summaryrefslogtreecommitdiffstats
path: root/drivers/tty/serial/clps711x.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/tty/serial/clps711x.c')
-rw-r--r--drivers/tty/serial/clps711x.c595
1 files changed, 277 insertions, 318 deletions
diff --git a/drivers/tty/serial/clps711x.c b/drivers/tty/serial/clps711x.c
index d0f719fafc84..3fd2526d121e 100644
--- a/drivers/tty/serial/clps711x.c
+++ b/drivers/tty/serial/clps711x.c
@@ -10,15 +10,6 @@
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#if defined(CONFIG_SERIAL_CLPS711X_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
@@ -26,172 +17,169 @@
#endif
#include <linux/module.h>
-#include <linux/ioport.h>
-#include <linux/init.h>
-#include <linux/console.h>
-#include <linux/sysrq.h>
-#include <linux/spinlock.h>
#include <linux/device.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
+#include <linux/console.h>
#include <linux/serial_core.h>
#include <linux/serial.h>
#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#define UART_NR 2
-
-#define SERIAL_CLPS711X_MAJOR 204
-#define SERIAL_CLPS711X_MINOR 40
-#define SERIAL_CLPS711X_NR UART_NR
-
-/*
- * We use the relevant SYSCON register as a base address for these ports.
- */
-#define UBRLCR(port) ((port)->iobase + UBRLCR1 - SYSCON1)
-#define UARTDR(port) ((port)->iobase + UARTDR1 - SYSCON1)
-#define SYSFLG(port) ((port)->iobase + SYSFLG1 - SYSCON1)
-#define SYSCON(port) ((port)->iobase + SYSCON1 - SYSCON1)
-
-#define TX_IRQ(port) ((port)->irq)
-#define RX_IRQ(port) ((port)->irq + 1)
-#define UART_ANY_ERR (UARTDR_FRMERR | UARTDR_PARERR | UARTDR_OVERR)
-
-#define tx_enabled(port) ((port)->unused[0])
+#define UART_CLPS711X_NAME "uart-clps711x"
+#define UART_CLPS711X_NR 2
+#define UART_CLPS711X_MAJOR 204
+#define UART_CLPS711X_MINOR 40
+
+#define UBRLCR(port) ((port)->line ? UBRLCR2 : UBRLCR1)
+#define UARTDR(port) ((port)->line ? UARTDR2 : UARTDR1)
+#define SYSFLG(port) ((port)->line ? SYSFLG2 : SYSFLG1)
+#define SYSCON(port) ((port)->line ? SYSCON2 : SYSCON1)
+#define TX_IRQ(port) ((port)->line ? IRQ_UTXINT2 : IRQ_UTXINT1)
+#define RX_IRQ(port) ((port)->line ? IRQ_URXINT2 : IRQ_URXINT1)
+
+struct clps711x_port {
+ struct uart_driver uart;
+ struct clk *uart_clk;
+ struct uart_port port[UART_CLPS711X_NR];
+ int tx_enabled[UART_CLPS711X_NR];
+#ifdef CONFIG_SERIAL_CLPS711X_CONSOLE
+ struct console console;
+#endif
+};
-static void clps711xuart_stop_tx(struct uart_port *port)
+static void uart_clps711x_stop_tx(struct uart_port *port)
{
- if (tx_enabled(port)) {
+ struct clps711x_port *s = dev_get_drvdata(port->dev);
+
+ if (s->tx_enabled[port->line]) {
disable_irq(TX_IRQ(port));
- tx_enabled(port) = 0;
+ s->tx_enabled[port->line] = 0;
}
}
-static void clps711xuart_start_tx(struct uart_port *port)
+static void uart_clps711x_start_tx(struct uart_port *port)
{
- if (!tx_enabled(port)) {
+ struct clps711x_port *s = dev_get_drvdata(port->dev);
+
+ if (!s->tx_enabled[port->line]) {
enable_irq(TX_IRQ(port));
- tx_enabled(port) = 1;
+ s->tx_enabled[port->line] = 1;
}
}
-static void clps711xuart_stop_rx(struct uart_port *port)
+static void uart_clps711x_stop_rx(struct uart_port *port)
{
disable_irq(RX_IRQ(port));
}
-static void clps711xuart_enable_ms(struct uart_port *port)
+static void uart_clps711x_enable_ms(struct uart_port *port)
{
+ /* Do nothing */
}
-static irqreturn_t clps711xuart_int_rx(int irq, void *dev_id)
+static irqreturn_t uart_clps711x_int_rx(int irq, void *dev_id)
{
struct uart_port *port = dev_id;
- struct tty_struct *tty = port->state->port.tty;
+ struct tty_struct *tty = tty_port_tty_get(&port->state->port);
unsigned int status, ch, flg;
- status = clps_readl(SYSFLG(port));
- while (!(status & SYSFLG_URXFE)) {
- ch = clps_readl(UARTDR(port));
+ if (!tty)
+ return IRQ_HANDLED;
- port->icount.rx++;
+ for (;;) {
+ status = clps_readl(SYSFLG(port));
+ if (status & SYSFLG_URXFE)
+ break;
+
+ ch = clps_readw(UARTDR(port));
+ status = ch & (UARTDR_FRMERR | UARTDR_PARERR | UARTDR_OVERR);
+ ch &= 0xff;
+ port->icount.rx++;
flg = TTY_NORMAL;
- /*
- * Note that the error handling code is
- * out of the main execution path
- */
- if (unlikely(ch & UART_ANY_ERR)) {
- if (ch & UARTDR_PARERR)
+ if (unlikely(status)) {
+ if (status & UARTDR_PARERR)
port->icount.parity++;
- else if (ch & UARTDR_FRMERR)
+ else if (status & UARTDR_FRMERR)
port->icount.frame++;
- if (ch & UARTDR_OVERR)
+ else if (status & UARTDR_OVERR)
port->icount.overrun++;
- ch &= port->read_status_mask;
+ status &= port->read_status_mask;
- if (ch & UARTDR_PARERR)
+ if (status & UARTDR_PARERR)
flg = TTY_PARITY;
- else if (ch & UARTDR_FRMERR)
+ else if (status & UARTDR_FRMERR)
flg = TTY_FRAME;
-
-#ifdef SUPPORT_SYSRQ
- port->sysrq = 0;
-#endif
+ else if (status & UARTDR_OVERR)
+ flg = TTY_OVERRUN;
}
if (uart_handle_sysrq_char(port, ch))
- goto ignore_char;
+ continue;
- /*
- * CHECK: does overrun affect the current character?
- * ASSUMPTION: it does not.
- */
- uart_insert_char(port, ch, UARTDR_OVERR, ch, flg);
+ if (status & port->ignore_status_mask)
+ continue;
- ignore_char:
- status = clps_readl(SYSFLG(port));
+ uart_insert_char(port, status, UARTDR_OVERR, ch, flg);
}
+
tty_flip_buffer_push(tty);
+
+ tty_kref_put(tty);
+
return IRQ_HANDLED;
}
-static irqreturn_t clps711xuart_int_tx(int irq, void *dev_id)
+static irqreturn_t uart_clps711x_int_tx(int irq, void *dev_id)
{
struct uart_port *port = dev_id;
+ struct clps711x_port *s = dev_get_drvdata(port->dev);
struct circ_buf *xmit = &port->state->xmit;
- int count;
if (port->x_char) {
- clps_writel(port->x_char, UARTDR(port));
+ clps_writew(port->x_char, UARTDR(port));
port->icount.tx++;
port->x_char = 0;
return IRQ_HANDLED;
}
- if (uart_circ_empty(xmit) || uart_tx_stopped(port))
- goto disable_tx_irq;
+ if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
+ disable_irq_nosync(TX_IRQ(port));
+ s->tx_enabled[port->line] = 0;
+ return IRQ_HANDLED;
+ }
- count = port->fifosize >> 1;
- do {
- clps_writel(xmit->buf[xmit->tail], UARTDR(port));
+ while (!uart_circ_empty(xmit)) {
+ clps_writew(xmit->buf[xmit->tail], UARTDR(port));
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
port->icount.tx++;
- if (uart_circ_empty(xmit))
+ if (clps_readl(SYSFLG(port) & SYSFLG_UTXFF))
break;
- } while (--count > 0);
+ }
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
uart_write_wakeup(port);
- if (uart_circ_empty(xmit)) {
- disable_tx_irq:
- disable_irq_nosync(TX_IRQ(port));
- tx_enabled(port) = 0;
- }
-
return IRQ_HANDLED;
}
-static unsigned int clps711xuart_tx_empty(struct uart_port *port)
+static unsigned int uart_clps711x_tx_empty(struct uart_port *port)
{
- unsigned int status = clps_readl(SYSFLG(port));
- return status & SYSFLG_UBUSY ? 0 : TIOCSER_TEMT;
+ return (clps_readl(SYSFLG(port) & SYSFLG_UBUSY)) ? 0 : TIOCSER_TEMT;
}
-static unsigned int clps711xuart_get_mctrl(struct uart_port *port)
+static unsigned int uart_clps711x_get_mctrl(struct uart_port *port)
{
- unsigned int port_addr;
- unsigned int result = 0;
- unsigned int status;
+ unsigned int status, result = 0;
- port_addr = SYSFLG(port);
- if (port_addr == SYSFLG1) {
+ if (port->line == 0) {
status = clps_readl(SYSFLG1);
if (status & SYSFLG1_DCD)
result |= TIOCM_CAR;
@@ -199,104 +187,86 @@ static unsigned int clps711xuart_get_mctrl(struct uart_port *port)
result |= TIOCM_DSR;
if (status & SYSFLG1_CTS)
result |= TIOCM_CTS;
- }
+ } else
+ result = TIOCM_DSR | TIOCM_CTS | TIOCM_CAR;
return result;
}
-static void
-clps711xuart_set_mctrl_null(struct uart_port *port, unsigned int mctrl)
+static void uart_clps711x_set_mctrl(struct uart_port *port, unsigned int mctrl)
{
+ /* Do nothing */
}
-static void clps711xuart_break_ctl(struct uart_port *port, int break_state)
+static void uart_clps711x_break_ctl(struct uart_port *port, int break_state)
{
unsigned long flags;
unsigned int ubrlcr;
spin_lock_irqsave(&port->lock, flags);
+
ubrlcr = clps_readl(UBRLCR(port));
- if (break_state == -1)
+ if (break_state)
ubrlcr |= UBRLCR_BREAK;
else
ubrlcr &= ~UBRLCR_BREAK;
clps_writel(ubrlcr, UBRLCR(port));
+
spin_unlock_irqrestore(&port->lock, flags);
}
-static int clps711xuart_startup(struct uart_port *port)
+static int uart_clps711x_startup(struct uart_port *port)
{
- unsigned int syscon;
- int retval;
-
- tx_enabled(port) = 1;
-
- /*
- * Allocate the IRQs
- */
- retval = request_irq(TX_IRQ(port), clps711xuart_int_tx, 0,
- "clps711xuart_tx", port);
- if (retval)
- return retval;
-
- retval = request_irq(RX_IRQ(port), clps711xuart_int_rx, 0,
- "clps711xuart_rx", port);
- if (retval) {
- free_irq(TX_IRQ(port), port);
- return retval;
+ struct clps711x_port *s = dev_get_drvdata(port->dev);
+ int ret;
+
+ s->tx_enabled[port->line] = 1;
+ /* Allocate the IRQs */
+ ret = devm_request_irq(port->dev, TX_IRQ(port), uart_clps711x_int_tx,
+ 0, UART_CLPS711X_NAME " TX", port);
+ if (ret)
+ return ret;
+
+ ret = devm_request_irq(port->dev, RX_IRQ(port), uart_clps711x_int_rx,
+ 0, UART_CLPS711X_NAME " RX", port);
+ if (ret) {
+ devm_free_irq(port->dev, TX_IRQ(port), port);
+ return ret;
}
- /*
- * enable the port
- */
- syscon = clps_readl(SYSCON(port));
- syscon |= SYSCON_UARTEN;
- clps_writel(syscon, SYSCON(port));
+ /* Disable break */
+ clps_writel(clps_readl(UBRLCR(port)) & ~UBRLCR_BREAK, UBRLCR(port));
+
+ /* Enable the port */
+ clps_writel(clps_readl(SYSCON(port)) | SYSCON_UARTEN, SYSCON(port));
return 0;
}
-static void clps711xuart_shutdown(struct uart_port *port)
+static void uart_clps711x_shutdown(struct uart_port *port)
{
- unsigned int ubrlcr, syscon;
+ /* Free the interrupts */
+ devm_free_irq(port->dev, TX_IRQ(port), port);
+ devm_free_irq(port->dev, RX_IRQ(port), port);
- /*
- * Free the interrupt
- */
- free_irq(TX_IRQ(port), port); /* TX interrupt */
- free_irq(RX_IRQ(port), port); /* RX interrupt */
-
- /*
- * disable the port
- */
- syscon = clps_readl(SYSCON(port));
- syscon &= ~SYSCON_UARTEN;
- clps_writel(syscon, SYSCON(port));
-
- /*
- * disable break condition and fifos
- */
- ubrlcr = clps_readl(UBRLCR(port));
- ubrlcr &= ~(UBRLCR_FIFOEN | UBRLCR_BREAK);
- clps_writel(ubrlcr, UBRLCR(port));
+ /* Disable the port */
+ clps_writel(clps_readl(SYSCON(port)) & ~SYSCON_UARTEN, SYSCON(port));
}
-static void
-clps711xuart_set_termios(struct uart_port *port, struct ktermios *termios,
- struct ktermios *old)
+static void uart_clps711x_set_termios(struct uart_port *port,
+ struct ktermios *termios,
+ struct ktermios *old)
{
unsigned int ubrlcr, baud, quot;
unsigned long flags;
- /*
- * We don't implement CREAD.
- */
- termios->c_cflag |= CREAD;
+ /* Mask termios capabilities we don't support */
+ termios->c_cflag &= ~CMSPAR;
+ termios->c_iflag &= ~(BRKINT | IGNBRK);
- /*
- * Ask the core to calculate the divisor for us.
- */
- baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
+ /* Ask the core to calculate the divisor for us */
+ baud = uart_get_baud_rate(port, termios, old, port->uartclk / 4096,
+ port->uartclk / 16);
quot = uart_get_divisor(port, baud);
switch (termios->c_cflag & CSIZE) {
@@ -309,160 +279,117 @@ clps711xuart_set_termios(struct uart_port *port, struct ktermios *termios,
case CS7:
ubrlcr = UBRLCR_WRDLEN7;
break;
- default: // CS8
+ case CS8:
+ default:
ubrlcr = UBRLCR_WRDLEN8;
break;
}
+
if (termios->c_cflag & CSTOPB)
ubrlcr |= UBRLCR_XSTOP;
+
if (termios->c_cflag & PARENB) {
ubrlcr |= UBRLCR_PRTEN;
if (!(termios->c_cflag & PARODD))
ubrlcr |= UBRLCR_EVENPRT;
}
- if (port->fifosize > 1)
- ubrlcr |= UBRLCR_FIFOEN;
- spin_lock_irqsave(&port->lock, flags);
+ /* Enable FIFO */
+ ubrlcr |= UBRLCR_FIFOEN;
- /*
- * Update the per-port timeout.
- */
- uart_update_timeout(port, termios->c_cflag, baud);
+ spin_lock_irqsave(&port->lock, flags);
+ /* Set read status mask */
port->read_status_mask = UARTDR_OVERR;
if (termios->c_iflag & INPCK)
port->read_status_mask |= UARTDR_PARERR | UARTDR_FRMERR;
- /*
- * Characters to ignore
- */
+ /* Set status ignore mask */
port->ignore_status_mask = 0;
- if (termios->c_iflag & IGNPAR)
- port->ignore_status_mask |= UARTDR_FRMERR | UARTDR_PARERR;
- if (termios->c_iflag & IGNBRK) {
- /*
- * If we're ignoring parity and break indicators,
- * ignore overruns to (for real raw support).
- */
- if (termios->c_iflag & IGNPAR)
- port->ignore_status_mask |= UARTDR_OVERR;
- }
+ if (!(termios->c_cflag & CREAD))
+ port->ignore_status_mask |= UARTDR_OVERR | UARTDR_PARERR |
+ UARTDR_FRMERR;
- quot -= 1;
+ uart_update_timeout(port, termios->c_cflag, baud);
- clps_writel(ubrlcr | quot, UBRLCR(port));
+ clps_writel(ubrlcr | (quot - 1), UBRLCR(port));
spin_unlock_irqrestore(&port->lock, flags);
}
-static const char *clps711xuart_type(struct uart_port *port)
+static const char *uart_clps711x_type(struct uart_port *port)
{
- return port->type == PORT_CLPS711X ? "CLPS711x" : NULL;
+ return (port->type == PORT_CLPS711X) ? "CLPS711X" : NULL;
}
-/*
- * Configure/autoconfigure the port.
- */
-static void clps711xuart_config_port(struct uart_port *port, int flags)
+static void uart_clps711x_config_port(struct uart_port *port, int flags)
{
if (flags & UART_CONFIG_TYPE)
port->type = PORT_CLPS711X;
}
-static void clps711xuart_release_port(struct uart_port *port)
+static void uart_clps711x_release_port(struct uart_port *port)
{
+ /* Do nothing */
}
-static int clps711xuart_request_port(struct uart_port *port)
+static int uart_clps711x_request_port(struct uart_port *port)
{
+ /* Do nothing */
return 0;
}
-static struct uart_ops clps711x_pops = {
- .tx_empty = clps711xuart_tx_empty,
- .set_mctrl = clps711xuart_set_mctrl_null,
- .get_mctrl = clps711xuart_get_mctrl,
- .stop_tx = clps711xuart_stop_tx,
- .start_tx = clps711xuart_start_tx,
- .stop_rx = clps711xuart_stop_rx,
- .enable_ms = clps711xuart_enable_ms,
- .break_ctl = clps711xuart_break_ctl,
- .startup = clps711xuart_startup,
- .shutdown = clps711xuart_shutdown,
- .set_termios = clps711xuart_set_termios,
- .type = clps711xuart_type,
- .config_port = clps711xuart_config_port,
- .release_port = clps711xuart_release_port,
- .request_port = clps711xuart_request_port,
-};
-
-static struct uart_port clps711x_ports[UART_NR] = {
- {
- .iobase = SYSCON1,
- .irq = IRQ_UTXINT1, /* IRQ_URXINT1, IRQ_UMSINT */
- .uartclk = 3686400,
- .fifosize = 16,
- .ops = &clps711x_pops,
- .line = 0,
- .flags = UPF_BOOT_AUTOCONF,
- },
- {
- .iobase = SYSCON2,
- .irq = IRQ_UTXINT2, /* IRQ_URXINT2 */
- .uartclk = 3686400,
- .fifosize = 16,
- .ops = &clps711x_pops,
- .line = 1,
- .flags = UPF_BOOT_AUTOCONF,
- }
+static const struct uart_ops uart_clps711x_ops = {
+ .tx_empty = uart_clps711x_tx_empty,
+ .set_mctrl = uart_clps711x_set_mctrl,
+ .get_mctrl = uart_clps711x_get_mctrl,
+ .stop_tx = uart_clps711x_stop_tx,
+ .start_tx = uart_clps711x_start_tx,
+ .stop_rx = uart_clps711x_stop_rx,
+ .enable_ms = uart_clps711x_enable_ms,
+ .break_ctl = uart_clps711x_break_ctl,
+ .startup = uart_clps711x_startup,
+ .shutdown = uart_clps711x_shutdown,
+ .set_termios = uart_clps711x_set_termios,
+ .type = uart_clps711x_type,
+ .config_port = uart_clps711x_config_port,
+ .release_port = uart_clps711x_release_port,
+ .request_port = uart_clps711x_request_port,
};
#ifdef CONFIG_SERIAL_CLPS711X_CONSOLE
-static void clps711xuart_console_putchar(struct uart_port *port, int ch)
+static void uart_clps711x_console_putchar(struct uart_port *port, int ch)
{
while (clps_readl(SYSFLG(port)) & SYSFLG_UTXFF)
barrier();
- clps_writel(ch, UARTDR(port));
+
+ clps_writew(ch, UARTDR(port));
}
-/*
- * Print a string to the serial port trying not to disturb
- * any possible real use of the port...
- *
- * The console_lock must be held when we get here.
- *
- * Note that this is called with interrupts already disabled
- */
-static void
-clps711xuart_console_write(struct console *co, const char *s,
- unsigned int count)
+static void uart_clps711x_console_write(struct console *co, const char *c,
+ unsigned n)
{
- struct uart_port *port = clps711x_ports + co->index;
- unsigned int status, syscon;
+ struct clps711x_port *s = (struct clps711x_port *)co->data;
+ struct uart_port *port = &s->port[co->index];
+ u32 syscon;
- /*
- * Ensure that the port is enabled.
- */
+ /* Ensure that the port is enabled */
syscon = clps_readl(SYSCON(port));
clps_writel(syscon | SYSCON_UARTEN, SYSCON(port));
- uart_console_write(port, s, count, clps711xuart_console_putchar);
+ uart_console_write(port, c, n, uart_clps711x_console_putchar);
- /*
- * Finally, wait for transmitter to become empty
- * and restore the uart state.
- */
- do {
- status = clps_readl(SYSFLG(port));
- } while (status & SYSFLG_UBUSY);
+ /* Wait for transmitter to become empty */
+ while (clps_readl(SYSFLG(port)) & SYSFLG_UBUSY)
+ barrier();
+ /* Restore the uart state */
clps_writel(syscon, SYSCON(port));
}
-static void __init
-clps711xuart_console_get_options(struct uart_port *port, int *baud,
- int *parity, int *bits)
+static void uart_clps711x_console_get_options(struct uart_port *port,
+ int *baud, int *parity,
+ int *bits)
{
if (clps_readl(SYSCON(port)) & SYSCON_UARTEN) {
unsigned int ubrlcr, quot;
@@ -487,92 +414,124 @@ clps711xuart_console_get_options(struct uart_port *port, int *baud,
}
}
-static int __init clps711xuart_console_setup(struct console *co, char *options)
+static int uart_clps711x_console_setup(struct console *co, char *options)
{
- struct uart_port *port;
- int baud = 38400;
- int bits = 8;
- int parity = 'n';
- int flow = 'n';
-
- /*
- * Check whether an invalid uart number has been specified, and
- * if so, search for the first available port that does have
- * console support.
- */
- port = uart_get_console(clps711x_ports, UART_NR, co);
+ int baud = 38400, bits = 8, parity = 'n', flow = 'n';
+ struct clps711x_port *s = (struct clps711x_port *)co->data;
+ struct uart_port *port = &s->port[(co->index > 0) ? co->index : 0];
if (options)
uart_parse_options(options, &baud, &parity, &bits, &flow);
else
- clps711xuart_console_get_options(port, &baud, &parity, &bits);
+ uart_clps711x_console_get_options(port, &baud, &parity, &bits);
return uart_set_options(port, co, baud, parity, bits, flow);
}
+#endif
-static struct uart_driver clps711x_reg;
-static struct console clps711x_console = {
- .name = "ttyCL",
- .write = clps711xuart_console_write,
- .device = uart_console_device,
- .setup = clps711xuart_console_setup,
- .flags = CON_PRINTBUFFER,
- .index = -1,
- .data = &clps711x_reg,
-};
-
-static int __init clps711xuart_console_init(void)
+static int uart_clps711x_probe(struct platform_device *pdev)
{
- register_console(&clps711x_console);
- return 0;
-}
-console_initcall(clps711xuart_console_init);
+ struct clps711x_port *s;
+ int ret, i;
+
+ s = devm_kzalloc(&pdev->dev, sizeof(struct clps711x_port), GFP_KERNEL);
+ if (!s) {
+ dev_err(&pdev->dev, "Error allocating port structure\n");
+ return -ENOMEM;
+ }
+ platform_set_drvdata(pdev, s);
-#define CLPS711X_CONSOLE &clps711x_console
-#else
-#define CLPS711X_CONSOLE NULL
+ s->uart_clk = devm_clk_get(&pdev->dev, "uart");
+ if (IS_ERR(s->uart_clk)) {
+ dev_err(&pdev->dev, "Can't get UART clocks\n");
+ ret = PTR_ERR(s->uart_clk);
+ goto err_out;
+ }
+
+ s->uart.owner = THIS_MODULE;
+ s->uart.dev_name = "ttyCL";
+ s->uart.major = UART_CLPS711X_MAJOR;
+ s->uart.minor = UART_CLPS711X_MINOR;
+ s->uart.nr = UART_CLPS711X_NR;
+#ifdef CONFIG_SERIAL_CLPS711X_CONSOLE
+ s->uart.cons = &s->console;
+ s->uart.cons->device = uart_console_device;
+ s->uart.cons->write = uart_clps711x_console_write;
+ s->uart.cons->setup = uart_clps711x_console_setup;
+ s->uart.cons->flags = CON_PRINTBUFFER;
+ s->uart.cons->index = -1;
+ s->uart.cons->data = s;
+ strcpy(s->uart.cons->name, "ttyCL");
#endif
+ ret = uart_register_driver(&s->uart);
+ if (ret) {
+ dev_err(&pdev->dev, "Registering UART driver failed\n");
+ devm_clk_put(&pdev->dev, s->uart_clk);
+ goto err_out;
+ }
-static struct uart_driver clps711x_reg = {
- .driver_name = "ttyCL",
- .dev_name = "ttyCL",
- .major = SERIAL_CLPS711X_MAJOR,
- .minor = SERIAL_CLPS711X_MINOR,
- .nr = UART_NR,
+ for (i = 0; i < UART_CLPS711X_NR; i++) {
+ s->port[i].line = i;
+ s->port[i].dev = &pdev->dev;
+ s->port[i].irq = TX_IRQ(&s->port[i]);
+ s->port[i].iobase = SYSCON(&s->port[i]);
+ s->port[i].type = PORT_CLPS711X;
+ s->port[i].fifosize = 16;
+ s->port[i].flags = UPF_SKIP_TEST | UPF_FIXED_TYPE;
+ s->port[i].uartclk = clk_get_rate(s->uart_clk);
+ s->port[i].ops = &uart_clps711x_ops;
+ WARN_ON(uart_add_one_port(&s->uart, &s->port[i]));
+ }
- .cons = CLPS711X_CONSOLE,
-};
+ return 0;
-static int __init clps711xuart_init(void)
-{
- int ret, i;
+err_out:
+ platform_set_drvdata(pdev, NULL);
- printk(KERN_INFO "Serial: CLPS711x driver\n");
+ return ret;
+}
- ret = uart_register_driver(&clps711x_reg);
- if (ret)
- return ret;
+static int uart_clps711x_remove(struct platform_device *pdev)
+{
+ struct clps711x_port *s = platform_get_drvdata(pdev);
+ int i;
- for (i = 0; i < UART_NR; i++)
- uart_add_one_port(&clps711x_reg, &clps711x_ports[i]);
+ for (i = 0; i < UART_CLPS711X_NR; i++)
+ uart_remove_one_port(&s->uart, &s->port[i]);
+
+ devm_clk_put(&pdev->dev, s->uart_clk);
+ uart_unregister_driver(&s->uart);
+ platform_set_drvdata(pdev, NULL);
return 0;
}
-static void __exit clps711xuart_exit(void)
-{
- int i;
+static struct platform_driver clps711x_uart_driver = {
+ .driver = {
+ .name = UART_CLPS711X_NAME,
+ .owner = THIS_MODULE,
+ },
+ .probe = uart_clps711x_probe,
+ .remove = uart_clps711x_remove,
+};
+module_platform_driver(clps711x_uart_driver);
- for (i = 0; i < UART_NR; i++)
- uart_remove_one_port(&clps711x_reg, &clps711x_ports[i]);
+static struct platform_device clps711x_uart_device = {
+ .name = UART_CLPS711X_NAME,
+};
- uart_unregister_driver(&clps711x_reg);
+static int __init uart_clps711x_init(void)
+{
+ return platform_device_register(&clps711x_uart_device);
}
+module_init(uart_clps711x_init);
-module_init(clps711xuart_init);
-module_exit(clps711xuart_exit);
+static void __exit uart_clps711x_exit(void)
+{
+ platform_device_unregister(&clps711x_uart_device);
+}
+module_exit(uart_clps711x_exit);
MODULE_AUTHOR("Deep Blue Solutions Ltd");
-MODULE_DESCRIPTION("CLPS-711x generic serial driver");
+MODULE_DESCRIPTION("CLPS711X serial driver");
MODULE_LICENSE("GPL");
-MODULE_ALIAS_CHARDEV(SERIAL_CLPS711X_MAJOR, SERIAL_CLPS711X_MINOR);