if (old_freq != freq) { - switch (data->type) { - case TYPE_BUSF_EXYNOS4210: - err = exynos4210_set_busclk(data, &new_oppinfo); - break; - case TYPE_BUSF_EXYNOS4x12: - err = exynos4x12_set_busclk(data, &new_oppinfo); - break; - default: - err = -EINVAL; - } - } - if (err) - goto out; - - if (old_freq > freq) - err = exynos4_bus_setvolt(data, &new_oppinfo, - &data->curr_oppinfo); - if (err) - goto out; - - data->curr_oppinfo = new_oppinfo; -out: - mutex_unlock(&data->lock); - return err; -} - -static int exynos4_bus_get_dev_status(struct device *dev, - struct devfreq_dev_status *stat) -{ - struct busfreq_data *data = dev_get_drvdata(dev); - struct busfreq_ppmu_data *ppmu_data = &data->ppmu_data; - int busier; - - exynos_read_ppmu(ppmu_data); - busier = exynos_get_busier_ppmu(ppmu_data); - stat->current_frequency = data->curr_oppinfo.rate; - - /* Number of cycles spent on memory access */ - stat->busy_time = ppmu_data->ppmu[busier].count[PPMU_PMNCNT3]; - stat->busy_time *= 100 / BUS_SATURATION_RATIO; - stat->total_time = ppmu_data->ppmu[busier].ccnt; - - /* If the counters have overflown, retry */ - if (ppmu_data->ppmu[busier].ccnt_overflow || - ppmu_data->ppmu[busier].count_overflow[0]) - return -EAGAIN; - - return 0; -} - -static struct devfreq_dev_profile exynos4_devfreq_profile = { - .initial_freq = 400000, - .polling_ms = 50, - .target = exynos4_bus_target, - .get_dev_status = exynos4_bus_get_dev_status, -}; - -static int exynos4210_init_tables(struct busfreq_data *data) -{ - u32 tmp; - int mgrp; - int i, err = 0; - - tmp = __raw_readl(EXYNOS4_CLKDIV_DMC0); - for (i = LV_0; i < EX4210_LV_NUM; i++) { - tmp &= ~(EXYNOS4_CLKDIV_DMC0_ACP_MASK | - EXYNOS4_CLKDIV_DMC0_ACPPCLK_MASK | - EXYNOS4_CLKDIV_DMC0_DPHY_MASK | - EXYNOS4_CLKDIV_DMC0_DMC_MASK | - EXYNOS4_CLKDIV_DMC0_DMCD_MASK | - EXYNOS4_CLKDIV_DMC0_DMCP_MASK | - EXYNOS4_CLKDIV_DMC0_COPY2_MASK | - EXYNOS4_CLKDIV_DMC0_CORETI_MASK); - - tmp |= ((exynos4210_clkdiv_dmc0[i][0] << - EXYNOS4_CLKDIV_DMC0_ACP_SHIFT) | - (exynos4210_clkdiv_dmc0[i][1] << - EXYNOS4_CLKDIV_DMC0_ACPPCLK_SHIFT) | - (exynos4210_clkdiv_dmc0[i][2] << - EXYNOS4_CLKDIV_DMC0_DPHY_SHIFT) | - (exynos4210_clkdiv_dmc0[i][3] << - EXYNOS4_CLKDIV_DMC0_DMC_SHIFT) | - (exynos4210_clkdiv_dmc0[i][4] << - EXYNOS4_CLKDIV_DMC0_DMCD_SHIFT) | - (exynos4210_clkdiv_dmc0[i][5] << - EXYNOS4_CLKDIV_DMC0_DMCP_SHIFT) | - (exynos4210_clkdiv_dmc0[i][6] << - EXYNOS4_CLKDIV_DMC0_COPY2_SHIFT) | - (exynos4210_clkdiv_dmc0[i][7] << - EXYNOS4_CLKDIV_DMC0_CORETI_SHIFT)); - - data->dmc_divtable[i] = tmp; - } - - tmp = __raw_readl(EXYNOS4_CLKDIV_TOP); - for (i = LV_0; i < EX4210_LV_NUM; i++) { - tmp &= ~(EXYNOS4_CLKDIV_TOP_ACLK200_MASK | - EXYNOS4_CLKDIV_TOP_ACLK100_MASK | - EXYNOS4_CLKDIV_TOP_ACLK160_MASK | - EXYNOS4_CLKDIV_TOP_ACLK133_MASK | - EXYNOS4_CLKDIV_TOP_ONENAND_MASK); - - tmp |= ((exynos4210_clkdiv_top[i][0] << - EXYNOS4_CLKDIV_TOP_ACLK200_SHIFT) | - (exynos4210_clkdiv_top[i][1] << - EXYNOS4_CLKDIV_TOP_ACLK100_SHIFT) | - (exynos4210_clkdiv_top[i][2] << - EXYNOS4_CLKDIV_TOP_ACLK160_SHIFT) | - (exynos4210_clkdiv_top[i][3] << - EXYNOS4_CLKDIV_TOP_ACLK133_SHIFT) | - (exynos4210_clkdiv_top[i][4] << - EXYNOS4_CLKDIV_TOP_ONENAND_SHIFT)); - - data->top_divtable[i] = tmp; - } - - /* - * TODO: init tmp based on busfreq_data - * (device-tree or platform-data) - */ - tmp = 0; /* Max voltages for the reliability of the unknown */ - - pr_debug("ASV Group of Exynos4 is %d\n", tmp); - /* Use merged grouping for voltage */ - switch (tmp) { - case 0: - mgrp = 0; - break; - case 1: - case 2: - mgrp = 1; - break; - case 3: - case 4: - mgrp = 2; - break; - case 5: - case 6: - mgrp = 3; - break; - case 7: - mgrp = 4; - break; - default: - pr_warn("Unknown ASV Group. Use max voltage.\n"); - mgrp = 0; - } - - for (i = LV_0; i < EX4210_LV_NUM; i++) - exynos4210_busclk_table[i].volt = exynos4210_asv_volt[mgrp][i]; - - for (i = LV_0; i < EX4210_LV_NUM; i++) { - err = dev_pm_opp_add(data->dev, exynos4210_busclk_table[i].clk, - exynos4210_busclk_table[i].volt); - if (err) { - dev_err(data->dev, "Cannot add opp entries.\n"); - return err; - } - } - - - return 0; -} - -static int exynos4x12_init_tables(struct busfreq_data *data) -{ - unsigned int i; - unsigned int tmp; - int ret; - - /* Enable pause function for DREX2 DVFS */ - tmp = __raw_readl(EXYNOS4_DMC_PAUSE_CTRL); - tmp |= EXYNOS4_DMC_PAUSE_ENABLE; - __raw_writel(tmp, EXYNOS4_DMC_PAUSE_CTRL); - - tmp = __raw_readl(EXYNOS4_CLKDIV_DMC0); - - for (i = 0; i < EX4x12_LV_NUM; i++) { - tmp &= ~(EXYNOS4_CLKDIV_DMC0_ACP_MASK | - EXYNOS4_CLKDIV_DMC0_ACPPCLK_MASK | - EXYNOS4_CLKDIV_DMC0_DPHY_MASK | - EXYNOS4_CLKDIV_DMC0_DMC_MASK | - EXYNOS4_CLKDIV_DMC0_DMCD_MASK | - EXYNOS4_CLKDIV_DMC0_DMCP_MASK); - - tmp |= ((exynos4x12_clkdiv_dmc0[i][0] << - EXYNOS4_CLKDIV_DMC0_ACP_SHIFT) | - (exynos4x12_clkdiv_dmc0[i][1] << - EXYNOS4_CLKDIV_DMC0_ACPPCLK_SHIFT) | - (exynos4x12_clkdiv_dmc0[i][2] << - EXYNOS4_CLKDIV_DMC0_DPHY_SHIFT) | - (exynos4x12_clkdiv_dmc0[i][3] << - EXYNOS4_CLKDIV_DMC0_DMC_SHIFT) | - (exynos4x12_clkdiv_dmc0[i][4] << - EXYNOS4_CLKDIV_DMC0_DMCD_SHIFT) | - (exynos4x12_clkdiv_dmc0[i][5] << - EXYNOS4_CLKDIV_DMC0_DMCP_SHIFT)); - - data->dmc_divtable[i] = tmp; - } - - tmp = 0; /* Max voltages for the reliability of the unknown */ - - if (tmp > 8) - tmp = 0; - pr_debug("ASV Group of Exynos4x12 is %d\n", tmp); - - for (i = 0; i < EX4x12_LV_NUM; i++) { - exynos4x12_mifclk_table[i].volt = - exynos4x12_mif_step_50[tmp][i]; - exynos4x12_intclk_table[i].volt = - exynos4x12_int_volt[tmp][i]; - } - - for (i = 0; i < EX4x12_LV_NUM; i++) { - ret = dev_pm_opp_add(data->dev, exynos4x12_mifclk_table[i].clk, - exynos4x12_mifclk_table[i].volt); - if (ret) { - dev_err(data->dev, "Fail to add opp entries.\n"); - return ret; - } - } - - return 0; -} - -static int exynos4_busfreq_pm_notifier_event(struct notifier_block *this, - unsigned long event, void *ptr) -{ - struct busfreq_data *data = container_of(this, struct busfreq_data, - pm_notifier); - struct dev_pm_opp *opp; - struct busfreq_opp_info new_oppinfo; - unsigned long maxfreq = ULONG_MAX; - int err = 0; - - switch (event) { - case PM_SUSPEND_PREPARE: - /* Set Fastest and Deactivate DVFS */ - mutex_lock(&data->lock); - - data->disabled = true; - - rcu_read_lock(); - opp = dev_pm_opp_find_freq_floor(data->dev, &maxfreq); - if (IS_ERR(opp)) { - rcu_read_unlock(); - dev_err(data->dev, "%s: unable to find a min freq\n", - __func__); - mutex_unlock(&data->lock); - return PTR_ERR(opp); - } - new_oppinfo.rate = dev_pm_opp_get_freq(opp); - new_oppinfo.volt = dev_pm_opp_get_voltage(opp); - rcu_read_unlock(); - - err = exynos4_bus_setvolt(data, &new_oppinfo, - &data->curr_oppinfo); - if (err) - goto unlock; - - switch (data->type) { - case TYPE_BUSF_EXYNOS4210: - err = exynos4210_set_busclk(data, &new_oppinfo); - break; - case TYPE_BUSF_EXYNOS4x12: - err = exynos4x12_set_busclk(data, &new_oppinfo); - break; - default: - err = -EINVAL; - } - if (err) - goto unlock; - - data->curr_oppinfo = new_oppinfo; -unlock: - mutex_unlock(&data->lock); - if (err) - return err; - return NOTIFY_OK; - case PM_POST_RESTORE: - case PM_POST_SUSPEND: - /* Reactivate */ - mutex_lock(&data->lock); - data->disabled = false; - mutex_unlock(&data->lock); - return NOTIFY_OK; - } - - return NOTIFY_DONE; -} - -static int exynos4_busfreq_probe(struct platform_device *pdev) -{ - struct busfreq_data *data; - struct busfreq_ppmu_data *ppmu_data; - struct dev_pm_opp *opp; - struct device *dev = &pdev->dev; - int err = 0; - - data = devm_kzalloc(&pdev->dev, sizeof(struct busfreq_data), GFP_KERNEL); - if (data == NULL) { - dev_err(dev, "Cannot allocate memory.\n"); - return -ENOMEM; - } - - ppmu_data = &data->ppmu_data; - ppmu_data->ppmu_end = PPMU_END; - ppmu_data->ppmu = devm_kzalloc(dev, - sizeof(struct exynos_ppmu) * PPMU_END, - GFP_KERNEL); - if (!ppmu_data->ppmu) { - dev_err(dev, "Failed to allocate memory for exynos_ppmu\n"); - return -ENOMEM; - } - - data->type = pdev->id_entry->driver_data; - ppmu_data->ppmu[PPMU_DMC0].hw_base = S5P_VA_DMC0; - ppmu_data->ppmu[PPMU_DMC1].hw_base = S5P_VA_DMC1; - data->pm_notifier.notifier_call = exynos4_busfreq_pm_notifier_event; - data->dev = dev; - mutex_init(&data->lock); - - switch (data->type) { - case TYPE_BUSF_EXYNOS4210: - err = exynos4210_init_tables(data); - break; - case TYPE_BUSF_EXYNOS4x12: - err = exynos4x12_init_tables(data); - break; - default: - dev_err(dev, "Cannot determine the device id %d\n", data->type); - err = -EINVAL; - } - if (err) { - dev_err(dev, "Cannot initialize busfreq table %d\n", - data->type); - return err; - } - - data->vdd_int = devm_regulator_get(dev, "vdd_int"); - if (IS_ERR(data->vdd_int)) { - dev_err(dev, "Cannot get the regulator \"vdd_int\"\n"); - return PTR_ERR(data->vdd_int); - } - if (data->type == TYPE_BUSF_EXYNOS4x12) { - data->vdd_mif = devm_regulator_get(dev, "vdd_mif"); - if (IS_ERR(data->vdd_mif)) { - dev_err(dev, "Cannot get the regulator \"vdd_mif\"\n"); - return PTR_ERR(data->vdd_mif); - } - } - - rcu_read_lock(); - opp = dev_pm_opp_find_freq_floor(dev, - &exynos4_devfreq_profile.initial_freq); - if (IS_ERR(opp)) { - rcu_read_unlock(); - dev_err(dev, "Invalid initial frequency %lu kHz.\n", - exynos4_devfreq_profile.initial_freq); - return PTR_ERR(opp); - } - data->curr_oppinfo.rate = dev_pm_opp_get_freq(opp); - data->curr_oppinfo.volt = dev_pm_opp_get_voltage(opp); - rcu_read_unlock(); - - platform_set_drvdata(pdev, data); - - data->devfreq = devm_devfreq_add_device(dev, &exynos4_devfreq_profile, - "simple_ondemand", NULL); - if (IS_ERR(data->devfreq)) - return PTR_ERR(data->devfreq); - - /* - * Start PPMU (Performance Profiling Monitoring Unit) to check - * utilization of each IP in the Exynos4 SoC. - */ - busfreq_mon_reset(ppmu_data); - - /* Register opp_notifier for Exynos4 busfreq */ - err = devm_devfreq_register_opp_notifier(dev, data->devfreq); - if (err < 0) { - dev_err(dev, "Failed to register opp notifier\n"); - return err; - } - - /* Register pm_notifier for Exynos4 busfreq */ - err = register_pm_notifier(&data->pm_notifier); - if (err) { - dev_err(dev, "Failed to setup pm notifier\n"); - return err; - } - - return 0; -} - -static int exynos4_busfreq_remove(struct platform_device *pdev) -{ - struct busfreq_data *data = platform_get_drvdata(pdev); - - /* Unregister all of notifier chain */ - unregister_pm_notifier(&data->pm_notifier); - - return 0; -} - -#ifdef CONFIG_PM_SLEEP -static int exynos4_busfreq_resume(struct device *dev) -{ - struct busfreq_data *data = dev_get_drvdata(dev); - struct busfreq_ppmu_data *ppmu_data = &data->ppmu_data; - - busfreq_mon_reset(ppmu_data); - return 0; -} -#endif - -static SIMPLE_DEV_PM_OPS(exynos4_busfreq_pm_ops, NULL, exynos4_busfreq_resume); - -static const struct platform_device_id exynos4_busfreq_id[] = { - { "exynos4210-busfreq", TYPE_BUSF_EXYNOS4210 }, - { "exynos4412-busfreq", TYPE_BUSF_EXYNOS4x12 }, - { "exynos4212-busfreq", TYPE_BUSF_EXYNOS4x12 }, - { }, -}; - -static struct platform_driver exynos4_busfreq_driver = { - .probe = exynos4_busfreq_probe, - .remove = exynos4_busfreq_remove, - .id_table = exynos4_busfreq_id, - .driver = { - .name = "exynos4-busfreq", - .pm = &exynos4_busfreq_pm_ops, - }, -}; - -static int __init exynos4_busfreq_init(void) -{ - return platform_driver_register(&exynos4_busfreq_driver); -} -late_initcall(exynos4_busfreq_init); - -static void __exit exynos4_busfreq_exit(void) -{ - platform_driver_unregister(&exynos4_busfreq_driver); -} -module_exit(exynos4_busfreq_exit); - -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("EXYNOS4 busfreq driver with devfreq framework"); -MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@samsung.com>"); diff --git a/drivers/devfreq/exynos/exynos4_bus.h b/drivers/devfreq/exynos/exynos4_bus.h deleted file mode 100644 index 94c73c18d28c..000000000000 --- a/drivers/devfreq/exynos/exynos4_bus.h +++ /dev/null @@ -1,110 +0,0 @@ -/* - * Copyright (c) 2013 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * EXYNOS4 BUS header - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __DEVFREQ_EXYNOS4_BUS_H -#define __DEVFREQ_EXYNOS4_BUS_H __FILE__ - -#include <mach/map.h> - -#define EXYNOS4_CLKDIV_LEFTBUS (S5P_VA_CMU + 0x04500) -#define EXYNOS4_CLKDIV_STAT_LEFTBUS (S5P_VA_CMU + 0x04600) - -#define EXYNOS4_CLKDIV_RIGHTBUS (S5P_VA_CMU + 0x08500) -#define EXYNOS4_CLKDIV_STAT_RIGHTBUS (S5P_VA_CMU + 0x08600) - -#define EXYNOS4_CLKDIV_TOP (S5P_VA_CMU + 0x0C510) -#define EXYNOS4_CLKDIV_CAM (S5P_VA_CMU + 0x0C520) -#define EXYNOS4_CLKDIV_MFC (S5P_VA_CMU + 0x0C528) - -#define EXYNOS4_CLKDIV_STAT_TOP (S5P_VA_CMU + 0x0C610) -#define EXYNOS4_CLKDIV_STAT_MFC (S5P_VA_CMU + 0x0C628) - |