diff options
Diffstat (limited to 'drivers/phy')
29 files changed, 3048 insertions, 579 deletions
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index 0263db2ac874..b3ed94b98d9b 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -69,5 +69,6 @@ source "drivers/phy/socionext/Kconfig" source "drivers/phy/st/Kconfig" source "drivers/phy/tegra/Kconfig" source "drivers/phy/ti/Kconfig" +source "drivers/phy/intel/Kconfig" endmenu diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile index c96a1afc95bd..310c149a9df5 100644 --- a/drivers/phy/Makefile +++ b/drivers/phy/Makefile @@ -18,6 +18,7 @@ obj-y += broadcom/ \ cadence/ \ freescale/ \ hisilicon/ \ + intel/ \ lantiq/ \ marvell/ \ motorola/ \ diff --git a/drivers/phy/allwinner/Kconfig b/drivers/phy/allwinner/Kconfig index 3dab79e9d52b..e760d89d3976 100644 --- a/drivers/phy/allwinner/Kconfig +++ b/drivers/phy/allwinner/Kconfig @@ -48,7 +48,8 @@ config PHY_SUN9I_USB config PHY_SUN50I_USB3 tristate "Allwinner H6 SoC USB3 PHY driver" - depends on ARCH_SUNXI && HAS_IOMEM && OF + depends on ARCH_SUNXI || COMPILE_TEST + depends on HAS_IOMEM && OF depends on RESET_CONTROLLER select GENERIC_PHY help diff --git a/drivers/phy/broadcom/Kconfig b/drivers/phy/broadcom/Kconfig index d3d983c128ea..b29f11c19155 100644 --- a/drivers/phy/broadcom/Kconfig +++ b/drivers/phy/broadcom/Kconfig @@ -50,7 +50,7 @@ config PHY_BCM_NS_USB3 config PHY_NS2_PCIE tristate "Broadcom Northstar2 PCIe PHY driver" - depends on OF && MDIO_BUS_MUX_BCM_IPROC + depends on (OF && MDIO_BUS_MUX_BCM_IPROC) || (COMPILE_TEST && MDIO_BUS) select GENERIC_PHY default ARCH_BCM_IPROC help @@ -83,7 +83,7 @@ config PHY_BRCM_SATA config PHY_BRCM_USB tristate "Broadcom STB USB PHY driver" - depends on ARCH_BRCMSTB + depends on ARCH_BRCMSTB || COMPILE_TEST depends on OF select GENERIC_PHY select SOC_BRCMSTB diff --git a/drivers/phy/broadcom/Makefile b/drivers/phy/broadcom/Makefile index f453c7d3ffff..c78de546135c 100644 --- a/drivers/phy/broadcom/Makefile +++ b/drivers/phy/broadcom/Makefile @@ -8,7 +8,7 @@ obj-$(CONFIG_PHY_NS2_USB_DRD) += phy-bcm-ns2-usbdrd.o obj-$(CONFIG_PHY_BRCM_SATA) += phy-brcm-sata.o obj-$(CONFIG_PHY_BRCM_USB) += phy-brcm-usb-dvr.o -phy-brcm-usb-dvr-objs := phy-brcm-usb.o phy-brcm-usb-init.o +phy-brcm-usb-dvr-objs := phy-brcm-usb.o phy-brcm-usb-init.o phy-brcm-usb-init-synopsys.o obj-$(CONFIG_PHY_BCM_SR_PCIE) += phy-bcm-sr-pcie.o obj-$(CONFIG_PHY_BCM_SR_USB) += phy-bcm-sr-usb.o diff --git a/drivers/phy/broadcom/phy-brcm-sata.c b/drivers/phy/broadcom/phy-brcm-sata.c index 50ac75bbb0c9..4710cfcc3037 100644 --- a/drivers/phy/broadcom/phy-brcm-sata.c +++ b/drivers/phy/broadcom/phy-brcm-sata.c @@ -33,6 +33,7 @@ #define SATA_PHY_CTRL_REG_28NM_SPACE_SIZE 0x8 enum brcm_sata_phy_version { + BRCM_SATA_PHY_STB_16NM, BRCM_SATA_PHY_STB_28NM, BRCM_SATA_PHY_STB_40NM, BRCM_SATA_PHY_IPROC_NS2, @@ -104,10 +105,13 @@ enum sata_phy_regs { PLL1_ACTRL5 = 0x85, PLL1_ACTRL6 = 0x86, PLL1_ACTRL7 = 0x87, + PLL1_ACTRL8 = 0x88, TX_REG_BANK = 0x070, TX_ACTRL0 = 0x80, TX_ACTRL0_TXPOL_FLIP = BIT(6), + TX_ACTRL5 = 0x85, + TX_ACTRL5_SSC_EN = BIT(11), AEQRX_REG_BANK_0 = 0xd0, AEQ_CONTROL1 = 0x81, @@ -116,6 +120,7 @@ enum sata_phy_regs { AEQ_FRC_EQ = 0x83, AEQ_FRC_EQ_FORCE = BIT(0), AEQ_FRC_EQ_FORCE_VAL = BIT(1), + AEQ_RFZ_FRC_VAL = BIT(8), AEQRX_REG_BANK_1 = 0xe0, AEQRX_SLCAL0_CTRL0 = 0x82, AEQRX_SLCAL1_CTRL0 = 0x86, @@ -152,7 +157,28 @@ enum sata_phy_regs { TXPMD_TX_FREQ_CTRL_CONTROL3_FMAX_MASK = 0x3ff, RXPMD_REG_BANK = 0x1c0, + RXPMD_RX_CDR_CONTROL1 = 0x81, + RXPMD_RX_PPM_VAL_MASK = 0x1ff, + RXPMD_RXPMD_EN_FRC = BIT(12), + RXPMD_RXPMD_EN_FRC_VAL = BIT(13), + RXPMD_RX_CDR_CDR_PROP_BW = 0x82, + RXPMD_G_CDR_PROP_BW_MASK = 0x7, + RXPMD_G1_CDR_PROP_BW_SHIFT = 0, + RXPMD_G2_CDR_PROP_BW_SHIFT = 3, + RXPMD_G3_CDR_PROB_BW_SHIFT = 6, + RXPMD_RX_CDR_CDR_ACQ_INTEG_BW = 0x83, + RXPMD_G_CDR_ACQ_INT_BW_MASK = 0x7, + RXPMD_G1_CDR_ACQ_INT_BW_SHIFT = 0, + RXPMD_G2_CDR_ACQ_INT_BW_SHIFT = 3, + RXPMD_G3_CDR_ACQ_INT_BW_SHIFT = 6, + RXPMD_RX_CDR_CDR_LOCK_INTEG_BW = 0x84, + RXPMD_G_CDR_LOCK_INT_BW_MASK = 0x7, + RXPMD_G1_CDR_LOCK_INT_BW_SHIFT = 0, + RXPMD_G2_CDR_LOCK_INT_BW_SHIFT = 3, + RXPMD_G3_CDR_LOCK_INT_BW_SHIFT = 6, RXPMD_RX_FREQ_MON_CONTROL1 = 0x87, + RXPMD_MON_CORRECT_EN = BIT(8), + RXPMD_MON_MARGIN_VAL_MASK = 0xff, }; enum sata_phy_ctrl_regs { @@ -166,6 +192,7 @@ static inline void __iomem *brcm_sata_pcb_base(struct brcm_sata_port *port) u32 size = 0; switch (priv->version) { + case BRCM_SATA_PHY_STB_16NM: case BRCM_SATA_PHY_STB_28NM: case BRCM_SATA_PHY_IPROC_NS2: case BRCM_SATA_PHY_DSL_28NM: @@ -287,6 +314,94 @@ static int brcm_stb_sata_init(struct brcm_sata_port *port) return brcm_stb_sata_rxaeq_init(port); } +static int brcm_stb_sata_16nm_ssc_init(struct brcm_sata_port *port) +{ + void __iomem *base = brcm_sata_pcb_base(port); + u32 tmp, value; + + /* Reduce CP tail current to 1/16th of its default value */ + brcm_sata_phy_wr(base, PLL1_REG_BANK, PLL1_ACTRL6, 0, 0x141); + + /* Turn off CP tail current boost */ + brcm_sata_phy_wr(base, PLL1_REG_BANK, PLL1_ACTRL8, 0, 0xc006); + + /* Set a specific AEQ equalizer value */ + tmp = AEQ_FRC_EQ_FORCE_VAL | AEQ_FRC_EQ_FORCE; + brcm_sata_phy_wr(base, AEQRX_REG_BANK_0, AEQ_FRC_EQ, + ~(tmp | AEQ_RFZ_FRC_VAL | + AEQ_FRC_EQ_VAL_MASK << AEQ_FRC_EQ_VAL_SHIFT), + tmp | 32 << AEQ_FRC_EQ_VAL_SHIFT); + + /* Set RX PPM val center frequency */ + if (port->ssc_en) + value = 0x52; + else + value = 0; + brcm_sata_phy_wr(base, RXPMD_REG_BANK, RXPMD_RX_CDR_CONTROL1, + ~RXPMD_RX_PPM_VAL_MASK, value); + + /* Set proportional loop bandwith Gen1/2/3 */ + tmp = RXPMD_G_CDR_PROP_BW_MASK << RXPMD_G1_CDR_PROP_BW_SHIFT | + RXPMD_G_CDR_PROP_BW_MASK << RXPMD_G2_CDR_PROP_BW_SHIFT | + RXPMD_G_CDR_PROP_BW_MASK << RXPMD_G3_CDR_PROB_BW_SHIFT; + if (port->ssc_en) + value = 2 << RXPMD_G1_CDR_PROP_BW_SHIFT | + 2 << RXPMD_G2_CDR_PROP_BW_SHIFT | + 2 << RXPMD_G3_CDR_PROB_BW_SHIFT; + else + value = 1 << RXPMD_G1_CDR_PROP_BW_SHIFT | + 1 << RXPMD_G2_CDR_PROP_BW_SHIFT | + 1 << RXPMD_G3_CDR_PROB_BW_SHIFT; + brcm_sata_phy_wr(base, RXPMD_REG_BANK, RXPMD_RX_CDR_CDR_PROP_BW, ~tmp, + value); + + /* Set CDR integral loop acquisition bandwidth for Gen1/2/3 */ + tmp = RXPMD_G_CDR_ACQ_INT_BW_MASK << RXPMD_G1_CDR_ACQ_INT_BW_SHIFT | + RXPMD_G_CDR_ACQ_INT_BW_MASK << RXPMD_G2_CDR_ACQ_INT_BW_SHIFT | + RXPMD_G_CDR_ACQ_INT_BW_MASK << RXPMD_G3_CDR_ACQ_INT_BW_SHIFT; + if (port->ssc_en) + value = 1 << RXPMD_G1_CDR_ACQ_INT_BW_SHIFT | + 1 << RXPMD_G2_CDR_ACQ_INT_BW_SHIFT | + 1 << RXPMD_G3_CDR_ACQ_INT_BW_SHIFT; + else + value = 0; + brcm_sata_phy_wr(base, RXPMD_REG_BANK, RXPMD_RX_CDR_CDR_ACQ_INTEG_BW, + ~tmp, value); + + /* Set CDR integral loop locking bandwidth to 1 for Gen 1/2/3 */ + tmp = RXPMD_G_CDR_LOCK_INT_BW_MASK << RXPMD_G1_CDR_LOCK_INT_BW_SHIFT | + RXPMD_G_CDR_LOCK_INT_BW_MASK << RXPMD_G2_CDR_LOCK_INT_BW_SHIFT | + RXPMD_G_CDR_LOCK_INT_BW_MASK << RXPMD_G3_CDR_LOCK_INT_BW_SHIFT; + if (port->ssc_en) + value = 1 << RXPMD_G1_CDR_LOCK_INT_BW_SHIFT | + 1 << RXPMD_G2_CDR_LOCK_INT_BW_SHIFT | + 1 << RXPMD_G3_CDR_LOCK_INT_BW_SHIFT; + else + value = 0; + brcm_sata_phy_wr(base, RXPMD_REG_BANK, RXPMD_RX_CDR_CDR_LOCK_INTEG_BW, + ~tmp, value); + + /* Set no guard band and clamp CDR */ + tmp = RXPMD_MON_CORRECT_EN | RXPMD_MON_MARGIN_VAL_MASK; + if (port->ssc_en) + value = 0x51; + else + value = 0; + brcm_sata_phy_wr(base, RXPMD_REG_BANK, RXPMD_RX_FREQ_MON_CONTROL1, + ~tmp, RXPMD_MON_CORRECT_EN | value); + + /* Turn on/off SSC */ + brcm_sata_phy_wr(base, TX_REG_BANK, TX_ACTRL5, ~TX_ACTRL5_SSC_EN, + port->ssc_en ? TX_ACTRL5_SSC_EN : 0); + + return 0; +} + +static int brcm_stb_sata_16nm_init(struct brcm_sata_port *port) +{ + return brcm_stb_sata_16nm_ssc_init(port); +} + /* NS2 SATA PLL1 defaults were characterized by H/W group */ #define NS2_PLL1_ACTRL2_MAGIC 0x1df8 #define NS2_PLL1_ACTRL3_MAGIC 0x2b00 @@ -544,6 +659,9 @@ static int brcm_sata_phy_init(struct phy *phy) struct brcm_sata_port *port = phy_get_drvdata(phy); switch (port->phy_priv->version) { + case BRCM_SATA_PHY_STB_16NM: + rc = brcm_stb_sata_16nm_init(port); + break; case BRCM_SATA_PHY_STB_28NM: case BRCM_SATA_PHY_STB_40NM: rc = brcm_stb_sata_init(port); @@ -601,6 +719,8 @@ static const struct phy_ops phy_ops = { }; static const struct of_device_id brcm_sata_phy_of_match[] = { + { .compatible = "brcm,bcm7216-sata-phy", + .data = (void *)BRCM_SATA_PHY_STB_16NM }, { .compatible = "brcm,bcm7445-sata-phy", .data = (void *)BRCM_SATA_PHY_STB_28NM }, { .compatible = "brcm,bcm7425-sata-phy", diff --git a/drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c b/drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c new file mode 100644 index 000000000000..456dc4a100c2 --- /dev/null +++ b/drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c @@ -0,0 +1,414 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright (c) 2018, Broadcom */ + +/* + * This module contains USB PHY initialization for power up and S3 resume + * for newer Synopsys based USB hardware first used on the bcm7216. + */ + +#include <linux/delay.h> +#include <linux/io.h> + +#include <linux/soc/brcmstb/brcmstb.h> +#include "phy-brcm-usb-init.h" + +#define PHY_LOCK_TIMEOUT_MS 200 + +/* Register definitions for syscon piarbctl registers */ +#define PIARBCTL_CAM 0x00 +#define PIARBCTL_SPLITTER 0x04 +#define PIARBCTL_MISC 0x08 +#define PIARBCTL_MISC_SECURE_MASK 0x80000000 +#define PIARBCTL_MISC_USB_SELECT_MASK 0x40000000 +#define PIARBCTL_MISC_USB_4G_SDRAM_MASK 0x20000000 +#define PIARBCTL_MISC_USB_PRIORITY_MASK 0x000f0000 +#define PIARBCTL_MISC_USB_MEM_PAGE_MASK 0x0000f000 +#define PIARBCTL_MISC_CAM1_MEM_PAGE_MASK 0x00000f00 +#define PIARBCTL_MISC_CAM0_MEM_PAGE_MASK 0x000000f0 +#define PIARBCTL_MISC_SATA_PRIORITY_MASK 0x0000000f + +#define PIARBCTL_MISC_USB_ONLY_MASK \ + (PIARBCTL_MISC_USB_SELECT_MASK | \ + PIARBCTL_MISC_USB_4G_SDRAM_MASK | \ + PIARBCTL_MISC_USB_PRIORITY_MASK | \ + PIARBCTL_MISC_USB_MEM_PAGE_MASK) + +/* Register definitions for the USB CTRL block */ +#define USB_CTRL_SETUP 0x00 +#define USB_CTRL_SETUP_STRAP_IPP_SEL_MASK 0x02000000 +#define USB_CTRL_SETUP_SCB2_EN_MASK 0x00008000 +#define USB_CTRL_SETUP_tca_drv_sel_MASK 0x01000000 +#define USB_CTRL_SETUP_SCB1_EN_MASK 0x00004000 +#define USB_CTRL_SETUP_SOFT_SHUTDOWN_MASK 0x00000200 +#define USB_CTRL_SETUP_IPP_MASK 0x00000020 +#define USB_CTRL_SETUP_IOC_MASK 0x00000010 +#define USB_CTRL_USB_PM 0x04 +#define USB_CTRL_USB_PM_USB_PWRDN_MASK 0x80000000 +#define USB_CTRL_USB_PM_SOFT_RESET_MASK 0x40000000 +#define USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK 0x00800000 +#define USB_CTRL_USB_PM_XHC_SOFT_RESETB_MASK 0x00400000 +#define USB_CTRL_USB_PM_STATUS 0x08 +#define USB_CTRL_USB_DEVICE_CTL1 0x10 +#define USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK 0x00000003 +#define USB_CTRL_TEST_PORT_CTL 0x30 +#define USB_CTRL_TEST_PORT_CTL_TPOUT_SEL_MASK 0x000000ff +#define USB_CTRL_TEST_PORT_CTL_TPOUT_SEL_PME_GEN_MASK 0x0000002e +#define USB_CTRL_TP_DIAG1 0x34 +#define USB_CTLR_TP_DIAG1_wake_MASK 0x00000002 +#define USB_CTRL_CTLR_CSHCR 0x50 +#define USB_CTRL_CTLR_CSHCR_ctl_pme_en_MASK 0x00040000 + +/* Register definitions for the USB_PHY block in 7211b0 */ +#define USB_PHY_PLL_CTL 0x00 +#define USB_PHY_PLL_CTL_PLL_RESETB_MASK 0x40000000 +#define USB_PHY_PLL_LDO_CTL 0x08 +#define USB_PHY_PLL_LDO_CTL_AFE_CORERDY_MASK 0x00000004 +#define USB_PHY_PLL_LDO_CTL_AFE_LDO_PWRDWNB_MASK 0x00000002 +#define USB_PHY_PLL_LDO_CTL_AFE_BG_PWRDWNB_MASK 0x00000001 +#define USB_PHY_UTMI_CTL_1 0x04 +#define USB_PHY_UTMI_CTL_1_POWER_UP_FSM_EN_MASK 0x00000800 +#define USB_PHY_UTMI_CTL_1_PHY_MODE_MASK 0x0000000c +#define USB_PHY_UTMI_CTL_1_PHY_MODE_SHIFT 2 +#define USB_PHY_IDDQ 0x1c +#define USB_PHY_IDDQ_phy_iddq_MASK 0x00000001 +#define USB_PHY_STATUS 0x20 +#define USB_PHY_STATUS_pll_lock_MASK 0x00000001 + +/* Register definitions for the MDIO registers in the DWC2 block of + * the 7211b0. + * NOTE: The PHY's MDIO registers are only accessible through the + * legacy DesignWare USB controller even though it's not being used. + */ +#define USB_GMDIOCSR 0 +#define USB_GMDIOGEN 4 + +/* Register definitions for the BDC EC block in 7211b0 */ +#define BDC_EC_AXIRDA 0x0c +#define BDC_EC_AXIRDA_RTS_MASK 0xf0000000 +#define BDC_EC_AXIRDA_RTS_SHIFT 28 + + +static void usb_mdio_write_7211b0(struct brcm_usb_init_params *params, + uint8_t addr, uint16_t data) +{ + void __iomem *usb_mdio = params->regs[BRCM_REGS_USB_MDIO]; + + addr &= 0x1f; /* 5-bit address */ + brcm_usb_writel(0xffffffff, usb_mdio + USB_GMDIOGEN); + while (brcm_usb_readl(usb_mdio + USB_GMDIOCSR) & (1<<31)) + ; + brcm_usb_writel(0x59020000 | (addr << 18) | data, + usb_mdio + USB_GMDIOGEN); + while (brcm_usb_readl(usb_mdio + USB_GMDIOCSR) & (1<<31)) + ; + brcm_usb_writel(0x00000000, usb_mdio + USB_GMDIOGEN); + while (brcm_usb_readl(usb_mdio + USB_GMDIOCSR) & (1<<31)) + ; +} + +static uint16_t __maybe_unused usb_mdio_read_7211b0( + struct brcm_usb_init_params *params, uint8_t addr) +{ + void __iomem *usb_mdio = params->regs[BRCM_REGS_USB_MDIO]; + + addr &= 0x1f; /* 5-bit address */ + brcm_usb_writel(0xffffffff, usb_mdio + USB_GMDIOGEN); + while (brcm_usb_readl(usb_mdio + USB_GMDIOCSR) & (1<<31)) + ; + brcm_usb_writel(0x69020000 | (addr << 18), usb_mdio + USB_GMDIOGEN); + while (brcm_usb_readl(usb_mdio + USB_GMDIOCSR) & (1<<31)) + ; + brcm_usb_writel(0x00000000, usb_mdio + USB_GMDIOGEN); + while (brcm_usb_readl(usb_mdio + USB_GMDIOCSR) & (1<<31)) + ; + return brcm_usb_readl(usb_mdio + USB_GMDIOCSR) & 0xffff; +} + +static void usb2_eye_fix_7211b0(struct brcm_usb_init_params *params) +{ + /* select bank */ + usb_mdio_write_7211b0(params, 0x1f, 0x80a0); + + /* Set the eye */ + usb_mdio_write_7211b0(params, 0x0a, 0xc6a0); +} + +static void xhci_soft_reset(struct brcm_usb_init_params *params, + int on_off) +{ + void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; + + /* Assert reset */ + if (on_off) + USB_CTRL_UNSET(ctrl, USB_PM, XHC_SOFT_RESETB); + /* De-assert reset */ + else + USB_CTRL_SET(ctrl, USB_PM, XHC_SOFT_RESETB); +} + +static void usb_init_ipp(struct brcm_usb_init_params *params) +{ + void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; + u32 reg; + u32 orig_reg; + + pr_debug("%s\n", __func__); + + orig_reg = reg = brcm_usb_readl(USB_CTRL_REG(ctrl, SETUP)); + if (params->ipp != 2) + /* override ipp strap pin (if it exits) */ + reg &= ~(USB_CTRL_MASK(SETUP, STRAP_IPP_SEL)); + + /* Override the default OC and PP polarity */ + reg &= ~(USB_CTRL_MASK(SETUP, IPP) | USB_CTRL_MASK(SETUP, IOC)); + if (params->ioc) + reg |= USB_CTRL_MASK(SETUP, IOC); + if (params->ipp == 1) + reg |= USB_CTRL_MASK(SETUP, IPP); + brcm_usb_writel(reg, USB_CTRL_REG(ctrl, SETUP)); + + /* + * If we're changing IPP, make sure power is off long enough + * to turn off any connected devices. + */ + if ((reg ^ orig_reg) & USB_CTRL_MASK(SETUP, IPP)) + msleep(50); +} + +static void syscon_piarbctl_init(struct regmap *rmap) +{ + /* Switch from legacy USB OTG controller to new STB USB controller */ + regmap_update_bits(rmap, PIARBCTL_MISC, PIARBCTL_MISC_USB_ONLY_MASK, + PIARBCTL_MISC_USB_SELECT_MASK | + PIARBCTL_MISC_USB_4G_SDRAM_MASK); +} + +static void usb_init_common(struct brcm_usb_init_params *params) +{ + u32 reg; + void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; + + pr_debug("%s\n", __func__); + + USB_CTRL_UNSET(ctrl, USB_PM, USB_PWRDN); + /* 1 millisecond - for USB clocks to settle down */ + usleep_range(1000, 2000); + + if (USB_CTRL_MASK(USB_DEVICE_CTL1, PORT_MODE)) { + reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1)); + reg &= ~USB_CTRL_MASK(USB_DEVICE_CTL1, PORT_MODE); + reg |= params->mode; + brcm_usb_writel(reg, USB_CTRL_REG(ctrl, USB_DEVICE_CTL1)); + } + switch (params->mode) { + case USB_CTLR_MODE_HOST: + USB_CTRL_UNSET(ctrl, USB_PM, BDC_SOFT_RESETB); + break; + default: + USB_CTRL_UNSET(ctrl, USB_PM, BDC_SOFT_RESETB); + USB_CTRL_SET(ctrl, USB_PM, BDC_SOFT_RESETB); + break; + } +} + +static void usb_wake_enable_7211b0(struct brcm_usb_init_params *params, + bool enable) +{ + void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; + + if (enable) + USB_CTRL_SET(ctrl, CTLR_CSHCR, ctl_pme_en); + else + USB_CTRL_UNSET(ctrl, CTLR_CSHCR, ctl_pme_en); +} + +static void usb_init_common_7211b0(struct brcm_usb_init_params *params) +{ + void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; + void __iomem *usb_phy = params->regs[BRCM_REGS_USB_PHY]; + void __iomem *bdc_ec = params->regs[BRCM_REGS_BDC_EC]; + int timeout_ms = PHY_LOCK_TIMEOUT_MS; + u32 reg; + + if (params->syscon_piarbctl) + syscon_piarbctl_init(params->syscon_piarbctl); + + USB_CTRL_UNSET(ctrl, USB_PM, USB_PWRDN); + + usb_wake_enable_7211b0(params, false); + if (!params->wake_enabled) { + + /* undo possible suspend settings */ + brcm_usb_writel(0, usb_phy + USB_PHY_IDDQ); + reg = brcm_usb_readl(usb_phy + USB_PHY_PLL_CTL); + reg |= USB_PHY_PLL_CTL_PLL_RESETB_MASK; + brcm_usb_writel(reg, usb_phy + USB_PHY_PLL_CTL); + + /* temporarily enable FSM so PHY comes up properly */ + reg = brcm_usb_readl(usb_phy + USB_PHY_UTMI_CTL_1); + reg |= USB_PHY_UTMI_CTL_1_POWER_UP_FSM_EN_MASK; + brcm_usb_writel(reg, usb_phy + USB_PHY_UTMI_CTL_1); + } + + /* Init the PHY */ + reg = USB_PHY_PLL_LDO_CTL_AFE_CORERDY_MASK | + USB_PHY_PLL_LDO_CTL_AFE_LDO_PWRDWNB_MASK | + USB_PHY_PLL_LDO_CTL_AFE_BG_PWRDWNB_MASK; + brcm_usb_writel(reg, usb_phy + USB_PHY_PLL_LDO_CTL); + + /* wait for lock */ + while (timeout_ms-- > 0) { + reg = brcm_usb_readl(usb_phy + USB_PHY_STATUS); + if (reg & USB_PHY_STATUS_pll_lock_MASK) + break; + usleep_range(1000, 2000); + } + + /* Set the PHY_MODE */ + reg = brcm_usb_readl(usb_phy + USB_PHY_UTMI_CTL_1); + reg &= ~USB_PHY_UTMI_CTL_1_PHY_MODE_MASK; + reg |= params->mode << USB_PHY_UTMI_CTL_1_PHY_MODE_SHIFT; + brcm_usb_writel(reg, usb_phy + USB_PHY_UTMI_CTL_1); + + /* Fix the incorrect default */ + reg = brcm_usb_readl(ctrl + USB_CTRL_SETUP); + reg &= ~USB_CTRL_SETUP_tca_drv_sel_MASK; + brcm_usb_writel(reg, ctrl + USB_CTRL_SETUP); + + usb_init_common(params); + + /* + * The BDC controller will get occasional failures with + * the default "Read Transaction Size" of 6 (1024 bytes). + * Set it to 4 (256 bytes). + */ + if ((params->mode != USB_CTLR_MODE_HOST) && bdc_ec) { + reg = brcm_usb_readl(bdc_ec + BDC_EC_AXIRDA); + reg &= ~BDC_EC_AXIRDA_RTS_MASK; + reg |= (0x4 << BDC_EC_AXIRDA_RTS_SHIFT); + brcm_usb_writel(reg, bdc_ec + BDC_EC_AXIRDA); + } + + /* + * Disable FSM, otherwise the PHY will auto suspend when no + * device is connected and will be reset on resume. + */ + reg = brcm_usb_readl(usb_phy + USB_PHY_UTMI_CTL_1); + reg &= ~USB_PHY_UTMI_CTL_1_POWER_UP_FSM_EN_MASK; + brcm_usb_writel(reg, usb_phy + USB_PHY_UTMI_CTL_1); + + usb2_eye_fix_7211b0(params); +} + +static void usb_init_xhci(struct brcm_usb_init_params *params) +{ + pr_debug("%s\n", __func__); + + xhci_soft_reset(params, 0); +} + +static void usb_uninit_common(struct brcm_usb_init_params *params) +{ + void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; + + pr_debug("%s\n", __func__); + + USB_CTRL_SET(ctrl, USB_PM, USB_PWRDN); + +} + +static void usb_uninit_common_7211b0(struct brcm_usb_init_params *params) +{ + void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; + void __iomem *usb_phy = params->regs[BRCM_REGS_USB_PHY]; + u32 reg; + + pr_debug("%s\n", __func__); + + if (params->wake_enabled) { + USB_CTRL_SET(ctrl, TEST_PORT_CTL, TPOUT_SEL_PME_GEN); + usb_wake_enable_7211b0(params, true); + } else { + USB_CTRL_SET(ctrl, USB_PM, USB_PWRDN); + brcm_usb_writel(0, usb_phy + USB_PHY_PLL_LDO_CTL); + reg = brcm_usb_readl(usb_phy + USB_PHY_PLL_CTL); + reg &= ~USB_PHY_PLL_CTL_PLL_RESETB_MASK; + brcm_usb_writel(reg, usb_phy + USB_PHY_PLL_CTL); + brcm_usb_writel(USB_PHY_IDDQ_phy_iddq_MASK, + usb_phy + USB_PHY_IDDQ); + } + +} + +static void usb_uninit_xhci(struct brcm_usb_init_params *params) +{ + + pr_debug("%s\n", __func__); + + if (!params->wake_enabled) + xhci_soft_reset(params, 1); +} + +static int usb_get_dual_select(struct brcm_usb_init_params *params) +{ + void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; + u32 reg = 0; + + pr_debug("%s\n", __func__); + + reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1)); + reg &= USB_CTRL_MASK(USB_DEVICE_CTL1, PORT_MODE); + return reg; +} + +static void usb_set_dual_select(struct brcm_usb_init_params *params, int mode) +{ + void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; + u32 reg; + + pr_debug("%s\n", __func__); + + reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1)); + reg &= ~USB_CTRL_MASK(USB_DEVICE_CTL1, PORT_MODE); + reg |= mode; + brcm_usb_writel(reg, USB_CTRL_REG(ctrl, USB_DEVICE_CTL1)); +} + +static const struct brcm_usb_init_ops bcm7216_ops = { + .init_ipp = usb_init_ipp, + .init_common = usb_init_common, + .init_xhci = usb_init_xhci, + .uninit_common = usb_uninit_common, + .uninit_xhci = usb_uninit_xhci, + .get_dual_select = usb_get_dual_select, + .set_dual_select = usb_set_dual_select, +}; + +static const struct brcm_usb_init_ops bcm7211b0_ops = { + .init_ipp = usb_init_ipp, + .init_common = usb_init_common_7211b0, + .init_xhci = usb_init_xhci, + .uninit_common = usb_uninit_common_7211b0, + .uninit_xhci = usb_uninit_xhci, + .get_dual_select = usb_get_dual_select, + .set_dual_select = usb_set_dual_select, +}; + +void brcm_usb_dvr_init_7216(struct brcm_usb_init_params *params) +{ + + pr_debug("%s\n", __func__); + + params->family_name = "7216"; + params->ops = &bcm7216_ops; +} + +void brcm_usb_dvr_init_7211b0(struct brcm_usb_init_params *params) +{ + + pr_debug("%s\n", __func__); + + params->family_name = "7211"; + params->ops = &bcm7211b0_ops; + params->suspend_with_clocks = true; +} diff --git a/drivers/phy/broadcom/phy-brcm-usb-init.c b/drivers/phy/broadcom/phy-brcm-usb-init.c index 91b5b09589d6..9391ab42a12b 100644 --- a/drivers/phy/broadcom/phy-brcm-usb-init.c +++ b/drivers/phy/broadcom/phy-brcm-usb-init.c @@ -42,6 +42,7 @@ #define USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK 0x80000000 /* option */ #define USB_CTRL_EBRIDGE 0x0c #define USB_CTRL_EBRIDGE_ESTOP_SCB_REQ_MASK 0x00020000 /* option */ +#define USB_CTRL_EBRIDGE_EBR_SCB_SIZE_MASK 0x00000f80 /* option */ #define USB_CTRL_OBRIDGE 0x10 #define USB_CTRL_OBRIDGE_LS_KEEP_ALIVE_MASK 0x08000000 #define USB_CTRL_MDIO 0x14 @@ -57,6 +58,8 @@ #define USB_CTRL_USB_PM_SOFT_RESET_MASK 0x40000000 /* option */ #define USB_CTRL_USB_PM_USB20_HC_RESETB_MASK 0x30000000 /* option */ #define USB_CTRL_USB_PM_USB20_HC_RESETB_VAR_MASK 0x00300000 /* option */ +#define USB_CTRL_USB_PM_RMTWKUP_EN_MASK 0x00000001 +#define USB_CTRL_USB_PM_STATUS 0x38 #define USB_CTRL_USB30_CTL1 0x60 #define USB_CTRL_USB30_CTL1_PHY3_PLL_SEQ_START_MASK 0x00000010 #define USB_CTRL_USB30_CTL1_PHY3_RESETB_MASK 0x00010000 @@ -126,10 +129,6 @@ enum { USB_CTRL_SELECTOR_COUNT, }; -#define USB_CTRL_REG(base, reg) ((void __iomem *)base + USB_CTRL_##reg) -#define USB_XHCI_EC_REG(base, reg) ((void __iomem *)base + USB_XHCI_EC_##reg) -#define USB_CTRL_MASK(reg, field) \ - USB_CTRL_##reg##_##field##_MASK #define USB_CTRL_MASK_FAMILY(params, reg, field) \ (params->usb_reg_bits_map[USB_CTRL_##reg##_##field##_SELECTOR]) @@ -140,13 +139,6 @@ enum { usb_ctrl_unset_family(params, USB_CTRL_##reg, \ USB_CTRL_##reg##_##field##_SELECTOR) -#define USB_CTRL_SET(base, reg, field) \ - usb_ctrl_set(USB_CTRL_REG(base, reg), \ - USB_CTRL_##reg##_##field##_MASK) -#define USB_CTRL_UNSET(base, reg, field) \ - usb_ctrl_unset(USB_CTRL_REG(base, reg), \ - USB_CTRL_##reg##_##field##_MASK) - #define MDIO_USB2 0 #define MDIO_USB3 BIT(31) @@ -176,6 +168,7 @@ static const struct id_to_type id_to_type_table[] = { { 0x33900000, BRCM_FAMILY_3390A0 }, { 0x72500010, BRCM_FAMILY_7250B0 }, { 0x72600000, BRCM_FAMILY_7260A0 }, + { 0x72550000, BRCM_FAMILY_7260A0 }, { 0x72680000, BRCM_FAMILY_7271A0 }, { 0x72710000, BRCM_FAMILY_7271A0 }, { 0x73640000, BRCM_FAMILY_7364A0 }, @@ -401,26 +394,14 @@ usb_reg_bits_map_table[BRCM_FAMILY_COUNT][USB_CTRL_SELECTOR_COUNT] = { }, }; -static inline u32 brcmusb_readl(void __iomem *addr) -{ - return readl(addr); -} - -static inline void brcmusb_writel(u32 val, void __iomem *addr) -{ - writel(val, addr); -} - static inline void usb_ctrl_unset_family(struct brcm_usb_init_params *params, u32 reg_offset, u32 field) { u32 mask; - void __iomem *reg; mask = params->usb_reg_bits_map[field]; - reg = params->ctrl_regs + reg_offset; - brcmusb_writel(brcmusb_readl(reg) & ~mask, reg); + brcm_usb_ctrl_unset(params->regs[BRCM_REGS_CTRL] + reg_offset, mask); }; static inline @@ -428,45 +409,27 @@ void usb_ctrl_set_family(struct brcm_usb_init_params *params, u32 reg_offset, u32 field) { u32 mask; - void __iomem *reg; mask = params->usb_reg_bits_map[field]; - reg = params->ctrl_regs + reg_offset; - brcmusb_writel(brcmusb_readl(reg) | mask, reg); + brcm_usb_ctrl_set(params->regs[BRCM_REGS_CTRL] + reg_offset, mask); }; -static inline void usb_ctrl_set(void __iomem *reg, u32 field) -{ - u32 value; - - value = brcmusb_readl(reg); - brcmusb_writel(value | field, reg); -} - -static inline void usb_ctrl_unset(void __iomem *reg, u32 field) -{ - u32 value; - - value = brcmusb_readl(reg); - brcmusb_writel(value & ~field, reg); -} - static u32 brcmusb_usb_mdio_read(void __iomem *ctrl_base, u32 reg, int mode) { u32 data; data = (reg << 16) | mode; - brcmusb_writel(data, USB_CTRL_REG(ctrl_base, MDIO)); + brcm_usb_writel(data, USB_CTRL_REG(ctrl_base, MDIO)); data |= (1 << 24); - brcmusb_writel(data, USB_CTRL_REG(ctrl_base, MDIO)); + brcm_usb_writel(data, USB_CTRL_REG(ctrl_base, MDIO)); data &= ~(1 << 24); /* wait for the 60MHz parallel to serial shifter */ usleep_range(10, 20); - brcmusb_writel(data, USB_CTRL_REG(ctrl_base, MDIO)); + brcm_usb_writel(data, USB_CTRL_REG(ctrl_base, MDIO)); /* wait for the 60MHz parallel to serial shifter */ usleep_range(10, 20); - return brcmusb_readl(USB_CTRL_REG(ctrl_base, MDIO2)) & 0xffff; + return brcm_usb_readl(USB_CTRL_REG(ctrl_base, MDIO2)) & 0xffff; } static void brcmusb_usb_mdio_write(void __iomem *ctrl_base, u32 reg, @@ -475,14 +438,14 @@ static void brcmusb_usb_mdio_write(void __iomem *ctrl_base, u32 reg, u32 data; data = (reg << 16) | val | mode; - brcmusb_writel(data, USB_CTRL_REG(ctrl_base, MDIO)); + brcm_usb_writel(data, USB_CTRL_REG(ctrl_base, MDIO)); data |= (1 << 25); - brcmusb_writel(data, USB_CTRL_REG(ctrl_base, MDIO)); + brcm_usb_writel(data, USB_CTRL_REG(ctrl_base, MDIO)); data &= ~(1 << 25); /* wait for the 60MHz parallel to serial shifter */ usleep_range(10, 20); - brcmusb_writel(data, USB_CTRL_REG(ctrl_base, MDIO)); + brcm_usb_writel(data, USB_CTRL_REG(ctrl_base, MDIO)); /* wait for the 60MHz parallel to serial shifter */ usleep_range(10, 20); } @@ -581,7 +544,7 @@ static void brcmusb_usb3_pll_54mhz(struct brcm_usb_init_params *params) { u32 ofs; int ii; - void __iomem *ctrl_base = params->ctrl_regs; + void __iomem *ctrl_base = params->regs[BRCM_REGS_CTRL]; /* * On newer B53 based SoC's, the reference clock for the @@ -662,7 +625,7 @@ static void brcmusb_usb3_ssc_enable(void __iomem *ctrl_base) static void brcmusb_usb3_phy_workarounds(struct brcm_usb_init_params *params) { - void __iomem *ctrl_base = params->ctrl_regs; + void __iomem *ctrl_base = params->regs[BRCM_REGS_CTRL]; brcmusb_usb3_pll_fix(ctrl_base); brcmusb_usb3_pll_54mhz(params); @@ -704,21 +667,21 @@ static void brcmusb_memc_fix(struct brcm_usb_init_params *params) static void brcmusb_usb3_otp_fix(struct brcm_usb_init_params *params) { - void __iomem *xhci_ec_base = params->xhci_ec_regs; + void __iomem *xhci_ec_base = params->regs[BRCM_REGS_XHCI_EC]; u32 val; if (params->family_id != 0x74371000 || !xhci_ec_base) return; - brcmusb_writel(0xa20c, USB_XHCI_EC_REG(xhc |