diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/base/Kconfig | 77 | ||||
| -rw-r--r-- | drivers/media/common/videobuf2/videobuf2-dma-contig.c | 41 | ||||
| -rw-r--r-- | drivers/mfd/Kconfig | 3 | ||||
| -rw-r--r-- | drivers/of/Kconfig | 6 | ||||
| -rw-r--r-- | drivers/parisc/ccio-dma.c | 4 | ||||
| -rw-r--r-- | drivers/usb/host/ohci-sm501.c | 3 | ||||
| -rw-r--r-- | drivers/usb/host/ohci-tmio.c | 2 |
7 files changed, 19 insertions, 117 deletions
diff --git a/drivers/base/Kconfig b/drivers/base/Kconfig index 3e63a900b330..059700ea3521 100644 --- a/drivers/base/Kconfig +++ b/drivers/base/Kconfig @@ -191,83 +191,6 @@ config DMA_FENCE_TRACE lockup related problems for dma-buffers shared across multiple devices. -config DMA_CMA - bool "DMA Contiguous Memory Allocator" - depends on HAVE_DMA_CONTIGUOUS && CMA - help - This enables the Contiguous Memory Allocator which allows drivers - to allocate big physically-contiguous blocks of memory for use with - hardware components that do not support I/O map nor scatter-gather. - - You can disable CMA by specifying "cma=0" on the kernel's command - line. - - For more information see <include/linux/dma-contiguous.h>. - If unsure, say "n". - -if DMA_CMA -comment "Default contiguous memory area size:" - -config CMA_SIZE_MBYTES - int "Size in Mega Bytes" - depends on !CMA_SIZE_SEL_PERCENTAGE - default 0 if X86 - default 16 - help - Defines the size (in MiB) of the default memory area for Contiguous - Memory Allocator. If the size of 0 is selected, CMA is disabled by - default, but it can be enabled by passing cma=size[MG] to the kernel. - - -config CMA_SIZE_PERCENTAGE - int "Percentage of total memory" - depends on !CMA_SIZE_SEL_MBYTES - default 0 if X86 - default 10 - help - Defines the size of the default memory area for Contiguous Memory - Allocator as a percentage of the total memory in the system. - If 0 percent is selected, CMA is disabled by default, but it can be - enabled by passing cma=size[MG] to the kernel. - -choice - prompt "Selected region size" - default CMA_SIZE_SEL_MBYTES - -config CMA_SIZE_SEL_MBYTES - bool "Use mega bytes value only" - -config CMA_SIZE_SEL_PERCENTAGE - bool "Use percentage value only" - -config CMA_SIZE_SEL_MIN - bool "Use lower value (minimum)" - -config CMA_SIZE_SEL_MAX - bool "Use higher value (maximum)" - -endchoice - -config CMA_ALIGNMENT - int "Maximum PAGE_SIZE order of alignment for contiguous buffers" - range 4 12 - default 8 - help - DMA mapping framework by default aligns all buffers to the smallest - PAGE_SIZE order which is greater than or equal to the requested buffer - size. This works well for buffers up to a few hundreds kilobytes, but - for larger buffers it just a memory waste. With this parameter you can - specify the maximum PAGE_SIZE order for contiguous buffers. Larger - buffers will be aligned only to this specified order. The order is - expressed as a power of two multiplied by the PAGE_SIZE. - - For example, if your system defaults to 4KiB pages, the order value - of 8 means that the buffers will be aligned up to 1MiB only. - - If unsure, leave the default value "8". - -endif - config GENERIC_ARCH_TOPOLOGY bool help diff --git a/drivers/media/common/videobuf2/videobuf2-dma-contig.c b/drivers/media/common/videobuf2/videobuf2-dma-contig.c index aff0ab7bf83d..82389aead6ed 100644 --- a/drivers/media/common/videobuf2/videobuf2-dma-contig.c +++ b/drivers/media/common/videobuf2/videobuf2-dma-contig.c @@ -439,42 +439,14 @@ static void vb2_dc_put_userptr(void *buf_priv) set_page_dirty_lock(pages[i]); sg_free_table(sgt); kfree(sgt); + } else { + dma_unmap_resource(buf->dev, buf->dma_addr, buf->size, + buf->dma_dir, 0); } vb2_destroy_framevec(buf->vec); kfree(buf); } -/* - * For some kind of reserved memory there might be no struct page available, - * so all that can be done to support such 'pages' is to try to convert - * pfn to dma address or at the last resort just assume that - * dma address == physical address (like it has been assumed in earlier version - * of videobuf2-dma-contig - */ - -#ifdef __arch_pfn_to_dma -static inline dma_addr_t vb2_dc_pfn_to_dma(struct device *dev, unsigned long pfn) -{ - return (dma_addr_t)__arch_pfn_to_dma(dev, pfn); -} -#elif defined(__pfn_to_bus) -static inline dma_addr_t vb2_dc_pfn_to_dma(struct device *dev, unsigned long pfn) -{ - return (dma_addr_t)__pfn_to_bus(pfn); -} -#elif defined(__pfn_to_phys) -static inline dma_addr_t vb2_dc_pfn_to_dma(struct device *dev, unsigned long pfn) -{ - return (dma_addr_t)__pfn_to_phys(pfn); -} -#else -static inline dma_addr_t vb2_dc_pfn_to_dma(struct device *dev, unsigned long pfn) -{ - /* really, we cannot do anything better at this point */ - return (dma_addr_t)(pfn) << PAGE_SHIFT; -} -#endif - static void *vb2_dc_get_userptr(struct device *dev, unsigned long vaddr, unsigned long size, enum dma_data_direction dma_dir) { @@ -528,7 +500,12 @@ static void *vb2_dc_get_userptr(struct device *dev, unsigned long vaddr, for (i = 1; i < n_pages; i++) if (nums[i-1] + 1 != nums[i]) goto fail_pfnvec; - buf->dma_addr = vb2_dc_pfn_to_dma(buf->dev, nums[0]); + buf->dma_addr = dma_map_resource(buf->dev, + __pfn_to_phys(nums[0]), size, buf->dma_dir, 0); + if (dma_mapping_error(buf->dev, buf->dma_addr)) { + ret = -ENOMEM; + goto fail_pfnvec; + } goto out; } diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index ad8b1f400919..0ce2d8dfc5f1 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -1065,6 +1065,8 @@ config MFD_SI476X_CORE config MFD_SM501 tristate "Silicon Motion SM501" + depends on HAS_DMA + select DMA_DECLARE_COHERENT ---help--- This is the core driver for the Silicon Motion SM501 multimedia companion chip. This device is a multifunction device which may @@ -1674,6 +1676,7 @@ config MFD_TC6393XB select GPIOLIB select MFD_CORE select MFD_TMIO + select DMA_DECLARE_COHERENT help Support for Toshiba Mobile IO Controller TC6393XB diff --git a/drivers/of/Kconfig b/drivers/of/Kconfig index ad3fcad4d75b..37c2ccbefecd 100644 --- a/drivers/of/Kconfig +++ b/drivers/of/Kconfig @@ -43,6 +43,7 @@ config OF_FLATTREE config OF_EARLY_FLATTREE bool + select DMA_DECLARE_COHERENT if HAS_DMA select OF_FLATTREE config OF_PROMTREE @@ -81,10 +82,9 @@ config OF_MDIO OpenFirmware MDIO bus (Ethernet PHY) accessors config OF_RESERVED_MEM - depends on OF_EARLY_FLATTREE bool - help - Helpers to allow for reservation of memory regions + depends on OF_EARLY_FLATTREE + default y if DMA_DECLARE_COHERENT || DMA_CMA config OF_RESOLVE bool diff --git a/drivers/parisc/ccio-dma.c b/drivers/parisc/ccio-dma.c index 097b0d43d13c..8937ba70d817 100644 --- a/drivers/parisc/ccio-dma.c +++ b/drivers/parisc/ccio-dma.c @@ -712,8 +712,8 @@ ccio_dma_supported(struct device *dev, u64 mask) return 0; } - /* only support 32-bit devices (ie PCI/GSC) */ - return (int)(mask == 0xffffffffUL); + /* only support 32-bit or better devices (ie PCI/GSC) */ + return (int)(mask >= 0xffffffffUL); } /** diff --git a/drivers/usb/host/ohci-sm501.c b/drivers/usb/host/ohci-sm501.c index c9233cddf9a2..c26228c25f99 100644 --- a/drivers/usb/host/ohci-sm501.c +++ b/drivers/usb/host/ohci-sm501.c @@ -126,8 +126,7 @@ static int ohci_hcd_sm501_drv_probe(struct platform_device *pdev) retval = dma_declare_coherent_memory(dev, mem->start, mem->start - mem->parent->start, - resource_size(mem), - DMA_MEMORY_EXCLUSIVE); + resource_size(mem)); if (retval) { dev_err(dev, "cannot declare coherent memory\n"); goto err1; diff --git a/drivers/usb/host/ohci-tmio.c b/drivers/usb/host/ohci-tmio.c index a631dbb369d7..f88a0370659f 100644 --- a/drivers/usb/host/ohci-tmio.c +++ b/drivers/usb/host/ohci-tmio.c @@ -225,7 +225,7 @@ static int ohci_hcd_tmio_drv_probe(struct platform_device *dev) } ret = dma_declare_coherent_memory(&dev->dev, sram->start, sram->start, - resource_size(sram), DMA_MEMORY_EXCLUSIVE); + resource_size(sram)); if (ret) goto err_dma_declare; |