diff options
Diffstat (limited to 'drivers/net/wireless/iwlegacy/iwl-dev.h')
-rw-r--r-- | drivers/net/wireless/iwlegacy/iwl-dev.h | 1426 |
1 files changed, 1426 insertions, 0 deletions
diff --git a/drivers/net/wireless/iwlegacy/iwl-dev.h b/drivers/net/wireless/iwlegacy/iwl-dev.h new file mode 100644 index 000000000000..25718cf9919a --- /dev/null +++ b/drivers/net/wireless/iwlegacy/iwl-dev.h @@ -0,0 +1,1426 @@ +/****************************************************************************** + * + * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * The full GNU General Public License is included in this distribution in the + * file called LICENSE. + * + * Contact Information: + * Intel Linux Wireless <ilw@linux.intel.com> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + *****************************************************************************/ +/* + * Please use this file (iwl-dev.h) for driver implementation definitions. + * Please use iwl-commands.h for uCode API definitions. + * Please use iwl-4965-hw.h for hardware-related definitions. + */ + +#ifndef __iwl_legacy_dev_h__ +#define __iwl_legacy_dev_h__ + +#include <linux/pci.h> /* for struct pci_device_id */ +#include <linux/kernel.h> +#include <linux/leds.h> +#include <linux/wait.h> +#include <net/ieee80211_radiotap.h> + +#include "iwl-eeprom.h" +#include "iwl-csr.h" +#include "iwl-prph.h" +#include "iwl-fh.h" +#include "iwl-debug.h" +#include "iwl-4965-hw.h" +#include "iwl-3945-hw.h" +#include "iwl-led.h" +#include "iwl-power.h" +#include "iwl-legacy-rs.h" + +struct iwl_tx_queue; + +/* CT-KILL constants */ +#define CT_KILL_THRESHOLD_LEGACY 110 /* in Celsius */ + +/* Default noise level to report when noise measurement is not available. + * This may be because we're: + * 1) Not associated (4965, no beacon statistics being sent to driver) + * 2) Scanning (noise measurement does not apply to associated channel) + * 3) Receiving CCK (3945 delivers noise info only for OFDM frames) + * Use default noise value of -127 ... this is below the range of measurable + * Rx dBm for either 3945 or 4965, so it can indicate "unmeasurable" to user. + * Also, -127 works better than 0 when averaging frames with/without + * noise info (e.g. averaging might be done in app); measured dBm values are + * always negative ... using a negative value as the default keeps all + * averages within an s8's (used in some apps) range of negative values. */ +#define IWL_NOISE_MEAS_NOT_AVAILABLE (-127) + +/* + * RTS threshold here is total size [2347] minus 4 FCS bytes + * Per spec: + * a value of 0 means RTS on all data/management packets + * a value > max MSDU size means no RTS + * else RTS for data/management frames where MPDU is larger + * than RTS value. + */ +#define DEFAULT_RTS_THRESHOLD 2347U +#define MIN_RTS_THRESHOLD 0U +#define MAX_RTS_THRESHOLD 2347U +#define MAX_MSDU_SIZE 2304U +#define MAX_MPDU_SIZE 2346U +#define DEFAULT_BEACON_INTERVAL 100U +#define DEFAULT_SHORT_RETRY_LIMIT 7U +#define DEFAULT_LONG_RETRY_LIMIT 4U + +struct iwl_rx_mem_buffer { + dma_addr_t page_dma; + struct page *page; + struct list_head list; +}; + +#define rxb_addr(r) page_address(r->page) + +/* defined below */ +struct iwl_device_cmd; + +struct iwl_cmd_meta { + /* only for SYNC commands, iff the reply skb is wanted */ + struct iwl_host_cmd *source; + /* + * only for ASYNC commands + * (which is somewhat stupid -- look at iwl-sta.c for instance + * which duplicates a bunch of code because the callback isn't + * invoked for SYNC commands, if it were and its result passed + * through it would be simpler...) + */ + void (*callback)(struct iwl_priv *priv, + struct iwl_device_cmd *cmd, + struct iwl_rx_packet *pkt); + + /* The CMD_SIZE_HUGE flag bit indicates that the command + * structure is stored at the end of the shared queue memory. */ + u32 flags; + + DEFINE_DMA_UNMAP_ADDR(mapping); + DEFINE_DMA_UNMAP_LEN(len); +}; + +/* + * Generic queue structure + * + * Contains common data for Rx and Tx queues + */ +struct iwl_queue { + int n_bd; /* number of BDs in this queue */ + int write_ptr; /* 1-st empty entry (index) host_w*/ + int read_ptr; /* last used entry (index) host_r*/ + /* use for monitoring and recovering the stuck queue */ + dma_addr_t dma_addr; /* physical addr for BD's */ + int n_window; /* safe queue window */ + u32 id; + int low_mark; /* low watermark, resume queue if free + * space more than this */ + int high_mark; /* high watermark, stop queue if free + * space less than this */ +} __packed; + +/* One for each TFD */ +struct iwl_tx_info { + struct sk_buff *skb; + struct iwl_rxon_context *ctx; +}; + +/** + * struct iwl_tx_queue - Tx Queue for DMA + * @q: generic Rx/Tx queue descriptor + * @bd: base of circular buffer of TFDs + * @cmd: array of command/TX buffer pointers + * @meta: array of meta data for each command/tx buffer + * @dma_addr_cmd: physical address of cmd/tx buffer array + * @txb: array of per-TFD driver data + * @time_stamp: time (in jiffies) of last read_ptr change + * @need_update: indicates need to update read/write index + * @sched_retry: indicates queue is high-throughput aggregation (HT AGG) enabled + * + * A Tx queue consists of circular buffer of BDs (a.k.a. TFDs, transmit frame + * descriptors) and required locking structures. + */ +#define TFD_TX_CMD_SLOTS 256 +#define TFD_CMD_SLOTS 32 + +struct iwl_tx_queue { + struct iwl_queue q; + void *tfds; + struct iwl_device_cmd **cmd; + struct iwl_cmd_meta *meta; + struct iwl_tx_info *txb; + unsigned long time_stamp; + u8 need_update; + u8 sched_retry; + u8 active; + u8 swq_id; +}; + +#define IWL_NUM_SCAN_RATES (2) + +struct iwl4965_channel_tgd_info { + u8 type; + s8 max_power; +}; + +struct iwl4965_channel_tgh_info { + s64 last_radar_time; +}; + +#define IWL4965_MAX_RATE (33) + +struct iwl3945_clip_group { + /* maximum power level to prevent clipping for each rate, derived by + * us from this band's saturation power in EEPROM */ + const s8 clip_powers[IWL_MAX_RATES]; +}; + +/* current Tx power values to use, one for each rate for each channel. + * requested power is limited by: + * -- regulatory EEPROM limits for this channel + * -- hardware capabilities (clip-powers) + * -- spectrum management + * -- user preference (e.g. iwconfig) + * when requested power is set, base power index must also be set. */ +struct iwl3945_channel_power_info { + struct iwl3945_tx_power tpc; /* actual radio and DSP gain settings */ + s8 power_table_index; /* actual (compenst'd) index into gain table */ + s8 base_power_index; /* gain index for power at factory temp. */ + s8 requested_power; /* power (dBm) requested for this chnl/rate */ +}; + +/* current scan Tx power values to use, one for each scan rate for each + * channel. */ +struct iwl3945_scan_power_info { + struct iwl3945_tx_power tpc; /* actual radio and DSP gain settings */ + s8 power_table_index; /* actual (compenst'd) index into gain table */ + s8 requested_power; /* scan pwr (dBm) requested for chnl/rate */ +}; + +/* + * One for each channel, holds all channel setup data + * Some of the fields (e.g. eeprom and flags/max_power_avg) are redundant + * with one another! + */ +struct iwl_channel_info { + struct iwl4965_channel_tgd_info tgd; + struct iwl4965_channel_tgh_info tgh; + struct iwl_eeprom_channel eeprom; /* EEPROM regulatory limit */ + struct iwl_eeprom_channel ht40_eeprom; /* EEPROM regulatory limit for + * HT40 channel */ + + u8 channel; /* channel number */ + u8 flags; /* flags copied from EEPROM */ + s8 max_power_avg; /* (dBm) regul. eeprom, normal Tx, any rate */ + s8 curr_txpow; /* (dBm) regulatory/spectrum/user (not h/w) limit */ + s8 min_power; /* always 0 */ + s8 scan_power; /* (dBm) regul. eeprom, direct scans, any rate */ + + u8 group_index; /* 0-4, maps channel to group1/2/3/4/5 */ + u8 band_index; /* 0-4, maps channel to band1/2/3/4/5 */ + enum ieee80211_band band; + + /* HT40 channel info */ + s8 ht40_max_power_avg; /* (dBm) regul. eeprom, normal Tx, any rate */ + u8 ht40_flags; /* flags copied from EEPROM */ + u8 ht40_extension_channel; /* HT_IE_EXT_CHANNEL_* */ + + /* Radio/DSP gain settings for each "normal" data Tx rate. + * These include, in addition to RF and DSP gain, a few fields for + * remembering/modifying gain settings (indexes). */ + struct iwl3945_channel_power_info power_info[IWL4965_MAX_RATE]; + + /* Radio/DSP gain settings for each scan rate, for directed scans. */ + struct iwl3945_scan_power_info scan_pwr_info[IWL_NUM_SCAN_RATES]; +}; + +#define IWL_TX_FIFO_BK 0 /* shared */ +#define IWL_TX_FIFO_BE 1 +#define IWL_TX_FIFO_VI 2 /* shared */ +#define IWL_TX_FIFO_VO 3 +#define IWL_TX_FIFO_UNUSED -1 + +/* Minimum number of queues. MAX_NUM is defined in hw specific files. + * Set the minimum to accommodate the 4 standard TX queues, 1 command + * queue, 2 (unused) HCCA queues, and 4 HT queues (one for each AC) */ +#define IWL_MIN_NUM_QUEUES 10 + +#define IWL_DEFAULT_CMD_QUEUE_NUM 4 + +#define IEEE80211_DATA_LEN 2304 +#define IEEE80211_4ADDR_LEN 30 +#define IEEE80211_HLEN (IEEE80211_4ADDR_LEN) +#define IEEE80211_FRAME_LEN (IEEE80211_DATA_LEN + IEEE80211_HLEN) + +struct iwl_frame { + union { + struct ieee80211_hdr frame; + struct iwl_tx_beacon_cmd beacon; + u8 raw[IEEE80211_FRAME_LEN]; + u8 cmd[360]; + } u; + struct list_head list; +}; + +#define SEQ_TO_SN(seq) (((seq) & IEEE80211_SCTL_SEQ) >> 4) +#define SN_TO_SEQ(ssn) (((ssn) << 4) & IEEE80211_SCTL_SEQ) +#define MAX_SN ((IEEE80211_SCTL_SEQ) >> 4) + +enum { + CMD_SYNC = 0, + CMD_SIZE_NORMAL = 0, + CMD_NO_SKB = 0, + CMD_SIZE_HUGE = (1 << 0), + CMD_ASYNC = (1 << 1), + CMD_WANT_SKB = (1 << 2), +}; + +#define DEF_CMD_PAYLOAD_SIZE 320 + +/** + * struct iwl_device_cmd + * + * For allocation of the command and tx queues, this establishes the overall + * size of the largest command we send to uCode, except for a scan command + * (which is relatively huge; space is allocated separately). + */ +struct iwl_device_cmd { + struct iwl_cmd_header hdr; /* uCode API */ + union { + u32 flags; + u8 val8; + u16 val16; + u32 val32; + struct iwl_tx_cmd tx; + u8 payload[DEF_CMD_PAYLOAD_SIZE]; + } __packed cmd; +} __packed; + +#define TFD_MAX_PAYLOAD_SIZE (sizeof(struct iwl_device_cmd)) + + +struct iwl_host_cmd { + const void *data; + unsigned long reply_page; + void (*callback)(struct iwl_priv *priv, + struct iwl_device_cmd *cmd, + struct iwl_rx_packet *pkt); + u32 flags; + u16 len; + u8 id; +}; + +#define SUP_RATE_11A_MAX_NUM_CHANNELS 8 +#define SUP_RATE_11B_MAX_NUM_CHANNELS 4 +#define SUP_RATE_11G_MAX_NUM_CHANNELS 12 + +/** + * struct iwl_rx_queue - Rx queue + * @bd: driver's pointer to buffer of receive buffer descriptors (rbd) + * @bd_dma: bus address of buffer of receive buffer descriptors (rbd) + * @read: Shared index to newest available Rx buffer + * @write: Shared index to oldest written Rx packet + * @free_count: Number of pre-allocated buffers in rx_free + * @rx_free: list of free SKBs for use + * @rx_used: List of Rx buffers with no SKB + * @need_update: flag to indicate we need to update read/write index + * @rb_stts: driver's pointer to receive buffer status + * @rb_stts_dma: bus address of receive buffer status + * + * NOTE: rx_free and rx_used are used as a FIFO for iwl_rx_mem_buffers + */ +struct iwl_rx_queue { + __le32 *bd; + dma_addr_t bd_dma; + struct iwl_rx_mem_buffer pool[RX_QUEUE_SIZE + RX_FREE_BUFFERS]; + struct iwl_rx_mem_buffer *queue[RX_QUEUE_SIZE]; + u32 read; + u32 write; + u32 free_count; + u32 write_actual; + struct list_head rx_free; + struct list_head rx_used; + int need_update; + struct iwl_rb_status *rb_stts; + dma_addr_t rb_stts_dma; + spinlock_t lock; +}; + +#define IWL_SUPPORTED_RATES_IE_LEN 8 + +#define MAX_TID_COUNT 9 + +#define IWL_INVALID_RATE 0xFF +#define IWL_INVALID_VALUE -1 + +/** + * struct iwl_ht_agg -- aggregation status while waiting for block-ack + * @txq_id: Tx queue used for Tx attempt + * @frame_count: # frames attempted by Tx command + * @wait_for_ba: Expect block-ack before next Tx reply + * @start_idx: Index of 1st Transmit Frame Descriptor (TFD) in Tx window + * @bitmap0: Low order bitmap, one bit for each frame pending ACK in Tx window + * @bitmap1: High order, one bit for each frame pending ACK in Tx window + * @rate_n_flags: Rate at which Tx was attempted + * + * If REPLY_TX indicates that aggregation was attempted, driver must wait + * for block ack (REPLY_COMPRESSED_BA). This struct stores tx reply info + * until block ack arrives. + */ +struct iwl_ht_agg { + u16 txq_id; + u16 frame_count; + u16 wait_for_ba; + u16 start_idx; + u64 bitmap; + u32 rate_n_flags; +#define IWL_AGG_OFF 0 +#define IWL_AGG_ON 1 +#define IWL_EMPTYING_HW_QUEUE_ADDBA 2 +#define IWL_EMPTYING_HW_QUEUE_DELBA 3 + u8 state; +}; + + +struct iwl_tid_data { + u16 seq_number; /* 4965 only */ + u16 tfds_in_queue; + struct iwl_ht_agg agg; +}; + +struct iwl_hw_key { + u32 cipher; + int keylen; + u8 keyidx; + u8 key[32]; +}; + +union iwl_ht_rate_supp { + u16 rates; + struct { + u8 siso_rate; + u8 mimo_rate; + }; +}; + +#define CFG_HT_RX_AMPDU_FACTOR_8K (0x0) +#define CFG_HT_RX_AMPDU_FACTOR_16K (0x1) +#define CFG_HT_RX_AMPDU_FACTOR_32K (0x2) +#define CFG_HT_RX_AMPDU_FACTOR_64K (0x3) +#define CFG_HT_RX_AMPDU_FACTOR_DEF CFG_HT_RX_AMPDU_FACTOR_64K +#define CFG_HT_RX_AMPDU_FACTOR_MAX CFG_HT_RX_AMPDU_FACTOR_64K +#define CFG_HT_RX_AMPDU_FACTOR_MIN CFG_HT_RX_AMPDU_FACTOR_8K + +/* + * Maximal MPDU density for TX aggregation + * 4 - 2us density + * 5 - 4us density + * 6 - 8us density + * 7 - 16us density + */ +#define CFG_HT_MPDU_DENSITY_2USEC (0x4) +#define CFG_HT_MPDU_DENSITY_4USEC (0x5) +#define CFG_HT_MPDU_DENSITY_8USEC (0x6) +#define CFG_HT_MPDU_DENSITY_16USEC (0x7) +#define CFG_HT_MPDU_DENSITY_DEF CFG_HT_MPDU_DENSITY_4USEC +#define CFG_HT_MPDU_DENSITY_MAX CFG_HT_MPDU_DENSITY_16USEC +#define CFG_HT_MPDU_DENSITY_MIN (0x1) + +struct iwl_ht_config { + bool single_chain_sufficient; + enum ieee80211_smps_mode smps; /* current smps mode */ +}; + +/* QoS structures */ +struct iwl_qos_info { + int qos_active; + struct iwl_qosparam_cmd def_qos_parm; +}; + +/* + * Structure should be accessed with sta_lock held. When station addition + * is in progress (IWL_STA_UCODE_INPROGRESS) it is possible to access only + * the commands (iwl_legacy_addsta_cmd and iwl_link_quality_cmd) without + * sta_lock held. + */ +struct iwl_station_entry { + struct iwl_legacy_addsta_cmd sta; + struct iwl_tid_data tid[MAX_TID_COUNT]; + u8 used, ctxid; + struct iwl_hw_key keyinfo; + struct iwl_link_quality_cmd *lq; +}; + +struct iwl_station_priv_common { + struct iwl_rxon_context *ctx; + u8 sta_id; +}; + +/* + * iwl_station_priv: Driver's private station information + * + * When mac80211 creates a station it reserves some space (hw->sta_data_size) + * in the structure for use by driver. This structure is places in that + * space. + * + * The common struct MUST be first because it is shared between + * 3945 and 4965! + */ +struct iwl_station_priv { + struct iwl_station_priv_common common; + struct iwl_lq_sta lq_sta; + atomic_t pending_frames; + bool client; + bool asleep; +}; + +/** + * struct iwl_vif_priv - driver's private per-interface information + * + * When mac80211 allocates a virtual interface, it can allocate + * space for us to put data into. + */ +struct iwl_vif_priv { + struct iwl_rxon_context *ctx; + u8 ibss_bssid_sta_id; +}; + +/* one for each uCode image (inst/data, boot/init/runtime) */ +struct fw_desc { + void *v_addr; /* access by driver */ + dma_addr_t p_addr; /* access by card's busmaster DMA */ + u32 len; /* bytes */ +}; + +/* uCode file layout */ +struct iwl_ucode_header { + __le32 ver; /* major/minor/API/serial */ + struct { + __le32 inst_size; /* bytes of runtime code */ + __le32 data_size; /* bytes of runtime data */ + __le32 init_size; /* bytes of init code */ + __le32 init_data_size; /* bytes of init data */ + __le32 boot_size; /* bytes of bootstrap code */ + u8 data[0]; /* in same order as sizes */ + } v1; +}; + +struct iwl4965_ibss_seq { + u8 mac[ETH_ALEN]; + u16 seq_num; + u16 frag_num; + unsigned long packet_time; + struct list_head list; +}; + +struct iwl_sensitivity_ranges { + u16 min_nrg_cck; + u16 max_nrg_cck; + + u16 nrg_th_cck; + u16 nrg_th_ofdm; + + u16 auto_corr_min_ofdm; + u16 auto_corr_min_ofdm_mrc; + u16 auto_corr_min_ofdm_x1; + u16 auto_corr_min_ofdm_mrc_x1; + + u16 auto_corr_max_ofdm; + u16 auto_corr_max_ofdm_mrc; + u16 auto_corr_max_ofdm_x1; + u16 auto_corr_max_ofdm_mrc_x1; + + u16 auto_corr_max_cck; + u16 auto_corr_max_cck_mrc; + u16 auto_corr_min_cck; + u16 auto_corr_min_cck_mrc; + + u16 barker_corr_th_min; + u16 barker_corr_th_min_mrc; + u16 nrg_th_cca; +}; + + +#define KELVIN_TO_CELSIUS(x) ((x)-273) +#define CELSIUS_TO_KELVIN(x) ((x)+273) + + +/** + * struct iwl_hw_params + * @max_txq_num: Max # Tx queues supported + * @dma_chnl_num: Number of Tx DMA/FIFO channels + * @scd_bc_tbls_size: size of scheduler byte count tables + * @tfd_size: TFD size + * @tx/rx_chains_num: Number of TX/RX chains + * @valid_tx/rx_ant: usable antennas + * @max_rxq_size: Max # Rx frames in Rx queue (must be power-of-2) + * @max_rxq_log: Log-base-2 of max_rxq_size + * @rx_page_order: Rx buffer page order + * @rx_wrt_ptr_reg: FH{39}_RSCSR_CHNL0_WPTR + * @max_stations: + * @ht40_channel: is 40MHz width possible in band 2.4 + * BIT(IEEE80211_BAND_5GHZ) BIT(IEEE80211_BAND_5GHZ) + * @sw_crypto: 0 for hw, 1 for sw + * @max_xxx_size: for ucode uses + * @ct_kill_threshold: temperature threshold + * @beacon_time_tsf_bits: number of valid tsf bits for beacon time + * @struct iwl_sensitivity_ranges: range of sensitivity values + */ +struct iwl_hw_params { + u8 max_txq_num; + u8 dma_chnl_num; + u16 scd_bc_tbls_size; + u32 tfd_size; + u8 tx_chains_num; + u8 rx_chains_num; + u8 valid_tx_ant; + u8 valid_rx_ant; + u16 max_rxq_size; + u16 max_rxq_log; + u32 rx_page_order; + u32 rx_wrt_ptr_reg; + u8 max_stations; + u8 ht40_channel; + u8 max_beacon_itrvl; /* in 1024 ms */ + u32 max_inst_size; + u32 max_data_size; + u32 max_bsm_size; + u32 ct_kill_threshold; /* value in hw-dependent units */ + u16 beacon_time_tsf_bits; + const struct iwl_sensitivity_ranges *sens; +}; + + +/****************************************************************************** + * + * Functions implemented in core module which are forward declared here + * for use by iwl-[4-5].c + * + * NOTE: The implementation of these functions are not hardware specific + * which is why they are in the core module files. + * + * Naming convention -- + * iwl_ <-- Is part of iwlwifi + * iwlXXXX_ <-- Hardware specific (implemented in iwl-XXXX.c for XXXX) + * iwl4965_bg_ <-- Called from work queue context + * iwl4965_mac_ <-- mac80211 callback + * + ****************************************************************************/ +extern void iwl4965_update_chain_flags(struct iwl_priv *priv); +extern const u8 iwl_bcast_addr[ETH_ALEN]; +extern int iwl_legacy_queue_space(const struct iwl_queue *q); +static inline int iwl_legacy_queue_used(const struct iwl_queue *q, int i) +{ + return q->write_ptr >= q->read_ptr ? + (i >= q->read_ptr && i < q->write_ptr) : + !(i < q->read_ptr && i >= q->write_ptr); +} + + +static inline u8 iwl_legacy_get_cmd_index(struct iwl_queue *q, u32 index, + int is_huge) +{ + /* + * This is for init calibration result and scan command which + * required buffer > TFD_MAX_PAYLOAD_SIZE, + * the big buffer at end of command array + */ + if (is_huge) + return q->n_window; /* must be power of 2 */ + + /* Otherwise, use normal size buffers */ + return index & (q->n_window - 1); +} + + +struct iwl_dma_ptr { + dma_addr_t dma; + void *addr; + size_t size; +}; + +#define IWL_OPERATION_MODE_AUTO 0 +#define IWL_OPERATION_MODE_HT_ONLY 1 +#define IWL_OPERATION_MODE_MIXED 2 +#define IWL_OPERATION_MODE_20MHZ 3 + +#define IWL_TX_CRC_SIZE 4 +#define IWL_TX_DELIMITER_SIZE 4 + +#define TX_POWER_IWL_ILLEGAL_VOLTAGE -10000 + +/* Sensitivity and chain noise calibration */ +#define INITIALIZATION_VALUE 0xFFFF +#define IWL4965_CAL_NUM_BEACONS 20 +#define IWL_CAL_NUM_BEACONS 16 +#define MAXIMUM_ALLOWED_PATHLOSS 15 + +#define CHAIN_NOISE_MAX_DELTA_GAIN_CODE 3 + +#define MAX_FA_OFDM 50 +#define MIN_FA_OFDM 5 +#define MAX_FA_CCK 50 +#define MIN_FA_CCK 5 + +#define AUTO_CORR_STEP_OFDM 1 + +#define AUTO_CORR_STEP_CCK 3 +#define AUTO_CORR_MAX_TH_CCK 160 + +#define NRG_DIFF 2 +#define NRG_STEP_CCK 2 +#define NRG_MARGIN 8 +#define MAX_NUMBER_CCK_NO_FA 100 + +#define AUTO_CORR_CCK_MIN_VAL_DEF (125) + +#define CHAIN_A 0 +#define CHAIN_B 1 +#define CHAIN_C 2 +#define CHAIN_NOISE_DELTA_GAIN_INIT_VAL 4 +#define ALL_BAND_FILTER 0xFF00 +#define IN_BAND_FILTER 0xFF +#define MIN_AVERAGE_NOISE_MAX_VALUE 0xFFFFFFFF + +#define NRG_NUM_PREV_STAT_L 20 +#define NUM_RX_CHAINS 3 + +enum iwl4965_false_alarm_state { + IWL_FA_TOO_MANY = 0, + IWL_FA_TOO_FEW = 1, + IWL_FA_GOOD_RANGE = 2, +}; + +enum iwl4965_chain_noise_state { + IWL_CHAIN_NOISE_ALIVE = 0, /* must be 0 */ + IWL_CHAIN_NOISE_ACCUMULATE, + IWL_CHAIN_NOISE_CALIBRATED, + IWL_CHAIN_NOISE_DONE, +}; + +enum iwl4965_calib_enabled_state { + IWL_CALIB_DISABLED = 0, /* must be 0 */ + IWL_CALIB_ENABLED = 1, +}; + +/* + * enum iwl_calib + * defines the order in which results of initial calibrations + * should be sent to the runtime uCode + */ +enum iwl_calib { + IWL_CALIB_MAX, +}; + +/* Opaque calibration results */ +struct iwl_calib_result { + void *buf; + size_t buf_len; +}; + +enum ucode_type { + UCODE_NONE = 0, + UCODE_INIT, + UCODE_RT +}; + +/* Sensitivity calib data */ +struct iwl_sensitivity_data { + u32 auto_corr_ofdm; + u32 auto_corr_ofdm_mrc; + u32 auto_corr_ofdm_x1; + u32 auto_corr_ofdm_mrc_x1; + u32 auto_corr_cck; + u32 auto_corr_cck_mrc; + + u32 last_bad_plcp_cnt_ofdm; + u32 last_fa_cnt_ofdm; + u32 last_bad_plcp_cnt_cck; + u32 last_fa_cnt_cck; + + u32 nrg_curr_state; + u32 nrg_prev_state; + u32 nrg_value[10]; + u8 nrg_silence_rssi[NRG_NUM_PREV_STAT_L]; + u32 nrg_silence_ref; + u32 nrg_energy_idx; + u32 nrg_silence_idx; + u32 nrg_th_cck; + s32 nrg_auto_corr_silence_diff; + u32 num_in_cck_no_fa; + u32 nrg_th_ofdm; + + u16 barker_corr_th_min; + u16 barker_corr_th_min_mrc; + u16 nrg_th_cca; +}; + +/* Chain noise (differential Rx gain) calib data */ +struct iwl_chain_noise_data { + u32 active_chains; + u32 chain_noise_a; + u32 chain_noise_b; + u32 chain_noise_c; + u32 chain_signal_a; + u32 chain_signal_b; + u32 chain_signal_c; + u16 beacon_count; + u8 disconn_array[NUM_RX_CHAINS]; + u8 delta_gain_code[NUM_RX_CHAINS]; + u8 radio_write; + u8 state; +}; + +#define EEPROM_SEM_TIMEOUT 10 /* milliseconds */ +#define EEPROM_SEM_RETRY_LIMIT 1000 /* number of attempts (not time) */ + +#define IWL_TRAFFIC_ENTRIES (256) +#define IWL_TRAFFIC_ENTRY_SIZE (64) + +enum { + MEASUREMENT_READY = (1 << 0), + MEASUREMENT_ACTIVE = (1 << 1), +}; + +/* interrupt statistics */ +struct isr_statistics { + u32 hw; + u32 sw; + u32 err_code; + u32 sch; + u32 alive; + u32 rfkill; + u32 ctkill; + u32 wakeup; + u32 rx; + u32 rx_handlers[REPLY_MAX]; + u32 tx; + u32 unhandled; +}; + +/* management statistics */ +enum iwl_mgmt_stats { + MANAGEMENT_ASSOC_REQ = 0, + MANAGEMENT_ASSOC_RESP, + MANAGEMENT_REASSOC_REQ, + MANAGEMENT_REASSOC_RESP, + MANAGEMENT_PROBE_REQ, + MANAGEMENT_PROBE_RESP, + MANAGEMENT_BEACON, + MANAGEMENT_ATIM, + MANAGEMENT_DISASSOC, + MANAGEMENT_AUTH, + MANAGEMENT_DEAUTH, + MANAGEMENT_ACTION, + MANAGEMENT_MAX, +}; +/* control statistics */ +enum iwl_ctrl_stats { + CONTROL_BACK_REQ = 0, + CONTROL_BACK, + CONTROL_PSPOLL, + CONTROL_RTS, + CONTROL_CTS, + CONTROL_ACK, + CONTROL_CFEND, + CONTROL_CFENDACK, + CONTROL_MAX, +}; + +struct traffic_stats { +#ifdef CONFIG_IWLWIFI_LEGACY_DEBUGFS + u32 mgmt[MANAGEMENT_MAX]; + u32 ctrl[CONTROL_MAX]; + u32 data_cnt; + u64 data_bytes; +#endif +}; + +/* + * iwl_switch_rxon: "channel switch" structure + * + * @ switch_in_progress: channel switch in progress + * @ channel: new channel + */ +struct iwl_switch_rxon { + bool switch_in_progress; + __le16 channel; +}; + +/* + * schedule the timer to wake up every UCODE_TRACE_PERIOD milliseconds + * to perform continuous uCode event logging operation if enabled + */ +#define UCODE_TRACE_PERIOD (100) + +/* + * iwl_event_log: current uCode event log position + * + * @ucode_trace: enable/disable ucode continuous trace timer + * @num_wraps: how many times the event buffer wraps + * @next_entry: the entry just before the next one that uCode would fill + * @non_wraps_count: counter for no wrap detected when dump ucode events + * @wraps_once_count: counter for wrap once detected when dump ucode events + * @wraps_more_count: counter for wrap more than once detected + * when dump ucode events + */ +struct iwl_event_log { + bool ucode_trace; + u32 num_wraps; + u32 next_entry; + int non_wraps_count; + int wraps_once_count; + int wraps_more_count; +}; + +/* + * host interrupt timeout value + * used with setting interrupt coalescing timer + * the CSR_INT_COALESCING is an 8 bit register in 32-usec unit + * + * default interrupt coalescing timer is 64 x 32 = 2048 usecs + * default interrupt coalescing calibration timer is 16 x 32 = 512 usecs + */ +#define IWL_HOST_INT_TIMEOUT_MAX (0xFF) +#define IWL_HOST_INT_TIMEOUT_DEF (0x40) +#define IWL_HOST_INT_TIMEOUT_MIN (0x0) +#define IWL_HOST_INT_CALIB_TIMEOUT_MAX (0xFF) +#define IWL_HOST_INT_CALIB_TIMEOUT_DEF (0x10) +#define IWL_HOST_INT_CALIB_TIMEOUT_MIN (0x0) + +/* + * This is the threshold value of plcp error rate per 100mSecs. It is + * used to set and check for the validity of plcp_delta. + */ +#define IWL_MAX_PLCP_ERR_THRESHOLD_MIN (1) +#define IWL_MAX_PLCP_ERR_THRESHOLD_DEF (50) +#define IWL_MAX_PLCP_ERR_LONG_THRESHOLD_DEF (100) +#define IWL_MAX_PLCP_ERR_EXT_LONG_THRESHOLD_DEF (200) +#define IWL_MAX_PLCP_ERR_THRESHOLD_MAX (255) +#define IWL_MAX_PLCP_ERR_THRESHOLD_DISABLE (0) + +#define IWL_DELAY_NEXT_FORCE_RF_RESET (HZ*3) +#define IWL_DELAY_NEXT_FORCE_FW_RELOAD (HZ*5) + +/* TX queue watchdog timeouts in mSecs */ +#define IWL_DEF_WD_TIMEOUT (2000) +#define IWL_LONG_WD_TIMEOUT (10000) +#define IWL_MAX_WD_TIMEOUT (120000) + +enum iwl_reset { + IWL_RF_RESET = 0, + IWL_FW_RESET, + IWL_MAX_FORCE_RESET, +}; + +struct iwl_force_reset { + int reset_request_count; + int reset_success_count; + int reset_reject_count; + unsigned long reset_duration; + unsigned long last_force_reset_jiffies; +}; + +/* extend beacon time format bit shifting */ +/* + * for _3945 devices + * bits 31:24 - extended + * bits 23:0 - interval + */ +#define IWL3945_EXT_BEACON_TIME_POS 24 +/* + * for _4965 devices + * bits 31:22 - extended + * bits 21:0 - interval + */ +#define IWL4965_EXT_BEACON_TIME_POS 22 + +enum iwl_rxon_context_id { + IWL_RXON_CTX_BSS, + + NUM_IWL_RXON_CTX +}; + +struct iwl_rxon_context { + struct ieee80211_vif *vif; + + const u8 *ac_to_fifo; + const u8 *ac_to_queue; + u8 mcast_queue; + + /* + * We could use the vif to indicate active, but we + * also need it to be active during disabling when + * we already removed the vif for type setting. + */ + bool always_active, is_active; + + bool ht_need_multiple_chains; + + enum iwl_rxon_context_id ctxid; + + u32 interface_modes, exclusive_interface_modes; + u8 unused_devtype, ap_devtype, ibss_devtype, station_devtype; + + /* + * We declare this const so it can only be + * changed via explicit cast within the + * routines that actually update the physical + * hardware. + */ + const struct iwl_legacy_rxon_cmd active; + struct iwl_legacy_rxon_cmd staging; + + struct iwl_rxon_time_cmd timing; + + struct iwl_qos_info qos_data; + + u8 bcast_sta_id, ap_sta_id; + + u8 rxon_cmd, rxon_assoc_cmd, rxon_timing_cmd; + u8 qos_cmd; + u8 wep_key_cmd; + + struct iwl_wep_key wep_keys[WEP_KEYS_MAX]; + u8 key_mapping_keys; + + __le32 station_flags; + + struct { + bool non_gf_sta_present; + u8 protection; + bool enabled, is_40mhz; + u8 extension_chan_offset; + } ht; +}; + +struct iwl_priv { + + /* ieee device used by generic ieee processing code */ + struct ieee80211_hw *hw; + struct ieee80211_channel *ieee_channels; + struct ieee80211_rate *ieee_rates; + struct iwl_cfg *cfg; + + /* temporary frame storage list */ + struct list_head free_frames; + int frames_count; + + enum ieee80211_band band; + int alloc_rxb_page; + + void (*rx_handlers[REPLY_MAX])(struct iwl_priv *priv, + struct iwl_rx_mem_buffer *rxb); + + struct ieee80211_supported_band bands[IEEE80211_NUM_BANDS]; + + /* spectrum measurement report caching */ + struct iwl_spectrum_notification measure_report; + u8 measurement_status; + + /* ucode beacon time */ + u32 ucode_beacon_time; + int missed_beacon_threshold; + + /* track IBSS manager (last beacon) status */ + u32 ibss_manager; + + /* storing the jiffies when the plcp error rate is received */ + unsigned long plcp_jiffies; + + /* force reset */ + struct iwl_force_reset force_reset[IWL_MAX_FORCE_RESET]; + + /* we allocate array of iwl_channel_info for NIC's valid channels. + * Access via channel # using indirect index array */ + struct iwl_channel_info *channel_info; /* channel info array */ + u8 channel_count; /* # of channels */ + + /* thermal calibration */ + s32 temperature; /* degrees Kelvin */ + s32 last_temperature; + + /* init calibration results */ + struct iwl_calib_result calib_results[IWL_CALIB_MAX]; + + /* Scan related variables */ + unsigned long scan_start; + unsigned long scan_start_tsf; + void *scan_cmd; + enum ieee80211_band scan_band; + struct cfg80211_scan_request *scan_request; + struct ieee80211_vif *scan_vif; + bool is_internal_short_scan; + u8 scan_tx_ant[IEEE80211_NUM_BANDS]; + u8 mgmt_tx_ant; + + /* spinlock */ + spinlock_t lock; /* protect general shared data */ + spinlock_t hcmd_lock; /* protect hcmd */ + spinlock_t reg_lock; /* protect hw register access */ + struct mutex mutex; + struct mutex sync_cmd_mutex; /* enable serialization of sync commands */ + + /* basic pci-network driver stuff */ + struct pci_dev *pci_dev; + + /* pci hardware address support */ + void __iomem *hw_base; + u32 hw_rev; + u32 hw_wa_rev; + u8 rev_id; + + /* microcode/device supports multiple contexts */ + u8 valid_contexts; + + /* command queue number */ + u8 cmd_queue; + + /* max number of station keys */ + u8 sta_key_max_num; + + /* EEPROM MAC addresses */ + struct mac_address addresses[1]; + + /* uCode images, save to reload in case of failure */ + int fw_index; /* firmware we're trying to load */ + u32 ucode_ver; /* version of ucode, copy of + iwl_ucode.ver */ + struct fw_desc ucode_code; /* runtime inst */ + struct fw_desc ucode_data; /* runtime data original */ + struct fw_desc ucode_data_backup; /* runtime data save/restore */ + struct fw_desc ucode_init; /* initialization inst */ + struct fw_desc ucode_init_data; /* initialization data */ + struct fw_desc ucode_boot; /* bootstrap inst */ + enum ucode_type ucode_type; + u8 ucode_write_complete; /* the image write is complete */ + char firmware_name[25]; + + struct iwl_rxon_context contexts[NUM_IWL_RXON_CTX]; + + struct iwl_switch_rxon switch_rxon; + + /* 1st responses from initialize and runtime uCode images. + * _4965's initialize alive response contains some calibration data. */ + struct iwl_init_alive_resp card_alive_init; + struct iwl_alive_resp card_alive; + + u16 active_rate; + + u8 start_calib; + struct iwl_sensitivity_data sensitivity_data; + struct iwl_chain_noise_data chain_noise_data; + __le16 sensitivity_tbl[HD_TABLE_SIZE]; + + struct iwl_ht_config current_ht_config; + + /* Rate scaling data */ + u8 retry_rate; + + wait_queue_head_t wait_command_queue; + + int activity_timer_active; + + /* Rx and Tx DMA processing queues */ + struct iwl_rx_queue rxq; + struct iwl_tx_queue *txq; + unsigned long txq_ctx_active_msk; + struct iwl_dma_ptr kw; /* keep warm address */ + struct iwl_dma_ptr scd_bc_tbls; + + u32 scd_base_addr; /* scheduler sram base address */ + + unsigned long status; + + /* counts mgmt, ctl, and data packets */ + struct traffic_stats tx_stats; + struct traffic_stats rx_stats; + + /* counts interrupts */ + struct isr_statistics isr_stats; + + struct iwl_power_mgr power_data; + + /* context information */ + u8 bssid[ETH_ALEN]; /* used only on 3945 but filled by core */ + + /* station table variables */ + + /* Note: if lock and sta_lock are needed, lock must be acquired first */ + spinlock_t sta_lock; + int num_stations; + struct iwl_station_entry stations[IWL_STATION_COUNT]; + unsigned long ucode_key_table; + + /* queue refcounts */ +#define IWL_MAX_HW_QUEUES 32 + unsigned long queue_stopped[BITS_TO_LONGS(IWL_MAX_HW_QUEUES)]; + /* for each AC */ + atomic_t queue_stop_count[4]; + + /* Indication if ieee80211_ops->open has been called */ + u8 is_open; + + u8 mac80211_registered; |