diff options
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/cpufreq/Kconfig.arm | 16 | ||||
-rw-r--r-- | drivers/cpufreq/Makefile | 3 | ||||
-rw-r--r-- | drivers/cpufreq/armada-8k-cpufreq.c | 2 | ||||
-rw-r--r-- | drivers/cpufreq/cpufreq-dt-platdev.c | 5 | ||||
-rw-r--r-- | drivers/cpufreq/imx-cpufreq-dt.c | 8 | ||||
-rw-r--r-- | drivers/cpufreq/mediatek-cpufreq.c | 4 | ||||
-rw-r--r-- | drivers/cpufreq/qcom-cpufreq-hw.c | 23 | ||||
-rw-r--r-- | drivers/cpufreq/qcom-cpufreq-kryo.c | 249 | ||||
-rw-r--r-- | drivers/cpufreq/qcom-cpufreq-nvmem.c | 352 | ||||
-rw-r--r-- | drivers/cpufreq/sun50i-cpufreq-nvmem.c | 226 | ||||
-rw-r--r-- | drivers/cpufreq/ti-cpufreq.c | 1 | ||||
-rw-r--r-- | drivers/opp/core.c | 68 |
12 files changed, 685 insertions, 272 deletions
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm index 56c31a78c692..a905796f7f85 100644 --- a/drivers/cpufreq/Kconfig.arm +++ b/drivers/cpufreq/Kconfig.arm @@ -19,6 +19,18 @@ config ACPI_CPPC_CPUFREQ If in doubt, say N. +config ARM_ALLWINNER_SUN50I_CPUFREQ_NVMEM + tristate "Allwinner nvmem based SUN50I CPUFreq driver" + depends on ARCH_SUNXI + depends on NVMEM_SUNXI_SID + select PM_OPP + help + This adds the nvmem based CPUFreq driver for Allwinner + h6 SoC. + + To compile this driver as a module, choose M here: the + module will be called sun50i-cpufreq-nvmem. + config ARM_ARMADA_37XX_CPUFREQ tristate "Armada 37xx CPUFreq support" depends on ARCH_MVEBU && CPUFREQ_DT @@ -120,8 +132,8 @@ config ARM_OMAP2PLUS_CPUFREQ depends on ARCH_OMAP2PLUS default ARCH_OMAP2PLUS -config ARM_QCOM_CPUFREQ_KRYO - tristate "Qualcomm Kryo based CPUFreq" +config ARM_QCOM_CPUFREQ_NVMEM + tristate "Qualcomm nvmem based CPUFreq" depends on ARM64 depends on QCOM_QFPROM depends on QCOM_SMEM diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile index 5a6c70d26c98..9a9f5ccd13d9 100644 --- a/drivers/cpufreq/Makefile +++ b/drivers/cpufreq/Makefile @@ -64,7 +64,7 @@ obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ) += omap-cpufreq.o obj-$(CONFIG_ARM_PXA2xx_CPUFREQ) += pxa2xx-cpufreq.o obj-$(CONFIG_PXA3xx) += pxa3xx-cpufreq.o obj-$(CONFIG_ARM_QCOM_CPUFREQ_HW) += qcom-cpufreq-hw.o -obj-$(CONFIG_ARM_QCOM_CPUFREQ_KRYO) += qcom-cpufreq-kryo.o +obj-$(CONFIG_ARM_QCOM_CPUFREQ_NVMEM) += qcom-cpufreq-nvmem.o obj-$(CONFIG_ARM_RASPBERRYPI_CPUFREQ) += raspberrypi-cpufreq.o obj-$(CONFIG_ARM_S3C2410_CPUFREQ) += s3c2410-cpufreq.o obj-$(CONFIG_ARM_S3C2412_CPUFREQ) += s3c2412-cpufreq.o @@ -80,6 +80,7 @@ obj-$(CONFIG_ARM_SCMI_CPUFREQ) += scmi-cpufreq.o obj-$(CONFIG_ARM_SCPI_CPUFREQ) += scpi-cpufreq.o obj-$(CONFIG_ARM_SPEAR_CPUFREQ) += spear-cpufreq.o obj-$(CONFIG_ARM_STI_CPUFREQ) += sti-cpufreq.o +obj-$(CONFIG_ARM_ALLWINNER_SUN50I_CPUFREQ_NVMEM) += sun50i-cpufreq-nvmem.o obj-$(CONFIG_ARM_TANGO_CPUFREQ) += tango-cpufreq.o obj-$(CONFIG_ARM_TEGRA20_CPUFREQ) += tegra20-cpufreq.o obj-$(CONFIG_ARM_TEGRA124_CPUFREQ) += tegra124-cpufreq.o diff --git a/drivers/cpufreq/armada-8k-cpufreq.c b/drivers/cpufreq/armada-8k-cpufreq.c index 988ebc326bdb..39e34f5066d3 100644 --- a/drivers/cpufreq/armada-8k-cpufreq.c +++ b/drivers/cpufreq/armada-8k-cpufreq.c @@ -136,6 +136,8 @@ static int __init armada_8k_cpufreq_init(void) nb_cpus = num_possible_cpus(); freq_tables = kcalloc(nb_cpus, sizeof(*freq_tables), GFP_KERNEL); + if (!freq_tables) + return -ENOMEM; cpumask_copy(&cpus, cpu_possible_mask); /* diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c b/drivers/cpufreq/cpufreq-dt-platdev.c index 03dc4244ab00..bca8d1f47fd2 100644 --- a/drivers/cpufreq/cpufreq-dt-platdev.c +++ b/drivers/cpufreq/cpufreq-dt-platdev.c @@ -101,12 +101,15 @@ static const struct of_device_id whitelist[] __initconst = { * platforms using "operating-points-v2" property. */ static const struct of_device_id blacklist[] __initconst = { + { .compatible = "allwinner,sun50i-h6", }, + { .compatible = "calxeda,highbank", }, { .compatible = "calxeda,ecx-2000", }, { .compatible = "fsl,imx7d", }, { .compatible = "fsl,imx8mq", }, { .compatible = "fsl,imx8mm", }, + { .compatible = "fsl,imx8mn", }, { .compatible = "marvell,armadaxp", }, @@ -117,12 +120,14 @@ static const struct of_device_id blacklist[] __initconst = { { .compatible = "mediatek,mt817x", }, { .compatible = "mediatek,mt8173", }, { .compatible = "mediatek,mt8176", }, + { .compatible = "mediatek,mt8183", }, { .compatible = "nvidia,tegra124", }, { .compatible = "nvidia,tegra210", }, { .compatible = "qcom,apq8096", }, { .compatible = "qcom,msm8996", }, + { .compatible = "qcom,qcs404", }, { .compatible = "st,stih407", }, { .compatible = "st,stih410", }, diff --git a/drivers/cpufreq/imx-cpufreq-dt.c b/drivers/cpufreq/imx-cpufreq-dt.c index 4f85f3112784..35db14cf3102 100644 --- a/drivers/cpufreq/imx-cpufreq-dt.c +++ b/drivers/cpufreq/imx-cpufreq-dt.c @@ -16,6 +16,7 @@ #define OCOTP_CFG3_SPEED_GRADE_SHIFT 8 #define OCOTP_CFG3_SPEED_GRADE_MASK (0x3 << 8) +#define IMX8MN_OCOTP_CFG3_SPEED_GRADE_MASK (0xf << 8) #define OCOTP_CFG3_MKT_SEGMENT_SHIFT 6 #define OCOTP_CFG3_MKT_SEGMENT_MASK (0x3 << 6) @@ -34,7 +35,12 @@ static int imx_cpufreq_dt_probe(struct platform_device *pdev) if (ret) return ret; - speed_grade = (cell_value & OCOTP_CFG3_SPEED_GRADE_MASK) >> OCOTP_CFG3_SPEED_GRADE_SHIFT; + if (of_machine_is_compatible("fsl,imx8mn")) + speed_grade = (cell_value & IMX8MN_OCOTP_CFG3_SPEED_GRADE_MASK) + >> OCOTP_CFG3_SPEED_GRADE_SHIFT; + else + speed_grade = (cell_value & OCOTP_CFG3_SPEED_GRADE_MASK) + >> OCOTP_CFG3_SPEED_GRADE_SHIFT; mkt_segment = (cell_value & OCOTP_CFG3_MKT_SEGMENT_MASK) >> OCOTP_CFG3_MKT_SEGMENT_SHIFT; /* diff --git a/drivers/cpufreq/mediatek-cpufreq.c b/drivers/cpufreq/mediatek-cpufreq.c index f14f3a85f2f7..0c98dd08273d 100644 --- a/drivers/cpufreq/mediatek-cpufreq.c +++ b/drivers/cpufreq/mediatek-cpufreq.c @@ -338,7 +338,7 @@ static int mtk_cpu_dvfs_info_init(struct mtk_cpu_dvfs_info *info, int cpu) goto out_free_resources; } - proc_reg = regulator_get_exclusive(cpu_dev, "proc"); + proc_reg = regulator_get_optional(cpu_dev, "proc"); if (IS_ERR(proc_reg)) { if (PTR_ERR(proc_reg) == -EPROBE_DEFER) pr_warn("proc regulator for cpu%d not ready, retry.\n", @@ -535,6 +535,8 @@ static const struct of_device_id mtk_cpufreq_machines[] __initconst = { { .compatible = "mediatek,mt817x", }, { .compatible = "mediatek,mt8173", }, { .compatible = "mediatek,mt8176", }, + { .compatible = "mediatek,mt8183", }, + { .compatible = "mediatek,mt8516", }, { } }; diff --git a/drivers/cpufreq/qcom-cpufreq-hw.c b/drivers/cpufreq/qcom-cpufreq-hw.c index 4b0b50403901..a9ae2f84a4ef 100644 --- a/drivers/cpufreq/qcom-cpufreq-hw.c +++ b/drivers/cpufreq/qcom-cpufreq-hw.c @@ -20,6 +20,7 @@ #define LUT_VOLT GENMASK(11, 0) #define LUT_ROW_SIZE 32 #define CLK_HW_DIV 2 +#define LUT_TURBO_IND 1 /* Register offsets */ #define REG_ENABLE 0x0 @@ -34,9 +35,12 @@ static int qcom_cpufreq_hw_target_index(struct cpufreq_policy *policy, unsigned int index) { void __iomem *perf_state_reg = policy->driver_data; + unsigned long freq = policy->freq_table[index].frequency; writel_relaxed(index, perf_state_reg); + arch_set_freq_scale(policy->related_cpus, freq, + policy->cpuinfo.max_freq); return 0; } @@ -63,6 +67,7 @@ static unsigned int qcom_cpufreq_hw_fast_switch(struct cpufreq_policy *policy, { void __iomem *perf_state_reg = policy->driver_data; int index; + unsigned long freq; index = policy->cached_resolved_idx; if (index < 0) @@ -70,16 +75,19 @@ static unsigned int qcom_cpufreq_hw_fast_switch(struct cpufreq_policy *policy, writel_relaxed(index, perf_state_reg); - return policy->freq_table[index].frequency; + freq = policy->freq_table[index].frequency; + arch_set_freq_scale(policy->related_cpus, freq, + policy->cpuinfo.max_freq); + + return freq; } static int qcom_cpufreq_hw_read_lut(struct device *cpu_dev, struct cpufreq_policy *policy, void __iomem *base) { - u32 data, src, lval, i, core_count, prev_cc = 0, prev_freq = 0, freq; + u32 data, src, lval, i, core_count, prev_freq = 0, freq; u32 volt; - unsigned int max_cores = cpumask_weight(policy->cpus); struct cpufreq_frequency_table *table; table = kcalloc(LUT_MAX_ENTRIES + 1, sizeof(*table), GFP_KERNEL); @@ -102,12 +110,12 @@ static int qcom_cpufreq_hw_read_lut(struct device *cpu_dev, else freq = cpu_hw_rate / 1000; - if (freq != prev_freq && core_count == max_cores) { + if (freq != prev_freq && core_count != LUT_TURBO_IND) { table[i].frequency = freq; dev_pm_opp_add(cpu_dev, freq * 1000, volt); dev_dbg(cpu_dev, "index=%d freq=%d, core_count %d\n", i, freq, core_count); - } else { + } else if (core_count == LUT_TURBO_IND) { table[i].frequency = CPUFREQ_ENTRY_INVALID; } @@ -115,14 +123,14 @@ static int qcom_cpufreq_hw_read_lut(struct device *cpu_dev, * Two of the same frequencies with the same core counts means * end of table */ - if (i > 0 && prev_freq == freq && prev_cc == core_count) { + if (i > 0 && prev_freq == freq) { struct cpufreq_frequency_table *prev = &table[i - 1]; /* * Only treat the last frequency that might be a boost * as the boost frequency */ - if (prev_cc != max_cores) { + if (prev->frequency == CPUFREQ_ENTRY_INVALID) { prev->frequency = prev_freq; prev->flags = CPUFREQ_BOOST_FREQ; dev_pm_opp_add(cpu_dev, prev_freq * 1000, volt); @@ -131,7 +139,6 @@ static int qcom_cpufreq_hw_read_lut(struct device *cpu_dev, break; } - prev_cc = core_count; prev_freq = freq; } diff --git a/drivers/cpufreq/qcom-cpufreq-kryo.c b/drivers/cpufreq/qcom-cpufreq-kryo.c deleted file mode 100644 index dd64dcf89c74..000000000000 --- a/drivers/cpufreq/qcom-cpufreq-kryo.c +++ /dev/null @@ -1,249 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Copyright (c) 2018, The Linux Foundation. All rights reserved. - */ - -/* - * In Certain QCOM SoCs like apq8096 and msm8996 that have KRYO processors, - * the CPU frequency subset and voltage value of each OPP varies - * based on the silicon variant in use. Qualcomm Process Voltage Scaling Tables - * defines the voltage and frequency value based on the msm-id in SMEM - * and speedbin blown in the efuse combination. - * The qcom-cpufreq-kryo driver reads the msm-id and efuse value from the SoC - * to provide the OPP framework with required information. - * This is used to determine the voltage and frequency value for each OPP of - * operating-points-v2 table when it is parsed by the OPP framework. - */ - -#include <linux/cpu.h> -#include <linux/err.h> -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/nvmem-consumer.h> -#include <linux/of.h> -#include <linux/platform_device.h> -#include <linux/pm_opp.h> -#include <linux/slab.h> -#include <linux/soc/qcom/smem.h> - -#define MSM_ID_SMEM 137 - -enum _msm_id { - MSM8996V3 = 0xF6ul, - APQ8096V3 = 0x123ul, - MSM8996SG = 0x131ul, - APQ8096SG = 0x138ul, -}; - -enum _msm8996_version { - MSM8996_V3, - MSM8996_SG, - NUM_OF_MSM8996_VERSIONS, -}; - -static struct platform_device *cpufreq_dt_pdev, *kryo_cpufreq_pdev; - -static enum _msm8996_version qcom_cpufreq_kryo_get_msm_id(void) -{ - size_t len; - u32 *msm_id; - enum _msm8996_version version; - - msm_id = qcom_smem_get(QCOM_SMEM_HOST_ANY, MSM_ID_SMEM, &len); - if (IS_ERR(msm_id)) - return NUM_OF_MSM8996_VERSIONS; - - /* The first 4 bytes are format, next to them is the actual msm-id */ - msm_id++; - - switch ((enum _msm_id)*msm_id) { - case MSM8996V3: - case APQ8096V3: - version = MSM8996_V3; - break; - case MSM8996SG: - case APQ8096SG: - version = MSM8996_SG; - break; - default: - version = NUM_OF_MSM8996_VERSIONS; - } - - return version; -} - -static int qcom_cpufreq_kryo_probe(struct platform_device *pdev) -{ - struct opp_table **opp_tables; - enum _msm8996_version msm8996_version; - struct nvmem_cell *speedbin_nvmem; - struct device_node *np; - struct device *cpu_dev; - unsigned cpu; - u8 *speedbin; - u32 versions; - size_t len; - int ret; - - cpu_dev = get_cpu_device(0); - if (!cpu_dev) - return -ENODEV; - - msm8996_version = qcom_cpufreq_kryo_get_msm_id(); - if (NUM_OF_MSM8996_VERSIONS == msm8996_version) { - dev_err(cpu_dev, "Not Snapdragon 820/821!"); - return -ENODEV; - } - - np = dev_pm_opp_of_get_opp_desc_node(cpu_dev); - if (!np) - return -ENOENT; - - ret = of_device_is_compatible(np, "operating-points-v2-kryo-cpu"); - if (!ret) { - of_node_put(np); - return -ENOENT; - } - - speedbin_nvmem = of_nvmem_cell_get(np, NULL); - of_node_put(np); - if (IS_ERR(speedbin_nvmem)) { - if (PTR_ERR(speedbin_nvmem) != -EPROBE_DEFER) - dev_err(cpu_dev, "Could not get nvmem cell: %ld\n", - PTR_ERR(speedbin_nvmem)); - return PTR_ERR(speedbin_nvmem); - } - - speedbin = nvmem_cell_read(speedbin_nvmem, &len); - nvmem_cell_put(speedbin_nvmem); - if (IS_ERR(speedbin)) - return PTR_ERR(speedbin); - - switch (msm8996_version) { - case MSM8996_V3: - versions = 1 << (unsigned int)(*speedbin); - break; - case MSM8996_SG: - versions = 1 << ((unsigned int)(*speedbin) + 4); - break; - default: - BUG(); - break; - } - kfree(speedbin); - - opp_tables = kcalloc(num_possible_cpus(), sizeof(*opp_tables), GFP_KERNEL); - if (!opp_tables) - return -ENOMEM; - - for_each_possible_cpu(cpu) { - cpu_dev = get_cpu_device(cpu); - if (NULL == cpu_dev) { - ret = -ENODEV; - goto free_opp; - } - - opp_tables[cpu] = dev_pm_opp_set_supported_hw(cpu_dev, - &versions, 1); - if (IS_ERR(opp_tables[cpu])) { - ret = PTR_ERR(opp_tables[cpu]); - dev_err(cpu_dev, "Failed to set supported hardware\n"); - goto free_opp; - } - } - - cpufreq_dt_pdev = platform_device_register_simple("cpufreq-dt", -1, - NULL, 0); - if (!IS_ERR(cpufreq_dt_pdev)) { - platform_set_drvdata(pdev, opp_tables); - return 0; - } - - ret = PTR_ERR(cpufreq_dt_pdev); - dev_err(cpu_dev, "Failed to register platform device\n"); - -free_opp: - for_each_possible_cpu(cpu) { - if (IS_ERR_OR_NULL(opp_tables[cpu])) - break; - dev_pm_opp_put_supported_hw(opp_tables[cpu]); - } - kfree(opp_tables); - - return ret; -} - -static int qcom_cpufreq_kryo_remove(struct platform_device *pdev) -{ - struct opp_table **opp_tables = platform_get_drvdata(pdev); - unsigned int cpu; - - platform_device_unregister(cpufreq_dt_pdev); - - for_each_possible_cpu(cpu) - dev_pm_opp_put_supported_hw(opp_tables[cpu]); - - kfree(opp_tables); - - return 0; -} - -static struct platform_driver qcom_cpufreq_kryo_driver = { - .probe = qcom_cpufreq_kryo_probe, - .remove = qcom_cpufreq_kryo_remove, - .driver = { - .name = "qcom-cpufreq-kryo", - }, -}; - -static const struct of_device_id qcom_cpufreq_kryo_match_list[] __initconst = { - { .compatible = "qcom,apq8096", }, - { .compatible = "qcom,msm8996", }, - {} -}; - -/* - * Since the driver depends on smem and nvmem drivers, which may - * return EPROBE_DEFER, all the real activity is done in the probe, - * which may be defered as well. The init here is only registering - * the driver and the platform device. - */ -static int __init qcom_cpufreq_kryo_init(void) -{ - struct device_node *np = of_find_node_by_path("/"); - const struct of_device_id *match; - int ret; - - if (!np) - return -ENODEV; - - match = of_match_node(qcom_cpufreq_kryo_match_list, np); - of_node_put(np); - if (!match) - return -ENODEV; - - ret = platform_driver_register(&qcom_cpufreq_kryo_driver); - if (unlikely(ret < 0)) - return ret; - - kryo_cpufreq_pdev = platform_device_register_simple( - "qcom-cpufreq-kryo", -1, NULL, 0); - ret = PTR_ERR_OR_ZERO(kryo_cpufreq_pdev); - if (0 == ret) - return 0; - - platform_driver_unregister(&qcom_cpufreq_kryo_driver); - return ret; -} -module_init(qcom_cpufreq_kryo_init); - -static void __exit qcom_cpufreq_kryo_exit(void) -{ - platform_device_unregister(kryo_cpufreq_pdev); - platform_driver_unregister(&qcom_cpufreq_kryo_driver); -} -module_exit(qcom_cpufreq_kryo_exit); - -MODULE_DESCRIPTION("Qualcomm Technologies, Inc. Kryo CPUfreq driver"); -MODULE_LICENSE("GPL v2"); diff --git a/drivers/cpufreq/qcom-cpufreq-nvmem.c b/drivers/cpufreq/qcom-cpufreq-nvmem.c new file mode 100644 index 000000000000..f0d2d5035413 --- /dev/null +++ b/drivers/cpufreq/qcom-cpufreq-nvmem.c @@ -0,0 +1,352 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2018, The Linux Foundation. All rights reserved. + */ + +/* + * In Certain QCOM SoCs like apq8096 and msm8996 that have KRYO processors, + * the CPU frequency subset and voltage value of each OPP varies + * based on the silicon variant in use. Qualcomm Process Voltage Scaling Tables + * defines the voltage and frequency value based on the msm-id in SMEM + * and speedbin blown in the efuse combination. + * The qcom-cpufreq-nvmem driver reads the msm-id and efuse value from the SoC + * to provide the OPP framework with required information. + * This is used to determine the voltage and frequency value for each OPP of + * operating-points-v2 table when it is parsed by the OPP framework. + */ + +#include <linux/cpu.h> +#include <linux/err.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/nvmem-consumer.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/pm_domain.h> +#include <linux/pm_opp.h> +#include <linux/slab.h> +#include <linux/soc/qcom/smem.h> + +#define MSM_ID_SMEM 137 + +enum _msm_id { + MSM8996V3 = 0xF6ul, + APQ8096V3 = 0x123ul, + MSM8996SG = 0x131ul, + APQ8096SG = 0x138ul, +}; + +enum _msm8996_version { + MSM8996_V3, + MSM8996_SG, + NUM_OF_MSM8996_VERSIONS, +}; + +struct qcom_cpufreq_drv; + +struct qcom_cpufreq_match_data { + int (*get_version)(struct device *cpu_dev, + struct nvmem_cell *speedbin_nvmem, + struct qcom_cpufreq_drv *drv); + const char **genpd_names; +}; + +struct qcom_cpufreq_drv { + struct opp_table **opp_tables; + struct opp_table **genpd_opp_tables; + u32 versions; + const struct qcom_cpufreq_match_data *data; +}; + +static struct platform_device *cpufreq_dt_pdev, *cpufreq_pdev; + +static enum _msm8996_version qcom_cpufreq_get_msm_id(void) +{ + size_t len; + u32 *msm_id; + enum _msm8996_version version; + + msm_id = qcom_smem_get(QCOM_SMEM_HOST_ANY, MSM_ID_SMEM, &len); + if (IS_ERR(msm_id)) + return NUM_OF_MSM8996_VERSIONS; + + /* The first 4 bytes are format, next to them is the actual msm-id */ + msm_id++; + + switch ((enum _msm_id)*msm_id) { + case MSM8996V3: + case APQ8096V3: + version = MSM8996_V3; + break; + case MSM8996SG: + case APQ8096SG: + version = MSM8996_SG; + break; + default: + version = NUM_OF_MSM8996_VERSIONS; + } + + return version; +} + +static int qcom_cpufreq_kryo_name_version(struct device *cpu_dev, + struct nvmem_cell *speedbin_nvmem, + struct qcom_cpufreq_drv *drv) +{ + size_t len; + u8 *speedbin; + enum _msm8996_version msm8996_version; + + msm8996_version = qcom_cpufreq_get_msm_id(); + if (NUM_OF_MSM8996_VERSIONS == msm8996_version) { + dev_err(cpu_dev, "Not Snapdragon 820/821!"); + return -ENODEV; + } + + speedbin = nvmem_cell_read(speedbin_nvmem, &len); + if (IS_ERR(speedbin)) + return PTR_ERR(speedbin); + + switch (msm8996_version) { + case MSM8996_V3: + drv->versions = 1 << (unsigned int)(*speedbin); + break; + case MSM8996_SG: + drv->versions = 1 << ((unsigned int)(*speedbin) + 4); + break; + default: + BUG(); + break; + } + + kfree(speedbin); + return 0; +} + +static const struct qcom_cpufreq_match_data match_data_kryo = { + .get_version = qcom_cpufreq_kryo_name_version, +}; + +static const char *qcs404_genpd_names[] = { "cpr", NULL }; + +static const struct qcom_cpufreq_match_data match_data_qcs404 = { + .genpd_names = qcs404_genpd_names, +}; + +static int qcom_cpufreq_probe(struct platform_device *pdev) +{ + struct qcom_cpufreq_drv *drv; + struct nvmem_cell *speedbin_nvmem; + struct device_node *np; + struct device *cpu_dev; + unsigned cpu; + const struct of_device_id *match; + int ret; + + cpu_dev = get_cpu_device(0); + if (!cpu_dev) + return -ENODEV; + + np = dev_pm_opp_of_get_opp_desc_node(cpu_dev); + if (!np) + return -ENOENT; + + ret = of_device_is_compatible(np, "operating-points-v2-kryo-cpu"); + if (!ret) { + of_node_put(np); + return -ENOENT; + } + + drv = kzalloc(sizeof(*drv), GFP_KERNEL); + if (!drv) + return -ENOMEM; + + match = pdev->dev.platform_data; + drv->data = match->data; + if (!drv->data) { + ret = -ENODEV; + goto free_drv; + } + + if (drv->data->get_version) { + speedbin_nvmem = of_nvmem_cell_get(np, NULL); + if (IS_ERR(speedbin_nvmem)) { + if (PTR_ERR(speedbin_nvmem) != -EPROBE_DEFER) + dev_err(cpu_dev, + "Could not get nvmem cell: %ld\n", + PTR_ERR(speedbin_nvmem)); + ret = PTR_ERR(speedbin_nvmem); + goto free_drv; + } + + ret = drv->data->get_version(cpu_dev, speedbin_nvmem, drv); + if (ret) { + nvmem_cell_put(speedbin_nvmem); + goto free_drv; + } + nvmem_cell_put(speedbin_nvmem); + } + of_node_put(np); + + drv->opp_tables = kcalloc(num_possible_cpus(), sizeof(*drv->opp_tables), + GFP_KERNEL); + if (!drv->opp_tables) { + ret = -ENOMEM; + goto free_drv; + } + + drv->genpd_opp_tables = kcalloc(num_possible_cpus(), + sizeof(*drv->genpd_opp_tables), + GFP_KERNEL); + if (!drv->genpd_opp_tables) { + ret = -ENOMEM; + goto free_opp; + } + + for_each_possible_cpu(cpu) { + cpu_dev = get_cpu_device(cpu); + if (NULL == cpu_dev) { + ret = -ENODEV; + goto free_genpd_opp; + } + + if (drv->data->get_version) { + drv->opp_tables[cpu] = + dev_pm_opp_set_supported_hw(cpu_dev, + &drv->versions, 1); + if (IS_ERR(drv->opp_tables[cpu])) { + ret = PTR_ERR(drv->opp_tables[cpu]); + dev_err(cpu_dev, + "Failed to set supported hardware\n"); + goto free_genpd_opp; + } + } + + if (drv->data->genpd_names) { + drv->genpd_opp_tables[cpu] = + dev_pm_opp_attach_genpd(cpu_dev, + drv->data->genpd_names, + NULL); + if (IS_ERR(drv->genpd_opp_tables[cpu])) { + ret = PTR_ERR(drv->genpd_opp_tables[cpu]); + if (ret != -EPROBE_DEFER) + dev_err(cpu_dev, + "Could not attach to pm_domain: %d\n", + ret); + goto free_genpd_opp; + } + } + } + + cpufreq_dt_pdev = platform_device_register_simple("cpufreq-dt", -1, + NULL, 0); + if (!IS_ERR(cpufreq_dt_pdev)) { + platform_set_drvdata(pdev, drv); + return 0; + } + + ret = PTR_ERR(cpufreq_dt_pdev); + dev_err(cpu_dev, "Failed to register platform device\n"); + +free_genpd_opp: + for_each_possible_cpu(cpu) { + if (IS_ERR_OR_NULL(drv->genpd_opp_tables[cpu])) + break; + dev_pm_opp_detach_genpd(drv->genpd_opp_tables[cpu]); + } + kfree(drv->genpd_opp_tables); +free_opp: + for_each_possible_cpu(cpu) { + if (IS_ERR_OR_NULL(drv->opp_tables[cpu])) + break; + dev_pm_opp_put_supported_hw(drv->opp_tables[cpu]); + } + kfree(drv->opp_tables); +free_drv: + kfree(drv); + + return ret; +} + +static int qcom_cpufreq_remove(struct platform_device *pdev) +{ + struct qcom_cpufreq_drv *drv = platform_get_drvdata(pdev); + unsigned int cpu; + + platform_device_unregister(cpufreq_dt_pdev); + + for_each_possible_cpu(cpu) { + if (drv->opp_tables[cpu]) + dev_pm_opp_put_supported_hw(drv->opp_tables[cpu]); + if (drv->genpd_opp_tables[cpu]) + dev_pm_opp_detach_genpd(drv->genpd_opp_tables[cpu]); + } + + kfree(drv->opp_tables); + kfree(drv->genpd_opp_tables); + kfree(drv); + + return 0; +} + +static struct platform_driver qcom_cpufreq_driver = { + .probe = qcom_cpufreq_probe, + .remove = qcom_cpufreq_remove, + .driver = { + .name = "qcom-cpufreq-nvmem", + }, +}; + +static const struct of_device_id qcom_cpufreq_match_list[] __initconst = { + { .compatible = "qcom,apq8096", .data = &match_data_kryo }, + { .compatible = "qcom,msm8996", .data = &match_data_kryo }, + { .compatible = "qcom,qcs404", .data = &match_data_qcs404 }, + {}, +}; + +/* + * Since the driver depends on smem and nvmem drivers, which may + * return EPROBE_DEFER, all the real activity is done in the probe, + * which may be defered as well. The init here is only registering + * the driver and the platform device. + */ +static int __init qcom_cpufreq_init(void) +{ + struct device_node *np = of_find_node_by_path("/"); + const struct of_device_id *match; + int ret; + + if (!np) + return -ENODEV; + + match = of_match_node(qcom_cpufreq_match_list, np); + of_node_put(np); + if (!match) + return -ENODEV; + + ret = platform_driver_register(&qcom_cpufreq_driver); + if (unlikely(ret < 0)) + return ret; + + cpufreq_pdev = platform_device_register_data(NULL, "qcom-cpufreq-nvmem", + -1, match, sizeof(*match)); + ret = PTR_ERR_OR_ZERO(cpufreq_pdev); + if (0 == ret) + return 0; + + platform_driver_unregister(&qcom_cpufreq_driver); + return ret; +} +module_init(qcom_cpufreq_init); + +static void __exit qcom_cpufreq_exit(void) +{ + platform_device_unregister(cpufreq_pdev); + platform_driver_unregister(&qcom_cpufreq_driver); +} +module_exit(qcom_cpufreq_exit); + +MODULE_DESCRIPTION("Qualcomm Technologies, Inc. CPUfreq driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/cpufreq/sun50i-cpufreq-nvmem.c b/drivers/cpufreq/sun50i-cpufreq-nvmem.c new file mode 100644 index 000000000000..eca32e443716 --- /dev/null +++ b/drivers/cpufreq/sun50i-cpufreq-nvmem.c @@ -0,0 +1,226 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Allwinner CPUFreq nvmem based driver + * + * The sun50i-cpufreq-nvmem driver reads the efuse value from the SoC to + * provide the OPP framework with required information. + * + * Copyright (C) 2019 Yangtao Li <tiny.windzz@gmail.com> + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> +#include <linux/nvmem-consumer.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/pm_opp.h> +#include <linux/slab.h> + +#define MAX_NAME_LEN 7 + +#define NVMEM_MASK 0x7 +#define NVMEM_SHIFT 5 + +static struct platform_device *cpufreq_dt_pdev, *sun50i_cpufreq_pdev; + +/** + * sun50i_cpufreq_get_efuse() - Parse and return efuse value present on SoC + * @versions: Set to the value parsed from efuse + * + * Returns 0 if success. + */ +static int sun50i_cpufreq_get_efuse(u32 *versions) +{ + struct nvmem_cell *speedbin_nvmem; + struct device_node *np; + struct device *cpu_dev; + u32 *speedbin, efuse_value; + size_t len; + int ret; + + cpu_dev = get_cpu_device(0); + if (!cpu_dev) + return -ENODEV; + + np = dev_pm_opp_of_get_opp_desc_node(cpu_dev); + if (!np) + return -ENOENT; + + ret = of_device_is_compatible(np, + "allwinner,sun50i-h6-operating-points"); + if (!ret) { + of_node_put(np); + return -ENOENT; + } + + speedbin_nvmem = of_nvmem_cell_get(np, NULL); + of_node_put(np); + if (IS_ERR(speedbin_nvmem)) { + if (PTR_ERR(speedbin_nvmem) != -EPROBE_DEFER) + pr_err("Could not get nvmem cell: %ld\n", + PTR_ERR(speedbin_nvmem)); + return PTR_ERR(speedbin_nvmem); + } + + speedbin = nvmem_cell_read(speedbin_nvmem, &len); + nvmem_cell_put(speedbin_nvmem); + if (IS_ERR(speedbin)) + return PTR_ERR(speedbin); + + efuse_value = (*speedbin >> NVMEM_SHIFT) & NVMEM_MASK; + switch (efuse_value) { + case 0b0001: + *versions = 1; + break; + case 0b0011: + *versions = 2; + break; + default: + /* + * For other situations, we treat it as bin0. + * This vf table can be run for any good cpu. + */ + *versions = 0; + break; + } + + kfree(speedbin); + return 0; +}; + +static int sun50i_cpufreq_nvmem_probe(struct platform_device *pdev) +{ + struct opp_table **opp_tables; + char name[MAX_NAME_LEN]; + unsigned int cpu; + u32 speed = 0; + int ret; + + opp_tables = kcalloc(num_possible_cpus(), sizeof(*opp_tables), + GFP_KERNEL); + if (!opp_tables) + return -ENOMEM; + + ret = sun50i_cpufreq_get_efuse(&speed); + if (ret) + return ret; + + snprintf(name, MAX_NAME_LEN, "speed%d", speed); + + for_each_possible_cpu(cpu) { + struct device *cpu_dev = get_cpu_device(cpu); + + if (!cpu_dev) { + ret = -ENODEV; + goto free_opp; + } + + opp_tables[cpu] = dev_pm_opp_set_prop_name(cpu_dev, name); + if (IS_ERR(opp_tables[cpu])) { + ret = PTR_ERR(opp_tables[cpu]); + pr_err("Failed to set prop name\n"); + goto free_opp; + } + } + + cpufreq_dt_pdev = platform_device_register_simple("cpufreq-dt", -1, + NULL, 0); + if (!IS_ERR(cpufreq_dt_pdev)) { + platform_set_drvdata(pdev, opp_tables); + return 0; + } + + ret = PTR_ERR(cpufreq_dt_pdev); + pr_err("Failed to register platform device\n"); + +free_opp: + for_each_possible_cpu(cpu) { + if (IS_ERR_OR_NULL(opp_tables[cpu])) + break; + dev_pm_opp_put_prop_name(opp_tables[cpu]); + } + kfree(opp_tables); + + return ret; +} + +static int sun50i_cpufreq_nvmem_remove(struct platform_device *pdev) +{ + struct opp_table **opp_tables = platform_get_drvdata(pdev); + unsigned int cpu; + + platform_device_unregister(cpufreq_dt_pdev); + + for_each_possible_cpu(cpu) + dev_pm_opp_put_prop_name(opp_tables[cpu]); + + kfree(opp_tables); + + return 0; +} + +static struct platform_driver sun50i_cpufreq_driver = { + .probe = sun50i_cpufreq_nvmem_probe, + .remove = sun50i_cpufreq_nvmem_remove, + .driver = { + .name = "sun50i-cpufreq-nvmem", + }, +}; + +static const struct of_device_id sun50i_cpufreq_match_list[] = { + { .compatible = "allwinner,sun50i-h6" }, + {} +}; + +static const struct of_device_id *sun50i_cpufreq_match_node(void) +{ + const struct of_device_id *match; + struct device_node *np; + + np = of_find_node_by_path("/"); + match = of_match_node(sun50i_cpufreq_match_list, np); + of_node_put(np); + + return match; +} + +/* + * Since the driver depends on nvmem drivers, which may return EPROBE_DEFER, + * all the real activity is done in the probe, which may be defered as well. + * The init here is only registering the driver and the platform device. + */ +static int __init sun50i_cpufreq_init(void) +{ + const struct of_device_id *match; + int ret; + + match = sun50i_cpufreq_match_node(); + if (!match) + return -ENODEV; + + ret = platform_driver_register(&sun50i_cpufreq_driver); + if (unlikely(ret < 0)) + return ret; + + sun50i_cpufreq_pdev = + platform_device_register_simple("sun50i-cpufreq-nvmem", + -1, NULL, 0); + ret = PTR_ERR_OR_ZERO(sun50i_cpufreq_pdev); + if (ret == 0) + return 0; + + platform_driver_unregister(&sun50i_cpufreq_driver); + return ret; +} +module_init(sun50i_cpufreq_init); + +static void __exit sun50i_cpufreq_exit(void) +{ + platform_device_unregister(sun50i_cpufreq_pdev); + platform_driver_unregister(&sun50i_cpufreq_driver); +} +module_exit(sun50i_cpufreq_exit); + +MODULE_DESCRIPTION("Sun50i-h6 cpufreq driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/cpufreq/ti-cpufreq.c b/drivers/cpufreq/ti-cpufreq.c index 2ad1ae17932d..aeaa883a8c9d 100644 --- a/drivers/cpufreq/t |