diff options
Diffstat (limited to 'drivers/phy')
-rw-r--r-- | drivers/phy/broadcom/phy-brcm-sata.c | 148 | ||||
-rw-r--r-- | drivers/phy/motorola/phy-mapphone-mdm6600.c | 27 | ||||
-rw-r--r-- | drivers/phy/phy-core.c | 18 | ||||
-rw-r--r-- | drivers/phy/ti/phy-gmii-sel.c | 10 |
4 files changed, 100 insertions, 103 deletions
diff --git a/drivers/phy/broadcom/phy-brcm-sata.c b/drivers/phy/broadcom/phy-brcm-sata.c index 4710cfcc3037..18251f232172 100644 --- a/drivers/phy/broadcom/phy-brcm-sata.c +++ b/drivers/phy/broadcom/phy-brcm-sata.c @@ -186,29 +186,6 @@ enum sata_phy_ctrl_regs { PHY_CTRL_1_RESET = BIT(0), }; -static inline void __iomem *brcm_sata_pcb_base(struct brcm_sata_port *port) -{ - struct brcm_sata_phy *priv = port->phy_priv; - u32 size = 0; - - switch (priv->version) { - case BRCM_SATA_PHY_STB_16NM: - case BRCM_SATA_PHY_STB_28NM: - case BRCM_SATA_PHY_IPROC_NS2: - case BRCM_SATA_PHY_DSL_28NM: - size = SATA_PCB_REG_28NM_SPACE_SIZE; - break; - case BRCM_SATA_PHY_STB_40NM: - size = SATA_PCB_REG_40NM_SPACE_SIZE; - break; - default: - dev_err(priv->dev, "invalid phy version\n"); - break; - } - - return priv->phy_base + (port->portnum * size); -} - static inline void __iomem *brcm_sata_ctrl_base(struct brcm_sata_port *port) { struct brcm_sata_phy *priv = port->phy_priv; @@ -226,19 +203,34 @@ static inline void __iomem *brcm_sata_ctrl_base(struct brcm_sata_port *port) return priv->ctrl_base + (port->portnum * size); } -static void brcm_sata_phy_wr(void __iomem *pcb_base, u32 bank, +static void brcm_sata_phy_wr(struct brcm_sata_port *port, u32 bank, u32 ofs, u32 msk, u32 value) { + struct brcm_sata_phy *priv = port->phy_priv; + void __iomem *pcb_base = priv->phy_base; u32 tmp; + if (priv->version == BRCM_SATA_PHY_STB_40NM) + bank += (port->portnum * SATA_PCB_REG_40NM_SPACE_SIZE); + else + pcb_base += (port->portnum * SATA_PCB_REG_28NM_SPACE_SIZE); + writel(bank, pcb_base + SATA_PCB_BANK_OFFSET); tmp = readl(pcb_base + SATA_PCB_REG_OFFSET(ofs)); tmp = (tmp & msk) | value; writel(tmp, pcb_base + SATA_PCB_REG_OFFSET(ofs)); } -static u32 brcm_sata_phy_rd(void __iomem *pcb_base, u32 bank, u32 ofs) +static u32 brcm_sata_phy_rd(struct brcm_sata_port *port, u32 bank, u32 ofs) { + struct brcm_sata_phy *priv = port->phy_priv; + void __iomem *pcb_base = priv->phy_base; + + if (priv->version == BRCM_SATA_PHY_STB_40NM) + bank += (port->portnum * SATA_PCB_REG_40NM_SPACE_SIZE); + else + pcb_base += (port->portnum * SATA_PCB_REG_28NM_SPACE_SIZE); + writel(bank, pcb_base + SATA_PCB_BANK_OFFSET); return readl(pcb_base + SATA_PCB_REG_OFFSET(ofs)); } @@ -250,16 +242,15 @@ static u32 brcm_sata_phy_rd(void __iomem *pcb_base, u32 bank, u32 ofs) static void brcm_stb_sata_ssc_init(struct brcm_sata_port *port) { - void __iomem *base = brcm_sata_pcb_base(port); struct brcm_sata_phy *priv = port->phy_priv; u32 tmp; /* override the TX spread spectrum setting */ tmp = TXPMD_CONTROL1_TX_SSC_EN_FRC_VAL | TXPMD_CONTROL1_TX_SSC_EN_FRC; - brcm_sata_phy_wr(base, TXPMD_REG_BANK, TXPMD_CONTROL1, ~tmp, tmp); + brcm_sata_phy_wr(port, TXPMD_REG_BANK, TXPMD_CONTROL1, ~tmp, tmp); /* set fixed min freq */ - brcm_sata_phy_wr(base, TXPMD_REG_BANK, TXPMD_TX_FREQ_CTRL_CONTROL2, + brcm_sata_phy_wr(port, TXPMD_REG_BANK, TXPMD_TX_FREQ_CTRL_CONTROL2, ~TXPMD_TX_FREQ_CTRL_CONTROL2_FMIN_MASK, STB_FMIN_VAL_DEFAULT); @@ -271,7 +262,7 @@ static void brcm_stb_sata_ssc_init(struct brcm_sata_port *port) tmp = STB_FMAX_VAL_DEFAULT; } - brcm_sata_phy_wr(base, TXPMD_REG_BANK, TXPMD_TX_FREQ_CTRL_CONTROL3, + brcm_sata_phy_wr(port, TXPMD_REG_BANK, TXPMD_TX_FREQ_CTRL_CONTROL3, ~TXPMD_TX_FREQ_CTRL_CONTROL3_FMAX_MASK, tmp); } @@ -280,7 +271,6 @@ static void brcm_stb_sata_ssc_init(struct brcm_sata_port *port) static int brcm_stb_sata_rxaeq_init(struct brcm_sata_port *port) { - void __iomem *base = brcm_sata_pcb_base(port); u32 tmp = 0, reg = 0; switch (port->rxaeq_mode) { @@ -301,8 +291,8 @@ static int brcm_stb_sata_rxaeq_init(struct brcm_sata_port *port) break; } - brcm_sata_phy_wr(base, AEQRX_REG_BANK_0, reg, ~tmp, tmp); - brcm_sata_phy_wr(base, AEQRX_REG_BANK_1, reg, ~tmp, tmp); + brcm_sata_phy_wr(port, AEQRX_REG_BANK_0, reg, ~tmp, tmp); + brcm_sata_phy_wr(port, AEQRX_REG_BANK_1, reg, ~tmp, tmp); return 0; } @@ -316,18 +306,17 @@ static int brcm_stb_sata_init(struct brcm_sata_port *port) static int brcm_stb_sata_16nm_ssc_init(struct brcm_sata_port *port) { - void __iomem *base = brcm_sata_pcb_base(port); u32 tmp, value; /* Reduce CP tail current to 1/16th of its default value */ - brcm_sata_phy_wr(base, PLL1_REG_BANK, PLL1_ACTRL6, 0, 0x141); + brcm_sata_phy_wr(port, PLL1_REG_BANK, PLL1_ACTRL6, 0, 0x141); /* Turn off CP tail current boost */ - brcm_sata_phy_wr(base, PLL1_REG_BANK, PLL1_ACTRL8, 0, 0xc006); + brcm_sata_phy_wr(port, PLL1_REG_BANK, PLL1_ACTRL8, 0, 0xc006); /* Set a specific AEQ equalizer value */ tmp = AEQ_FRC_EQ_FORCE_VAL | AEQ_FRC_EQ_FORCE; - brcm_sata_phy_wr(base, AEQRX_REG_BANK_0, AEQ_FRC_EQ, + brcm_sata_phy_wr(port, AEQRX_REG_BANK_0, AEQ_FRC_EQ, ~(tmp | AEQ_RFZ_FRC_VAL | AEQ_FRC_EQ_VAL_MASK << AEQ_FRC_EQ_VAL_SHIFT), tmp | 32 << AEQ_FRC_EQ_VAL_SHIFT); @@ -337,7 +326,7 @@ static int brcm_stb_sata_16nm_ssc_init(struct brcm_sata_port *port) value = 0x52; else value = 0; - brcm_sata_phy_wr(base, RXPMD_REG_BANK, RXPMD_RX_CDR_CONTROL1, + brcm_sata_phy_wr(port, RXPMD_REG_BANK, RXPMD_RX_CDR_CONTROL1, ~RXPMD_RX_PPM_VAL_MASK, value); /* Set proportional loop bandwith Gen1/2/3 */ @@ -352,7 +341,7 @@ static int brcm_stb_sata_16nm_ssc_init(struct brcm_sata_port *port) value = 1 << RXPMD_G1_CDR_PROP_BW_SHIFT | 1 << RXPMD_G2_CDR_PROP_BW_SHIFT | 1 << RXPMD_G3_CDR_PROB_BW_SHIFT; - brcm_sata_phy_wr(base, RXPMD_REG_BANK, RXPMD_RX_CDR_CDR_PROP_BW, ~tmp, + brcm_sata_phy_wr(port, RXPMD_REG_BANK, RXPMD_RX_CDR_CDR_PROP_BW, ~tmp, value); /* Set CDR integral loop acquisition bandwidth for Gen1/2/3 */ @@ -365,7 +354,7 @@ static int brcm_stb_sata_16nm_ssc_init(struct brcm_sata_port *port) 1 << RXPMD_G3_CDR_ACQ_INT_BW_SHIFT; else value = 0; - brcm_sata_phy_wr(base, RXPMD_REG_BANK, RXPMD_RX_CDR_CDR_ACQ_INTEG_BW, + brcm_sata_phy_wr(port, RXPMD_REG_BANK, RXPMD_RX_CDR_CDR_ACQ_INTEG_BW, ~tmp, value); /* Set CDR integral loop locking bandwidth to 1 for Gen 1/2/3 */ @@ -378,7 +367,7 @@ static int brcm_stb_sata_16nm_ssc_init(struct brcm_sata_port *port) 1 << RXPMD_G3_CDR_LOCK_INT_BW_SHIFT; else value = 0; - brcm_sata_phy_wr(base, RXPMD_REG_BANK, RXPMD_RX_CDR_CDR_LOCK_INTEG_BW, + brcm_sata_phy_wr(port, RXPMD_REG_BANK, RXPMD_RX_CDR_CDR_LOCK_INTEG_BW, ~tmp, value); /* Set no guard band and clamp CDR */ @@ -387,11 +376,11 @@ static int brcm_stb_sata_16nm_ssc_init(struct brcm_sata_port *port) value = 0x51; else value = 0; - brcm_sata_phy_wr(base, RXPMD_REG_BANK, RXPMD_RX_FREQ_MON_CONTROL1, + brcm_sata_phy_wr(port, RXPMD_REG_BANK, RXPMD_RX_FREQ_MON_CONTROL1, ~tmp, RXPMD_MON_CORRECT_EN | value); /* Turn on/off SSC */ - brcm_sata_phy_wr(base, TX_REG_BANK, TX_ACTRL5, ~TX_ACTRL5_SSC_EN, + brcm_sata_phy_wr(port, TX_REG_BANK, TX_ACTRL5, ~TX_ACTRL5_SSC_EN, port->ssc_en ? TX_ACTRL5_SSC_EN : 0); return 0; @@ -411,7 +400,6 @@ static int brcm_ns2_sata_init(struct brcm_sata_port *port) { int try; unsigned int val; - void __iomem *base = brcm_sata_pcb_base(port); void __iomem *ctrl_base = brcm_sata_ctrl_base(port); struct device *dev = port->phy_priv->dev; @@ -421,24 +409,24 @@ static int brcm_ns2_sata_init(struct brcm_sata_port *port) val |= (0x4 << OOB_CTRL1_BURST_MIN_SHIFT); val |= (0x9 << OOB_CTRL1_WAKE_IDLE_MAX_SHIFT); val |= (0x3 << OOB_CTRL1_WAKE_IDLE_MIN_SHIFT); - brcm_sata_phy_wr(base, OOB_REG_BANK, OOB_CTRL1, 0x0, val); + brcm_sata_phy_wr(port, OOB_REG_BANK, OOB_CTRL1, 0x0, val); val = 0x0; val |= (0x1b << OOB_CTRL2_RESET_IDLE_MAX_SHIFT); val |= (0x2 << OOB_CTRL2_BURST_CNT_SHIFT); val |= (0x9 << OOB_CTRL2_RESET_IDLE_MIN_SHIFT); - brcm_sata_phy_wr(base, OOB_REG_BANK, OOB_CTRL2, 0x0, val); + brcm_sata_phy_wr(port, OOB_REG_BANK, OOB_CTRL2, 0x0, val); /* Configure PHY PLL register bank 1 */ val = NS2_PLL1_ACTRL2_MAGIC; - brcm_sata_phy_wr(base, PLL1_REG_BANK, PLL1_ACTRL2, 0x0, val); + brcm_sata_phy_wr(port, PLL1_REG_BANK, PLL1_ACTRL2, 0x0, val); val = NS2_PLL1_ACTRL3_MAGIC; - brcm_sata_phy_wr(base, PLL1_REG_BANK, PLL1_ACTRL3, 0x0, val); + brcm_sata_phy_wr(port, PLL1_REG_BANK, PLL1_ACTRL3, 0x0, val); val = NS2_PLL1_ACTRL4_MAGIC; - brcm_sata_phy_wr(base, PLL1_REG_BANK, PLL1_ACTRL4, 0x0, val); + brcm_sata_phy_wr(port, PLL1_REG_BANK, PLL1_ACTRL4, 0x0, val); /* Configure PHY BLOCK0 register bank */ /* Set oob_clk_sel to refclk/2 */ - brcm_sata_phy_wr(base, BLOCK0_REG_BANK, BLOCK0_SPARE, + brcm_sata_phy_wr(port, BLOCK0_REG_BANK, BLOCK0_SPARE, ~BLOCK0_SPARE_OOB_CLK_SEL_MASK, BLOCK0_SPARE_OOB_CLK_SEL_REFBY2); @@ -451,7 +439,7 @@ static int brcm_ns2_sata_init(struct brcm_sata_port *port) /* Wait for PHY PLL lock by polling pll_lock bit */ try = 50; while (try) { - val = brcm_sata_phy_rd(base, BLOCK0_REG_BANK, + val = brcm_sata_phy_rd(port, BLOCK0_REG_BANK, BLOCK0_XGXSSTATUS); if (val & BLOCK0_XGXSSTATUS_PLL_LOCK) break; @@ -471,9 +459,7 @@ static int brcm_ns2_sata_init(struct brcm_sata_port *port) static int brcm_nsp_sata_init(struct brcm_sata_port *port) { - struct brcm_sata_phy *priv = port->phy_priv; struct device *dev = port->phy_priv->dev; - void __iomem *base = priv->phy_base; unsigned int oob_bank; unsigned int val, try; @@ -490,36 +476,36 @@ static int brcm_nsp_sata_init(struct brcm_sata_port *port) val |= (0x06 << OOB_CTRL1_BURST_MIN_SHIFT); val |= (0x0f << OOB_CTRL1_WAKE_IDLE_MAX_SHIFT); val |= (0x06 << OOB_CTRL1_WAKE_IDLE_MIN_SHIFT); - brcm_sata_phy_wr(base, oob_bank, OOB_CTRL1, 0x0, val); + brcm_sata_phy_wr(port, oob_bank, OOB_CTRL1, 0x0, val); val = 0x0; val |= (0x2e << OOB_CTRL2_RESET_IDLE_MAX_SHIFT); val |= (0x02 << OOB_CTRL2_BURST_CNT_SHIFT); val |= (0x16 << OOB_CTRL2_RESET_IDLE_MIN_SHIFT); - brcm_sata_phy_wr(base, oob_bank, OOB_CTRL2, 0x0, val); + brcm_sata_phy_wr(port, oob_bank, OOB_CTRL2, 0x0, val); - brcm_sata_phy_wr(base, PLL_REG_BANK_0, PLL_ACTRL2, + brcm_sata_phy_wr(port, PLL_REG_BANK_0, PLL_ACTRL2, ~(PLL_ACTRL2_SELDIV_MASK << PLL_ACTRL2_SELDIV_SHIFT), 0x0c << PLL_ACTRL2_SELDIV_SHIFT); - brcm_sata_phy_wr(base, PLL_REG_BANK_0, PLL_CAP_CONTROL, + brcm_sata_phy_wr(port, PLL_REG_BANK_0, PLL_CAP_CONTROL, 0xff0, 0x4f0); val = PLLCONTROL_0_FREQ_DET_RESTART | PLLCONTROL_0_FREQ_MONITOR; - brcm_sata_phy_wr(base, PLL_REG_BANK_0, PLL_REG_BANK_0_PLLCONTROL_0, + brcm_sata_phy_wr(port, PLL_REG_BANK_0, PLL_REG_BANK_0_PLLCONTROL_0, ~val, val); val = PLLCONTROL_0_SEQ_START; - brcm_sata_phy_wr(base, PLL_REG_BANK_0, PLL_REG_BANK_0_PLLCONTROL_0, + brcm_sata_phy_wr(port, PLL_REG_BANK_0, PLL_REG_BANK_0_PLLCONTROL_0, ~val, 0); mdelay(10); - brcm_sata_phy_wr(base, PLL_REG_BANK_0, PLL_REG_BANK_0_PLLCONTROL_0, + brcm_sata_phy_wr(port, PLL_REG_BANK_0, PLL_REG_BANK_0_PLLCONTROL_0, ~val, val); /* Wait for pll_seq_done bit */ try = 50; while (--try) { - val = brcm_sata_phy_rd(base, BLOCK0_REG_BANK, + val = brcm_sata_phy_rd(port, BLOCK0_REG_BANK, BLOCK0_XGXSSTATUS); if (val & BLOCK0_XGXSSTATUS_PLL_LOCK) break; @@ -546,27 +532,25 @@ static int brcm_nsp_sata_init(struct brcm_sata_port *port) static int brcm_sr_sata_init(struct brcm_sata_port *port) { - struct brcm_sata_phy *priv = port->phy_priv; struct device *dev = port->phy_priv->dev; - void __iomem *base = priv->phy_base; unsigned int val, try; /* Configure PHY PLL register bank 1 */ val = SR_PLL1_ACTRL2_MAGIC; - brcm_sata_phy_wr(base, PLL1_REG_BANK, PLL1_ACTRL2, 0x0, val); + brcm_sata_phy_wr(port, PLL1_REG_BANK, PLL1_ACTRL2, 0x0, val); val = SR_PLL1_ACTRL3_MAGIC; - brcm_sata_phy_wr(base, PLL1_REG_BANK, PLL1_ACTRL3, 0x0, val); + brcm_sata_phy_wr(port, PLL1_REG_BANK, PLL1_ACTRL3, 0x0, val); val = SR_PLL1_ACTRL4_MAGIC; - brcm_sata_phy_wr(base, PLL1_REG_BANK, PLL1_ACTRL4, 0x0, val); + brcm_sata_phy_wr(port, PLL1_REG_BANK, PLL1_ACTRL4, 0x0, val); /* Configure PHY PLL register bank 0 */ val = SR_PLL0_ACTRL6_MAGIC; - brcm_sata_phy_wr(base, PLL_REG_BANK_0, PLL_ACTRL6, 0x0, val); + brcm_sata_phy_wr(port, PLL_REG_BANK_0, PLL_ACTRL6, 0x0, val); /* Wait for PHY PLL lock by polling pll_lock bit */ try = 50; do { - val = brcm_sata_phy_rd(base, BLOCK0_REG_BANK, + val = brcm_sata_phy_rd(port, BLOCK0_REG_BANK, BLOCK0_XGXSSTATUS); if (val & BLOCK0_XGXSSTATUS_PLL_LOCK) break; @@ -581,7 +565,7 @@ static int brcm_sr_sata_init(struct brcm_sata_port *port) } /* Invert Tx polarity */ - brcm_sata_phy_wr(base, TX_REG_BANK, TX_ACTRL0, + brcm_sata_phy_wr(port, TX_REG_BANK, TX_ACTRL0, ~TX_ACTRL0_TXPOL_FLIP, TX_ACTRL0_TXPOL_FLIP); /* Configure OOB control to handle 100MHz reference clock */ @@ -589,52 +573,51 @@ static int brcm_sr_sata_init(struct brcm_sata_port *port) (0x4 << OOB_CTRL1_BURST_MIN_SHIFT) | (0x8 << OOB_CTRL1_WAKE_IDLE_MAX_SHIFT) | (0x3 << OOB_CTRL1_WAKE_IDLE_MIN_SHIFT)); - brcm_sata_phy_wr(base, OOB_REG_BANK, OOB_CTRL1, 0x0, val); + brcm_sata_phy_wr(port, OOB_REG_BANK, OOB_CTRL1, 0x0, val); val = ((0x1b << OOB_CTRL2_RESET_IDLE_MAX_SHIFT) | (0x2 << OOB_CTRL2_BURST_CNT_SHIFT) | (0x9 << OOB_CTRL2_RESET_IDLE_MIN_SHIFT)); - brcm_sata_phy_wr(base, OOB_REG_BANK, OOB_CTRL2, 0x0, val); + brcm_sata_phy_wr(port, OOB_REG_BANK, OOB_CTRL2, 0x0, val); return 0; } static int brcm_dsl_sata_init(struct brcm_sata_port *port) { - void __iomem *base = brcm_sata_pcb_base(port); struct device *dev = port->phy_priv->dev; unsigned int try; u32 tmp; - brcm_sata_phy_wr(base, PLL1_REG_BANK, PLL1_ACTRL7, 0, 0x873); + brcm_sata_phy_wr(port, PLL1_REG_BANK, PLL1_ACTRL7, 0, 0x873); - brcm_sata_phy_wr(base, PLL1_REG_BANK, PLL1_ACTRL6, 0, 0xc000); + brcm_sata_phy_wr(port, PLL1_REG_BANK, PLL1_ACTRL6, 0, 0xc000); - brcm_sata_phy_wr(base, PLL_REG_BANK_0, PLL_REG_BANK_0_PLLCONTROL_0, + brcm_sata_phy_wr(port, PLL_REG_BANK_0, PLL_REG_BANK_0_PLLCONTROL_0, 0, 0x3089); usleep_range(1000, 2000); - brcm_sata_phy_wr(base, PLL_REG_BANK_0, PLL_REG_BANK_0_PLLCONTROL_0, + brcm_sata_phy_wr(port, PLL_REG_BANK_0, PLL_REG_BANK_0_PLLCONTROL_0, 0, 0x3088); usleep_range(1000, 2000); - brcm_sata_phy_wr(base, AEQRX_REG_BANK_1, AEQRX_SLCAL0_CTRL0, + brcm_sata_phy_wr(port, AEQRX_REG_BANK_1, AEQRX_SLCAL0_CTRL0, 0, 0x3000); - brcm_sata_phy_wr(base, AEQRX_REG_BANK_1, AEQRX_SLCAL1_CTRL0, + brcm_sata_phy_wr(port, AEQRX_REG_BANK_1, AEQRX_SLCAL1_CTRL0, 0, 0x3000); usleep_range(1000, 2000); - brcm_sata_phy_wr(base, PLL_REG_BANK_0, PLL_CAP_CHARGE_TIME, 0, 0x32); + brcm_sata_phy_wr(port, PLL_REG_BANK_0, PLL_CAP_CHARGE_TIME, 0, 0x32); - brcm_sata_phy_wr(base, PLL_REG_BANK_0, PLL_VCO_CAL_THRESH, 0, 0xa); + brcm_sata_phy_wr(port, PLL_REG_BANK_0, PLL_VCO_CAL_THRESH, 0, 0xa); - brcm_sata_phy_wr(base, PLL_REG_BANK_0, PLL_FREQ_DET_TIME, 0, 0x64); + brcm_sata_phy_wr(port, PLL_REG_BANK_0, PLL_FREQ_DET_TIME, 0, 0x64); usleep_range(1000, 2000); /* Acquire PLL lock */ try = 50; while (try) { - tmp = brcm_sata_phy_rd(base, BLOCK0_REG_BANK, + tmp = brcm_sata_phy_rd(port, BLOCK0_REG_BANK, BLOCK0_XGXSSTATUS); if (tmp & BLOCK0_XGXSSTATUS_PLL_LOCK) break; @@ -687,10 +670,9 @@ static int brcm_sata_phy_init(struct phy *phy) static void brcm_stb_sata_calibrate(struct brcm_sata_port *port) { - void __iomem *base = brcm_sata_pcb_base(port); u32 tmp = BIT(8); - brcm_sata_phy_wr(base, RXPMD_REG_BANK, RXPMD_RX_FREQ_MON_CONTROL1, + brcm_sata_phy_wr(port, RXPMD_REG_BANK, RXPMD_RX_FREQ_MON_CONTROL1, ~tmp, tmp); } diff --git a/drivers/phy/motorola/phy-mapphone-mdm6600.c b/drivers/phy/motorola/phy-mapphone-mdm6600.c index f20524f0c21d..94a34cf75eb3 100644 --- a/drivers/phy/motorola/phy-mapphone-mdm6600.c +++ b/drivers/phy/motorola/phy-mapphone-mdm6600.c @@ -20,6 +20,7 @@ #define PHY_MDM6600_PHY_DELAY_MS 4000 /* PHY enable 2.2s to 3.5s */ #define PHY_MDM6600_ENABLED_DELAY_MS 8000 /* 8s more total for MDM6600 */ +#define PHY_MDM6600_WAKE_KICK_MS 600 /* time on after GPIO toggle */ #define MDM6600_MODEM_IDLE_DELAY_MS 1000 /* modem after USB suspend */ #define MDM6600_MODEM_WAKE_DELAY_MS 200 /* modem response after idle */ @@ -243,10 +244,24 @@ static irqreturn_t phy_mdm6600_wakeirq_thread(int irq, void *data) { struct phy_mdm6600 *ddata = data; struct gpio_desc *mode_gpio1; + int error, wakeup; mode_gpio1 = ddata->mode_gpios->desc[PHY_MDM6600_MODE1]; - dev_dbg(ddata->dev, "OOB wake on mode_gpio1: %i\n", - gpiod_get_value(mode_gpio1)); + wakeup = gpiod_get_value(mode_gpio1); + if (!wakeup) + return IRQ_NONE; + + dev_dbg(ddata->dev, "OOB wake on mode_gpio1: %i\n", wakeup); + error = pm_runtime_get_sync(ddata->dev); + if (error < 0) { + pm_runtime_put_noidle(ddata->dev); + + return IRQ_NONE; + } + + /* Just wake-up and kick the autosuspend timer */ + pm_runtime_mark_last_busy(ddata->dev); + pm_runtime_put_autosuspend(ddata->dev); return IRQ_HANDLED; } @@ -496,8 +511,14 @@ static void phy_mdm6600_modem_wake(struct work_struct *work) ddata = container_of(work, struct phy_mdm6600, modem_wake_work.work); phy_mdm6600_wake_modem(ddata); + + /* + * The modem does not always stay awake 1.2 seconds after toggling + * the wake GPIO, and sometimes it idles after about some 600 ms + * making writes time out. + */ schedule_delayed_work(&ddata->modem_wake_work, - msecs_to_jiffies(MDM6600_MODEM_IDLE_DELAY_MS)); + msecs_to_jiffies(PHY_MDM6600_WAKE_KICK_MS)); } static int __maybe_unused phy_mdm6600_runtime_suspend(struct device *dev) diff --git a/drivers/phy/phy-core.c b/drivers/phy/phy-core.c index cd5a6c95dbdc..a27b8d578d7f 100644 --- a/drivers/phy/phy-core.c +++ b/drivers/phy/phy-core.c @@ -688,11 +688,9 @@ struct phy *phy_get(struct device *dev, const char *string) get_device(&phy->dev); link = device_link_add(dev, &phy->dev, DL_FLAG_STATELESS); - if (!link) { - dev_err(dev, "failed to create device link to %s\n", + if (!link) + dev_dbg(dev, "failed to create device link to %s\n", dev_name(phy->dev.parent)); - return ERR_PTR(-EINVAL); - } return phy; } @@ -803,11 +801,9 @@ struct phy *devm_of_phy_get(struct device *dev, struct device_node *np, } link = device_link_add(dev, &phy->dev, DL_FLAG_STATELESS); - if (!link) { - dev_err(dev, "failed to create device link to %s\n", + if (!link) + dev_dbg(dev, "failed to create device link to %s\n", dev_name(phy->dev.parent)); - return ERR_PTR(-EINVAL); - } return phy; } @@ -852,11 +848,9 @@ struct phy *devm_of_phy_get_by_index(struct device *dev, struct device_node *np, devres_add(dev, ptr); link = device_link_add(dev, &phy->dev, DL_FLAG_STATELESS); - if (!link) { - dev_err(dev, "failed to create device link to %s\n", + if (!link) + dev_dbg(dev, "failed to create device link to %s\n", dev_name(phy->dev.parent)); - return ERR_PTR(-EINVAL); - } return phy; } diff --git a/drivers/phy/ti/phy-gmii-sel.c b/drivers/phy/ti/phy-gmii-sel.c index a28bd15297f5..1c536fc03c83 100644 --- a/drivers/phy/ti/phy-gmii-sel.c +++ b/drivers/phy/ti/phy-gmii-sel.c @@ -80,20 +80,20 @@ static int phy_gmii_sel_mode(struct phy *phy, enum phy_mode mode, int submode) break; case PHY_INTERFACE_MODE_MII: - mode = AM33XX_GMII_SEL_MODE_MII; + case PHY_INTERFACE_MODE_GMII: + gmii_sel_mode = AM33XX_GMII_SEL_MODE_MII; break; default: - dev_warn(dev, - "port%u: unsupported mode: \"%s\". Defaulting to MII.\n", - if_phy->id, phy_modes(rgmii_id)); + dev_warn(dev, "port%u: unsupported mode: \"%s\"\n", + if_phy->id, phy_modes(submode)); return -EINVAL; } if_phy->phy_if_mode = submode; dev_dbg(dev, "%s id:%u mode:%u rgmii_id:%d rmii_clk_ext:%d\n", - __func__, if_phy->id, mode, rgmii_id, + __func__, if_phy->id, submode, rgmii_id, if_phy->rmii_clock_external); regfield = if_phy->fields[PHY_GMII_SEL_PORT_MODE]; |