summaryrefslogtreecommitdiffstats
path: root/drivers/tty/serial
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/tty/serial')
-rw-r--r--drivers/tty/serial/cpm_uart/cpm_uart_core.c2
-rw-r--r--drivers/tty/serial/crisv10.c4
-rw-r--r--drivers/tty/serial/ifx6x60.c2
-rw-r--r--drivers/tty/serial/ioc3_serial.c2
-rw-r--r--drivers/tty/serial/ioc4_serial.c2
-rw-r--r--drivers/tty/serial/max3100.c2
-rw-r--r--drivers/tty/serial/mpsc.c2
-rw-r--r--drivers/tty/serial/mrst_max3110.c2
-rw-r--r--drivers/tty/serial/msm_serial_hs.c2
-rw-r--r--drivers/tty/serial/serial_core.c7
10 files changed, 13 insertions, 14 deletions
diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_core.c b/drivers/tty/serial/cpm_uart/cpm_uart_core.c
index 108122f8f3c2..0bb24378a3c0 100644
--- a/drivers/tty/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/tty/serial/cpm_uart/cpm_uart_core.c
@@ -508,7 +508,7 @@ static void cpm_uart_set_termios(struct uart_port *port,
baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16);
if (baud < HW_BUF_SPD_THRESHOLD ||
- (pinfo->port.state && pinfo->port.state->port.tty->low_latency))
+ (pinfo->port.state && pinfo->port.state->port.low_latency))
pinfo->rx_fifosize = 1;
else
pinfo->rx_fifosize = RX_BUF_SIZE;
diff --git a/drivers/tty/serial/crisv10.c b/drivers/tty/serial/crisv10.c
index c82601d4dc53..52449adc09ac 100644
--- a/drivers/tty/serial/crisv10.c
+++ b/drivers/tty/serial/crisv10.c
@@ -3462,7 +3462,7 @@ set_serial_info(struct e100_serial *info,
info->type = new_serial.type;
info->close_delay = new_serial.close_delay;
info->closing_wait = new_serial.closing_wait;
- info->port.tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
+ info->port.low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
check_and_exit:
if (info->flags & ASYNC_INITIALIZED) {
@@ -4106,7 +4106,7 @@ rs_open(struct tty_struct *tty, struct file * filp)
tty->driver_data = info;
info->port.tty = tty;
- tty->low_latency = !!(info->flags & ASYNC_LOW_LATENCY);
+ info->port.low_latency = !!(info->flags & ASYNC_LOW_LATENCY);
/*
* If the port is in the middle of closing, bail out now
diff --git a/drivers/tty/serial/ifx6x60.c b/drivers/tty/serial/ifx6x60.c
index bfb634ea8145..4bc6e47890b4 100644
--- a/drivers/tty/serial/ifx6x60.c
+++ b/drivers/tty/serial/ifx6x60.c
@@ -615,7 +615,7 @@ static int ifx_port_activate(struct tty_port *port, struct tty_struct *tty)
tty->driver_data = ifx_dev;
/* allows flip string push from int context */
- tty->low_latency = 1;
+ port->low_latency = 1;
/* set flag to allows data transfer */
set_bit(IFX_SPI_STATE_IO_AVAILABLE, &ifx_dev->flags);
diff --git a/drivers/tty/serial/ioc3_serial.c b/drivers/tty/serial/ioc3_serial.c
index 0f25ce49c7f9..edbdc4e45075 100644
--- a/drivers/tty/serial/ioc3_serial.c
+++ b/drivers/tty/serial/ioc3_serial.c
@@ -1000,7 +1000,7 @@ ioc3_change_speed(struct uart_port *the_port,
the_port->ignore_status_mask = N_ALL_INPUT;
- state->port.tty->low_latency = 1;
+ state->port.low_latency = 1;
if (iflag & IGNPAR)
the_port->ignore_status_mask &= ~(N_PARITY_ERROR
diff --git a/drivers/tty/serial/ioc4_serial.c b/drivers/tty/serial/ioc4_serial.c
index 3b021b03ae56..86f64ed89b45 100644
--- a/drivers/tty/serial/ioc4_serial.c
+++ b/drivers/tty/serial/ioc4_serial.c
@@ -1740,7 +1740,7 @@ ioc4_change_speed(struct uart_port *the_port,
the_port->ignore_status_mask = N_ALL_INPUT;
- state->port.tty->low_latency = 1;
+ state->port.low_latency = 1;
if (iflag & IGNPAR)
the_port->ignore_status_mask &= ~(N_PARITY_ERROR
diff --git a/drivers/tty/serial/max3100.c b/drivers/tty/serial/max3100.c
index 7ce3197087bb..e238e80cd981 100644
--- a/drivers/tty/serial/max3100.c
+++ b/drivers/tty/serial/max3100.c
@@ -530,7 +530,7 @@ max3100_set_termios(struct uart_port *port, struct ktermios *termios,
MAX3100_STATUS_OE;
/* we are sending char from a workqueue so enable */
- s->port.state->port.tty->low_latency = 1;
+ s->port.state->port.low_latency = 1;
if (s->poll_time > 0)
del_timer_sync(&s->timer);
diff --git a/drivers/tty/serial/mpsc.c b/drivers/tty/serial/mpsc.c
index 4bcbc66c48c4..6f2d2ceb326a 100644
--- a/drivers/tty/serial/mpsc.c
+++ b/drivers/tty/serial/mpsc.c
@@ -970,7 +970,7 @@ static int mpsc_rx_intr(struct mpsc_port_info *pi)
#endif
/* Following use of tty struct directly is deprecated */
if (tty_buffer_request_room(port, bytes_in) < bytes_in) {
- if (tty->low_latency)
+ if (port->low_latency)
tty_flip_buffer_push(tty);
/*
* If this failed then we will throw away the bytes
diff --git a/drivers/tty/serial/mrst_max3110.c b/drivers/tty/serial/mrst_max3110.c
index 3b8df7b93b73..4632db7a24b7 100644
--- a/drivers/tty/serial/mrst_max3110.c
+++ b/drivers/tty/serial/mrst_max3110.c
@@ -495,7 +495,7 @@ static int serial_m3110_startup(struct uart_port *port)
| WC_BAUD_DR2;
/* as we use thread to handle tx/rx, need set low latency */
- port->state->port.tty->low_latency = 1;
+ port->state->port.low_latency = 1;
if (max->irq) {
max->read_thread = NULL;
diff --git a/drivers/tty/serial/msm_serial_hs.c b/drivers/tty/serial/msm_serial_hs.c
index 11b7f5b2eb5f..c356ffff3c71 100644
--- a/drivers/tty/serial/msm_serial_hs.c
+++ b/drivers/tty/serial/msm_serial_hs.c
@@ -1400,7 +1400,7 @@ static int msm_hs_startup(struct uart_port *uport)
/* do not let tty layer execute RX in global workqueue, use a
* dedicated workqueue managed by this driver */
- uport->state->port.tty->low_latency = 1;
+ uport->state->port.low_latency = 1;
/* turn on uart clk */
ret = msm_hs_init_clk_locked(uport);
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index 675343a20f24..b5c4e64f2990 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -867,9 +867,7 @@ static int uart_set_info(struct tty_struct *tty, struct tty_port *port,
port->closing_wait = closing_wait;
if (new_info->xmit_fifo_size)
uport->fifosize = new_info->xmit_fifo_size;
- if (port->tty)
- port->tty->low_latency =
- (uport->flags & UPF_LOW_LATENCY) ? 1 : 0;
+ port->low_latency = (uport->flags & UPF_LOW_LATENCY) ? 1 : 0;
check_and_exit:
retval = 0;
@@ -1565,7 +1563,8 @@ static int uart_open(struct tty_struct *tty, struct file *filp)
*/
tty->driver_data = state;
state->uart_port->state = state;
- tty->low_latency = (state->uart_port->flags & UPF_LOW_LATENCY) ? 1 : 0;
+ state->port.low_latency =
+ (state->uart_port->flags & UPF_LOW_LATENCY) ? 1 : 0;
tty_port_tty_set(port, tty);
/*