diff options
Diffstat (limited to 'drivers/staging')
-rw-r--r-- | drivers/staging/olpc_dcon/olpc_dcon.c | 51 | ||||
-rw-r--r-- | drivers/staging/olpc_dcon/olpc_dcon.h | 32 | ||||
-rw-r--r-- | drivers/staging/olpc_dcon/olpc_dcon_xo_1.c | 10 | ||||
-rw-r--r-- | drivers/staging/olpc_dcon/olpc_dcon_xo_1_5.c | 9 |
4 files changed, 51 insertions, 51 deletions
diff --git a/drivers/staging/olpc_dcon/olpc_dcon.c b/drivers/staging/olpc_dcon/olpc_dcon.c index 96b6fd26791b..cdd8718a7f99 100644 --- a/drivers/staging/olpc_dcon/olpc_dcon.c +++ b/drivers/staging/olpc_dcon/olpc_dcon.c @@ -23,7 +23,6 @@ #include <linux/delay.h> #include <linux/backlight.h> #include <linux/device.h> -#include <linux/notifier.h> #include <linux/uaccess.h> #include <linux/ctype.h> #include <linux/reboot.h> @@ -46,24 +45,6 @@ module_param(useaa, int, 0444); static struct dcon_platform_data *pdata; -struct dcon_priv { - struct i2c_client *client; - struct fb_info *fbinfo; - - struct work_struct switch_source; - struct notifier_block reboot_nb; - struct notifier_block fbevent_nb; - - /* Shadow register for the DCON_REG_MODE register */ - u8 disp_mode; - - /* Current output type; true == mono, false == color */ - bool mono; - bool asleep; - /* This get set while controlling fb blank state from the driver */ - bool ignore_fb_events; -}; - /* I2C structures */ /* Platform devices */ @@ -72,12 +53,6 @@ static struct platform_device *dcon_device; /* Backlight device */ static struct backlight_device *dcon_bl_dev; -/* Current source, initialized at probe time */ -int dcon_source; - -/* Desired source */ -int dcon_pending; - /* Variables used during switches */ static int dcon_switched; static struct timespec dcon_irq_time; @@ -119,7 +94,7 @@ static int dcon_hw_init(struct dcon_priv *dcon, int is_init) if (is_init) { printk(KERN_INFO "olpc-dcon: Discovered DCON version %x\n", ver & 0xFF); - rc = pdata->init(); + rc = pdata->init(dcon); if (rc != 0) { printk(KERN_ERR "olpc-dcon: Unable to init.\n"); goto err; @@ -366,9 +341,9 @@ static void dcon_source_switch(struct work_struct *work) struct dcon_priv *dcon = container_of(work, struct dcon_priv, switch_source); DECLARE_WAITQUEUE(wait, current); - int source = dcon_pending; + int source = dcon->pending_src; - if (dcon_source == source) + if (dcon->curr_src == source) return; dcon_load_holdoff(); @@ -406,7 +381,7 @@ static void dcon_source_switch(struct work_struct *work) */ if (!dcon_blank_fb(dcon, false)) { printk(KERN_ERR "olpc-dcon: Failed to enter CPU mode\n"); - dcon_pending = DCON_SOURCE_DCON; + dcon->pending_src = DCON_SOURCE_DCON; return; } @@ -468,17 +443,17 @@ static void dcon_source_switch(struct work_struct *work) BUG(); } - dcon_source = source; + dcon->curr_src = source; } static void dcon_set_source(struct dcon_priv *dcon, int arg) { - if (dcon_pending == arg) + if (dcon->pending_src == arg) return; - dcon_pending = arg; + dcon->pending_src = arg; - if ((dcon_source != arg) && !work_pending(&dcon->switch_source)) + if ((dcon->curr_src != arg) && !work_pending(&dcon->switch_source)) schedule_work(&dcon->switch_source); } @@ -524,7 +499,8 @@ static ssize_t dcon_sleep_show(struct device *dev, static ssize_t dcon_freeze_show(struct device *dev, struct device_attribute *attr, char *buf) { - return sprintf(buf, "%d\n", dcon_source == DCON_SOURCE_DCON ? 1 : 0); + struct dcon_priv *dcon = dev_get_drvdata(dev); + return sprintf(buf, "%d\n", dcon->curr_src == DCON_SOURCE_DCON ? 1 : 0); } static ssize_t dcon_mono_show(struct device *dev, @@ -765,7 +741,7 @@ static int dcon_probe(struct i2c_client *client, const struct i2c_device_id *id) platform_device_unregister(dcon_device); dcon_device = NULL; eirq: - free_irq(DCON_IRQ, &dcon_driver); + free_irq(DCON_IRQ, dcon); einit: i2c_set_clientdata(client, NULL); kfree(dcon); @@ -782,7 +758,7 @@ static int dcon_remove(struct i2c_client *client) unregister_reboot_notifier(&dcon->reboot_nb); atomic_notifier_chain_unregister(&panic_notifier_list, &dcon_panic_nb); - free_irq(DCON_IRQ, &dcon_driver); + free_irq(DCON_IRQ, dcon); if (dcon_bl_dev != NULL) backlight_device_unregister(dcon_bl_dev); @@ -826,6 +802,7 @@ static int dcon_resume(struct i2c_client *client) irqreturn_t dcon_interrupt(int irq, void *id) { + struct dcon_priv *dcon = id; int status = pdata->read_status(); if (status == -1) @@ -851,7 +828,7 @@ irqreturn_t dcon_interrupt(int irq, void *id) * of the DCON happened long before this point. * see http://dev.laptop.org/ticket/9869 */ - if (dcon_source != dcon_pending && !dcon_switched) { + if (dcon->curr_src != dcon->pending_src && !dcon_switched) { dcon_switched = 1; getnstimeofday(&dcon_irq_time); wake_up(&dcon_wait_queue); diff --git a/drivers/staging/olpc_dcon/olpc_dcon.h b/drivers/staging/olpc_dcon/olpc_dcon.h index 03ac42c5e3ca..2c06e1915c3f 100644 --- a/drivers/staging/olpc_dcon/olpc_dcon.h +++ b/drivers/staging/olpc_dcon/olpc_dcon.h @@ -1,6 +1,9 @@ #ifndef OLPC_DCON_H_ #define OLPC_DCON_H_ +#include <linux/notifier.h> +#include <linux/workqueue.h> + /* DCON registers */ #define DCON_REG_ID 0 @@ -44,8 +47,32 @@ /* Interrupt */ #define DCON_IRQ 6 +struct dcon_priv { + struct i2c_client *client; + struct fb_info *fbinfo; + + struct work_struct switch_source; + struct notifier_block reboot_nb; + struct notifier_block fbevent_nb; + + /* Shadow register for the DCON_REG_MODE register */ + u8 disp_mode; + + /* Current source, initialized at probe time */ + int curr_src; + + /* Desired source */ + int pending_src; + + /* Current output type; true == mono, false == color */ + bool mono; + bool asleep; + /* This get set while controlling fb blank state from the driver */ + bool ignore_fb_events; +}; + struct dcon_platform_data { - int (*init)(void); + int (*init)(struct dcon_priv *); void (*bus_stabilize_wiggle)(void); void (*set_dconload)(int); u8 (*read_status)(void); @@ -53,10 +80,7 @@ struct dcon_platform_data { #include <linux/interrupt.h> -extern int dcon_source; -extern int dcon_pending; extern irqreturn_t dcon_interrupt(int irq, void *id); -extern struct i2c_driver dcon_driver; #ifdef CONFIG_FB_OLPC_DCON_1 extern struct dcon_platform_data dcon_pdata_xo_1; diff --git a/drivers/staging/olpc_dcon/olpc_dcon_xo_1.c b/drivers/staging/olpc_dcon/olpc_dcon_xo_1.c index be52b6c9c50e..b154be7a2fe6 100644 --- a/drivers/staging/olpc_dcon/olpc_dcon_xo_1.c +++ b/drivers/staging/olpc_dcon/olpc_dcon_xo_1.c @@ -16,7 +16,7 @@ #include "olpc_dcon.h" -static int dcon_init_xo_1(void) +static int dcon_init_xo_1(struct dcon_priv *dcon) { unsigned char lob; @@ -54,10 +54,10 @@ static int dcon_init_xo_1(void) * then a value is set. So, future readings of the pin can use * READ_BACK, but the first one cannot. Awesome, huh? */ - dcon_source = cs5535_gpio_isset(OLPC_GPIO_DCON_LOAD, GPIO_OUTPUT_VAL) + dcon->curr_src = cs5535_gpio_isset(OLPC_GPIO_DCON_LOAD, GPIO_OUTPUT_VAL) ? DCON_SOURCE_CPU : DCON_SOURCE_DCON; - dcon_pending = dcon_source; + dcon->pending_src = dcon->curr_src; /* Set the directions for the GPIO pins */ gpio_direction_input(OLPC_GPIO_DCON_STAT0); @@ -65,7 +65,7 @@ static int dcon_init_xo_1(void) gpio_direction_input(OLPC_GPIO_DCON_IRQ); gpio_direction_input(OLPC_GPIO_DCON_BLANK); gpio_direction_output(OLPC_GPIO_DCON_LOAD, - dcon_source == DCON_SOURCE_CPU); + dcon->curr_src == DCON_SOURCE_CPU); /* Set up the interrupt mappings */ @@ -81,7 +81,7 @@ static int dcon_init_xo_1(void) outb(lob, 0x4d0); /* Register the interupt handler */ - if (request_irq(DCON_IRQ, &dcon_interrupt, 0, "DCON", &dcon_driver)) { + if (request_irq(DCON_IRQ, &dcon_interrupt, 0, "DCON", dcon)) { printk(KERN_ERR "olpc-dcon: failed to request DCON's irq\n"); goto err_req_irq; } diff --git a/drivers/staging/olpc_dcon/olpc_dcon_xo_1_5.c b/drivers/staging/olpc_dcon/olpc_dcon_xo_1_5.c index d4c2d7482c32..e213b63f8116 100644 --- a/drivers/staging/olpc_dcon/olpc_dcon_xo_1_5.c +++ b/drivers/staging/olpc_dcon/olpc_dcon_xo_1_5.c @@ -57,7 +57,7 @@ static int dcon_was_irq(void) return 0; } -static int dcon_init_xo_1_5(void) +static int dcon_init_xo_1_5(struct dcon_priv *dcon) { unsigned int irq; u_int8_t tmp; @@ -96,20 +96,19 @@ static int dcon_init_xo_1_5(void) /* Determine the current state of DCONLOAD, likely set by firmware */ /* GPIO1 */ - dcon_source = (inl(VX855_GENL_PURPOSE_OUTPUT) & 0x1000) ? + dcon->curr_src = (inl(VX855_GENL_PURPOSE_OUTPUT) & 0x1000) ? DCON_SOURCE_CPU : DCON_SOURCE_DCON; - dcon_pending = dcon_source; + dcon->pending_src = dcon->curr_src; pci_dev_put(pdev); /* we're sharing the IRQ with ACPI */ irq = acpi_gbl_FADT.sci_interrupt; - if (request_irq(irq, &dcon_interrupt, IRQF_SHARED, "DCON", &dcon_driver)) { + if (request_irq(irq, &dcon_interrupt, IRQF_SHARED, "DCON", dcon)) { printk(KERN_ERR PREFIX "DCON (IRQ%d) allocation failed\n", irq); return 1; } - return 0; } |