diff options
Diffstat (limited to 'drivers')
26 files changed, 444 insertions, 35 deletions
diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig index 8d8a00e5a30e..02ce9cff5fcf 100644 --- a/drivers/i2c/Kconfig +++ b/drivers/i2c/Kconfig @@ -61,6 +61,16 @@ config I2C_HELPER_AUTO In doubt, say Y. +config I2C_SMBUS + tristate "SMBus-specific protocols" if !I2C_HELPER_AUTO + help + Say Y here if you want support for SMBus extensions to the I2C + specification. At the moment, the only supported extension is + the SMBus alert protocol. + + This support is also available as a module. If so, the module + will be called i2c-smbus. + source drivers/i2c/algos/Kconfig source drivers/i2c/busses/Kconfig source drivers/i2c/chips/Kconfig diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile index ba26e6cbe74e..acd0250c16a0 100644 --- a/drivers/i2c/Makefile +++ b/drivers/i2c/Makefile @@ -4,6 +4,7 @@ obj-$(CONFIG_I2C_BOARDINFO) += i2c-boardinfo.o obj-$(CONFIG_I2C) += i2c-core.o +obj-$(CONFIG_I2C_SMBUS) += i2c-smbus.o obj-$(CONFIG_I2C_CHARDEV) += i2c-dev.o obj-y += busses/ chips/ algos/ diff --git a/drivers/i2c/algos/i2c-algo-pca.c b/drivers/i2c/algos/i2c-algo-pca.c index 78d42aae0089..dcdaf8e675bf 100644 --- a/drivers/i2c/algos/i2c-algo-pca.c +++ b/drivers/i2c/algos/i2c-algo-pca.c @@ -453,8 +453,6 @@ static int pca_init(struct i2c_adapter *adap) */ int raise_fall_time; - struct i2c_algo_pca_data *pca_data = adap->algo_data; - /* Ignore the reset function from the module, * we can use the parallel bus reset */ diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 737f05200b1d..4cc3807bd31c 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -77,7 +77,7 @@ config I2C_AMD8111 will be called i2c-amd8111. config I2C_I801 - tristate "Intel 82801 (ICH)" + tristate "Intel 82801 (ICH/PCH)" depends on PCI help If you say yes to this option, support will be included for the Intel @@ -97,7 +97,8 @@ config I2C_I801 ICH9 Tolapai ICH10 - PCH + 3400/5 Series (PCH) + Cougar Point (PCH) This driver can also be built as a module. If so, the module will be called i2c-i801. @@ -580,6 +581,7 @@ config I2C_PARPORT tristate "Parallel port adapter" depends on PARPORT select I2C_ALGOBIT + select I2C_SMBUS help This supports parallel port I2C adapters such as the ones made by Philips or Velleman, Analog Devices evaluation boards, and more. @@ -603,6 +605,7 @@ config I2C_PARPORT config I2C_PARPORT_LIGHT tristate "Parallel port adapter (light)" select I2C_ALGOBIT + select I2C_SMBUS help This supports parallel port I2C adapters such as the ones made by Philips or Velleman, Analog Devices evaluation boards, and more. diff --git a/drivers/i2c/busses/i2c-ali1535.c b/drivers/i2c/busses/i2c-ali1535.c index 8de7d7b87bb0..bd8f1e4d9e6c 100644 --- a/drivers/i2c/busses/i2c-ali1535.c +++ b/drivers/i2c/busses/i2c-ali1535.c @@ -480,7 +480,7 @@ static struct i2c_adapter ali1535_adapter = { .algo = &smbus_algorithm, }; -static struct pci_device_id ali1535_ids[] = { +static const struct pci_device_id ali1535_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M7101) }, { }, }; diff --git a/drivers/i2c/busses/i2c-ali1563.c b/drivers/i2c/busses/i2c-ali1563.c index 4687af40dd50..a409cfcf0629 100644 --- a/drivers/i2c/busses/i2c-ali1563.c +++ b/drivers/i2c/busses/i2c-ali1563.c @@ -417,7 +417,7 @@ static void __devexit ali1563_remove(struct pci_dev * dev) ali1563_shutdown(dev); } -static struct pci_device_id __devinitdata ali1563_id_table[] = { +static const struct pci_device_id ali1563_id_table[] __devinitconst = { { PCI_DEVICE(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1563) }, {}, }; diff --git a/drivers/i2c/busses/i2c-ali15x3.c b/drivers/i2c/busses/i2c-ali15x3.c index e7e3205f1286..659f63f5e4af 100644 --- a/drivers/i2c/busses/i2c-ali15x3.c +++ b/drivers/i2c/busses/i2c-ali15x3.c @@ -477,7 +477,7 @@ static struct i2c_adapter ali15x3_adapter = { .algo = &smbus_algorithm, }; -static struct pci_device_id ali15x3_ids[] = { +static const struct pci_device_id ali15x3_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M7101) }, { 0, } }; diff --git a/drivers/i2c/busses/i2c-amd756.c b/drivers/i2c/busses/i2c-amd756.c index 8f0b90ef8c76..c5a9fa488e7f 100644 --- a/drivers/i2c/busses/i2c-amd756.c +++ b/drivers/i2c/busses/i2c-amd756.c @@ -308,7 +308,7 @@ static const char* chipname[] = { "nVidia nForce", "AMD8111", }; -static struct pci_device_id amd756_ids[] = { +static const struct pci_device_id amd756_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VIPER_740B), .driver_data = AMD756 }, { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VIPER_7413), diff --git a/drivers/i2c/busses/i2c-amd8111.c b/drivers/i2c/busses/i2c-amd8111.c index 5b4ad86ca166..d0dc970d7370 100644 --- a/drivers/i2c/busses/i2c-amd8111.c +++ b/drivers/i2c/busses/i2c-amd8111.c @@ -351,7 +351,7 @@ static const struct i2c_algorithm smbus_algorithm = { }; -static struct pci_device_id amd8111_ids[] = { +static const struct pci_device_id amd8111_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_SMBUS2) }, { 0, } }; diff --git a/drivers/i2c/busses/i2c-hydra.c b/drivers/i2c/busses/i2c-hydra.c index bec9b845dd16..c767295ad1fb 100644 --- a/drivers/i2c/busses/i2c-hydra.c +++ b/drivers/i2c/busses/i2c-hydra.c @@ -105,7 +105,7 @@ static struct i2c_adapter hydra_adap = { .algo_data = &hydra_bit_data, }; -static struct pci_device_id hydra_ids[] = { +static const struct pci_device_id hydra_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_HYDRA) }, { 0, } }; diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index df6ab553f975..9da5b05cdb52 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -41,7 +41,8 @@ Tolapai 0x5032 32 hard yes yes yes ICH10 0x3a30 32 hard yes yes yes ICH10 0x3a60 32 hard yes yes yes - PCH 0x3b30 32 hard yes yes yes + 3400/5 Series (PCH) 0x3b30 32 hard yes yes yes + Cougar Point (PCH) 0x1c22 32 hard yes yes yes Features supported by this driver: Software PEC no @@ -561,7 +562,7 @@ static struct i2c_adapter i801_adapter = { .algo = &smbus_algorithm, }; -static struct pci_device_id i801_ids[] = { +static const struct pci_device_id i801_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_3) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AB_3) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_2) }, @@ -578,6 +579,7 @@ static struct pci_device_id i801_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_4) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_5) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PCH_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CPT_SMBUS) }, { 0, } }; @@ -707,6 +709,7 @@ static int __devinit i801_probe(struct pci_dev *dev, const struct pci_device_id case PCI_DEVICE_ID_INTEL_ICH10_4: case PCI_DEVICE_ID_INTEL_ICH10_5: case PCI_DEVICE_ID_INTEL_PCH_SMBUS: + case PCI_DEVICE_ID_INTEL_CPT_SMBUS: i801_features |= FEATURE_I2C_BLOCK_READ; /* fall through */ case PCI_DEVICE_ID_INTEL_82801DB_3: diff --git a/drivers/i2c/busses/i2c-isch.c b/drivers/i2c/busses/i2c-isch.c index dba6eb053e2f..69c22f79f231 100644 --- a/drivers/i2c/busses/i2c-isch.c +++ b/drivers/i2c/busses/i2c-isch.c @@ -256,7 +256,7 @@ static struct i2c_adapter sch_adapter = { .algo = &smbus_algorithm, }; -static struct pci_device_id sch_ids[] = { +static const struct pci_device_id sch_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SCH_LPC) }, { 0, } }; diff --git a/drivers/i2c/busses/i2c-nforce2.c b/drivers/i2c/busses/i2c-nforce2.c index ec11d1c4e77b..4a700587ef18 100644 --- a/drivers/i2c/busses/i2c-nforce2.c +++ b/drivers/i2c/busses/i2c-nforce2.c @@ -308,7 +308,7 @@ static struct i2c_algorithm smbus_algorithm = { }; -static struct pci_device_id nforce2_ids[] = { +static const struct pci_device_id nforce2_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2_SMBUS) }, { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2S_SMBUS) }, { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3_SMBUS) }, diff --git a/drivers/i2c/busses/i2c-parport-light.c b/drivers/i2c/busses/i2c-parport-light.c index 322c5691e38e..5f41ec0f72d2 100644 --- a/drivers/i2c/busses/i2c-parport-light.c +++ b/drivers/i2c/busses/i2c-parport-light.c @@ -1,7 +1,7 @@ /* ------------------------------------------------------------------------ * * i2c-parport-light.c I2C bus over parallel port * * ------------------------------------------------------------------------ * - Copyright (C) 2003-2007 Jean Delvare <khali@linux-fr.org> + Copyright (C) 2003-2010 Jean Delvare <khali@linux-fr.org> Based on older i2c-velleman.c driver Copyright (C) 1995-2000 Simon G. Vogl @@ -27,10 +27,12 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/init.h> +#include <linux/delay.h> #include <linux/platform_device.h> #include <linux/ioport.h> #include <linux/i2c.h> #include <linux/i2c-algo-bit.h> +#include <linux/i2c-smbus.h> #include <asm/io.h> #include "i2c-parport.h" @@ -43,6 +45,10 @@ static u16 base; module_param(base, ushort, 0); MODULE_PARM_DESC(base, "Base I/O address"); +static int irq; +module_param(irq, int, 0); +MODULE_PARM_DESC(irq, "IRQ (optional)"); + /* ----- Low-level parallel port access ----------------------------------- */ static inline void port_write(unsigned char p, unsigned char d) @@ -119,6 +125,16 @@ static struct i2c_adapter parport_adapter = { .name = "Parallel port adapter (light)", }; +/* SMBus alert support */ +static struct i2c_smbus_alert_setup alert_data = { + .alert_edge_triggered = 1, +}; +static struct i2c_client *ara; +static struct lineop parport_ctrl_irq = { + .val = (1 << 4), + .port = CTRL, +}; + static int __devinit i2c_parport_probe(struct platform_device *pdev) { int err; @@ -127,18 +143,39 @@ static int __devinit i2c_parport_probe(struct platform_device *pdev) parport_setsda(NULL, 1); parport_setscl(NULL, 1); /* Other init if needed (power on...) */ - if (adapter_parm[type].init.val) + if (adapter_parm[type].init.val) { line_set(1, &adapter_parm[type].init); + /* Give powered devices some time to settle */ + msleep(100); + } parport_adapter.dev.parent = &pdev->dev; err = i2c_bit_add_bus(&parport_adapter); - if (err) + if (err) { dev_err(&pdev->dev, "Unable to register with I2C\n"); - return err; + return err; + } + + /* Setup SMBus alert if supported */ + if (adapter_parm[type].smbus_alert && irq) { + alert_data.irq = irq; + ara = i2c_setup_smbus_alert(&parport_adapter, &alert_data); + if (ara) + line_set(1, &parport_ctrl_irq); + else + dev_warn(&pdev->dev, "Failed to register ARA client\n"); + } + + return 0; } static int __devexit i2c_parport_remove(struct platform_device *pdev) { + if (ara) { + line_set(0, &parport_ctrl_irq); + i2c_unregister_device(ara); + ara = NULL; + } i2c_del_adapter(&parport_adapter); /* Un-init if needed (power off...) */ @@ -205,6 +242,9 @@ static int __init i2c_parport_init(void) if (!request_region(base, 3, DRVNAME)) return -EBUSY; + if (irq != 0) + pr_info(DRVNAME ": using irq %d\n", irq); + if (!adapter_parm[type].getscl.val) parport_algo_data.getscl = NULL; diff --git a/drivers/i2c/busses/i2c-parport.c b/drivers/i2c/busses/i2c-parport.c index 0d8998610c74..220fca7f23a6 100644 --- a/drivers/i2c/busses/i2c-parport.c +++ b/drivers/i2c/busses/i2c-parport.c @@ -1,7 +1,7 @@ /* ------------------------------------------------------------------------ * * i2c-parport.c I2C bus over parallel port * * ------------------------------------------------------------------------ * - Copyright (C) 2003-2007 Jean Delvare <khali@linux-fr.org> + Copyright (C) 2003-2010 Jean Delvare <khali@linux-fr.org> Based on older i2c-philips-par.c driver Copyright (C) 1995-2000 Simon G. Vogl @@ -27,9 +27,11 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/init.h> +#include <linux/delay.h> #include <linux/parport.h> #include <linux/i2c.h> #include <linux/i2c-algo-bit.h> +#include <linux/i2c-smbus.h> #include "i2c-parport.h" /* ----- Device list ------------------------------------------------------ */ @@ -38,6 +40,8 @@ struct i2c_par { struct pardevice *pdev; struct i2c_adapter adapter; struct i2c_algo_bit_data algo_data; + struct i2c_smbus_alert_setup alert_data; + struct i2c_client *ara; struct i2c_par *next; }; @@ -143,6 +147,19 @@ static struct i2c_algo_bit_data parport_algo_data = { /* ----- I2c and parallel port call-back functions and structures --------- */ +void i2c_parport_irq(void *data) +{ + struct i2c_par *adapter = data; + struct i2c_client *ara = adapter->ara; + + if (ara) { + dev_dbg(&ara->dev, "SMBus alert received\n"); + i2c_handle_smbus_alert(ara); + } else + dev_dbg(&adapter->adapter.dev, + "SMBus alert received but no ARA client!\n"); +} + static void i2c_parport_attach (struct parport *port) { struct i2c_par *adapter; @@ -154,8 +171,9 @@ static void i2c_parport_attach (struct parport *port) } pr_debug("i2c-parport: attaching to %s\n", port->name); + parport_disable_irq(port); adapter->pdev = parport_register_device(port, "i2c-parport", - NULL, NULL, NULL, PARPORT_FLAG_EXCL, NULL); + NULL, NULL, i2c_parport_irq, PARPORT_FLAG_EXCL, adapter); if (!adapter->pdev) { printk(KERN_ERR "i2c-parport: Unable to register with parport\n"); goto ERROR0; @@ -185,14 +203,29 @@ static void i2c_parport_attach (struct parport *port) parport_setsda(port, 1); parport_setscl(port, 1); /* Other init if needed (power on...) */ - if (adapter_parm[type].init.val) + if (adapter_parm[type].init.val) { line_set(port, 1, &adapter_parm[type].init); + /* Give powered devices some time to settle */ + msleep(100); + } if (i2c_bit_add_bus(&adapter->adapter) < 0) { printk(KERN_ERR "i2c-parport: Unable to register with I2C\n"); goto ERROR1; } + /* Setup SMBus alert if supported */ + if (adapter_parm[type].smbus_alert) { + adapter->alert_data.alert_edge_triggered = 1; + adapter->ara = i2c_setup_smbus_alert(&adapter->adapter, + &adapter->alert_data); + if (adapter->ara) + parport_enable_irq(port); + else + printk(KERN_WARNING "i2c-parport: Failed to register " + "ARA client\n"); + } + /* Add the new adapter to the list */ adapter->next = adapter_list; adapter_list = adapter; @@ -213,6 +246,10 @@ static void i2c_parport_detach (struct parport *port) for (prev = NULL, adapter = adapter_list; adapter; prev = adapter, adapter = adapter->next) { if (adapter->pdev->port == port) { + if (adapter->ara) { + parport_disable_irq(port); + i2c_unregister_device(adapter->ara); + } i2c_del_adapter(&adapter->adapter); /* Un-init if needed (power off...) */ diff --git a/drivers/i2c/busses/i2c-parport.h b/drivers/i2c/busses/i2c-parport.h index ed69d846cb95..a9f66816546c 100644 --- a/drivers/i2c/busses/i2c-parport.h +++ b/drivers/i2c/busses/i2c-parport.h @@ -1,7 +1,7 @@ /* ------------------------------------------------------------------------ * * i2c-parport.h I2C bus over parallel port * * ------------------------------------------------------------------------ * - Copyright (C) 2003-2004 Jean Delvare <khali@linux-fr.org> + Copyright (C) 2003-2010 Jean Delvare <khali@linux-fr.org> This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by @@ -38,6 +38,7 @@ struct adapter_parm { struct lineop getsda; struct lineop getscl; struct lineop init; + unsigned int smbus_alert:1; }; static struct adapter_parm adapter_parm[] = { @@ -73,6 +74,7 @@ static struct adapter_parm adapter_parm[] = { .setscl = { 0x01, DATA, 1 }, .getsda = { 0x10, STAT, 1 }, .init = { 0xf0, DATA, 0 }, + .smbus_alert = 1, }, /* type 5: ADM1025, ADM1030 and ADM1031 evaluation boards */ { diff --git a/drivers/i2c/busses/i2c-pasemi.c b/drivers/i2c/busses/i2c-pasemi.c index adf0fbb902f0..0d20ff46a518 100644 --- a/drivers/i2c/busses/i2c-pasemi.c +++ b/drivers/i2c/busses/i2c-pasemi.c @@ -400,7 +400,7 @@ static void __devexit pasemi_smb_remove(struct pci_dev *dev) kfree(smbus); } -static struct pci_device_id pasemi_smb_ids[] = { +static const struct pci_device_id pasemi_smb_ids[] = { { PCI_DEVICE(0x1959, 0xa003) }, { 0, } }; diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c index e56e4b6823ca..ee9da6fcf69a 100644 --- a/drivers/i2c/busses/i2c-piix4.c +++ b/drivers/i2c/busses/i2c-piix4.c @@ -472,7 +472,7 @@ static struct i2c_adapter piix4_adapter = { .algo = &smbus_algorithm, }; -static struct pci_device_id piix4_ids[] = { +static const struct pci_device_id piix4_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443MX_3) }, { PCI_DEVICE(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_3) }, diff --git a/drivers/i2c/busses/i2c-sis5595.c b/drivers/i2c/busses/i2c-sis5595.c index 844569f7d8b7..55a71370c79b 100644 --- a/drivers/i2c/busses/i2c-sis5595.c +++ b/drivers/i2c/busses/i2c-sis5595.c @@ -369,7 +369,7 @@ static struct i2c_adapter sis5595_adapter = { .algo = &smbus_algorithm, }; -static struct pci_device_id sis5595_ids[] __devinitdata = { +static const struct pci_device_id sis5595_ids[] __devinitconst = { { PCI_DEVICE(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503) }, { 0, } }; diff --git a/drivers/i2c/busses/i2c-sis630.c b/drivers/i2c/busses/i2c-sis630.c index 68cff7af7013..2309c7f1bde2 100644 --- a/drivers/i2c/busses/i2c-sis630.c +++ b/drivers/i2c/busses/i2c-sis630.c @@ -468,7 +468,7 @@ static struct i2c_adapter sis630_adapter = { .algo = &smbus_algorithm, }; -static struct pci_device_id sis630_ids[] __devinitdata = { +static const struct pci_device_id sis630_ids[] __devinitconst = { { PCI_DEVICE(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503) }, { PCI_DEVICE(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_LPC) }, { 0, } diff --git a/drivers/i2c/busses/i2c-sis96x.c b/drivers/i2c/busses/i2c-sis96x.c index 1649963b00dc..d43d8f8943dd 100644 --- a/drivers/i2c/busses/i2c-sis96x.c +++ b/drivers/i2c/busses/i2c-sis96x.c @@ -245,7 +245,7 @@ static struct i2c_adapter sis96x_adapter = { .algo = &smbus_algorithm, }; -static struct pci_device_id sis96x_ids[] = { +static const struct pci_device_id sis96x_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_SMBUS) }, { 0, } }; diff --git a/drivers/i2c/busses/i2c-tiny-usb.c b/drivers/i2c/busses/i2c-tiny-usb.c index e29b6d5ba8ef..b5b1bbf37d3c 100644 --- a/drivers/i2c/busses/i2c-tiny-usb.c +++ b/drivers/i2c/busses/i2c-tiny-usb.c @@ -31,11 +31,13 @@ #define CMD_I2C_IO_BEGIN (1<<0) #define CMD_I2C_IO_END (1<<1) -/* i2c bit delay, default is 10us -> 100kHz */ +/* i2c bit delay, default is 10us -> 100kHz max + (in practice, due to additional delays in the i2c bitbanging + code this results in a i2c clock of about 50kHz) */ static unsigned short delay = 10; module_param(delay, ushort, 0); -MODULE_PARM_DESC(delay, "bit delay in microseconds, " - "e.g. 10 for 100kHz (default is 100kHz)"); +MODULE_PARM_DESC(delay, "bit delay in microseconds " + "(default is 10us for 100kHz max)"); static int usb_read(struct i2c_adapter *adapter, int cmd, int value, int index, void *data, int len); @@ -137,7 +139,7 @@ static const struct i2c_algorithm usb_algorithm = { * Future Technology Devices International Ltd., later a pair was * bought from EZPrototypes */ -static struct usb_device_id i2c_tiny_usb_table [] = { +static const struct usb_device_id i2c_tiny_usb_table[] = { { USB_DEVICE(0x0403, 0xc631) }, /* FTDI */ { USB_DEVICE(0x1c40, 0x0534) }, /* EZPrototypes */ { } /* Terminating entry */ diff --git a/drivers/i2c/busses/i2c-via.c b/drivers/i2c/busses/i2c-via.c index 8b24f192103a..de78283bddbe 100644 --- a/drivers/i2c/busses/i2c-via.c +++ b/drivers/i2c/busses/i2c-via.c @@ -89,7 +89,7 @@ static struct i2c_adapter vt586b_adapter = { }; -static struct pci_device_id vt586b_ids[] __devinitdata = { +static const struct pci_device_id vt586b_ids[] __devinitconst = { { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3) }, { 0, } }; diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c index a84a909e1234..d57292e5dae0 100644 --- a/drivers/i2c/busses/i2c-viapro.c +++ b/drivers/i2c/busses/i2c-viapro.c @@ -444,7 +444,7 @@ release_region: return error; } -static struct pci_device_id vt596_ids[] = { +static const struct pci_device_id vt596_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C596_3), .driver_data = SMBBA1 }, { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C596B_3), diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index 10be7b5fbe97..3202a86f420e 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -34,6 +34,7 @@ #include <linux/hardirq.h> #include <linux/irqflags.h> #include <linux/rwsem.h> +#include <linux/pm_runtime.h> #include <asm/uaccess.h> #include "i2c-core.h" @@ -184,6 +185,52 @@ static int i2c_device_pm_resume(struct device *dev) #define i2c_device_pm_resume NULL #endif +#ifdef CONFIG_PM_RUNTIME +static int i2c_device_runtime_suspend(struct device *dev) +{ + const struct dev_pm_ops *pm; + + if (!dev->driver) + return 0; + pm = dev->driver->pm; + if (!pm || !pm->runtime_suspend) + return 0; + return pm->runtime_suspend(dev); +} + +static int i2c_device_runtime_resume(struct device *dev) +{ + const struct dev_pm_ops *pm; + + if (!dev->driver) + return 0; + pm = dev->driver->pm; + if (!pm || !pm->runtime_resume) + return 0; + return pm->runtime_resume(dev); +} + +static int i2c_device_runtime_idle(struct device *dev) +{ + const struct dev_pm_ops *pm = NULL; + int ret; + + if (dev->driver) + pm = dev->driver->pm; + if (pm && pm->runtime_idle) { + ret = pm->runtime_idle(dev); + if (ret) + return ret; + } + + return pm_runtime_suspend(dev); +} +#else +#define i2c_device_runtime_suspend NULL +#define i2c_device_runtime_resume NULL +#define i2c_device_runtime_idle NULL +#endif + static int i2c_device_suspend(struct device *dev, pm_message_t mesg) { struct i2c_client *client = i2c_verify_client(dev); @@ -251,6 +298,9 @@ static const struct attribute_group *i2c_dev_attr_groups[] = { static const struct dev_pm_ops i2c_device_pm_ops = { .suspend = i2c_device_pm_suspend, .resume = i2c_device_pm_resume, + .runtime_suspend = i2c_device_runtime_suspend, + .runtime_resume = i2c_device_runtime_resume, + .runtime_idle = i2c_device_runtime_idle, }; struct bus_type i2c_bus_type = { @@ -1133,7 +1183,7 @@ EXPORT_SYMBOL(i2c_transfer); * i2c_master_send - issue a single I2C message in master transmit mode * @client: Handle to slave device * @buf: Data that will be written to the slave - * @count: How many bytes to write + * @count: How many bytes to write, must be less than 64k since msg.len is u16 * * Returns negative errno, or else the number of bytes written. */ @@ -1160,7 +1210,7 @@ EXPORT_SYMBOL(i2c_master_send); * i2c_master_recv - issue a single I2C message in master receive mode * @client: Handle to slave device * @buf: Where to store data read from slave - * @count: How many bytes to read + * @count: How many bytes to read, must be less than 64k since msg.len is u16 * * Returns negative errno, or else the number of bytes read. */ diff --git a/drivers/i2c/i2c-smbus.c b/drivers/i2c/i2c-smbus.c new file mode 100644 index 000000000000..421278221243 --- /dev/null +++ b/drivers/i2c/i2c-smbus.c @@ -0,0 +1,263 @@ +/* + * i2c-smbus.c - SMBus extensions to the I2C protocol + * + * Copyright (C) 2008 David Brownell + * Copyright (C) 2010 Jean Delvare <khali@linux-fr.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/device.h> +#include <linux/semaphore.h> +#include <linux/interrupt.h> +#include <linux/workqueue.h> +#include <linux/i2c.h> +#include <linux/i2c-smbus.h> + +struct i2c_smbus_alert { + unsigned int alert_edge_triggered:1; + int irq; + struct work_struct alert; + struct i2c_client *ara; /* Alert response address */ +}; + +struct alert_data { + unsigned short addr; + u8 flag:1; +}; + +/* If this is the alerting device, notify its driver */ +static int smbus_do_alert(struct device *dev, void *addrp) +{ + struct i2c_client *client = i2c_verify_client(dev); + struct alert_data *data = addrp; + + if (!client || client->addr != data->addr) + return 0; + if (client->flags & I2C_CLIENT_TEN) + return 0; + + /* + * Drivers should either disable alerts, or provide at least + * a minimal handler. Lock so client->driver won't change. + */ + down(&dev->sem); + if (client->driver) { + if (client->driver->alert) + client->driver->alert(client, data->flag); + else + dev_warn(&client->dev, "no driver alert()!\n"); + } else + dev_dbg(&client->dev, "alert with no driver\n"); + up(&dev->sem); + + /* Stop iterating after we find the device */ + return -EBUSY; +} + +/* + * The alert IRQ handler needs to hand work off to a task which can issue + * SMBus calls, because those sleeping calls can't be made in IRQ context. + */ +static void smbus_alert(struct work_struct *work) +{ + struct i2c_smbus_alert *alert; + struct i2c_client *ara; + unsigned short prev_addr = 0; /* Not a valid address */ + + alert = container_of(work, struct i2c_smbus_alert, alert); + ara = alert->ara; + + for (;;) { + s32 status; + struct alert_data data; + + /* + * Devices with pending alerts reply in address order, low + * to high, because of slave transmit arbitration. After + * responding, an SMBus device stops asserting SMBALERT#. + * + * Note that SMBus 2.0 reserves 10-bit addresess for future + * use. We neither handle them, nor try to use PEC here. + */ + status = i2c_smbus_read_byte(ara); + if (status < 0) + break; + + data.flag = status & 1; + data.addr = status >> 1; + + if (data.addr == prev_addr) { + dev_warn(&ara->dev, "Duplicate SMBALERT# from dev " + "0x%02x, skipping\n", data.addr); + break; + } + dev_dbg(&ara->dev, "SMBALERT# from dev 0x%02x, flag %d\n", + data.addr, data.flag); + + /* Notify driver for the device which issued the alert */ + device_for_each_child(&ara->adapter->dev, &data, + smbus_do_alert); + prev_addr = data.addr; + } + + /* We handled all alerts; re-enable level-triggered IRQs */ + if (!alert->alert_edge_triggered) + enable_irq(alert->irq); +} + +static irqreturn_t smbalert_irq(int irq, void *d) |