diff options
Diffstat (limited to 'drivers/net/wireless/marvell')
33 files changed, 16257 insertions, 0 deletions
diff --git a/drivers/net/wireless/marvell/Kconfig b/drivers/net/wireless/marvell/Kconfig new file mode 100644 index 000000000000..7842096bea53 --- /dev/null +++ b/drivers/net/wireless/marvell/Kconfig @@ -0,0 +1,16 @@ +config WLAN_VENDOR_MARVELL + bool "Marvell devices" + default y + ---help--- + If you have a wireless card belonging to this class, say Y. + + Note that the answer to this question doesn't directly affect the + kernel: saying N will just cause the configurator to skip all + the questions about cards. If you say Y, you will be asked for + your specific card in the following questions. + +if WLAN_VENDOR_MARVELL + +source "drivers/net/wireless/marvell/libertas/Kconfig" + +endif # WLAN_VENDOR_MARVELL diff --git a/drivers/net/wireless/marvell/Makefile b/drivers/net/wireless/marvell/Makefile new file mode 100644 index 000000000000..6f7ac46ded33 --- /dev/null +++ b/drivers/net/wireless/marvell/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_LIBERTAS) += libertas/ diff --git a/drivers/net/wireless/marvell/libertas/Kconfig b/drivers/net/wireless/marvell/libertas/Kconfig new file mode 100644 index 000000000000..e6268ceacbf1 --- /dev/null +++ b/drivers/net/wireless/marvell/libertas/Kconfig @@ -0,0 +1,45 @@ +config LIBERTAS + tristate "Marvell 8xxx Libertas WLAN driver support" + depends on CFG80211 + select WIRELESS_EXT + select WEXT_SPY + select LIB80211 + select FW_LOADER + ---help--- + A library for Marvell Libertas 8xxx devices. + +config LIBERTAS_USB + tristate "Marvell Libertas 8388 USB 802.11b/g cards" + depends on LIBERTAS && USB + ---help--- + A driver for Marvell Libertas 8388 USB devices. + +config LIBERTAS_CS + tristate "Marvell Libertas 8385 CompactFlash 802.11b/g cards" + depends on LIBERTAS && PCMCIA && HAS_IOPORT_MAP + ---help--- + A driver for Marvell Libertas 8385 CompactFlash devices. + +config LIBERTAS_SDIO + tristate "Marvell Libertas 8385/8686/8688 SDIO 802.11b/g cards" + depends on LIBERTAS && MMC + ---help--- + A driver for Marvell Libertas 8385/8686/8688 SDIO devices. + +config LIBERTAS_SPI + tristate "Marvell Libertas 8686 SPI 802.11b/g cards" + depends on LIBERTAS && SPI + ---help--- + A driver for Marvell Libertas 8686 SPI devices. + +config LIBERTAS_DEBUG + bool "Enable full debugging output in the Libertas module." + depends on LIBERTAS + ---help--- + Debugging support. + +config LIBERTAS_MESH + bool "Enable mesh support" + depends on LIBERTAS + help + This enables Libertas' MESH support, used by e.g. the OLPC people. diff --git a/drivers/net/wireless/marvell/libertas/LICENSE b/drivers/net/wireless/marvell/libertas/LICENSE new file mode 100644 index 000000000000..8862742213b9 --- /dev/null +++ b/drivers/net/wireless/marvell/libertas/LICENSE @@ -0,0 +1,16 @@ + Copyright (c) 2003-2006, Marvell International Ltd. + All Rights Reserved + + This program is free software; you can redistribute it and/or modify it + under the terms of version 2 of the GNU General Public License as + published by the Free Software Foundation. + + This program is distributed in the hope that it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., 59 + Temple Place - Suite 330, Boston, MA 02111-1307, USA. + diff --git a/drivers/net/wireless/marvell/libertas/Makefile b/drivers/net/wireless/marvell/libertas/Makefile new file mode 100644 index 000000000000..eac72f7bd341 --- /dev/null +++ b/drivers/net/wireless/marvell/libertas/Makefile @@ -0,0 +1,21 @@ +libertas-y += cfg.o +libertas-y += cmd.o +libertas-y += cmdresp.o +libertas-y += debugfs.o +libertas-y += ethtool.o +libertas-y += main.o +libertas-y += rx.o +libertas-y += tx.o +libertas-y += firmware.o +libertas-$(CONFIG_LIBERTAS_MESH) += mesh.o + +usb8xxx-objs += if_usb.o +libertas_cs-objs += if_cs.o +libertas_sdio-objs += if_sdio.o +libertas_spi-objs += if_spi.o + +obj-$(CONFIG_LIBERTAS) += libertas.o +obj-$(CONFIG_LIBERTAS_USB) += usb8xxx.o +obj-$(CONFIG_LIBERTAS_CS) += libertas_cs.o +obj-$(CONFIG_LIBERTAS_SDIO) += libertas_sdio.o +obj-$(CONFIG_LIBERTAS_SPI) += libertas_spi.o diff --git a/drivers/net/wireless/marvell/libertas/README b/drivers/net/wireless/marvell/libertas/README new file mode 100644 index 000000000000..1a554a685e91 --- /dev/null +++ b/drivers/net/wireless/marvell/libertas/README @@ -0,0 +1,239 @@ +================================================================================ + README for Libertas + + (c) Copyright © 2003-2006, Marvell International Ltd. + All Rights Reserved + + This software file (the "File") is distributed by Marvell International + Ltd. under the terms of the GNU General Public License Version 2, June 1991 + (the "License"). You may use, redistribute and/or modify this File in + accordance with the terms and conditions of the License, a copy of which + is available along with the File in the license.txt file or on the worldwide + web at http://www.gnu.org/licenses/gpl.txt. + + THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE + IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE + ARE EXPRESSLY DISCLAIMED. The License provides additional details about + this warranty disclaimer. +================================================================================ + +===================== +DRIVER LOADING +===================== + + o. Copy the firmware image (e.g. usb8388.bin) to /lib/firmware/ + + o. Load driver by using the following command: + + insmod usb8388.ko [fw_name=usb8388.bin] + +========================= +ETHTOOL +========================= + + +Use the -i option to retrieve version information from the driver. + +# ethtool -i eth0 +driver: libertas +version: COMM-USB8388-318.p4 +firmware-version: 5.110.7 +bus-info: + +Use the -e option to read the EEPROM contents of the card. + + Usage: + ethtool -e ethX [raw on|off] [offset N] [length N] + + -e retrieves and prints an EEPROM dump for the specified ethernet + device. When raw is enabled, then it dumps the raw EEPROM data + to stdout. The length and offset parameters allow dumping cer- + tain portions of the EEPROM. Default is to dump the entire EEP- + ROM. + +# ethtool -e eth0 offset 0 length 16 +Offset Values +------ ------ +0x0000 38 33 30 58 00 00 34 f4 00 00 10 00 00 c4 17 00 + +======================== +DEBUGFS COMMANDS +======================== + +those commands are used via debugfs interface + +=========== +rdmac +rdbbp +rdrf + These commands are used to read the MAC, BBP and RF registers from the + card. These commands take one parameter that specifies the offset + location that is to be read. This parameter must be specified in + hexadecimal (its possible to precede preceding the number with a "0x"). + + Path: /sys/kernel/debug/libertas_wireless/ethX/registers/ + + Usage: + echo "0xa123" > rdmac ; cat rdmac + echo "0xa123" > rdbbp ; cat rdbbp + echo "0xa123" > rdrf ; cat rdrf +wrmac +wrbbp +wrrf + These commands are used to write the MAC, BBP and RF registers in the + card. These commands take two parameters that specify the offset + location and the value that is to be written. This parameters must + be specified in hexadecimal (its possible to precede the number + with a "0x"). + + Usage: + echo "0xa123 0xaa" > wrmac + echo "0xa123 0xaa" > wrbbp + echo "0xa123 0xaa" > wrrf + +sleepparams + This command is used to set the sleepclock configurations + + Path: /sys/kernel/debug/libertas_wireless/ethX/ + + Usage: + cat sleepparams: reads the current sleepclock configuration + + echo "p1 p2 p3 p4 p5 p6" > sleepparams: writes the sleepclock configuration. + + where: + p1 is Sleep clock error in ppm (0-65535) + p2 is Wakeup offset in usec (0-65535) + p3 is Clock stabilization time in usec (0-65535) + p4 is Control periodic calibration (0-2) + p5 is Control the use of external sleep clock (0-2) + p6 is reserved for debug (0-65535) + +subscribed_events + + The subscribed_events directory contains the interface for the + subscribed events API. + + Path: /sys/kernel/debug/libertas_wireless/ethX/subscribed_events/ + + Each event is represented by a filename. Each filename consists of the + following three fields: + Value Frequency Subscribed + + To read the current values for a given event, do: + cat event + To set the current values, do: + echo "60 2 1" > event + + Frequency field specifies the reporting frequency for this event. + If it is set to 0, then the event is reported only once, and then + automatically unsubscribed. If it is set to 1, then the event is + reported every time it occurs. If it is set to N, then the event is + reported every Nth time it occurs. + + beacon_missed + Value field specifies the number of consecutive missing beacons which + triggers the LINK_LOSS event. This event is generated only once after + which the firmware resets its state. At initialization, the LINK_LOSS + event is subscribed by default. The default value of MissedBeacons is + 60. + + failure_count + Value field specifies the consecutive failure count threshold which + triggers the generation of the MAX_FAIL event. Once this event is + generated, the consecutive failure count is reset to 0. + At initialization, the MAX_FAIL event is NOT subscribed by + default. + + high_rssi + This event is generated when the average received RSSI in beacons goes + above a threshold, specified by Value. + + low_rssi + This event is generated when the average received RSSI in beacons goes + below a threshold, specified by Value. + + high_snr + This event is generated when the average received SNR in beacons goes + above a threshold, specified by Value. + + low_snr + This event is generated when the average received SNR in beacons goes + below a threshold, specified by Value. + +extscan + This command is used to do a specific scan. + + Path: /sys/kernel/debug/libertas_wireless/ethX/ + + Usage: echo "SSID" > extscan + + Example: + echo "LINKSYS-AP" > extscan + + To see the results of use getscantable command. + +getscantable + + Display the current contents of the driver scan table (ie. get the + scan results). + + Path: /sys/kernel/debug/libertas_wireless/ethX/ + + Usage: + cat getscantable + +setuserscan + Initiate a customized scan and retrieve the results + + + Path: /sys/kernel/debug/libertas_wireless/ethX/ + + Usage: + echo "[ARGS]" > setuserscan + + where [ARGS]: + + bssid=xx:xx:xx:xx:xx:xx specify a BSSID filter for the scan + ssid="[SSID]" specify a SSID filter for the scan + keep=[0 or 1] keep the previous scan results (1), discard (0) + dur=[scan time] time to scan for each channel in milliseconds + type=[1,2,3] BSS type: 1 (Infra), 2(Adhoc), 3(Any) + + Any combination of the above arguments can be supplied on the command + line. If dur tokens are absent, the driver default setting will be used. + The bssid and ssid fields, if blank, will produce an unfiltered scan. + The type field will default to 3 (Any) and the keep field will default + to 0 (Discard). + + Examples: + 1) Perform a passive scan on all channels for 20 ms per channel: + echo "dur=20" > setuserscan + + 2) Perform an active scan for a specific SSID: + echo "ssid="TestAP"" > setuserscan + + 3) Scan all available channels (B/G, A bands) for a specific BSSID, keep + the current scan table intact, update existing or append new scan data: + echo "bssid=00:50:43:20:12:82 keep=1" > setuserscan + + 4) Scan for all infrastructure networks. + Keep the previous scan table intact. Update any duplicate BSSID/SSID + matches with the new scan data: + echo "type=1 keep=1" > setuserscan + + All entries in the scan table (not just the new scan data when keep=1) + will be displayed upon completion by use of the getscantable ioctl. + +hostsleep + This command is used to enable/disable host sleep. + Note: Host sleep parameters should be configured using + "ethtool -s ethX wol X" command before enabling host sleep. + + Path: /sys/kernel/debug/libertas_wireless/ethX/ + + Usage: + cat hostsleep: reads the current hostsleep state + echo "1" > hostsleep : enable host sleep. + echo "0" > hostsleep : disable host sleep + diff --git a/drivers/net/wireless/marvell/libertas/cfg.c b/drivers/net/wireless/marvell/libertas/cfg.c new file mode 100644 index 000000000000..8317afd065b4 --- /dev/null +++ b/drivers/net/wireless/marvell/libertas/cfg.c @@ -0,0 +1,2215 @@ +/* + * Implement cfg80211 ("iw") support. + * + * Copyright (C) 2009 M&N Solutions GmbH, 61191 Rosbach, Germany + * Holger Schurig <hs4233@mail.mn-solutions.de> + * + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/hardirq.h> +#include <linux/sched.h> +#include <linux/wait.h> +#include <linux/slab.h> +#include <linux/ieee80211.h> +#include <net/cfg80211.h> +#include <asm/unaligned.h> + +#include "decl.h" +#include "cfg.h" +#include "cmd.h" +#include "mesh.h" + + +#define CHAN2G(_channel, _freq, _flags) { \ + .band = IEEE80211_BAND_2GHZ, \ + .center_freq = (_freq), \ + .hw_value = (_channel), \ + .flags = (_flags), \ + .max_antenna_gain = 0, \ + .max_power = 30, \ +} + +static struct ieee80211_channel lbs_2ghz_channels[] = { + CHAN2G(1, 2412, 0), + CHAN2G(2, 2417, 0), + CHAN2G(3, 2422, 0), + CHAN2G(4, 2427, 0), + CHAN2G(5, 2432, 0), + CHAN2G(6, 2437, 0), + CHAN2G(7, 2442, 0), + CHAN2G(8, 2447, 0), + CHAN2G(9, 2452, 0), + CHAN2G(10, 2457, 0), + CHAN2G(11, 2462, 0), + CHAN2G(12, 2467, 0), + CHAN2G(13, 2472, 0), + CHAN2G(14, 2484, 0), +}; + +#define RATETAB_ENT(_rate, _hw_value, _flags) { \ + .bitrate = (_rate), \ + .hw_value = (_hw_value), \ + .flags = (_flags), \ +} + + +/* Table 6 in section 3.2.1.1 */ +static struct ieee80211_rate lbs_rates[] = { + RATETAB_ENT(10, 0, 0), + RATETAB_ENT(20, 1, 0), + RATETAB_ENT(55, 2, 0), + RATETAB_ENT(110, 3, 0), + RATETAB_ENT(60, 9, 0), + RATETAB_ENT(90, 6, 0), + RATETAB_ENT(120, 7, 0), + RATETAB_ENT(180, 8, 0), + RATETAB_ENT(240, 9, 0), + RATETAB_ENT(360, 10, 0), + RATETAB_ENT(480, 11, 0), + RATETAB_ENT(540, 12, 0), +}; + +static struct ieee80211_supported_band lbs_band_2ghz = { + .channels = lbs_2ghz_channels, + .n_channels = ARRAY_SIZE(lbs_2ghz_channels), + .bitrates = lbs_rates, + .n_bitrates = ARRAY_SIZE(lbs_rates), +}; + + +static const u32 cipher_suites[] = { + WLAN_CIPHER_SUITE_WEP40, + WLAN_CIPHER_SUITE_WEP104, + WLAN_CIPHER_SUITE_TKIP, + WLAN_CIPHER_SUITE_CCMP, +}; + +/* Time to stay on the channel */ +#define LBS_DWELL_PASSIVE 100 +#define LBS_DWELL_ACTIVE 40 + + +/*************************************************************************** + * Misc utility functions + * + * TLVs are Marvell specific. They are very similar to IEs, they have the + * same structure: type, length, data*. The only difference: for IEs, the + * type and length are u8, but for TLVs they're __le16. + */ + +/* + * Convert NL80211's auth_type to the one from Libertas, see chapter 5.9.1 + * in the firmware spec + */ +static int lbs_auth_to_authtype(enum nl80211_auth_type auth_type) +{ + int ret = -ENOTSUPP; + + switch (auth_type) { + case NL80211_AUTHTYPE_OPEN_SYSTEM: + case NL80211_AUTHTYPE_SHARED_KEY: + ret = auth_type; + break; + case NL80211_AUTHTYPE_AUTOMATIC: + ret = NL80211_AUTHTYPE_OPEN_SYSTEM; + break; + case NL80211_AUTHTYPE_NETWORK_EAP: + ret = 0x80; + break; + default: + /* silence compiler */ + break; + } + return ret; +} + + +/* + * Various firmware commands need the list of supported rates, but with + * the hight-bit set for basic rates + */ +static int lbs_add_rates(u8 *rates) +{ + size_t i; + + for (i = 0; i < ARRAY_SIZE(lbs_rates); i++) { + u8 rate = lbs_rates[i].bitrate / 5; + if (rate == 0x02 || rate == 0x04 || + rate == 0x0b || rate == 0x16) + rate |= 0x80; + rates[i] = rate; + } + return ARRAY_SIZE(lbs_rates); +} + + +/*************************************************************************** + * TLV utility functions + * + * TLVs are Marvell specific. They are very similar to IEs, they have the + * same structure: type, length, data*. The only difference: for IEs, the + * type and length are u8, but for TLVs they're __le16. + */ + + +/* + * Add ssid TLV + */ +#define LBS_MAX_SSID_TLV_SIZE \ + (sizeof(struct mrvl_ie_header) \ + + IEEE80211_MAX_SSID_LEN) + +static int lbs_add_ssid_tlv(u8 *tlv, const u8 *ssid, int ssid_len) +{ + struct mrvl_ie_ssid_param_set *ssid_tlv = (void *)tlv; + + /* + * TLV-ID SSID 00 00 + * length 06 00 + * ssid 4d 4e 54 45 53 54 + */ + ssid_tlv->header.type = cpu_to_le16(TLV_TYPE_SSID); + ssid_tlv->header.len = cpu_to_le16(ssid_len); + memcpy(ssid_tlv->ssid, ssid, ssid_len); + return sizeof(ssid_tlv->header) + ssid_len; +} + + +/* + * Add channel list TLV (section 8.4.2) + * + * Actual channel data comes from priv->wdev->wiphy->channels. + */ +#define LBS_MAX_CHANNEL_LIST_TLV_SIZE \ + (sizeof(struct mrvl_ie_header) \ + + (LBS_SCAN_BEFORE_NAP * sizeof(struct chanscanparamset))) + +static int lbs_add_channel_list_tlv(struct lbs_private *priv, u8 *tlv, + int last_channel, int active_scan) +{ + int chanscanparamsize = sizeof(struct chanscanparamset) * + (last_channel - priv->scan_channel); + + struct mrvl_ie_header *header = (void *) tlv; + + /* + * TLV-ID CHANLIST 01 01 + * length 0e 00 + * channel 00 01 00 00 00 64 00 + * radio type 00 + * channel 01 + * scan type 00 + * min scan time 00 00 + * max scan time 64 00 + * channel 2 00 02 00 00 00 64 00 + * + */ + + header->type = cpu_to_le16(TLV_TYPE_CHANLIST); + header->len = cpu_to_le16(chanscanparamsize); + tlv += sizeof(struct mrvl_ie_header); + + /* lbs_deb_scan("scan: channels %d to %d\n", priv->scan_channel, + last_channel); */ + memset(tlv, 0, chanscanparamsize); + + while (priv->scan_channel < last_channel) { + struct chanscanparamset *param = (void *) tlv; + + param->radiotype = CMD_SCAN_RADIO_TYPE_BG; + param->channumber = + priv->scan_req->channels[priv->scan_channel]->hw_value; + if (active_scan) { + param->maxscantime = cpu_to_le16(LBS_DWELL_ACTIVE); + } else { + param->chanscanmode.passivescan = 1; + param->maxscantime = cpu_to_le16(LBS_DWELL_PASSIVE); + } + tlv += sizeof(struct chanscanparamset); + priv->scan_channel++; + } + return sizeof(struct mrvl_ie_header) + chanscanparamsize; +} + + +/* + * Add rates TLV + * + * The rates are in lbs_bg_rates[], but for the 802.11b + * rates the high bit is set. We add this TLV only because + * there's a firmware which otherwise doesn't report all + * APs in range. + */ +#define LBS_MAX_RATES_TLV_SIZE \ + (sizeof(struct mrvl_ie_header) \ + + (ARRAY_SIZE(lbs_rates))) + +/* Adds a TLV with all rates the hardware supports */ +static int lbs_add_supported_rates_tlv(u8 *tlv) +{ + size_t i; + struct mrvl_ie_rates_param_set *rate_tlv = (void *)tlv; + + /* + * TLV-ID RATES 01 00 + * length 0e 00 + * rates 82 84 8b 96 0c 12 18 24 30 48 60 6c + */ + rate_tlv->header.type = cpu_to_le16(TLV_TYPE_RATES); + tlv += sizeof(rate_tlv->header); + i = lbs_add_rates(tlv); + tlv += i; + rate_tlv->header.len = cpu_to_le16(i); + return sizeof(rate_tlv->header) + i; +} + +/* Add common rates from a TLV and return the new end of the TLV */ +static u8 * +add_ie_rates(u8 *tlv, const u8 *ie, int *nrates) +{ + int hw, ap, ap_max = ie[1]; + u8 hw_rate; + + /* Advance past IE header */ + ie += 2; + + lbs_deb_hex(LBS_DEB_ASSOC, "AP IE Rates", (u8 *) ie, ap_max); + + for (hw = 0; hw < ARRAY_SIZE(lbs_rates); hw++) { + hw_rate = lbs_rates[hw].bitrate / 5; + for (ap = 0; ap < ap_max; ap++) { + if (hw_rate == (ie[ap] & 0x7f)) { + *tlv++ = ie[ap]; + *nrates = *nrates + 1; + } + } + } + return tlv; +} + +/* + * Adds a TLV with all rates the hardware *and* BSS supports. + */ +static int lbs_add_common_rates_tlv(u8 *tlv, struct cfg80211_bss *bss) +{ + struct mrvl_ie_rates_param_set *rate_tlv = (void *)tlv; + const u8 *rates_eid, *ext_rates_eid; + int n = 0; + + rcu_read_lock(); + rates_eid = ieee80211_bss_get_ie(bss, WLAN_EID_SUPP_RATES); + ext_rates_eid = ieee80211_bss_get_ie(bss, WLAN_EID_EXT_SUPP_RATES); + + /* + * 01 00 TLV_TYPE_RATES + * 04 00 len + * 82 84 8b 96 rates + */ + rate_tlv->header.type = cpu_to_le16(TLV_TYPE_RATES); + tlv += sizeof(rate_tlv->header); + + /* Add basic rates */ + if (rates_eid) { + tlv = add_ie_rates(tlv, rates_eid, &n); + + /* Add extended rates, if any */ + if (ext_rates_eid) + tlv = add_ie_rates(tlv, ext_rates_eid, &n); + } else { + lbs_deb_assoc("assoc: bss had no basic rate IE\n"); + /* Fallback: add basic 802.11b rates */ + *tlv++ = 0x82; + *tlv++ = 0x84; + *tlv++ = 0x8b; + *tlv++ = 0x96; + n = 4; + } + rcu_read_unlock(); + + rate_tlv->header.len = cpu_to_le16(n); + return sizeof(rate_tlv->header) + n; +} + + +/* + * Add auth type TLV. + * + * This is only needed for newer firmware (V9 and up). + */ +#define LBS_MAX_AUTH_TYPE_TLV_SIZE \ + sizeof(struct mrvl_ie_auth_type) + +static int lbs_add_auth_type_tlv(u8 *tlv, enum nl80211_auth_type auth_type) +{ + struct mrvl_ie_auth_type *auth = (void *) tlv; + + /* + * 1f 01 TLV_TYPE_AUTH_TYPE + * 01 00 len + * 01 auth type + */ + auth->header.type = cpu_to_le16(TLV_TYPE_AUTH_TYPE); + auth->header.len = cpu_to_le16(sizeof(*auth)-sizeof(auth->header)); + auth->auth = cpu_to_le16(lbs_auth_to_authtype(auth_type)); + return sizeof(*auth); +} + + +/* + * Add channel (phy ds) TLV + */ +#define LBS_MAX_CHANNEL_TLV_SIZE \ + sizeof(struct mrvl_ie_header) + +static int lbs_add_channel_tlv(u8 *tlv, u8 channel) +{ + struct mrvl_ie_ds_param_set *ds = (void *) tlv; + + /* + * 03 00 TLV_TYPE_PHY_DS + * 01 00 len + * 06 channel + */ + ds->header.type = cpu_to_le16(TLV_TYPE_PHY_DS); + ds->header.len = cpu_to_le16(sizeof(*ds)-sizeof(ds->header)); + ds->channel = channel; + return sizeof(*ds); +} + + +/* + * Add (empty) CF param TLV of the form: + */ +#define LBS_MAX_CF_PARAM_TLV_SIZE \ + sizeof(struct mrvl_ie_header) + +static int lbs_add_cf_param_tlv(u8 *tlv) +{ + struct mrvl_ie_cf_param_set *cf = (void *)tlv; + + /* + * 04 00 TLV_TYPE_CF + * 06 00 len + * 00 cfpcnt + * 00 cfpperiod + * 00 00 cfpmaxduration + * 00 00 cfpdurationremaining + */ + cf->header.type = cpu_to_le16(TLV_TYPE_CF); + cf->header.len = cpu_to_le16(sizeof(*cf)-sizeof(cf->header)); + return sizeof(*cf); +} + +/* + * Add WPA TLV + */ +#define LBS_MAX_WPA_TLV_SIZE \ + (sizeof(struct mrvl_ie_header) \ + + 128 /* TODO: I guessed the size */) + +static int lbs_add_wpa_tlv(u8 *tlv, const u8 *ie, u8 ie_len) +{ + size_t tlv_len; + + /* + * We need just convert an IE to an TLV. IEs use u8 for the header, + * u8 type + * u8 len + * u8[] data + * but TLVs use __le16 instead: + * __le16 type + * __le16 len + * u8[] data + */ + *tlv++ = *ie++; + *tlv++ = 0; + tlv_len = *tlv++ = *ie++; + *tlv++ = 0; + while (tlv_len--) + *tlv++ = *ie++; + /* the TLV is two bytes larger than the IE */ + return ie_len + 2; +} + +/* + * Set Channel + */ + +static int lbs_cfg_set_monitor_channel(struct wiphy *wiphy, + struct cfg80211_chan_def *chandef) +{ + struct lbs_private *priv = wiphy_priv(wiphy); + int ret = -ENOTSUPP; + + lbs_deb_enter_args(LBS_DEB_CFG80211, "freq %d, type %d", + chandef->chan->center_freq, + cfg80211_get_chandef_type(chandef)); + + if (cfg80211_get_chandef_type(chandef) != NL80211_CHAN_NO_HT) + goto out; + + ret = lbs_set_channel(priv, chandef->chan->hw_value); + + out: + lbs_deb_leave_args(LBS_DEB_CFG80211, "ret %d", ret); + return ret; +} + +static int lbs_cfg_set_mesh_channel(struct wiphy *wiphy, + struct net_device *netdev, + struct ieee80211_channel *channel) +{ + struct lbs_private *priv = wiphy_priv(wiphy); + int ret = -ENOTSUPP; + + lbs_deb_enter_args(LBS_DEB_CFG80211, "iface %s freq %d", + netdev_name(netdev), channel->center_freq); + + if (netdev != priv->mesh_dev) + goto out; + + ret = lbs_mesh_set_channel(priv, channel->hw_value); + + out: + lbs_deb_leave_args(LBS_DEB_CFG80211, "ret %d", ret); + return ret; +} + + + +/* + * Scanning + */ + +/* + * When scanning, the firmware doesn't send a nul packet with the power-safe + * bit to the AP. So we cannot stay away from our current channel too long, + * otherwise we loose data. So take a "nap" while scanning every other + * while. + */ +#define LBS_SCAN_BEFORE_NAP 4 + + +/* + * When the firmware reports back a scan-result, it gives us an "u8 rssi", + * which isn't really an RSSI, as it becomes larger when moving away from + * the AP. Anyway, we need to convert that into mBm. + */ +#define LBS_SCAN_RSSI_TO_MBM(rssi) \ + ((-(int)rssi + 3)*100) + +static int lbs_ret_scan(struct lbs_private *priv, unsigned long dummy, + struct cmd_header *resp) +{ + struct cfg80211_bss *bss; + struct cmd_ds_802_11_scan_rsp *scanresp = (void *)resp; + int bsssize; + const u8 *pos; + const u8 *tsfd |