diff options
Diffstat (limited to 'drivers/net/wireless/libertas')
21 files changed, 2239 insertions, 6726 deletions
diff --git a/drivers/net/wireless/libertas/Makefile b/drivers/net/wireless/libertas/Makefile index 45e870e33117..f7d01bfa2e4a 100644 --- a/drivers/net/wireless/libertas/Makefile +++ b/drivers/net/wireless/libertas/Makefile @@ -1,4 +1,3 @@ -libertas-y += assoc.o libertas-y += cfg.o libertas-y += cmd.o libertas-y += cmdresp.o @@ -6,9 +5,7 @@ libertas-y += debugfs.o libertas-y += ethtool.o libertas-y += main.o libertas-y += rx.o -libertas-y += scan.o libertas-y += tx.o -libertas-y += wext.o libertas-$(CONFIG_LIBERTAS_MESH) += mesh.o usb8xxx-objs += if_usb.o diff --git a/drivers/net/wireless/libertas/assoc.c b/drivers/net/wireless/libertas/assoc.c deleted file mode 100644 index aa06070e5eab..000000000000 --- a/drivers/net/wireless/libertas/assoc.c +++ /dev/null @@ -1,2264 +0,0 @@ -/* Copyright (C) 2006, Red Hat, Inc. */ - -#include <linux/types.h> -#include <linux/etherdevice.h> -#include <linux/ieee80211.h> -#include <linux/if_arp.h> -#include <linux/slab.h> -#include <net/lib80211.h> - -#include "assoc.h" -#include "decl.h" -#include "host.h" -#include "scan.h" -#include "cmd.h" - -static const u8 bssid_any[ETH_ALEN] __attribute__ ((aligned (2))) = - { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF }; -static const u8 bssid_off[ETH_ALEN] __attribute__ ((aligned (2))) = - { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; - -/* The firmware needs the following bits masked out of the beacon-derived - * capability field when associating/joining to a BSS: - * 9 (QoS), 11 (APSD), 12 (unused), 14 (unused), 15 (unused) - */ -#define CAPINFO_MASK (~(0xda00)) - -/** - * 802.11b/g supported bitrates (in 500Kb/s units) - */ -u8 lbs_bg_rates[MAX_RATES] = - { 0x02, 0x04, 0x0b, 0x16, 0x0c, 0x12, 0x18, 0x24, 0x30, 0x48, 0x60, 0x6c, -0x00, 0x00 }; - - -static int assoc_helper_wep_keys(struct lbs_private *priv, - struct assoc_request *assoc_req); - -/** - * @brief This function finds common rates between rates and card rates. - * - * It will fill common rates in rates as output if found. - * - * NOTE: Setting the MSB of the basic rates need to be taken - * care, either before or after calling this function - * - * @param priv A pointer to struct lbs_private structure - * @param rates the buffer which keeps input and output - * @param rates_size the size of rates buffer; new size of buffer on return, - * which will be less than or equal to original rates_size - * - * @return 0 on success, or -1 on error - */ -static int get_common_rates(struct lbs_private *priv, - u8 *rates, - u16 *rates_size) -{ - int i, j; - u8 intersection[MAX_RATES]; - u16 intersection_size; - u16 num_rates = 0; - - intersection_size = min_t(u16, *rates_size, ARRAY_SIZE(intersection)); - - /* Allow each rate from 'rates' that is supported by the hardware */ - for (i = 0; i < ARRAY_SIZE(lbs_bg_rates) && lbs_bg_rates[i]; i++) { - for (j = 0; j < intersection_size && rates[j]; j++) { - if (rates[j] == lbs_bg_rates[i]) - intersection[num_rates++] = rates[j]; - } - } - - lbs_deb_hex(LBS_DEB_JOIN, "AP rates ", rates, *rates_size); - lbs_deb_hex(LBS_DEB_JOIN, "card rates ", lbs_bg_rates, - ARRAY_SIZE(lbs_bg_rates)); - lbs_deb_hex(LBS_DEB_JOIN, "common rates", intersection, num_rates); - lbs_deb_join("TX data rate 0x%02x\n", priv->cur_rate); - - if (!priv->enablehwauto) { - for (i = 0; i < num_rates; i++) { - if (intersection[i] == priv->cur_rate) - goto done; - } - lbs_pr_alert("Previously set fixed data rate %#x isn't " - "compatible with the network.\n", priv->cur_rate); - return -1; - } - -done: - memset(rates, 0, *rates_size); - *rates_size = num_rates; - memcpy(rates, intersection, num_rates); - return 0; -} - - -/** - * @brief Sets the MSB on basic rates as the firmware requires - * - * Scan through an array and set the MSB for basic data rates. - * - * @param rates buffer of data rates - * @param len size of buffer - */ -static void lbs_set_basic_rate_flags(u8 *rates, size_t len) -{ - int i; - - for (i = 0; i < len; i++) { - if (rates[i] == 0x02 || rates[i] == 0x04 || - rates[i] == 0x0b || rates[i] == 0x16) - rates[i] |= 0x80; - } -} - - -static u8 iw_auth_to_ieee_auth(u8 auth) -{ - if (auth == IW_AUTH_ALG_OPEN_SYSTEM) - return 0x00; - else if (auth == IW_AUTH_ALG_SHARED_KEY) - return 0x01; - else if (auth == IW_AUTH_ALG_LEAP) - return 0x80; - - lbs_deb_join("%s: invalid auth alg 0x%X\n", __func__, auth); - return 0; -} - -/** - * @brief This function prepares the authenticate command. AUTHENTICATE only - * sets the authentication suite for future associations, as the firmware - * handles authentication internally during the ASSOCIATE command. - * - * @param priv A pointer to struct lbs_private structure - * @param bssid The peer BSSID with which to authenticate - * @param auth The authentication mode to use (from wireless.h) - * - * @return 0 or -1 - */ -static int lbs_set_authentication(struct lbs_private *priv, u8 bssid[6], u8 auth) -{ - struct cmd_ds_802_11_authenticate cmd; - int ret = -1; - - lbs_deb_enter(LBS_DEB_JOIN); - - cmd.hdr.size = cpu_to_le16(sizeof(cmd)); - memcpy(cmd.bssid, bssid, ETH_ALEN); - - cmd.authtype = iw_auth_to_ieee_auth(auth); - - lbs_deb_join("AUTH_CMD: BSSID %pM, auth 0x%x\n", bssid, cmd.authtype); - - ret = lbs_cmd_with_response(priv, CMD_802_11_AUTHENTICATE, &cmd); - - lbs_deb_leave_args(LBS_DEB_JOIN, "ret %d", ret); - return ret; -} - - -int lbs_cmd_802_11_set_wep(struct lbs_private *priv, uint16_t cmd_action, - struct assoc_request *assoc) -{ - struct cmd_ds_802_11_set_wep cmd; - int ret = 0; - - lbs_deb_enter(LBS_DEB_CMD); - - memset(&cmd, 0, sizeof(cmd)); - cmd.hdr.command = cpu_to_le16(CMD_802_11_SET_WEP); - cmd.hdr.size = cpu_to_le16(sizeof(cmd)); - - cmd.action = cpu_to_le16(cmd_action); - - if (cmd_action == CMD_ACT_ADD) { - int i; - - /* default tx key index */ - cmd.keyindex = cpu_to_le16(assoc->wep_tx_keyidx & - CMD_WEP_KEY_INDEX_MASK); - - /* Copy key types and material to host command structure */ - for (i = 0; i < 4; i++) { - struct enc_key *pkey = &assoc->wep_keys[i]; - - switch (pkey->len) { - case KEY_LEN_WEP_40: - cmd.keytype[i] = CMD_TYPE_WEP_40_BIT; - memmove(cmd.keymaterial[i], pkey->key, pkey->len); - lbs_deb_cmd("SET_WEP: add key %d (40 bit)\n", i); - break; - case KEY_LEN_WEP_104: - cmd.keytype[i] = CMD_TYPE_WEP_104_BIT; - memmove(cmd.keymaterial[i], pkey->key, pkey->len); - lbs_deb_cmd("SET_WEP: add key %d (104 bit)\n", i); - break; - case 0: - break; - default: - lbs_deb_cmd("SET_WEP: invalid key %d, length %d\n", - i, pkey->len); - ret = -1; - goto done; - break; - } - } - } else if (cmd_action == CMD_ACT_REMOVE) { - /* ACT_REMOVE clears _all_ WEP keys */ - - /* default tx key index */ - cmd.keyindex = cpu_to_le16(priv->wep_tx_keyidx & - CMD_WEP_KEY_INDEX_MASK); - lbs_deb_cmd("SET_WEP: remove key %d\n", priv->wep_tx_keyidx); - } - - ret = lbs_cmd_with_response(priv, CMD_802_11_SET_WEP, &cmd); -done: - lbs_deb_leave_args(LBS_DEB_CMD, "ret %d", ret); - return ret; -} - -int lbs_cmd_802_11_enable_rsn(struct lbs_private *priv, uint16_t cmd_action, - uint16_t *enable) -{ - struct cmd_ds_802_11_enable_rsn cmd; - int ret; - - lbs_deb_enter(LBS_DEB_CMD); - - cmd.hdr.size = cpu_to_le16(sizeof(cmd)); - cmd.action = cpu_to_le16(cmd_action); - - if (cmd_action == CMD_ACT_GET) - cmd.enable = 0; - else { - if (*enable) - cmd.enable = cpu_to_le16(CMD_ENABLE_RSN); - else - cmd.enable = cpu_to_le16(CMD_DISABLE_RSN); - lbs_deb_cmd("ENABLE_RSN: %d\n", *enable); - } - - ret = lbs_cmd_with_response(priv, CMD_802_11_ENABLE_RSN, &cmd); - if (!ret && cmd_action == CMD_ACT_GET) - *enable = le16_to_cpu(cmd.enable); - - lbs_deb_leave_args(LBS_DEB_CMD, "ret %d", ret); - return ret; -} - -static void set_one_wpa_key(struct MrvlIEtype_keyParamSet *keyparam, - struct enc_key *key) -{ - lbs_deb_enter(LBS_DEB_CMD); - - if (key->flags & KEY_INFO_WPA_ENABLED) - keyparam->keyinfo |= cpu_to_le16(KEY_INFO_WPA_ENABLED); - if (key->flags & KEY_INFO_WPA_UNICAST) - keyparam->keyinfo |= cpu_to_le16(KEY_INFO_WPA_UNICAST); - if (key->flags & KEY_INFO_WPA_MCAST) - keyparam->keyinfo |= cpu_to_le16(KEY_INFO_WPA_MCAST); - - keyparam->type = cpu_to_le16(TLV_TYPE_KEY_MATERIAL); - keyparam->keytypeid = cpu_to_le16(key->type); - keyparam->keylen = cpu_to_le16(key->len); - memcpy(keyparam->key, key->key, key->len); - - /* Length field doesn't include the {type,length} header */ - keyparam->length = cpu_to_le16(sizeof(*keyparam) - 4); - lbs_deb_leave(LBS_DEB_CMD); -} - -int lbs_cmd_802_11_key_material(struct lbs_private *priv, uint16_t cmd_action, - struct assoc_request *assoc) -{ - struct cmd_ds_802_11_key_material cmd; - int ret = 0; - int index = 0; - - lbs_deb_enter(LBS_DEB_CMD); - - cmd.action = cpu_to_le16(cmd_action); - cmd.hdr.size = cpu_to_le16(sizeof(cmd)); - - if (cmd_action == CMD_ACT_GET) { - cmd.hdr.size = cpu_to_le16(sizeof(struct cmd_header) + 2); - } else { - memset(cmd.keyParamSet, 0, sizeof(cmd.keyParamSet)); - - if (test_bit(ASSOC_FLAG_WPA_UCAST_KEY, &assoc->flags)) { - set_one_wpa_key(&cmd.keyParamSet[index], - &assoc->wpa_unicast_key); - index++; - } - - if (test_bit(ASSOC_FLAG_WPA_MCAST_KEY, &assoc->flags)) { - set_one_wpa_key(&cmd.keyParamSet[index], - &assoc->wpa_mcast_key); - index++; - } - - /* The common header and as many keys as we included */ - cmd.hdr.size = cpu_to_le16(offsetof(typeof(cmd), - keyParamSet[index])); - } - ret = lbs_cmd_with_response(priv, CMD_802_11_KEY_MATERIAL, &cmd); - /* Copy the returned key to driver private data */ - if (!ret && cmd_action == CMD_ACT_GET) { - void *buf_ptr = cmd.keyParamSet; - void *resp_end = &(&cmd)[1]; - - while (buf_ptr < resp_end) { - struct MrvlIEtype_keyParamSet *keyparam = buf_ptr; - struct enc_key *key; - uint16_t param_set_len = le16_to_cpu(keyparam->length); - uint16_t key_len = le16_to_cpu(keyparam->keylen); - uint16_t key_flags = le16_to_cpu(keyparam->keyinfo); - uint16_t key_type = le16_to_cpu(keyparam->keytypeid); - void *end; - - end = (void *)keyparam + sizeof(keyparam->type) - + sizeof(keyparam->length) + param_set_len; - - /* Make sure we don't access past the end of the IEs */ - if (end > resp_end) - break; - - if (key_flags & KEY_INFO_WPA_UNICAST) - key = &priv->wpa_unicast_key; - else if (key_flags & KEY_INFO_WPA_MCAST) - key = &priv->wpa_mcast_key; - else - break; - - /* Copy returned key into driver */ - memset(key, 0, sizeof(struct enc_key)); - if (key_len > sizeof(key->key)) - break; - key->type = key_type; - key->flags = key_flags; - key->len = key_len; - memcpy(key->key, keyparam->key, key->len); - - buf_ptr = end + 1; - } - } - - lbs_deb_leave_args(LBS_DEB_CMD, "ret %d", ret); - return ret; -} - -static __le16 lbs_rate_to_fw_bitmap(int rate, int lower_rates_ok) -{ -/* Bit Rate -* 15:13 Reserved -* 12 54 Mbps -* 11 48 Mbps -* 10 36 Mbps -* 9 24 Mbps -* 8 18 Mbps -* 7 12 Mbps -* 6 9 Mbps -* 5 6 Mbps -* 4 Reserved -* 3 11 Mbps -* 2 5.5 Mbps -* 1 2 Mbps -* 0 1 Mbps -**/ - - uint16_t ratemask; - int i = lbs_data_rate_to_fw_index(rate); - if (lower_rates_ok) - ratemask = (0x1fef >> (12 - i)); - else - ratemask = (1 << i); - return cpu_to_le16(ratemask); -} - -int lbs_cmd_802_11_rate_adapt_rateset(struct lbs_private *priv, - uint16_t cmd_action) -{ - struct cmd_ds_802_11_rate_adapt_rateset cmd; - int ret; - - lbs_deb_enter(LBS_DEB_CMD); - - if (!priv->cur_rate && !priv->enablehwauto) - return -EINVAL; - - cmd.hdr.size = cpu_to_le16(sizeof(cmd)); - - cmd.action = cpu_to_le16(cmd_action); - cmd.enablehwauto = cpu_to_le16(priv->enablehwauto); - cmd.bitmap = lbs_rate_to_fw_bitmap(priv->cur_rate, priv->enablehwauto); - ret = lbs_cmd_with_response(priv, CMD_802_11_RATE_ADAPT_RATESET, &cmd); - if (!ret && cmd_action == CMD_ACT_GET) - priv->enablehwauto = le16_to_cpu(cmd.enablehwauto); - - lbs_deb_leave_args(LBS_DEB_CMD, "ret %d", ret); - return ret; -} - -/** - * @brief Set the data rate - * - * @param priv A pointer to struct lbs_private structure - * @param rate The desired data rate, or 0 to clear a locked rate - * - * @return 0 on success, error on failure - */ -int lbs_set_data_rate(struct lbs_private *priv, u8 rate) -{ - struct cmd_ds_802_11_data_rate cmd; - int ret = 0; - - lbs_deb_enter(LBS_DEB_CMD); - - memset(&cmd, 0, sizeof(cmd)); - cmd.hdr.size = cpu_to_le16(sizeof(cmd)); - - if (rate > 0) { - cmd.action = cpu_to_le16(CMD_ACT_SET_TX_FIX_RATE); - cmd.rates[0] = lbs_data_rate_to_fw_index(rate); - if (cmd.rates[0] == 0) { - lbs_deb_cmd("DATA_RATE: invalid requested rate of" - " 0x%02X\n", rate); - ret = 0; - goto out; - } - lbs_deb_cmd("DATA_RATE: set fixed 0x%02X\n", cmd.rates[0]); - } else { - cmd.action = cpu_to_le16(CMD_ACT_SET_TX_AUTO); - lbs_deb_cmd("DATA_RATE: setting auto\n"); - } - - ret = lbs_cmd_with_response(priv, CMD_802_11_DATA_RATE, &cmd); - if (ret) - goto out; - - lbs_deb_hex(LBS_DEB_CMD, "DATA_RATE_RESP", (u8 *) &cmd, sizeof(cmd)); - - /* FIXME: get actual rates FW can do if this command actually returns - * all data rates supported. - */ - priv->cur_rate = lbs_fw_index_to_data_rate(cmd.rates[0]); - lbs_deb_cmd("DATA_RATE: current rate is 0x%02x\n", priv->cur_rate); - -out: - lbs_deb_leave_args(LBS_DEB_CMD, "ret %d", ret); - return ret; -} - - -int lbs_cmd_802_11_rssi(struct lbs_private *priv, - struct cmd_ds_command *cmd) -{ - - lbs_deb_enter(LBS_DEB_CMD); - cmd->command = cpu_to_le16(CMD_802_11_RSSI); - cmd->size = cpu_to_le16(sizeof(struct cmd_ds_802_11_rssi) + - sizeof(struct cmd_header)); - cmd->params.rssi.N = cpu_to_le16(DEFAULT_BCN_AVG_FACTOR); - - /* reset Beacon SNR/NF/RSSI values */ - priv->SNR[TYPE_BEACON][TYPE_NOAVG] = 0; - priv->SNR[TYPE_BEACON][TYPE_AVG] = 0; - priv->NF[TYPE_BEACON][TYPE_NOAVG] = 0; - priv->NF[TYPE_BEACON][TYPE_AVG] = 0; - priv->RSSI[TYPE_BEACON][TYPE_NOAVG] = 0; - priv->RSSI[TYPE_BEACON][TYPE_AVG] = 0; - - lbs_deb_leave(LBS_DEB_CMD); - return 0; -} - -int lbs_ret_802_11_rssi(struct lbs_private *priv, - struct cmd_ds_command *resp) -{ - struct cmd_ds_802_11_rssi_rsp *rssirsp = &resp->params.rssirsp; - - lbs_deb_enter(LBS_DEB_CMD); - - /* store the non average value */ - priv->SNR[TYPE_BEACON][TYPE_NOAVG] = get_unaligned_le16(&rssirsp->SNR); - priv->NF[TYPE_BEACON][TYPE_NOAVG] = - get_unaligned_le16(&rssirsp->noisefloor); - - priv->SNR[TYPE_BEACON][TYPE_AVG] = get_unaligned_le16(&rssirsp->avgSNR); - priv->NF[TYPE_BEACON][TYPE_AVG] = - get_unaligned_le16(&rssirsp->avgnoisefloor); - - priv->RSSI[TYPE_BEACON][TYPE_NOAVG] = - CAL_RSSI(priv->SNR[TYPE_BEACON][TYPE_NOAVG], - priv->NF[TYPE_BEACON][TYPE_NOAVG]); - - priv->RSSI[TYPE_BEACON][TYPE_AVG] = - CAL_RSSI(priv->SNR[TYPE_BEACON][TYPE_AVG] / AVG_SCALE, - priv->NF[TYPE_BEACON][TYPE_AVG] / AVG_SCALE); - - lbs_deb_cmd("RSSI: beacon %d, avg %d\n", - priv->RSSI[TYPE_BEACON][TYPE_NOAVG], - priv->RSSI[TYPE_BEACON][TYPE_AVG]); - - lbs_deb_leave(LBS_DEB_CMD); - return 0; -} - - -int lbs_cmd_bcn_ctrl(struct lbs_private *priv, - struct cmd_ds_command *cmd, - u16 cmd_action) -{ - struct cmd_ds_802_11_beacon_control - *bcn_ctrl = &cmd->params.bcn_ctrl; - - lbs_deb_enter(LBS_DEB_CMD); - cmd->size = - cpu_to_le16(sizeof(struct cmd_ds_802_11_beacon_control) - + sizeof(struct cmd_header)); - cmd->command = cpu_to_le16(CMD_802_11_BEACON_CTRL); - - bcn_ctrl->action = cpu_to_le16(cmd_action); - bcn_ctrl->beacon_enable = cpu_to_le16(priv->beacon_enable); - bcn_ctrl->beacon_period = cpu_to_le16(priv->beacon_period); - - lbs_deb_leave(LBS_DEB_CMD); - return 0; -} - -int lbs_ret_802_11_bcn_ctrl(struct lbs_private *priv, - struct cmd_ds_command *resp) -{ - struct cmd_ds_802_11_beacon_control *bcn_ctrl = - &resp->params.bcn_ctrl; - - lbs_deb_enter(LBS_DEB_CMD); - - if (bcn_ctrl->action == CMD_ACT_GET) { - priv->beacon_enable = (u8) le16_to_cpu(bcn_ctrl->beacon_enable); - priv->beacon_period = le16_to_cpu(bcn_ctrl->beacon_period); - } - - lbs_deb_enter(LBS_DEB_CMD); - return 0; -} - - - -static int lbs_assoc_post(struct lbs_private *priv, - struct cmd_ds_802_11_associate_response *resp) -{ - int ret = 0; - union iwreq_data wrqu; - struct bss_descriptor *bss; - u16 status_code; - - lbs_deb_enter(LBS_DEB_ASSOC); - - if (!priv->in_progress_assoc_req) { - lbs_deb_assoc("ASSOC_RESP: no in-progress assoc request\n"); - ret = -1; - goto done; - } - bss = &priv->in_progress_assoc_req->bss; - - /* - * Older FW versions map the IEEE 802.11 Status Code in the association - * response to the following values returned in resp->statuscode: - * - * IEEE Status Code Marvell Status Code - * 0 -> 0x0000 ASSOC_RESULT_SUCCESS - * 13 -> 0x0004 ASSOC_RESULT_AUTH_REFUSED - * 14 -> 0x0004 ASSOC_RESULT_AUTH_REFUSED - * 15 -> 0x0004 ASSOC_RESULT_AUTH_REFUSED - * 16 -> 0x0004 ASSOC_RESULT_AUTH_REFUSED - * others -> 0x0003 ASSOC_RESULT_REFUSED - * - * Other response codes: - * 0x0001 -> ASSOC_RESULT_INVALID_PARAMETERS (unused) - * 0x0002 -> ASSOC_RESULT_TIMEOUT (internal timer expired waiting for - * association response from the AP) - */ - - status_code = le16_to_cpu(resp->statuscode); - if (priv->fwrelease < 0x09000000) { - switch (status_code) { - case 0x00: - break; - case 0x01: - lbs_deb_assoc("ASSOC_RESP: invalid parameters\n"); - break; - case 0x02: - lbs_deb_assoc("ASSOC_RESP: internal timer " - "expired while waiting for the AP\n"); - break; - case 0x03: - lbs_deb_assoc("ASSOC_RESP: association " - "refused by AP\n"); - break; - case 0x04: - lbs_deb_assoc("ASSOC_RESP: authentication " - "refused by AP\n"); - break; - default: - lbs_deb_assoc("ASSOC_RESP: failure reason 0x%02x " - " unknown\n", status_code); - break; - } - } else { - /* v9+ returns the AP's association response */ - lbs_deb_assoc("ASSOC_RESP: failure reason 0x%02x\n", status_code); - } - - if (status_code) { - lbs_mac_event_disconnected(priv); - ret = status_code; - goto done; - } - - lbs_deb_hex(LBS_DEB_ASSOC, "ASSOC_RESP", - (void *) (resp + sizeof (resp->hdr)), - le16_to_cpu(resp->hdr.size) - sizeof (resp->hdr)); - - /* Send a Media Connected event, according to the Spec */ - priv->connect_status = LBS_CONNECTED; - - /* Update current SSID and BSSID */ - memcpy(&priv->curbssparams.ssid, &bss->ssid, IEEE80211_MAX_SSID_LEN); - priv->curbssparams.ssid_len = bss->ssid_len; - memcpy(priv->curbssparams.bssid, bss->bssid, ETH_ALEN); - - priv->SNR[TYPE_RXPD][TYPE_AVG] = 0; - priv->NF[TYPE_RXPD][TYPE_AVG] = 0; - - memset(priv->rawSNR, 0x00, sizeof(priv->rawSNR)); - memset(priv->rawNF, 0x00, sizeof(priv->rawNF)); - priv->nextSNRNF = 0; - priv->numSNRNF = 0; - - netif_carrier_on(priv->dev); - if (!priv->tx_pending_len) - netif_wake_queue(priv->dev); - - memcpy(wrqu.ap_addr.sa_data, priv->curbssparams.bssid, ETH_ALEN); - wrqu.ap_addr.sa_family = ARPHRD_ETHER; - wireless_send_event(priv->dev, SIOCGIWAP, &wrqu, NULL); - -done: - lbs_deb_leave_args(LBS_DEB_ASSOC, "ret %d", ret); - return ret; -} - -/** - * @brief This function prepares an association-class command. - * - * @param priv A pointer to struct lbs_private structure - * @param assoc_req The association request describing the BSS to associate - * or reassociate with - * @param command The actual command, either CMD_802_11_ASSOCIATE or - * CMD_802_11_REASSOCIATE - * - * @return 0 or -1 - */ -static int lbs_associate(struct lbs_private *priv, - struct assoc_request *assoc_req, - u16 command) -{ - struct cmd_ds_802_11_associate cmd; - int ret = 0; - struct bss_descriptor *bss = &assoc_req->bss; - u8 *pos = &(cmd.iebuf[0]); - u16 tmpcap, tmplen, tmpauth; - struct mrvl_ie_ssid_param_set *ssid; - struct mrvl_ie_ds_param_set *ds; - struct mrvl_ie_cf_param_set *cf; - struct mrvl_ie_rates_param_set *rates; - struct mrvl_ie_rsn_param_set *rsn; - struct mrvl_ie_auth_type *auth; - - lbs_deb_enter(LBS_DEB_ASSOC); - - BUG_ON((command != CMD_802_11_ASSOCIATE) && - (command != CMD_802_11_REASSOCIATE)); - - memset(&cmd, 0, sizeof(cmd)); - cmd.hdr.command = cpu_to_le16(command); - - /* Fill in static fields */ - memcpy(cmd.bssid, bss->bssid, ETH_ALEN); - cmd.listeninterval = cpu_to_le16(MRVDRV_DEFAULT_LISTEN_INTERVAL); - - /* Capability info */ - tmpcap = (bss->capability & CAPINFO_MASK); - if (bss->mode == IW_MODE_INFRA) - tmpcap |= WLAN_CAPABILITY_ESS; - cmd.capability = cpu_to_le16(tmpcap); - lbs_deb_assoc("ASSOC_CMD: capability 0x%04x\n", tmpcap); - - /* SSID */ - ssid = (struct mrvl_ie_ssid_param_set *) pos; - ssid->header.type = cpu_to_le16(TLV_TYPE_SSID); - tmplen = bss->ssid_len; - ssid->header.len = cpu_to_le16(tmplen); - memcpy(ssid->ssid, bss->ssid, tmplen); - pos += sizeof(ssid->header) + tmplen; - - ds = (struct mrvl_ie_ds_param_set *) pos; - ds->header.type = cpu_to_le16(TLV_TYPE_PHY_DS); - ds->header.len = cpu_to_le16(1); - ds->channel = bss->phy.ds.channel; - pos += sizeof(ds->header) + 1; - - cf = (struct mrvl_ie_cf_param_set *) pos; - cf->header.type = cpu_to_le16(TLV_TYPE_CF); - tmplen = sizeof(*cf) - sizeof (cf->header); - cf->header.len = cpu_to_le16(tmplen); - /* IE payload should be zeroed, firmware fills it in for us */ - pos += sizeof(*cf); - - rates = (struct mrvl_ie_rates_param_set *) pos; - rates->header.type = cpu_to_le16(TLV_TYPE_RATES); - tmplen = min_t(u16, ARRAY_SIZE(bss->rates), MAX_RATES); - memcpy(&rates->rates, &bss->rates, tmplen); - if (get_common_rates(priv, rates->rates, &tmplen)) { - ret = -1; - goto done; - } - pos += sizeof(rates->header) + tmplen; - rates->header.len = cpu_to_le16(tmplen); - lbs_deb_assoc("ASSOC_CMD: num rates %u\n", tmplen); - - /* Copy the infra. association rates into Current BSS state structure */ - memset(&priv->curbssparams.rates, 0, sizeof(priv->curbssparams.rates)); - memcpy(&priv->curbssparams.rates, &rates->rates, tmplen); - - /* Set MSB on basic rates as the firmware requires, but _after_ - * copying to current bss rates. - */ - lbs_set_basic_rate_flags(rates->rates, tmplen); - - /* Firmware v9+ indicate authentication suites as a TLV */ - if (priv->fwrelease >= 0x09000000) { - auth = (struct mrvl_ie_auth_type *) pos; - auth->header.type = cpu_to_le16(TLV_TYPE_AUTH_TYPE); - auth->header.len = cpu_to_le16(2); - tmpauth = iw_auth_to_ieee_auth(priv->secinfo.auth_mode); - auth->auth = cpu_to_le16(tmpauth); - pos += sizeof(auth->header) + 2; - - lbs_deb_join("AUTH_CMD: BSSID %pM, auth 0x%x\n", - bss->bssid, priv->secinfo.auth_mode); - } - - /* WPA/WPA2 IEs */ - if (assoc_req->secinfo.WPAenabled || assoc_req->secinfo.WPA2enabled) { - rsn = (struct mrvl_ie_rsn_param_set *) pos; - /* WPA_IE or WPA2_IE */ - rsn->header.type = cpu_to_le16((u16) assoc_req->wpa_ie[0]); - tmplen = (u16) assoc_req->wpa_ie[1]; - rsn->header.len = cpu_to_le16(tmplen); - memcpy(rsn->rsnie, &assoc_req->wpa_ie[2], tmplen); - lbs_deb_hex(LBS_DEB_JOIN, "ASSOC_CMD: WPA/RSN IE", (u8 *) rsn, - sizeof(rsn->header) + tmplen); - pos += sizeof(rsn->header) + tmplen; - } - - cmd.hdr.size = cpu_to_le16((sizeof(cmd) - sizeof(cmd.iebuf)) + - (u16)(pos - (u8 *) &cmd.iebuf)); - - /* update curbssparams */ - priv->channel = bss->phy.ds.channel; - - ret = lbs_cmd_with_response(priv, command, &cmd); - if (ret == 0) { - ret = lbs_assoc_post(priv, - (struct cmd_ds_802_11_associate_response *) &cmd); - } - -done: - lbs_deb_leave_args(LBS_DEB_ASSOC, "ret %d", ret); - return ret; -} - -/** - * @brief Associate to a specific BSS discovered in a scan - * - * @param priv A pointer to struct lbs_private structure - * @param assoc_req The association request describing the BSS to associate with - * - * @return 0-success, otherwise fail - */ -static int lbs_try_associate(struct lbs_private *priv, - struct assoc_request *assoc_req) -{ - int ret; - u8 preamble = RADIO_PREAMBLE_LONG; - - lbs_deb_enter(LBS_DEB_ASSOC); - - /* FW v9 and higher indicate authentication suites as a TLV in the - * association command, not as a separate authentication command. - */ - if (priv->fwrelease < 0x09000000) { - ret = lbs_set_authentication(priv, assoc_req->bss.bssid, - priv->secinfo.auth_mode); - if (ret) - goto out; - } - - /* Use short preamble only when both the BSS and firmware support it */ - if (assoc_req->bss.capability & WLAN_CAPABILITY_SHORT_PREAMBLE) - preamble = RADIO_PREAMBLE_SHORT; - - ret = lbs_set_radio(priv, preamble, 1); - if (ret) - goto out; - - ret = lbs_associate(priv, assoc_req, CMD_802_11_ASSOCIATE); - /* If the association fails with current auth mode, let's - * try by changing the auth mode - */ - if ((priv->authtype_auto) && - (ret == WLAN_STATUS_NOT_SUPPORTED_AUTH_ALG) && - (assoc_req->secinfo.wep_enabled) && - (priv->connect_status != LBS_CONNECTED)) { - if (priv->secinfo.auth_mode == IW_AUTH_ALG_OPEN_SYSTEM) - priv->secinfo.auth_mode = IW_AUTH_ALG_SHARED_KEY; - else - priv->secinfo.auth_mode = IW_AUTH_ALG_OPEN_SYSTEM; - if (!assoc_helper_wep_keys(priv, assoc_req)) - ret = lbs_associate(priv, assoc_req, - CMD_802_11_ASSOCIATE); - } - - if (ret) - ret = -1; -out: - lbs_deb_leave_args(LBS_DEB_ASSOC, "ret %d", ret); - return ret; -} - -static int lbs_adhoc_post(struct lbs_private *priv, - struct cmd_ds_802_11_ad_hoc_result *resp) -{ - int ret = 0; - u16 command = le16_to_cpu(resp->hdr.command); - u16 result = le16_to_cpu(resp->hdr.result); - union iwreq_data wrqu; - struct bss_descriptor *bss; - DECLARE_SSID_BUF(ssid); - - lbs_deb_enter(LBS_DEB_JOIN); - - if (!priv->in_progress_assoc_req) { - lbs_deb_join("ADHOC_RESP: no in-progress association " - "request\n"); - ret = -1; - goto done; - } - bss = &priv->in_progress_assoc_req->bss; - - /* - * Join result code 0 --> SUCCESS - */ - if (result) { - lbs_deb_join("ADHOC_RESP: failed (result 0x%X)\n", result); - if (priv->connect_status == LBS_CONNECTED) - lbs_mac_event_disconnected(priv); - ret = -1; - goto done; - } - - /* Send a Media Connected event, according to the Spec */ - priv->connect_status = LBS_CONNECTED; - - if (command == CMD_RET(CMD_802_11_AD_HOC_START)) { - /* Update the created network descriptor with the new BSSID */ - memcpy(bss->bssid, resp->bssid, ETH_ALEN); - } - - /* Set the BSSID from the joined/started descriptor */ - memcpy(&priv->curbssparams.bssid, bss->bssid, ETH_ALEN); - - /* Set the new SSID to current SSID */ - memcpy(&priv->curbssparams.ssid, &bss->ssid, IEEE80211_MAX_SSID_LEN); - priv->curbssparams.ssid_len = bss->ssid_len; - - netif_carrier_on(priv->dev); - if (!priv->tx_pending_len) - netif_wake_queue(priv->dev); - - memset(&wrqu, 0, sizeof(wrqu)); - memcpy(wrqu.ap_addr.sa_data, priv->curbssparams.bssid, ETH_ALEN); - wrqu.ap_addr.sa_family = ARPHRD_ETHER; - wireless_send_event(priv->dev, SIOCGIWAP, &wrqu, NULL); - - lbs_deb_join("ADHOC_RESP: Joined/started '%s', BSSID %pM, channel %d\n", - print_ssid(ssid, bss->ssid, bss->ssid_len), - priv->curbssparams.bssid, - priv->channel); - -done: - lbs_deb_leave_args(LBS_DEB_JOIN, "ret %d", ret); - return ret; -} - -/** - * @brief Join an adhoc network found in a previous scan - * - * @param priv A pointer to struct lbs_private structure - * @param assoc_req The association request describing the BSS to join - * - * @return 0 on success, error on failure - */ -static int lbs_adhoc_join(struct lbs_private *priv, - struct assoc_request *assoc_req) -{ - struct cmd_ds_802_11_ad_hoc_join cmd; - struct bss_descriptor *bss = &assoc_req->bss; - u8 preamble = RADIO_PREAMBLE_LONG; - DECLARE_SSID_BUF(ssid); - u16 ratesize = 0; - int ret = 0; - - lbs_deb_enter(LBS_DEB_ASSOC); - - lbs_deb_join("current SSID '%s', ssid length %u\n", - print_ssid(ssid, priv->curbssparams.ssid, - priv->curbssparams.ssid_len), - priv->curbssparams.ssid_len); - lbs_deb_join("requested ssid '%s', ssid length %u\n", - print_ssid(ssid, bss->ssid, bss->ssid_len), - bss->ssid_len); - - /* check if the requested SSID is already joined */ - if (priv->curbssparams.ssid_len && - !lbs_ssid_cmp(priv->curbssparams.ssid, - priv->curbssparams.ssid_len, - bss->ssid, bss->ssid_len) && - (priv->mode == IW_MODE_ADHOC) && - (priv->connect_status == LBS_CONNECTED)) { - union iwreq_data wrqu; - - lbs_deb_join("ADHOC_J_CMD: New ad-hoc SSID is the same as " - "current, not attempting to re-join"); - |