summaryrefslogtreecommitdiffstats
path: root/drivers/usb/musb/blackfin.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/musb/blackfin.c')
-rw-r--r--drivers/usb/musb/blackfin.c623
1 files changed, 0 insertions, 623 deletions
diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c
deleted file mode 100644
index 0a98dcd66d19..000000000000
--- a/drivers/usb/musb/blackfin.c
+++ /dev/null
@@ -1,623 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * MUSB OTG controller driver for Blackfin Processors
- *
- * Copyright 2006-2008 Analog Devices Inc.
- *
- * Enter bugs at http://blackfin.uclinux.org/
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/list.h>
-#include <linux/gpio.h>
-#include <linux/io.h>
-#include <linux/err.h>
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/prefetch.h>
-#include <linux/usb/usb_phy_generic.h>
-
-#include <asm/cacheflush.h>
-
-#include "musb_core.h"
-#include "musbhsdma.h"
-#include "blackfin.h"
-
-struct bfin_glue {
- struct device *dev;
- struct platform_device *musb;
- struct platform_device *phy;
-};
-#define glue_to_musb(g) platform_get_drvdata(g->musb)
-
-static u32 bfin_fifo_offset(u8 epnum)
-{
- return USB_OFFSET(USB_EP0_FIFO) + (epnum * 8);
-}
-
-static u8 bfin_readb(const void __iomem *addr, unsigned offset)
-{
- return (u8)(bfin_read16(addr + offset));
-}
-
-static u16 bfin_readw(const void __iomem *addr, unsigned offset)
-{
- return bfin_read16(addr + offset);
-}
-
-static u32 bfin_readl(const void __iomem *addr, unsigned offset)
-{
- return (u32)(bfin_read16(addr + offset));
-}
-
-static void bfin_writeb(void __iomem *addr, unsigned offset, u8 data)
-{
- bfin_write16(addr + offset, (u16)data);
-}
-
-static void bfin_writew(void __iomem *addr, unsigned offset, u16 data)
-{
- bfin_write16(addr + offset, data);
-}
-
-static void bfin_writel(void __iomem *addr, unsigned offset, u32 data)
-{
- bfin_write16(addr + offset, (u16)data);
-}
-
-/*
- * Load an endpoint's FIFO
- */
-static void bfin_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *src)
-{
- struct musb *musb = hw_ep->musb;
- void __iomem *fifo = hw_ep->fifo;
- void __iomem *epio = hw_ep->regs;
- u8 epnum = hw_ep->epnum;
-
- prefetch((u8 *)src);
-
- musb_writew(epio, MUSB_TXCOUNT, len);
-
- dev_dbg(musb->controller, "TX ep%d fifo %p count %d buf %p, epio %p\n",
- hw_ep->epnum, fifo, len, src, epio);
-
- dump_fifo_data(src, len);
-
- if (!ANOMALY_05000380 && epnum != 0) {
- u16 dma_reg;
-
- flush_dcache_range((unsigned long)src,
- (unsigned long)(src + len));
-
- /* Setup DMA address register */
- dma_reg = (u32)src;
- bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_LOW), dma_reg);
- SSYNC();
-
- dma_reg = (u32)src >> 16;
- bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_HIGH), dma_reg);
- SSYNC();
-
- /* Setup DMA count register */
- bfin_write16(USB_DMA_REG(epnum, USB_DMAx_COUNT_LOW), len);
- bfin_write16(USB_DMA_REG(epnum, USB_DMAx_COUNT_HIGH), 0);
- SSYNC();
-
- /* Enable the DMA */
- dma_reg = (epnum << 4) | DMA_ENA | INT_ENA | DIRECTION;
- bfin_write16(USB_DMA_REG(epnum, USB_DMAx_CTRL), dma_reg);
- SSYNC();
-
- /* Wait for complete */
- while (!(bfin_read_USB_DMA_INTERRUPT() & (1 << epnum)))
- cpu_relax();
-
- /* acknowledge dma interrupt */
- bfin_write_USB_DMA_INTERRUPT(1 << epnum);
- SSYNC();
-
- /* Reset DMA */
- bfin_write16(USB_DMA_REG(epnum, USB_DMAx_CTRL), 0);
- SSYNC();
- } else {
- SSYNC();
-
- if (unlikely((unsigned long)src & 0x01))
- outsw_8((unsigned long)fifo, src, (len + 1) >> 1);
- else
- outsw((unsigned long)fifo, src, (len + 1) >> 1);
- }
-}
-/*
- * Unload an endpoint's FIFO
- */
-static void bfin_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *dst)
-{
- struct musb *musb = hw_ep->musb;
- void __iomem *fifo = hw_ep->fifo;
- u8 epnum = hw_ep->epnum;
-
- if (ANOMALY_05000467 && epnum != 0) {
- u16 dma_reg;
-
- invalidate_dcache_range((unsigned long)dst,
- (unsigned long)(dst + len));
-
- /* Setup DMA address register */
- dma_reg = (u32)dst;
- bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_LOW), dma_reg);
- SSYNC();
-
- dma_reg = (u32)dst >> 16;
- bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_HIGH), dma_reg);
- SSYNC();
-
- /* Setup DMA count register */
- bfin_write16(USB_DMA_REG(epnum, USB_DMAx_COUNT_LOW), len);
- bfin_write16(USB_DMA_REG(epnum, USB_DMAx_COUNT_HIGH), 0);
- SSYNC();
-
- /* Enable the DMA */
- dma_reg = (epnum << 4) | DMA_ENA | INT_ENA;
- bfin_write16(USB_DMA_REG(epnum, USB_DMAx_CTRL), dma_reg);
- SSYNC();
-
- /* Wait for complete */
- while (!(bfin_read_USB_DMA_INTERRUPT() & (1 << epnum)))
- cpu_relax();
-
- /* acknowledge dma interrupt */
- bfin_write_USB_DMA_INTERRUPT(1 << epnum);
- SSYNC();
-
- /* Reset DMA */
- bfin_write16(USB_DMA_REG(epnum, USB_DMAx_CTRL), 0);
- SSYNC();
- } else {
- SSYNC();
- /* Read the last byte of packet with odd size from address fifo + 4
- * to trigger 1 byte access to EP0 FIFO.
- */
- if (len == 1)
- *dst = (u8)inw((unsigned long)fifo + 4);
- else {
- if (unlikely((unsigned long)dst & 0x01))
- insw_8((unsigned long)fifo, dst, len >> 1);
- else
- insw((unsigned long)fifo, dst, len >> 1);
-
- if (len & 0x01)
- *(dst + len - 1) = (u8)inw((unsigned long)fifo + 4);
- }
- }
- dev_dbg(musb->controller, "%cX ep%d fifo %p count %d buf %p\n",
- 'R', hw_ep->epnum, fifo, len, dst);
-
- dump_fifo_data(dst, len);
-}
-
-static irqreturn_t blackfin_interrupt(int irq, void *__hci)
-{
- unsigned long flags;
- irqreturn_t retval = IRQ_NONE;
- struct musb *musb = __hci;
-
- spin_lock_irqsave(&musb->lock, flags);
-
- musb->int_usb = musb_readb(musb->mregs, MUSB_INTRUSB);
- musb->int_tx = musb_readw(musb->mregs, MUSB_INTRTX);
- musb->int_rx = musb_readw(musb->mregs, MUSB_INTRRX);
-
- if (musb->int_usb || musb->int_tx || musb->int_rx) {
- musb_writeb(musb->mregs, MUSB_INTRUSB, musb->int_usb);
- musb_writew(musb->mregs, MUSB_INTRTX, musb->int_tx);
- musb_writew(musb->mregs, MUSB_INTRRX, musb->int_rx);
- retval = musb_interrupt(musb);
- }
-
- /* Start sampling ID pin, when plug is removed from MUSB */
- if ((musb->xceiv->otg->state == OTG_STATE_B_IDLE
- || musb->xceiv->otg->state == OTG_STATE_A_WAIT_BCON) ||
- (musb->int_usb & MUSB_INTR_DISCONNECT && is_host_active(musb))) {
- mod_timer(&musb->dev_timer, jiffies + TIMER_DELAY);
- musb->a_wait_bcon = TIMER_DELAY;
- }
-
- spin_unlock_irqrestore(&musb->lock, flags);
-
- return retval;
-}
-
-static void musb_conn_timer_handler(struct timer_list *t)
-{
- struct musb *musb = from_timer(musb, t, dev_timer);
- unsigned long flags;
- u16 val;
- static u8 toggle;
-
- spin_lock_irqsave(&musb->lock, flags);
- switch (musb->xceiv->otg->state) {
- case OTG_STATE_A_IDLE:
- case OTG_STATE_A_WAIT_BCON:
- /* Start a new session */
- val = musb_readw(musb->mregs, MUSB_DEVCTL);
- val &= ~MUSB_DEVCTL_SESSION;
- musb_writew(musb->mregs, MUSB_DEVCTL, val);
- val |= MUSB_DEVCTL_SESSION;
- musb_writew(musb->mregs, MUSB_DEVCTL, val);
- /* Check if musb is host or peripheral. */
- val = musb_readw(musb->mregs, MUSB_DEVCTL);
-
- if (!(val & MUSB_DEVCTL_BDEVICE)) {
- gpio_set_value(musb->config->gpio_vrsel, 1);
- musb->xceiv->otg->state = OTG_STATE_A_WAIT_BCON;
- } else {
- gpio_set_value(musb->config->gpio_vrsel, 0);
- /* Ignore VBUSERROR and SUSPEND IRQ */
- val = musb_readb(musb->mregs, MUSB_INTRUSBE);
- val &= ~MUSB_INTR_VBUSERROR;
- musb_writeb(musb->mregs, MUSB_INTRUSBE, val);
-
- val = MUSB_INTR_SUSPEND | MUSB_INTR_VBUSERROR;
- musb_writeb(musb->mregs, MUSB_INTRUSB, val);
- musb->xceiv->otg->state = OTG_STATE_B_IDLE;
- }
- mod_timer(&musb->dev_timer, jiffies + TIMER_DELAY);
- break;
- case OTG_STATE_B_IDLE:
- /*
- * Start a new session. It seems that MUSB needs taking
- * some time to recognize the type of the plug inserted?
- */
- val = musb_readw(musb->mregs, MUSB_DEVCTL);
- val |= MUSB_DEVCTL_SESSION;
- musb_writew(musb->mregs, MUSB_DEVCTL, val);
- val = musb_readw(musb->mregs, MUSB_DEVCTL);
-
- if (!(val & MUSB_DEVCTL_BDEVICE)) {
- gpio_set_value(musb->config->gpio_vrsel, 1);
- musb->xceiv->otg->state = OTG_STATE_A_WAIT_BCON;
- } else {
- gpio_set_value(musb->config->gpio_vrsel, 0);
-
- /* Ignore VBUSERROR and SUSPEND IRQ */
- val = musb_readb(musb->mregs, MUSB_INTRUSBE);
- val &= ~MUSB_INTR_VBUSERROR;
- musb_writeb(musb->mregs, MUSB_INTRUSBE, val);
-
- val = MUSB_INTR_SUSPEND | MUSB_INTR_VBUSERROR;
- musb_writeb(musb->mregs, MUSB_INTRUSB, val);
-
- /* Toggle the Soft Conn bit, so that we can response to
- * the inserting of either A-plug or B-plug.
- */
- if (toggle) {
- val = musb_readb(musb->mregs, MUSB_POWER);
- val &= ~MUSB_POWER_SOFTCONN;
- musb_writeb(musb->mregs, MUSB_POWER, val);
- toggle = 0;
- } else {
- val = musb_readb(musb->mregs, MUSB_POWER);
- val |= MUSB_POWER_SOFTCONN;
- musb_writeb(musb->mregs, MUSB_POWER, val);
- toggle = 1;
- }
- /* The delay time is set to 1/4 second by default,
- * shortening it, if accelerating A-plug detection
- * is needed in OTG mode.
- */
- mod_timer(&musb->dev_timer, jiffies + TIMER_DELAY / 4);
- }
- break;
- default:
- dev_dbg(musb->controller, "%s state not handled\n",
- usb_otg_state_string(musb->xceiv->otg->state));
- break;
- }
- spin_unlock_irqrestore(&musb->lock, flags);
-
- dev_dbg(musb->controller, "state is %s\n",
- usb_otg_state_string(musb->xceiv->otg->state));
-}
-
-static void bfin_musb_enable(struct musb *musb)
-{
- /* REVISIT is this really correct ? */
-}
-
-static void bfin_musb_disable(struct musb *musb)
-{
-}
-
-static void bfin_musb_set_vbus(struct musb *musb, int is_on)
-{
- int value = musb->config->gpio_vrsel_active;
- if (!is_on)
- value = !value;
- gpio_set_value(musb->config->gpio_vrsel, value);
-
- dev_dbg(musb->controller, "VBUS %s, devctl %02x "
- /* otg %3x conf %08x prcm %08x */ "\n",
- usb_otg_state_string(musb->xceiv->otg->state),
- musb_readb(musb->mregs, MUSB_DEVCTL));
-}
-
-static int bfin_musb_set_power(struct usb_phy *x, unsigned mA)
-{
- return 0;
-}
-
-static int bfin_musb_vbus_status(struct musb *musb)
-{
- return 0;
-}
-
-static int bfin_musb_set_mode(struct musb *musb, u8 musb_mode)
-{
- return -EIO;
-}
-
-static int bfin_musb_adjust_channel_params(struct dma_channel *channel,
- u16 packet_sz, u8 *mode,
- dma_addr_t *dma_addr, u32 *len)
-{
- struct musb_dma_channel *musb_channel = channel->private_data;
-
- /*
- * Anomaly 05000450 might cause data corruption when using DMA
- * MODE 1 transmits with short packet. So to work around this,
- * we truncate all MODE 1 transfers down to a multiple of the
- * max packet size, and then do the last short packet transfer
- * (if there is any) using MODE 0.
- */
- if (ANOMALY_05000450) {
- if (musb_channel->transmit && *mode == 1)
- *len = *len - (*len % packet_sz);
- }
-
- return 0;
-}
-
-static void bfin_musb_reg_init(struct musb *musb)
-{
- if (ANOMALY_05000346) {
- bfin_write_USB_APHY_CALIB(ANOMALY_05000346_value);
- SSYNC();
- }
-
- if (ANOMALY_05000347) {
- bfin_write_USB_APHY_CNTRL(0x0);
- SSYNC();
- }
-
- /* Configure PLL oscillator register */
- bfin_write_USB_PLLOSC_CTRL(0x3080 |
- ((480/musb->config->clkin) << 1));
- SSYNC();
-
- bfin_write_USB_SRP_CLKDIV((get_sclk()/1000) / 32 - 1);
- SSYNC();
-
- bfin_write_USB_EP_NI0_RXMAXP(64);
- SSYNC();
-
- bfin_write_USB_EP_NI0_TXMAXP(64);
- SSYNC();
-
- /* Route INTRUSB/INTR_RX/INTR_TX to USB_INT0*/
- bfin_write_USB_GLOBINTR(0x7);
- SSYNC();
-
- bfin_write_USB_GLOBAL_CTL(GLOBAL_ENA | EP1_TX_ENA | EP2_TX_ENA |
- EP3_TX_ENA | EP4_TX_ENA | EP5_TX_ENA |
- EP6_TX_ENA | EP7_TX_ENA | EP1_RX_ENA |
- EP2_RX_ENA | EP3_RX_ENA | EP4_RX_ENA |
- EP5_RX_ENA | EP6_RX_ENA | EP7_RX_ENA);
- SSYNC();
-}
-
-static int bfin_musb_init(struct musb *musb)
-{
-
- /*
- * Rev 1.0 BF549 EZ-KITs require PE7 to be high for both DEVICE
- * and OTG HOST modes, while rev 1.1 and greater require PE7 to
- * be low for DEVICE mode and high for HOST mode. We set it high
- * here because we are in host mode
- */
-
- if (gpio_request(musb->config->gpio_vrsel, "USB_VRSEL")) {
- printk(KERN_ERR "Failed ro request USB_VRSEL GPIO_%d\n",
- musb->config->gpio_vrsel);
- return -ENODEV;
- }
- gpio_direction_output(musb->config->gpio_vrsel, 0);
-
- musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
- if (IS_ERR_OR_NULL(musb->xceiv)) {
- gpio_free(musb->config->gpio_vrsel);
- return -EPROBE_DEFER;
- }
-
- bfin_musb_reg_init(musb);
-
- timer_setup(&musb->dev_timer, musb_conn_timer_handler, 0);
-
- musb->xceiv->set_power = bfin_musb_set_power;
-
- musb->isr = blackfin_interrupt;
- musb->double_buffer_not_ok = true;
-
- return 0;
-}
-
-static int bfin_musb_exit(struct musb *musb)
-{
- gpio_free(musb->config->gpio_vrsel);
- usb_put_phy(musb->xceiv);
-
- return 0;
-}
-
-static const struct musb_platform_ops bfin_ops = {
- .quirks = MUSB_DMA_INVENTRA,
- .init = bfin_musb_init,
- .exit = bfin_musb_exit,
-
- .fifo_offset = bfin_fifo_offset,
- .readb = bfin_readb,
- .writeb = bfin_writeb,
- .readw = bfin_readw,
- .writew = bfin_writew,
- .readl = bfin_readl,
- .writel = bfin_writel,
- .fifo_mode = 2,
- .read_fifo = bfin_read_fifo,
- .write_fifo = bfin_write_fifo,
-#ifdef CONFIG_USB_INVENTRA_DMA
- .dma_init = musbhs_dma_controller_create,
- .dma_exit = musbhs_dma_controller_destroy,
-#endif
- .enable = bfin_musb_enable,
- .disable = bfin_musb_disable,
-
- .set_mode = bfin_musb_set_mode,
-
- .vbus_status = bfin_musb_vbus_status,
- .set_vbus = bfin_musb_set_vbus,
-
- .adjust_channel_params = bfin_musb_adjust_channel_params,
-};
-
-static u64 bfin_dmamask = DMA_BIT_MASK(32);
-
-static int bfin_probe(struct platform_device *pdev)
-{
- struct resource musb_resources[2];
- struct musb_hdrc_platform_data *pdata = dev_get_platdata(&pdev->dev);
- struct platform_device *musb;
- struct bfin_glue *glue;
-
- int ret = -ENOMEM;
-
- glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL);
- if (!glue)
- goto err0;
-
- musb = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO);
- if (!musb)
- goto err0;
-
- musb->dev.parent = &pdev->dev;
- musb->dev.dma_mask = &bfin_dmamask;
- musb->dev.coherent_dma_mask = bfin_dmamask;
-
- glue->dev = &pdev->dev;
- glue->musb = musb;
-
- pdata->platform_ops = &bfin_ops;
-
- glue->phy = usb_phy_generic_register();
- if (IS_ERR(glue->phy))
- goto err1;
- platform_set_drvdata(pdev, glue);
-
- memset(musb_resources, 0x00, sizeof(*musb_resources) *
- ARRAY_SIZE(musb_resources));
-
- musb_resources[0].name = pdev->resource[0].name;
- musb_resources[0].start = pdev->resource[0].start;
- musb_resources[0].end = pdev->resource[0].end;
- musb_resources[0].flags = pdev->resource[0].flags;
-
- musb_resources[1].name = pdev->resource[1].name;
- musb_resources[1].start = pdev->resource[1].start;
- musb_resources[1].end = pdev->resource[1].end;
- musb_resources[1].flags = pdev->resource[1].flags;
-
- ret = platform_device_add_resources(musb, musb_resources,
- ARRAY_SIZE(musb_resources));
- if (ret) {
- dev_err(&pdev->dev, "failed to add resources\n");
- goto err2;
- }
-
- ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
- if (ret) {
- dev_err(&pdev->dev, "failed to add platform_data\n");
- goto err2;
- }
-
- ret = platform_device_add(musb);
- if (ret) {
- dev_err(&pdev->dev, "failed to register musb device\n");
- goto err2;
- }
-
- return 0;
-
-err2:
- usb_phy_generic_unregister(glue->phy);
-
-err1:
- platform_device_put(musb);
-
-err0:
- return ret;
-}
-
-static int bfin_remove(struct platform_device *pdev)
-{
- struct bfin_glue *glue = platform_get_drvdata(pdev);
-
- platform_device_unregister(glue->musb);
- usb_phy_generic_unregister(glue->phy);
-
- return 0;
-}
-
-static int __maybe_unused bfin_suspend(struct device *dev)
-{
- struct bfin_glue *glue = dev_get_drvdata(dev);
- struct musb *musb = glue_to_musb(glue);
-
- if (is_host_active(musb))
- /*
- * During hibernate gpio_vrsel will change from high to low
- * low which will generate wakeup event resume the system
- * immediately. Set it to 0 before hibernate to avoid this
- * wakeup event.
- */
- gpio_set_value(musb->config->gpio_vrsel, 0);
-
- return 0;
-}
-
-static int __maybe_unused bfin_resume(struct device *dev)
-{
- struct bfin_glue *glue = dev_get_drvdata(dev);
- struct musb *musb = glue_to_musb(glue);
-
- bfin_musb_reg_init(musb);
-
- return 0;
-}
-
-static SIMPLE_DEV_PM_OPS(bfin_pm_ops, bfin_suspend, bfin_resume);
-
-static struct platform_driver bfin_driver = {
- .probe = bfin_probe,
- .remove = bfin_remove,
- .driver = {
- .name = "musb-blackfin",
- .pm = &bfin_pm_ops,
- },
-};
-
-MODULE_DESCRIPTION("Blackfin MUSB Glue Layer");
-MODULE_AUTHOR("Bryan Wy <cooloney@kernel.org>");
-MODULE_LICENSE("GPL v2");
-module_platform_driver(bfin_driver);