diff options
Diffstat (limited to 'drivers')
36 files changed, 2706 insertions, 1267 deletions
diff --git a/drivers/hid/hid-sensor-hub.c b/drivers/hid/hid-sensor-hub.c index e244e449cbba..2ac25760a9a9 100644 --- a/drivers/hid/hid-sensor-hub.c +++ b/drivers/hid/hid-sensor-hub.c @@ -604,9 +604,9 @@ static int sensor_hub_probe(struct hid_device *hdev, ret = -EINVAL; goto err_stop_hw; } - sd->hid_sensor_hub_client_devs = kzalloc(dev_cnt * - sizeof(struct mfd_cell), - GFP_KERNEL); + sd->hid_sensor_hub_client_devs = devm_kzalloc(&hdev->dev, dev_cnt * + sizeof(struct mfd_cell), + GFP_KERNEL); if (sd->hid_sensor_hub_client_devs == NULL) { hid_err(hdev, "Failed to allocate memory for mfd cells\n"); ret = -ENOMEM; @@ -618,11 +618,12 @@ static int sensor_hub_probe(struct hid_device *hdev, if (collection->type == HID_COLLECTION_PHYSICAL) { - hsdev = kzalloc(sizeof(*hsdev), GFP_KERNEL); + hsdev = devm_kzalloc(&hdev->dev, sizeof(*hsdev), + GFP_KERNEL); if (!hsdev) { hid_err(hdev, "cannot allocate hid_sensor_hub_device\n"); ret = -ENOMEM; - goto err_no_mem; + goto err_stop_hw; } hsdev->hdev = hdev; hsdev->vendor_id = hdev->vendor; @@ -631,13 +632,13 @@ static int sensor_hub_probe(struct hid_device *hdev, if (last_hsdev) last_hsdev->end_collection_index = i; last_hsdev = hsdev; - name = kasprintf(GFP_KERNEL, "HID-SENSOR-%x", - collection->usage); + name = devm_kasprintf(&hdev->dev, GFP_KERNEL, + "HID-SENSOR-%x", + collection->usage); if (name == NULL) { hid_err(hdev, "Failed MFD device name\n"); ret = -ENOMEM; - kfree(hsdev); - goto err_no_mem; + goto err_stop_hw; } sd->hid_sensor_hub_client_devs[ sd->hid_sensor_client_cnt].id = @@ -661,16 +662,10 @@ static int sensor_hub_probe(struct hid_device *hdev, ret = mfd_add_devices(&hdev->dev, 0, sd->hid_sensor_hub_client_devs, sd->hid_sensor_client_cnt, NULL, 0, NULL); if (ret < 0) - goto err_no_mem; + goto err_stop_hw; return ret; -err_no_mem: - for (i = 0; i < sd->hid_sensor_client_cnt; ++i) { - kfree(sd->hid_sensor_hub_client_devs[i].name); - kfree(sd->hid_sensor_hub_client_devs[i].platform_data); - } - kfree(sd->hid_sensor_hub_client_devs); err_stop_hw: hid_hw_stop(hdev); @@ -681,7 +676,6 @@ static void sensor_hub_remove(struct hid_device *hdev) { struct sensor_hub_data *data = hid_get_drvdata(hdev); unsigned long flags; - int i; hid_dbg(hdev, " hardware removed\n"); hid_hw_close(hdev); @@ -691,11 +685,6 @@ static void sensor_hub_remove(struct hid_device *hdev) complete(&data->pending.ready); spin_unlock_irqrestore(&data->lock, flags); mfd_remove_devices(&hdev->dev); - for (i = 0; i < data->hid_sensor_client_cnt; ++i) { - kfree(data->hid_sensor_hub_client_devs[i].name); - kfree(data->hid_sensor_hub_client_devs[i].platform_data); - } - kfree(data->hid_sensor_hub_client_devs); hid_set_drvdata(hdev, NULL); mutex_destroy(&data->mutex); } diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig index 12addf272a61..5704d6bc2267 100644 --- a/drivers/iio/accel/Kconfig +++ b/drivers/iio/accel/Kconfig @@ -17,6 +17,19 @@ config BMA180 To compile this driver as a module, choose M here: the module will be called bma180. +config BMC150_ACCEL + tristate "Bosch BMC150 Accelerometer Driver" + depends on I2C + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + Say yes here to build support for the Bosch BMC150 accelerometer. + Currently this only supports the device via an i2c interface. + + This is a combo module with both accelerometer and magnetometer. + This driver is only implementing accelerometer part, which has + its own address and register map. + config HID_SENSOR_ACCEL_3D depends on HID_SENSOR_HUB select IIO_BUFFER diff --git a/drivers/iio/accel/Makefile b/drivers/iio/accel/Makefile index 6578ca1a8e09..a593996c6539 100644 --- a/drivers/iio/accel/Makefile +++ b/drivers/iio/accel/Makefile @@ -4,6 +4,7 @@ # When adding new entries keep the list in alphabetical order obj-$(CONFIG_BMA180) += bma180.o +obj-$(CONFIG_BMC150_ACCEL) += bmc150-accel.o obj-$(CONFIG_HID_SENSOR_ACCEL_3D) += hid-sensor-accel-3d.o obj-$(CONFIG_KXCJK1013) += kxcjk-1013.o obj-$(CONFIG_KXSD9) += kxsd9.o diff --git a/drivers/iio/accel/bmc150-accel.c b/drivers/iio/accel/bmc150-accel.c new file mode 100644 index 000000000000..23ae33496214 --- /dev/null +++ b/drivers/iio/accel/bmc150-accel.c @@ -0,0 +1,1307 @@ +/* + * BMC150 3-axis accelerometer driver + * Copyright (c) 2014, Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/slab.h> +#include <linux/acpi.h> +#include <linux/gpio/consumer.h> +#include <linux/pm.h> +#include <linux/pm_runtime.h> +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/buffer.h> +#include <linux/iio/events.h> +#include <linux/iio/trigger.h> +#include <linux/iio/trigger_consumer.h> +#include <linux/iio/triggered_buffer.h> + +#define BMC150_ACCEL_DRV_NAME "bmc150_accel" +#define BMC150_ACCEL_IRQ_NAME "bmc150_accel_event" +#define BMC150_ACCEL_GPIO_NAME "bmc150_accel_int" + +#define BMC150_ACCEL_REG_CHIP_ID 0x00 +#define BMC150_ACCEL_CHIP_ID_VAL 0xFA + +#define BMC150_ACCEL_REG_INT_STATUS_2 0x0B +#define BMC150_ACCEL_ANY_MOTION_MASK 0x07 +#define BMC150_ACCEL_ANY_MOTION_BIT_SIGN BIT(3) + +#define BMC150_ACCEL_REG_PMU_LPW 0x11 +#define BMC150_ACCEL_PMU_MODE_MASK 0xE0 +#define BMC150_ACCEL_PMU_MODE_SHIFT 5 +#define BMC150_ACCEL_PMU_BIT_SLEEP_DUR_MASK 0x17 +#define BMC150_ACCEL_PMU_BIT_SLEEP_DUR_SHIFT 1 + +#define BMC150_ACCEL_REG_PMU_RANGE 0x0F + +#define BMC150_ACCEL_DEF_RANGE_2G 0x03 +#define BMC150_ACCEL_DEF_RANGE_4G 0x05 +#define BMC150_ACCEL_DEF_RANGE_8G 0x08 +#define BMC150_ACCEL_DEF_RANGE_16G 0x0C + +/* Default BW: 125Hz */ +#define BMC150_ACCEL_REG_PMU_BW 0x10 +#define BMC150_ACCEL_DEF_BW 125 + +#define BMC150_ACCEL_REG_INT_MAP_0 0x19 +#define BMC150_ACCEL_INT_MAP_0_BIT_SLOPE BIT(2) + +#define BMC150_ACCEL_REG_INT_MAP_1 0x1A +#define BMC150_ACCEL_INT_MAP_1_BIT_DATA BIT(0) + +#define BMC150_ACCEL_REG_INT_RST_LATCH 0x21 +#define BMC150_ACCEL_INT_MODE_LATCH_RESET 0x80 +#define BMC150_ACCEL_INT_MODE_LATCH_INT 0x0F +#define BMC150_ACCEL_INT_MODE_NON_LATCH_INT 0x00 + +#define BMC150_ACCEL_REG_INT_EN_0 0x16 +#define BMC150_ACCEL_INT_EN_BIT_SLP_X BIT(0) +#define BMC150_ACCEL_INT_EN_BIT_SLP_Y BIT(1) +#define BMC150_ACCEL_INT_EN_BIT_SLP_Z BIT(2) + +#define BMC150_ACCEL_REG_INT_EN_1 0x17 +#define BMC150_ACCEL_INT_EN_BIT_DATA_EN BIT(4) + +#define BMC150_ACCEL_REG_INT_OUT_CTRL 0x20 +#define BMC150_ACCEL_INT_OUT_CTRL_INT1_LVL BIT(0) + +#define BMC150_ACCEL_REG_INT_5 0x27 +#define BMC150_ACCEL_SLOPE_DUR_MASK 0x03 + +#define BMC150_ACCEL_REG_INT_6 0x28 +#define BMC150_ACCEL_SLOPE_THRES_MASK 0xFF + +/* Slope duration in terms of number of samples */ +#define BMC150_ACCEL_DEF_SLOPE_DURATION 2 +/* in terms of multiples of g's/LSB, based on range */ +#define BMC150_ACCEL_DEF_SLOPE_THRESHOLD 5 + +#define BMC150_ACCEL_REG_XOUT_L 0x02 + +#define BMC150_ACCEL_MAX_STARTUP_TIME_MS 100 + +/* Sleep Duration values */ +#define BMC150_ACCEL_SLEEP_500_MICRO 0x05 +#define BMC150_ACCEL_SLEEP_1_MS 0x06 +#define BMC150_ACCEL_SLEEP_2_MS 0x07 +#define BMC150_ACCEL_SLEEP_4_MS 0x08 +#define BMC150_ACCEL_SLEEP_6_MS 0x09 +#define BMC150_ACCEL_SLEEP_10_MS 0x0A +#define BMC150_ACCEL_SLEEP_25_MS 0x0B +#define BMC150_ACCEL_SLEEP_50_MS 0x0C +#define BMC150_ACCEL_SLEEP_100_MS 0x0D +#define BMC150_ACCEL_SLEEP_500_MS 0x0E +#define BMC150_ACCEL_SLEEP_1_SEC 0x0F + +#define BMC150_ACCEL_REG_TEMP 0x08 +#define BMC150_ACCEL_TEMP_CENTER_VAL 24 + +#define BMC150_ACCEL_AXIS_TO_REG(axis) (BMC150_ACCEL_REG_XOUT_L + (axis * 2)) +#define BMC150_AUTO_SUSPEND_DELAY_MS 2000 + +enum bmc150_accel_axis { + AXIS_X, + AXIS_Y, + AXIS_Z, +}; + +enum bmc150_power_modes { + BMC150_ACCEL_SLEEP_MODE_NORMAL, + BMC150_ACCEL_SLEEP_MODE_DEEP_SUSPEND, + BMC150_ACCEL_SLEEP_MODE_LPM, + BMC150_ACCEL_SLEEP_MODE_SUSPEND = 0x04, +}; + +struct bmc150_accel_data { + struct i2c_client *client; + struct iio_trigger *dready_trig; + struct iio_trigger *motion_trig; + struct mutex mutex; + s16 buffer[8]; + u8 bw_bits; + u32 slope_dur; + u32 slope_thres; + u32 range; + int ev_enable_state; + bool dready_trigger_on; + bool motion_trigger_on; + int64_t timestamp; +}; + +static const struct { + int val; + int val2; + u8 bw_bits; +} bmc150_accel_samp_freq_table[] = { {7, 810000, 0x08}, + {15, 630000, 0x09}, + {31, 250000, 0x0A}, + {62, 500000, 0x0B}, + {125, 0, 0x0C}, + {250, 0, 0x0D}, + {500, 0, 0x0E}, + {1000, 0, 0x0F} }; + +static const struct { + int bw_bits; + int msec; +} bmc150_accel_sample_upd_time[] = { {0x08, 64}, + {0x09, 32}, + {0x0A, 16}, + {0x0B, 8}, + {0x0C, 4}, + {0x0D, 2}, + {0x0E, 1}, + {0x0F, 1} }; + +static const struct { + int scale; + int range; +} bmc150_accel_scale_table[] = { {9610, BMC150_ACCEL_DEF_RANGE_2G}, + {19122, BMC150_ACCEL_DEF_RANGE_4G}, + {38344, BMC150_ACCEL_DEF_RANGE_8G}, + {77057, BMC150_ACCEL_DEF_RANGE_16G} }; + +static const struct { + int sleep_dur; + int reg_value; +} bmc150_accel_sleep_value_table[] = { {0, 0}, + {500, BMC150_ACCEL_SLEEP_500_MICRO}, + {1000, BMC150_ACCEL_SLEEP_1_MS}, + {2000, BMC150_ACCEL_SLEEP_2_MS}, + {4000, BMC150_ACCEL_SLEEP_4_MS}, + {6000, BMC150_ACCEL_SLEEP_6_MS}, + {10000, BMC150_ACCEL_SLEEP_10_MS}, + {25000, BMC150_ACCEL_SLEEP_25_MS}, + {50000, BMC150_ACCEL_SLEEP_50_MS}, + {100000, BMC150_ACCEL_SLEEP_100_MS}, + {500000, BMC150_ACCEL_SLEEP_500_MS}, + {1000000, BMC150_ACCEL_SLEEP_1_SEC} }; + + +static int bmc150_accel_set_mode(struct bmc150_accel_data *data, + enum bmc150_power_modes mode, + int dur_us) +{ + int i; + int ret; + u8 lpw_bits; + int dur_val = -1; + + if (dur_us > 0) { + for (i = 0; i < ARRAY_SIZE(bmc150_accel_sleep_value_table); + ++i) { + if (bmc150_accel_sleep_value_table[i].sleep_dur == + dur_us) + dur_val = + bmc150_accel_sleep_value_table[i].reg_value; + } + } else + dur_val = 0; + + if (dur_val < 0) + return -EINVAL; + + lpw_bits = mode << BMC150_ACCEL_PMU_MODE_SHIFT; + lpw_bits |= (dur_val << BMC150_ACCEL_PMU_BIT_SLEEP_DUR_SHIFT); + + dev_dbg(&data->client->dev, "Set Mode bits %x\n", lpw_bits); + + ret = i2c_smbus_write_byte_data(data->client, + BMC150_ACCEL_REG_PMU_LPW, lpw_bits); + if (ret < 0) { + dev_err(&data->client->dev, "Error writing reg_pmu_lpw\n"); + return ret; + } + + return 0; +} + +static int bmc150_accel_set_bw(struct bmc150_accel_data *data, int val, + int val2) +{ + int i; + int ret; + + for (i = 0; i < ARRAY_SIZE(bmc150_accel_samp_freq_table); ++i) { + if (bmc150_accel_samp_freq_table[i].val == val && + bmc150_accel_samp_freq_table[i].val2 == val2) { + ret = i2c_smbus_write_byte_data( + data->client, + BMC150_ACCEL_REG_PMU_BW, + bmc150_accel_samp_freq_table[i].bw_bits); + if (ret < 0) + return ret; + + data->bw_bits = + bmc150_accel_samp_freq_table[i].bw_bits; + return 0; + } + } + + return -EINVAL; +} + +static int bmc150_accel_chip_init(struct bmc150_accel_data *data) +{ + int ret; + + ret = i2c_smbus_read_byte_data(data->client, BMC150_ACCEL_REG_CHIP_ID); + if (ret < 0) { + dev_err(&data->client->dev, + "Error: Reading chip id\n"); + return ret; + } + + dev_dbg(&data->client->dev, "Chip Id %x\n", ret); + if (ret != BMC150_ACCEL_CHIP_ID_VAL) { + dev_err(&data->client->dev, "Invalid chip %x\n", ret); + return -ENODEV; + } + + ret = bmc150_accel_set_mode(data, BMC150_ACCEL_SLEEP_MODE_NORMAL, 0); + if (ret < 0) + return ret; + + /* Set Bandwidth */ + ret = bmc150_accel_set_bw(data, BMC150_ACCEL_DEF_BW, 0); + if (ret < 0) + return ret; + + /* Set Default Range */ + ret = i2c_smbus_write_byte_data(data->client, + BMC150_ACCEL_REG_PMU_RANGE, + BMC150_ACCEL_DEF_RANGE_4G); + if (ret < 0) { + dev_err(&data->client->dev, + "Error writing reg_pmu_range\n"); + return ret; + } + + data->range = BMC150_ACCEL_DEF_RANGE_4G; + + /* Set default slope duration */ + ret = i2c_smbus_read_byte_data(data->client, BMC150_ACCEL_REG_INT_5); + if (ret < 0) { + dev_err(&data->client->dev, "Error reading reg_int_5\n"); + return ret; + } + data->slope_dur |= BMC150_ACCEL_DEF_SLOPE_DURATION; + ret = i2c_smbus_write_byte_data(data->client, + BMC150_ACCEL_REG_INT_5, + data->slope_dur); + if (ret < 0) { + dev_err(&data->client->dev, "Error writing reg_int_5\n"); + return ret; + } + dev_dbg(&data->client->dev, "slope_dur %x\n", data->slope_dur); + + /* Set default slope thresholds */ + ret = i2c_smbus_write_byte_data(data->client, + BMC150_ACCEL_REG_INT_6, + BMC150_ACCEL_DEF_SLOPE_THRESHOLD); + if (ret < 0) { + dev_err(&data->client->dev, "Error writing reg_int_6\n"); + return ret; + } + data->slope_thres = BMC150_ACCEL_DEF_SLOPE_THRESHOLD; + dev_dbg(&data->client->dev, "slope_thres %x\n", data->slope_thres); + + /* Set default as latched interrupts */ + ret = i2c_smbus_write_byte_data(data->client, + BMC150_ACCEL_REG_INT_RST_LATCH, + BMC150_ACCEL_INT_MODE_LATCH_INT | + BMC150_ACCEL_INT_MODE_LATCH_RESET); + if (ret < 0) { + dev_err(&data->client->dev, + "Error writing reg_int_rst_latch\n"); + return ret; + } + + return 0; +} + +static int bmc150_accel_setup_any_motion_interrupt( + struct bmc150_accel_data *data, + bool status) +{ + int ret; + + /* Enable/Disable INT1 mapping */ + ret = i2c_smbus_read_byte_data(data->client, + BMC150_ACCEL_REG_INT_MAP_0); + if (ret < 0) { + dev_err(&data->client->dev, "Error reading reg_int_map_0\n"); + return ret; + } + if (status) + ret |= BMC150_ACCEL_INT_MAP_0_BIT_SLOPE; + else + ret &= ~BMC150_ACCEL_INT_MAP_0_BIT_SLOPE; + + ret = i2c_smbus_write_byte_data(data->client, + BMC150_ACCEL_REG_INT_MAP_0, + ret); + if (ret < 0) { + dev_err(&data->client->dev, "Error writing reg_int_map_0\n"); + return ret; + } + + if (status) { + /* Set slope duration (no of samples) */ + ret = i2c_smbus_write_byte_data(data->client, + BMC150_ACCEL_REG_INT_5, + data->slope_dur); + if (ret < 0) { + dev_err(&data->client->dev, "Error write reg_int_5\n"); + return ret; + } + + /* Set slope thresholds */ + ret = i2c_smbus_write_byte_data(data->client, + BMC150_ACCEL_REG_INT_6, + data->slope_thres); + if (ret < 0) { + dev_err(&data->client->dev, "Error write reg_int_6\n"); + return ret; + } + + /* + * New data interrupt is always non-latched, + * which will have higher priority, so no need + * to set latched mode, we will be flooded anyway with INTR + */ + if (!data->dready_trigger_on) { + ret = i2c_smbus_write_byte_data(data->client, + BMC150_ACCEL_REG_INT_RST_LATCH, + BMC150_ACCEL_INT_MODE_LATCH_INT | + BMC150_ACCEL_INT_MODE_LATCH_RESET); + if (ret < 0) { + dev_err(&data->client->dev, + "Error writing reg_int_rst_latch\n"); + return ret; + } + } + + ret = i2c_smbus_write_byte_data(data->client, + BMC150_ACCEL_REG_INT_EN_0, + BMC150_ACCEL_INT_EN_BIT_SLP_X | + BMC150_ACCEL_INT_EN_BIT_SLP_Y | + BMC150_ACCEL_INT_EN_BIT_SLP_Z); + } else + ret = i2c_smbus_write_byte_data(data->client, + BMC150_ACCEL_REG_INT_EN_0, + 0); + + if (ret < 0) { + dev_err(&data->client->dev, "Error writing reg_int_en_0\n"); + return ret; + } + + return 0; +} + +static int bmc150_accel_setup_new_data_interrupt(struct bmc150_accel_data *data, + bool status) +{ + int ret; + + /* Enable/Disable INT1 mapping */ + ret = i2c_smbus_read_byte_data(data->client, + BMC150_ACCEL_REG_INT_MAP_1); + if (ret < 0) { + dev_err(&data->client->dev, "Error reading reg_int_map_1\n"); + return ret; + } + if (status) + ret |= BMC150_ACCEL_INT_MAP_1_BIT_DATA; + else + ret &= ~BMC150_ACCEL_INT_MAP_1_BIT_DATA; + + ret = i2c_smbus_write_byte_data(data->client, + BMC150_ACCEL_REG_INT_MAP_1, + ret); + if (ret < 0) { + dev_err(&data->client->dev, "Error writing reg_int_map_1\n"); + return ret; + } + + if (status) { + /* + * Set non latched mode interrupt and clear any latched + * interrupt + */ + ret = i2c_smbus_write_byte_data(data->client, + BMC150_ACCEL_REG_INT_RST_LATCH, + BMC150_ACCEL_INT_MODE_NON_LATCH_INT | + BMC150_ACCEL_INT_MODE_LATCH_RESET); + if (ret < 0) { + dev_err(&data->client->dev, + "Error writing reg_int_rst_latch\n"); + return ret; + } + + ret = i2c_smbus_write_byte_data(data->client, + BMC150_ACCEL_REG_INT_EN_1, + BMC150_ACCEL_INT_EN_BIT_DATA_EN); + + } else { + /* Restore default interrupt mode */ + ret = i2c_smbus_write_byte_data(data->client, + BMC150_ACCEL_REG_INT_RST_LATCH, + BMC150_ACCEL_INT_MODE_LATCH_INT | + BMC150_ACCEL_INT_MODE_LATCH_RESET); + if (ret < 0) { + dev_err(&data->client->dev, + "Error writing reg_int_rst_latch\n"); + return ret; + } + + ret = i2c_smbus_write_byte_data(data->client, + BMC150_ACCEL_REG_INT_EN_1, + 0); + } + + if (ret < 0) { + dev_err(&data->client->dev, "Error writing reg_int_en_1\n"); + return ret; + } + + return 0; +} + +static int bmc150_accel_get_bw(struct bmc150_accel_data *data, int *val, + int *val2) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(bmc150_accel_samp_freq_table); ++i) { + if (bmc150_accel_samp_freq_table[i].bw_bits == data->bw_bits) { + *val = bmc150_accel_samp_freq_table[i].val; + *val2 = bmc150_accel_samp_freq_table[i].val2; + return IIO_VAL_INT_PLUS_MICRO; + } + } + + return -EINVAL; +} + +static int bmc150_accel_get_startup_times(struct bmc150_accel_data *data) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(bmc150_accel_sample_upd_time); ++i) { + if (bmc150_accel_sample_upd_time[i].bw_bits == data->bw_bits) + return bmc150_accel_sample_upd_time[i].msec; + } + + return BMC150_ACCEL_MAX_STARTUP_TIME_MS; +} + +static int bmc150_accel_set_power_state(struct bmc150_accel_data *data, bool on) +{ + int ret; + + if (on) + ret = pm_runtime_get_sync(&data->client->dev); + else { + pm_runtime_mark_last_busy(&data->client->dev); + ret = pm_runtime_put_autosuspend(&data->client->dev); + } + if (ret < 0) { + dev_err(&data->client->dev, + "Failed: bmc150_accel_set_power_state for %d\n", on); + return ret; + } + + return 0; +} + +static int bmc150_accel_set_scale(struct bmc150_accel_data *data, int val) +{ + int ret, i; + + for (i = 0; i < ARRAY_SIZE(bmc150_accel_scale_table); ++i) { + if (bmc150_accel_scale_table[i].scale == val) { + ret = i2c_smbus_write_byte_data( + data->client, + BMC150_ACCEL_REG_PMU_RANGE, + bmc150_accel_scale_table[i].range); + if (ret < 0) { + dev_err(&data->client->dev, + "Error writing pmu_range\n"); + return ret; + } + + data->range = bmc150_accel_scale_table[i].range; + return 0; + } + } + + return -EINVAL; +} + +static int bmc150_accel_get_temp(struct bmc150_accel_data *data, int *val) +{ + int ret; + + mutex_lock(&data->mutex); + + ret = i2c_smbus_read_byte_data(data->client, BMC150_ACCEL_REG_TEMP); + if (ret < 0) { + dev_err(&data->client->dev, "Error reading reg_temp\n"); + mutex_unlock(&data->mutex); + return ret; + } + *val = sign_extend32(ret, 7); + + mutex_unlock(&data->mutex); + + return IIO_VAL_INT; +} + +static int bmc150_accel_get_axis(struct bmc150_accel_data *data, int axis, + int *val) +{ + int ret; + + mutex_lock(&data->mutex); + ret = bmc150_accel_set_power_state(data, true); + if (ret < 0) { + mutex_unlock(&data->mutex); + return ret; + } + + ret = i2c_smbus_read_word_data(data->client, + BMC150_ACCEL_AXIS_TO_REG(axis)); + if (ret < 0) { + dev_err(&data->client->dev, "Error reading axis %d\n", axis); + bmc150_accel_set_power_state(data, false); + mutex_unlock(&data->mutex); + return ret; + } + *val = sign_extend32(ret >> 4, 11); + ret = bmc150_accel_set_power_state(data, false); + mutex_unlock(&data->mutex); + if (ret < 0) + return ret; + + return IIO_VAL_INT; +} + +static int bmc150_accel_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct bmc150_accel_data *data = iio_priv(indio_dev); + int ret; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + switch (chan->type) { + case IIO_TEMP: + return bmc150_accel_get_temp(data, val); + case IIO_ACCEL: + if (iio_buffer_enabled(indio_dev)) + return -EBUSY; + else + return bmc150_accel_get_axis(data, + chan->scan_index, + val); + default: + return -EINVAL; + } + case IIO_CHAN_INFO_OFFSET: + if (chan->type == IIO_TEMP) { + *val = BMC150_ACCEL_TEMP_CENTER_VAL; + return IIO_VAL_INT; + } else + return -EINVAL; + case IIO_CHAN_INFO_SCALE: + *val = 0; + switch (chan->type) { + case IIO_TEMP: + *val2 = 500000; + return IIO_VAL_INT_PLUS_MICRO; + case IIO_ACCEL: + { + int i; + + for (i = 0; i < ARRAY_SIZE(bmc150_accel_scale_table); + ++i) { + if (bmc150_accel_scale_table[i].range == + data->range) { + *val2 = + bmc150_accel_scale_table[i].scale; + return IIO_VAL_INT_PLUS_MICRO; + } + } + return -EINVAL; + } + default: + return -EINVAL; + } + case IIO_CHAN_INFO_SAMP_FREQ: + mutex_lock(&data->mutex); + ret = bmc150_accel_get_bw(data, val, val2); + mutex_unlock(&data->mutex); + return ret; + default: + return -EINVAL; + } +} + +static int bmc150_accel_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ + struct bmc150_accel_data *data = iio_priv(indio_dev); + int ret; + + switch (mask) { + case IIO_CHAN_INFO_SAMP_FREQ: + mutex_lock(&data->mutex); + ret = bmc150_accel_set_bw(data, val, val2); + mutex_unlock(&data->mutex); + break; + case IIO_CHAN_INFO_SCALE: + if (val) + return -EINVAL; + + mutex_lock(&data->mutex); + ret = bmc150_accel_set_scale(data, val2); + mutex_unlock(&data->mutex); + return ret; + default: + ret = -EINVAL; + } + + return ret; +} + +static int bmc150_accel_read_event(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + enum iio_event_type type, + enum iio_event_direction dir, + enum iio_event_info info, + int *val, int *val2) +{ + struct bmc150_accel_data *data = iio_priv(indio_dev); + + *val2 = 0; + switch (info) { + case IIO_EV_INFO_VALUE: + *val = data->slope_thres; + break; + case IIO_EV_INFO_PERIOD: + *val = data->slope_dur & BMC150_ACCEL_SLOPE_DUR_MASK; + break; + default: + return -EINVAL; + } + + return IIO_VAL_INT; +} + +static int bmc150_accel_write_event(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + enum iio_event_type type, + enum iio_event_direction dir, + enum iio_event_info info, + int val, int val2) +{ + struct bmc150_accel_data *data = iio_priv(indio_dev); + + if (data->ev_enable_state) + return -EBUSY; + + switch (info) { + case IIO_EV_INFO_VALUE: + data->slope_thres = val; + break; + case IIO_EV_INFO_PERIOD: + data->slope_dur &= ~BMC150_ACCEL_SLOPE_DUR_MASK; + data->slope_dur |= val & BMC150_ACCEL_SLOPE_DUR_MASK; + break; + default: + return -EINVAL; + } + + return 0; +} + +static int bmc150_accel_read_event_config(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + enum iio_event_type type, + enum iio_event_direction dir) +{ + + struct bmc150_accel_data *data = iio_priv(indio_dev); + + return data->ev_enable_state; +} + +static int bmc150_accel_write_event_config(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + enum iio_event_type type, + enum iio_event_direction dir, + int state) +{ + struct bmc150_accel_data *data = iio_priv(indio_dev); + int ret; + + if (state && data->ev_enable_state) + return 0; + + mutex_lo |