summaryrefslogtreecommitdiffstats
path: root/drivers/virtio/virtio_ring.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/virtio/virtio_ring.c')
-rw-r--r--drivers/virtio/virtio_ring.c297
1 files changed, 207 insertions, 90 deletions
diff --git a/drivers/virtio/virtio_ring.c b/drivers/virtio/virtio_ring.c
index ffd7e7da5d3b..5217baf5528c 100644
--- a/drivers/virtio/virtio_ring.c
+++ b/drivers/virtio/virtio_ring.c
@@ -24,27 +24,6 @@
#include <linux/module.h>
#include <linux/hrtimer.h>
-/* virtio guest is communicating with a virtual "device" that actually runs on
- * a host processor. Memory barriers are used to control SMP effects. */
-#ifdef CONFIG_SMP
-/* Where possible, use SMP barriers which are more lightweight than mandatory
- * barriers, because mandatory barriers control MMIO effects on accesses
- * through relaxed memory I/O windows (which virtio-pci does not use). */
-#define virtio_mb(vq) \
- do { if ((vq)->weak_barriers) smp_mb(); else mb(); } while(0)
-#define virtio_rmb(vq) \
- do { if ((vq)->weak_barriers) smp_rmb(); else rmb(); } while(0)
-#define virtio_wmb(vq) \
- do { if ((vq)->weak_barriers) smp_wmb(); else wmb(); } while(0)
-#else
-/* We must force memory ordering even if guest is UP since host could be
- * running on another CPU, but SMP barriers are defined to barrier() in that
- * configuration. So fall back to mandatory barriers instead. */
-#define virtio_mb(vq) mb()
-#define virtio_rmb(vq) rmb()
-#define virtio_wmb(vq) wmb()
-#endif
-
#ifdef DEBUG
/* For development, we want to crash whenever the ring is screwed. */
#define BAD_RING(_vq, fmt, args...) \
@@ -119,16 +98,36 @@ struct vring_virtqueue
#define to_vvq(_vq) container_of(_vq, struct vring_virtqueue, vq)
+static inline struct scatterlist *sg_next_chained(struct scatterlist *sg,
+ unsigned int *count)
+{
+ return sg_next(sg);
+}
+
+static inline struct scatterlist *sg_next_arr(struct scatterlist *sg,
+ unsigned int *count)
+{
+ if (--(*count) == 0)
+ return NULL;
+ return sg + 1;
+}
+
/* Set up an indirect table of descriptors and add it to the queue. */
-static int vring_add_indirect(struct vring_virtqueue *vq,
- struct scatterlist sg[],
- unsigned int out,
- unsigned int in,
- gfp_t gfp)
+static inline int vring_add_indirect(struct vring_virtqueue *vq,
+ struct scatterlist *sgs[],
+ struct scatterlist *(*next)
+ (struct scatterlist *, unsigned int *),
+ unsigned int total_sg,
+ unsigned int total_out,
+ unsigned int total_in,
+ unsigned int out_sgs,
+ unsigned int in_sgs,
+ gfp_t gfp)
{
struct vring_desc *desc;
unsigned head;
- int i;
+ struct scatterlist *sg;
+ int i, n;
/*
* We require lowmem mappings for the descriptors because
@@ -137,25 +136,31 @@ static int vring_add_indirect(struct vring_virtqueue *vq,
*/
gfp &= ~(__GFP_HIGHMEM | __GFP_HIGH);
- desc = kmalloc((out + in) * sizeof(struct vring_desc), gfp);
+ desc = kmalloc(total_sg * sizeof(struct vring_desc), gfp);
if (!desc)
return -ENOMEM;
- /* Transfer entries from the sg list into the indirect page */
- for (i = 0; i < out; i++) {
- desc[i].flags = VRING_DESC_F_NEXT;
- desc[i].addr = sg_phys(sg);
- desc[i].len = sg->length;
- desc[i].next = i+1;
- sg++;
+ /* Transfer entries from the sg lists into the indirect page */
+ i = 0;
+ for (n = 0; n < out_sgs; n++) {
+ for (sg = sgs[n]; sg; sg = next(sg, &total_out)) {
+ desc[i].flags = VRING_DESC_F_NEXT;
+ desc[i].addr = sg_phys(sg);
+ desc[i].len = sg->length;
+ desc[i].next = i+1;
+ i++;
+ }
}
- for (; i < (out + in); i++) {
- desc[i].flags = VRING_DESC_F_NEXT|VRING_DESC_F_WRITE;
- desc[i].addr = sg_phys(sg);
- desc[i].len = sg->length;
- desc[i].next = i+1;
- sg++;
+ for (; n < (out_sgs + in_sgs); n++) {
+ for (sg = sgs[n]; sg; sg = next(sg, &total_in)) {
+ desc[i].flags = VRING_DESC_F_NEXT|VRING_DESC_F_WRITE;
+ desc[i].addr = sg_phys(sg);
+ desc[i].len = sg->length;
+ desc[i].next = i+1;
+ i++;
+ }
}
+ BUG_ON(i != total_sg);
/* Last one doesn't continue. */
desc[i-1].flags &= ~VRING_DESC_F_NEXT;
@@ -176,29 +181,20 @@ static int vring_add_indirect(struct vring_virtqueue *vq,
return head;
}
-/**
- * virtqueue_add_buf - expose buffer to other end
- * @vq: the struct virtqueue we're talking about.
- * @sg: the description of the buffer(s).
- * @out_num: the number of sg readable by other side
- * @in_num: the number of sg which are writable (after readable ones)
- * @data: the token identifying the buffer.
- * @gfp: how to do memory allocations (if necessary).
- *
- * Caller must ensure we don't call this with other virtqueue operations
- * at the same time (except where noted).
- *
- * Returns zero or a negative error (ie. ENOSPC, ENOMEM).
- */
-int virtqueue_add_buf(struct virtqueue *_vq,
- struct scatterlist sg[],
- unsigned int out,
- unsigned int in,
- void *data,
- gfp_t gfp)
+static inline int virtqueue_add(struct virtqueue *_vq,
+ struct scatterlist *sgs[],
+ struct scatterlist *(*next)
+ (struct scatterlist *, unsigned int *),
+ unsigned int total_out,
+ unsigned int total_in,
+ unsigned int out_sgs,
+ unsigned int in_sgs,
+ void *data,
+ gfp_t gfp)
{
struct vring_virtqueue *vq = to_vvq(_vq);
- unsigned int i, avail, uninitialized_var(prev);
+ struct scatterlist *sg;
+ unsigned int i, n, avail, uninitialized_var(prev), total_sg;
int head;
START_USE(vq);
@@ -218,46 +214,54 @@ int virtqueue_add_buf(struct virtqueue *_vq,
}
#endif
+ total_sg = total_in + total_out;
+
/* If the host supports indirect descriptor tables, and we have multiple
* buffers, then go indirect. FIXME: tune this threshold */
- if (vq->indirect && (out + in) > 1 && vq->vq.num_free) {
- head = vring_add_indirect(vq, sg, out, in, gfp);
+ if (vq->indirect && total_sg > 1 && vq->vq.num_free) {
+ head = vring_add_indirect(vq, sgs, next, total_sg, total_out,
+ total_in,
+ out_sgs, in_sgs, gfp);
if (likely(head >= 0))
goto add_head;
}
- BUG_ON(out + in > vq->vring.num);
- BUG_ON(out + in == 0);
+ BUG_ON(total_sg > vq->vring.num);
+ BUG_ON(total_sg == 0);
- if (vq->vq.num_free < out + in) {
+ if (vq->vq.num_free < total_sg) {
pr_debug("Can't add buf len %i - avail = %i\n",
- out + in, vq->vq.num_free);
+ total_sg, vq->vq.num_free);
/* FIXME: for historical reasons, we force a notify here if
* there are outgoing parts to the buffer. Presumably the
* host should service the ring ASAP. */
- if (out)
+ if (out_sgs)
vq->notify(&vq->vq);
END_USE(vq);
return -ENOSPC;
}
/* We're about to use some buffers from the free list. */
- vq->vq.num_free -= out + in;
-
- head = vq->free_head;
- for (i = vq->free_head; out; i = vq->vring.desc[i].next, out--) {
- vq->vring.desc[i].flags = VRING_DESC_F_NEXT;
- vq->vring.desc[i].addr = sg_phys(sg);
- vq->vring.desc[i].len = sg->length;
- prev = i;
- sg++;
+ vq->vq.num_free -= total_sg;
+
+ head = i = vq->free_head;
+ for (n = 0; n < out_sgs; n++) {
+ for (sg = sgs[n]; sg; sg = next(sg, &total_out)) {
+ vq->vring.desc[i].flags = VRING_DESC_F_NEXT;
+ vq->vring.desc[i].addr = sg_phys(sg);
+ vq->vring.desc[i].len = sg->length;
+ prev = i;
+ i = vq->vring.desc[i].next;
+ }
}
- for (; in; i = vq->vring.desc[i].next, in--) {
- vq->vring.desc[i].flags = VRING_DESC_F_NEXT|VRING_DESC_F_WRITE;
- vq->vring.desc[i].addr = sg_phys(sg);
- vq->vring.desc[i].len = sg->length;
- prev = i;
- sg++;
+ for (; n < (out_sgs + in_sgs); n++) {
+ for (sg = sgs[n]; sg; sg = next(sg, &total_in)) {
+ vq->vring.desc[i].flags = VRING_DESC_F_NEXT|VRING_DESC_F_WRITE;
+ vq->vring.desc[i].addr = sg_phys(sg);
+ vq->vring.desc[i].len = sg->length;
+ prev = i;
+ i = vq->vring.desc[i].next;
+ }
}
/* Last one doesn't continue. */
vq->vring.desc[prev].flags &= ~VRING_DESC_F_NEXT;
@@ -276,7 +280,7 @@ add_head:
/* Descriptors and available array need to be set before we expose the
* new available array entries. */
- virtio_wmb(vq);
+ virtio_wmb(vq->weak_barriers);
vq->vring.avail->idx++;
vq->num_added++;
@@ -290,9 +294,122 @@ add_head:
return 0;
}
+
+/**
+ * virtqueue_add_buf - expose buffer to other end
+ * @vq: the struct virtqueue we're talking about.
+ * @sg: the description of the buffer(s).
+ * @out_num: the number of sg readable by other side
+ * @in_num: the number of sg which are writable (after readable ones)
+ * @data: the token identifying the buffer.
+ * @gfp: how to do memory allocations (if necessary).
+ *
+ * Caller must ensure we don't call this with other virtqueue operations
+ * at the same time (except where noted).
+ *
+ * Returns zero or a negative error (ie. ENOSPC, ENOMEM).
+ */
+int virtqueue_add_buf(struct virtqueue *_vq,
+ struct scatterlist sg[],
+ unsigned int out,
+ unsigned int in,
+ void *data,
+ gfp_t gfp)
+{
+ struct scatterlist *sgs[2];
+
+ sgs[0] = sg;
+ sgs[1] = sg + out;
+
+ return virtqueue_add(_vq, sgs, sg_next_arr,
+ out, in, out ? 1 : 0, in ? 1 : 0, data, gfp);
+}
EXPORT_SYMBOL_GPL(virtqueue_add_buf);
/**
+ * virtqueue_add_sgs - expose buffers to other end
+ * @vq: the struct virtqueue we're talking about.
+ * @sgs: array of terminated scatterlists.
+ * @out_num: the number of scatterlists readable by other side
+ * @in_num: the number of scatterlists which are writable (after readable ones)
+ * @data: the token identifying the buffer.
+ * @gfp: how to do memory allocations (if necessary).
+ *
+ * Caller must ensure we don't call this with other virtqueue operations
+ * at the same time (except where noted).
+ *
+ * Returns zero or a negative error (ie. ENOSPC, ENOMEM).
+ */
+int virtqueue_add_sgs(struct virtqueue *_vq,
+ struct scatterlist *sgs[],
+ unsigned int out_sgs,
+ unsigned int in_sgs,
+ void *data,
+ gfp_t gfp)
+{
+ unsigned int i, total_out, total_in;
+
+ /* Count them first. */
+ for (i = total_out = total_in = 0; i < out_sgs; i++) {
+ struct scatterlist *sg;
+ for (sg = sgs[i]; sg; sg = sg_next(sg))
+ total_out++;
+ }
+ for (; i < out_sgs + in_sgs; i++) {
+ struct scatterlist *sg;
+ for (sg = sgs[i]; sg; sg = sg_next(sg))
+ total_in++;
+ }
+ return virtqueue_add(_vq, sgs, sg_next_chained,
+ total_out, total_in, out_sgs, in_sgs, data, gfp);
+}
+EXPORT_SYMBOL_GPL(virtqueue_add_sgs);
+
+/**
+ * virtqueue_add_outbuf - expose output buffers to other end
+ * @vq: the struct virtqueue we're talking about.
+ * @sgs: array of scatterlists (need not be terminated!)
+ * @num: the number of scatterlists readable by other side
+ * @data: the token identifying the buffer.
+ * @gfp: how to do memory allocations (if necessary).
+ *
+ * Caller must ensure we don't call this with other virtqueue operations
+ * at the same time (except where noted).
+ *
+ * Returns zero or a negative error (ie. ENOSPC, ENOMEM).
+ */
+int virtqueue_add_outbuf(struct virtqueue *vq,
+ struct scatterlist sg[], unsigned int num,
+ void *data,
+ gfp_t gfp)
+{
+ return virtqueue_add(vq, &sg, sg_next_arr, num, 0, 1, 0, data, gfp);
+}
+EXPORT_SYMBOL_GPL(virtqueue_add_outbuf);
+
+/**
+ * virtqueue_add_inbuf - expose input buffers to other end
+ * @vq: the struct virtqueue we're talking about.
+ * @sgs: array of scatterlists (need not be terminated!)
+ * @num: the number of scatterlists writable by other side
+ * @data: the token identifying the buffer.
+ * @gfp: how to do memory allocations (if necessary).
+ *
+ * Caller must ensure we don't call this with other virtqueue operations
+ * at the same time (except where noted).
+ *
+ * Returns zero or a negative error (ie. ENOSPC, ENOMEM).
+ */
+int virtqueue_add_inbuf(struct virtqueue *vq,
+ struct scatterlist sg[], unsigned int num,
+ void *data,
+ gfp_t gfp)
+{
+ return virtqueue_add(vq, &sg, sg_next_arr, 0, num, 0, 1, data, gfp);
+}
+EXPORT_SYMBOL_GPL(virtqueue_add_inbuf);
+
+/**
* virtqueue_kick_prepare - first half of split virtqueue_kick call.
* @vq: the struct virtqueue
*
@@ -312,7 +429,7 @@ bool virtqueue_kick_prepare(struct virtqueue *_vq)
START_USE(vq);
/* We need to expose available array entries before checking avail
* event. */
- virtio_mb(vq);
+ virtio_mb(vq->weak_barriers);
old = vq->vring.avail->idx - vq->num_added;
new = vq->vring.avail->idx;
@@ -436,7 +553,7 @@ void *virtqueue_get_buf(struct virtqueue *_vq, unsigned int *len)
}
/* Only get used array entries after they have been exposed by host. */
- virtio_rmb(vq);
+ virtio_rmb(vq->weak_barriers);
last_used = (vq->last_used_idx & (vq->vring.num - 1));
i = vq->vring.used->ring[last_used].id;
@@ -460,7 +577,7 @@ void *virtqueue_get_buf(struct virtqueue *_vq, unsigned int *len)
* the read in the next get_buf call. */
if (!(vq->vring.avail->flags & VRING_AVAIL_F_NO_INTERRUPT)) {
vring_used_event(&vq->vring) = vq->last_used_idx;
- virtio_mb(vq);
+ virtio_mb(vq->weak_barriers);
}
#ifdef DEBUG
@@ -513,7 +630,7 @@ bool virtqueue_enable_cb(struct virtqueue *_vq)
* entry. Always do both to keep code simple. */
vq->vring.avail->flags &= ~VRING_AVAIL_F_NO_INTERRUPT;
vring_used_event(&vq->vring) = vq->last_used_idx;
- virtio_mb(vq);
+ virtio_mb(vq->weak_barriers);
if (unlikely(more_used(vq))) {
END_USE(vq);
return false;
@@ -553,7 +670,7 @@ bool virtqueue_enable_cb_delayed(struct virtqueue *_vq)
/* TODO: tune this threshold */
bufs = (u16)(vq->vring.avail->idx - vq->last_used_idx) * 3 / 4;
vring_used_event(&vq->vring) = vq->last_used_idx + bufs;
- virtio_mb(vq);
+ virtio_mb(vq->weak_barriers);
if (unlikely((u16)(vq->vring.used->idx - vq->last_used_idx) > bufs)) {
END_USE(vq);
return false;