diff options
Diffstat (limited to 'drivers/tty/serial')
84 files changed, 4289 insertions, 1064 deletions
diff --git a/drivers/tty/serial/21285.c b/drivers/tty/serial/21285.c index a44345a2dbb4..c7e8b60b6177 100644 --- a/drivers/tty/serial/21285.c +++ b/drivers/tty/serial/21285.c @@ -85,7 +85,6 @@ static void serial21285_enable_ms(struct uart_port *port) static irqreturn_t serial21285_rx_chars(int irq, void *dev_id) { struct uart_port *port = dev_id; - struct tty_struct *tty = port->state->port.tty; unsigned int status, ch, flag, rxs, max_count = 256; status = *CSR_UARTFLG; @@ -115,7 +114,7 @@ static irqreturn_t serial21285_rx_chars(int irq, void *dev_id) status = *CSR_UARTFLG; } - tty_flip_buffer_push(tty); + tty_flip_buffer_push(&port->state->port); return IRQ_HANDLED; } diff --git a/drivers/tty/serial/68328serial.c b/drivers/tty/serial/68328serial.c index f99a84526f82..49399470794d 100644 --- a/drivers/tty/serial/68328serial.c +++ b/drivers/tty/serial/68328serial.c @@ -262,8 +262,7 @@ static void rs_start(struct tty_struct *tty) local_irq_restore(flags); } -static void receive_chars(struct m68k_serial *info, struct tty_struct *tty, - unsigned short rx) +static void receive_chars(struct m68k_serial *info, unsigned short rx) { m68328_uart *uart = &uart_addr[info->line]; unsigned char ch, flag; @@ -293,9 +292,6 @@ static void receive_chars(struct m68k_serial *info, struct tty_struct *tty, } } - if(!tty) - goto clear_and_exit; - flag = TTY_NORMAL; if (rx & URX_PARITY_ERROR) @@ -305,15 +301,12 @@ static void receive_chars(struct m68k_serial *info, struct tty_struct *tty, else if (rx & URX_FRAME_ERROR) flag = TTY_FRAME; - tty_insert_flip_char(tty, ch, flag); + tty_insert_flip_char(&info->tport, ch, flag); #ifndef CONFIG_XCOPILOT_BUGS } while((rx = uart->urx.w) & URX_DATA_READY); #endif - tty_schedule_flip(tty); - -clear_and_exit: - return; + tty_schedule_flip(&info->tport); } static void transmit_chars(struct m68k_serial *info, struct tty_struct *tty) @@ -367,11 +360,11 @@ irqreturn_t rs_interrupt(int irq, void *dev_id) tx = uart->utx.w; if (rx & URX_DATA_READY) - receive_chars(info, tty, rx); + receive_chars(info, rx); if (tx & UTX_TX_AVAIL) transmit_chars(info, tty); #else - receive_chars(info, tty, rx); + receive_chars(info, rx); #endif tty_kref_put(tty); @@ -1009,7 +1002,7 @@ static void rs_close(struct tty_struct *tty, struct file * filp) m68328_uart *uart = &uart_addr[info->line]; unsigned long flags; - if (!info || serial_paranoia_check(info, tty->name, "rs_close")) + if (serial_paranoia_check(info, tty->name, "rs_close")) return; local_irq_save(flags); diff --git a/drivers/tty/serial/8250/8250.c b/drivers/tty/serial/8250/8250.c index f9320437a649..0efc815a4968 100644 --- a/drivers/tty/serial/8250/8250.c +++ b/drivers/tty/serial/8250/8250.c @@ -239,13 +239,6 @@ static const struct serial8250_config uart_config[] = { .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, .flags = UART_CAP_FIFO | UART_CAP_UUE | UART_CAP_RTOIE, }, - [PORT_RM9000] = { - .name = "RM9000", - .fifo_size = 16, - .tx_loadsz = 16, - .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, - .flags = UART_CAP_FIFO, - }, [PORT_OCTEON] = { .name = "OCTEON", .fifo_size = 64, @@ -324,9 +317,9 @@ static void default_serial_dl_write(struct uart_8250_port *up, int value) serial_out(up, UART_DLM, value >> 8 & 0xff); } -#ifdef CONFIG_MIPS_ALCHEMY +#if defined(CONFIG_MIPS_ALCHEMY) || defined(CONFIG_SERIAL_8250_RT288X) -/* Au1x00 UART hardware has a weird register layout */ +/* Au1x00/RT288x UART hardware has a weird register layout */ static const u8 au_io_in_map[] = { [UART_RX] = 0, [UART_IER] = 2, @@ -370,56 +363,6 @@ static void au_serial_dl_write(struct uart_8250_port *up, int value) #endif -#ifdef CONFIG_SERIAL_8250_RM9K - -static const u8 - regmap_in[8] = { - [UART_RX] = 0x00, - [UART_IER] = 0x0c, - [UART_IIR] = 0x14, - [UART_LCR] = 0x1c, - [UART_MCR] = 0x20, - [UART_LSR] = 0x24, - [UART_MSR] = 0x28, - [UART_SCR] = 0x2c - }, - regmap_out[8] = { - [UART_TX] = 0x04, - [UART_IER] = 0x0c, - [UART_FCR] = 0x18, - [UART_LCR] = 0x1c, - [UART_MCR] = 0x20, - [UART_LSR] = 0x24, - [UART_MSR] = 0x28, - [UART_SCR] = 0x2c - }; - -static unsigned int rm9k_serial_in(struct uart_port *p, int offset) -{ - offset = regmap_in[offset] << p->regshift; - return readl(p->membase + offset); -} - -static void rm9k_serial_out(struct uart_port *p, int offset, int value) -{ - offset = regmap_out[offset] << p->regshift; - writel(value, p->membase + offset); -} - -static int rm9k_serial_dl_read(struct uart_8250_port *up) -{ - return ((__raw_readl(up->port.membase + 0x10) << 8) | - (__raw_readl(up->port.membase + 0x08) & 0xff)) & 0xffff; -} - -static void rm9k_serial_dl_write(struct uart_8250_port *up, int value) -{ - __raw_writel(value, up->port.membase + 0x08); - __raw_writel(value >> 8, up->port.membase + 0x10); -} - -#endif - static unsigned int hub6_serial_in(struct uart_port *p, int offset) { offset = offset << p->regshift; @@ -497,16 +440,7 @@ static void set_io_from_upio(struct uart_port *p) p->serial_out = mem32_serial_out; break; -#ifdef CONFIG_SERIAL_8250_RM9K - case UPIO_RM9000: - p->serial_in = rm9k_serial_in; - p->serial_out = rm9k_serial_out; - up->dl_read = rm9k_serial_dl_read; - up->dl_write = rm9k_serial_dl_write; - break; -#endif - -#ifdef CONFIG_MIPS_ALCHEMY +#if defined(CONFIG_MIPS_ALCHEMY) || defined(CONFIG_SERIAL_8250_RT288X) case UPIO_AU: p->serial_in = au_serial_in; p->serial_out = au_serial_out; @@ -1341,7 +1275,9 @@ static void serial8250_start_tx(struct uart_port *port) struct uart_8250_port *up = container_of(port, struct uart_8250_port, port); - if (!(up->ier & UART_IER_THRI)) { + if (up->dma && !serial8250_tx_dma(up)) { + return; + } else if (!(up->ier & UART_IER_THRI)) { up->ier |= UART_IER_THRI; serial_port_out(port, UART_IER, up->ier); @@ -1349,9 +1285,7 @@ static void serial8250_start_tx(struct uart_port *port) unsigned char lsr; lsr = serial_in(up, UART_LSR); up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS; - if ((port->type == PORT_RM9000) ? - (lsr & UART_LSR_THRE) : - (lsr & UART_LSR_TEMT)) + if (lsr & UART_LSR_TEMT) serial8250_tx_chars(up); } } @@ -1397,7 +1331,6 @@ unsigned char serial8250_rx_chars(struct uart_8250_port *up, unsigned char lsr) { struct uart_port *port = &up->port; - struct tty_struct *tty = port->state->port.tty; unsigned char ch; int max_count = 256; char flag; @@ -1462,7 +1395,7 @@ ignore_char: lsr = serial_in(up, UART_LSR); } while ((lsr & (UART_LSR_DR | UART_LSR_BI)) && (max_count-- > 0)); spin_unlock(&port->lock); - tty_flip_buffer_push(tty); + tty_flip_buffer_push(&port->state->port); spin_lock(&port->lock); return lsr; } @@ -1547,6 +1480,7 @@ int serial8250_handle_irq(struct uart_port *port, unsigned int iir) unsigned long flags; struct uart_8250_port *up = container_of(port, struct uart_8250_port, port); + int dma_err = 0; if (iir & UART_IIR_NO_INT) return 0; @@ -1557,8 +1491,13 @@ int serial8250_handle_irq(struct uart_port *port, unsigned int iir) DEBUG_INTR("status = %x...", status); - if (status & (UART_LSR_DR | UART_LSR_BI)) - status = serial8250_rx_chars(up, status); + if (status & (UART_LSR_DR | UART_LSR_BI)) { + if (up->dma) + dma_err = serial8250_rx_dma(up, iir); + + if (!up->dma || dma_err) + status = serial8250_rx_chars(up, status); + } serial8250_modem_status(up); if (status & UART_LSR_THRE) serial8250_tx_chars(up); @@ -1991,9 +1930,12 @@ static int serial8250_startup(struct uart_port *port) if (port->type == PORT_8250_CIR) return -ENODEV; - port->fifosize = uart_config[up->port.type].fifo_size; - up->tx_loadsz = uart_config[up->port.type].tx_loadsz; - up->capabilities = uart_config[up->port.type].flags; + if (!port->fifosize) + port->fifosize = uart_config[port->type].fifo_size; + if (!up->tx_loadsz) + up->tx_loadsz = uart_config[port->type].tx_loadsz; + if (!up->capabilities) + up->capabilities = uart_config[port->type].flags; up->mcr = 0; if (port->iotype != up->cur_iotype) @@ -2198,6 +2140,18 @@ dont_test_tx_en: up->msr_saved_flags = 0; /* + * Request DMA channels for both RX and TX. + */ + if (up->dma) { + retval = serial8250_request_dma(up); + if (retval) { + pr_warn_ratelimited("ttyS%d - failed to request DMA\n", + serial_index(port)); + up->dma = NULL; + } + } + + /* * Finally, enable interrupts. Note: Modem status interrupts * are set via set_termios(), which will be occurring imminently * anyway, so we don't enable them here. @@ -2230,6 +2184,9 @@ static void serial8250_shutdown(struct uart_port *port) up->ier = 0; serial_port_out(port, UART_IER, 0); + if (up->dma) + serial8250_release_dma(up); + spin_lock_irqsave(&port->lock, flags); if (port->flags & UPF_FOURPORT) { /* reset interrupts on the AST Fourport board */ @@ -2826,9 +2783,12 @@ static void serial8250_init_fixed_type_port(struct uart_8250_port *up, unsigned int type) { up->port.type = type; - up->port.fifosize = uart_config[type].fifo_size; - up->capabilities = uart_config[type].flags; - up->tx_loadsz = uart_config[type].tx_loadsz; + if (!up->port.fifosize) + up->port.fifosize = uart_config[type].fifo_size; + if (!up->tx_loadsz) + up->tx_loadsz = uart_config[type].tx_loadsz; + if (!up->capabilities) + up->capabilities = uart_config[type].flags; } static void __init @@ -3262,6 +3222,10 @@ int serial8250_register_8250_port(struct uart_8250_port *up) uart->bugs = up->bugs; uart->port.mapbase = up->port.mapbase; uart->port.private_data = up->port.private_data; + uart->port.fifosize = up->port.fifosize; + uart->tx_loadsz = up->tx_loadsz; + uart->capabilities = up->capabilities; + if (up->port.dev) uart->port.dev = up->port.dev; @@ -3287,6 +3251,8 @@ int serial8250_register_8250_port(struct uart_8250_port *up) uart->dl_read = up->dl_read; if (up->dl_write) uart->dl_write = up->dl_write; + if (up->dma) + uart->dma = up->dma; if (serial8250_isa_config != NULL) serial8250_isa_config(0, &uart->port, diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h index 12caa1292b75..34eb676916fe 100644 --- a/drivers/tty/serial/8250/8250.h +++ b/drivers/tty/serial/8250/8250.h @@ -12,6 +12,35 @@ */ #include <linux/serial_8250.h> +#include <linux/dmaengine.h> + +struct uart_8250_dma { + dma_filter_fn fn; + void *rx_param; + void *tx_param; + + int rx_chan_id; + int tx_chan_id; + + struct dma_slave_config rxconf; + struct dma_slave_config txconf; + + struct dma_chan *rxchan; + struct dma_chan *txchan; + + dma_addr_t rx_addr; + dma_addr_t tx_addr; + + dma_cookie_t rx_cookie; + dma_cookie_t tx_cookie; + + void *rx_buf; + + size_t rx_size; + size_t tx_size; + + unsigned char tx_running:1; +}; struct old_serial_port { unsigned int uart; @@ -143,3 +172,24 @@ static inline int is_omap1510_8250(struct uart_8250_port *pt) return 0; } #endif + +#ifdef CONFIG_SERIAL_8250_DMA +extern int serial8250_tx_dma(struct uart_8250_port *); +extern int serial8250_rx_dma(struct uart_8250_port *, unsigned int iir); +extern int serial8250_request_dma(struct uart_8250_port *); +extern void serial8250_release_dma(struct uart_8250_port *); +#else +static inline int serial8250_tx_dma(struct uart_8250_port *p) +{ + return -1; +} +static inline int serial8250_rx_dma(struct uart_8250_port *p, unsigned int iir) +{ + return -1; +} +static inline int serial8250_request_dma(struct uart_8250_port *p) +{ + return -1; +} +static inline void serial8250_release_dma(struct uart_8250_port *p) { } +#endif diff --git a/drivers/tty/serial/8250/8250_dma.c b/drivers/tty/serial/8250/8250_dma.c new file mode 100644 index 000000000000..b9f7fd28112e --- /dev/null +++ b/drivers/tty/serial/8250/8250_dma.c @@ -0,0 +1,216 @@ +/* + * 8250_dma.c - DMA Engine API support for 8250.c + * + * Copyright (C) 2013 Intel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#include <linux/tty.h> +#include <linux/tty_flip.h> +#include <linux/serial_reg.h> +#include <linux/dma-mapping.h> + +#include "8250.h" + +static void __dma_tx_complete(void *param) +{ + struct uart_8250_port *p = param; + struct uart_8250_dma *dma = p->dma; + struct circ_buf *xmit = &p->port.state->xmit; + + dma->tx_running = 0; + + dma_sync_single_for_cpu(dma->txchan->device->dev, dma->tx_addr, + UART_XMIT_SIZE, DMA_TO_DEVICE); + + xmit->tail += dma->tx_size; + xmit->tail &= UART_XMIT_SIZE - 1; + p->port.icount.tx += dma->tx_size; + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&p->port); + + if (!uart_circ_empty(xmit) && !uart_tx_stopped(&p->port)) { + serial8250_tx_dma(p); + uart_write_wakeup(&p->port); + } +} + +static void __dma_rx_complete(void *param) +{ + struct uart_8250_port *p = param; + struct uart_8250_dma *dma = p->dma; + struct tty_port *tty_port = &p->port.state->port; + struct dma_tx_state state; + int count; + + dma_sync_single_for_cpu(dma->rxchan->device->dev, dma->rx_addr, + dma->rx_size, DMA_FROM_DEVICE); + + dmaengine_tx_status(dma->rxchan, dma->rx_cookie, &state); + dmaengine_terminate_all(dma->rxchan); + + count = dma->rx_size - state.residue; + + tty_insert_flip_string(tty_port, dma->rx_buf, count); + p->port.icount.rx += count; + + tty_flip_buffer_push(tty_port); +} + +int serial8250_tx_dma(struct uart_8250_port *p) +{ + struct uart_8250_dma *dma = p->dma; + struct circ_buf *xmit = &p->port.state->xmit; + struct dma_async_tx_descriptor *desc; + |