diff options
Diffstat (limited to 'drivers/net/wireless/brcm80211/brcmsmac/types.h')
-rw-r--r-- | drivers/net/wireless/brcm80211/brcmsmac/types.h | 352 |
1 files changed, 352 insertions, 0 deletions
diff --git a/drivers/net/wireless/brcm80211/brcmsmac/types.h b/drivers/net/wireless/brcm80211/brcmsmac/types.h new file mode 100644 index 000000000000..27a814b07462 --- /dev/null +++ b/drivers/net/wireless/brcm80211/brcmsmac/types.h @@ -0,0 +1,352 @@ +/* + * Copyright (c) 2010 Broadcom Corporation + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY + * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION + * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN + * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#ifndef _BRCM_TYPES_H_ +#define _BRCM_TYPES_H_ + +#include <linux/types.h> +#include <linux/io.h> + +#define WL_CHAN_FREQ_RANGE_2G 0 +#define WL_CHAN_FREQ_RANGE_5GL 1 +#define WL_CHAN_FREQ_RANGE_5GM 2 +#define WL_CHAN_FREQ_RANGE_5GH 3 + +/* boardflags */ + +/* Board has gpio 9 controlling the PA */ +#define BFL_PACTRL 0x00000002 +/* Not ok to power down the chip pll and oscillator */ +#define BFL_NOPLLDOWN 0x00000020 +/* Board supports the Front End Module */ +#define BFL_FEM 0x00000800 +/* Board has an external LNA in 2.4GHz band */ +#define BFL_EXTLNA 0x00001000 +/* Board has no PA */ +#define BFL_NOPA 0x00010000 +/* Power topology uses BUCKBOOST */ +#define BFL_BUCKBOOST 0x00200000 +/* Board has FEM and switch to share antenna w/ BT */ +#define BFL_FEM_BT 0x00400000 +/* Power topology doesn't use CBUCK */ +#define BFL_NOCBUCK 0x00800000 +/* Power topology uses PALDO */ +#define BFL_PALDO 0x02000000 +/* Board has an external LNA in 5GHz band */ +#define BFL_EXTLNA_5GHz 0x10000000 + +/* boardflags2 */ + +/* Board has an external rxbb regulator */ +#define BFL2_RXBB_INT_REG_DIS 0x00000001 +/* Flag to implement alternative A-band PLL settings */ +#define BFL2_APLL_WAR 0x00000002 +/* Board permits enabling TX Power Control */ +#define BFL2_TXPWRCTRL_EN 0x00000004 +/* Board supports the 2X4 diversity switch */ +#define BFL2_2X4_DIV 0x00000008 +/* Board supports 5G band power gain */ +#define BFL2_5G_PWRGAIN 0x00000010 +/* Board overrides ASPM and Clkreq settings */ +#define BFL2_PCIEWAR_OVR 0x00000020 +#define BFL2_LEGACY 0x00000080 +/* 4321mcm93 board uses Skyworks FEM */ +#define BFL2_SKWRKFEM_BRD 0x00000100 +/* Board has a WAR for clock-harmonic spurs */ +#define BFL2_SPUR_WAR 0x00000200 +/* Flag to narrow G-band PLL loop b/w */ +#define BFL2_GPLL_WAR 0x00000400 +/* Tx CCK pkts on Ant 0 only */ +#define BFL2_SINGLEANT_CCK 0x00001000 +/* WAR to reduce and avoid clock-harmonic spurs in 2G */ +#define BFL2_2G_SPUR_WAR 0x00002000 +/* Flag to widen G-band PLL loop b/w */ +#define BFL2_GPLL_WAR2 0x00010000 +#define BFL2_IPALVLSHIFT_3P3 0x00020000 +/* Use internal envelope detector for TX IQCAL */ +#define BFL2_INTERNDET_TXIQCAL 0x00040000 +/* Keep the buffered Xtal output from radio "ON". Most drivers will turn it + * off without this flag to save power. */ +#define BFL2_XTALBUFOUTEN 0x00080000 + +/* + * board specific GPIO assignment, gpio 0-3 are also customer-configurable + * led + */ + +/* bit 9 controls the PA on new 4306 boards */ +#define BOARD_GPIO_PACTRL 0x200 +#define BOARD_GPIO_12 0x1000 +#define BOARD_GPIO_13 0x2000 + +/* **** Core type/rev defaults **** */ +#define D11CONF 0x0fffffb0 /* Supported D11 revs: 4, 5, 7-27 + * also need to update wlc.h MAXCOREREV + */ + +#define NCONF 0x000001ff /* Supported nphy revs: + * 0 4321a0 + * 1 4321a1 + * 2 4321b0/b1/c0/c1 + * 3 4322a0 + * 4 4322a1 + * 5 4716a0 + * 6 43222a0, 43224a0 + * 7 43226a0 + * 8 5357a0, 43236a0 + */ + +#define LCNCONF 0x00000007 /* Supported lcnphy revs: + * 0 4313a0, 4336a0, 4330a0 + * 1 + * 2 4330a0 + */ + +#define SSLPNCONF 0x0000000f /* Supported sslpnphy revs: + * 0 4329a0/k0 + * 1 4329b0/4329C0 + * 2 4319a0 + * 3 5356a0 + */ + +/******************************************************************** + * Phy/Core Configuration. Defines macros to to check core phy/rev * + * compile-time configuration. Defines default core support. * + * ****************************************************************** + */ + +/* Basic macros to check a configuration bitmask */ + +#define CONF_HAS(config, val) ((config) & (1 << (val))) +#define CONF_MSK(config, mask) ((config) & (mask)) +#define MSK_RANGE(low, hi) ((1 << ((hi)+1)) - (1 << (low))) +#define CONF_RANGE(config, low, hi) (CONF_MSK(config, MSK_RANGE(low, high))) + +#define CONF_IS(config, val) ((config) == (1 << (val))) +#define CONF_GE(config, val) ((config) & (0-(1 << (val)))) +#define CONF_GT(config, val) ((config) & (0-2*(1 << (val)))) +#define CONF_LT(config, val) ((config) & ((1 << (val))-1)) +#define CONF_LE(config, val) ((config) & (2*(1 << (val))-1)) + +/* Wrappers for some of the above, specific to config constants */ + +#define NCONF_HAS(val) CONF_HAS(NCONF, val) +#define NCONF_MSK(mask) CONF_MSK(NCONF, mask) +#define NCONF_IS(val) CONF_IS(NCONF, val) +#define NCONF_GE(val) CONF_GE(NCONF, val) +#define NCONF_GT(val) CONF_GT(NCONF, val) +#define NCONF_LT(val) CONF_LT(NCONF, val) +#define NCONF_LE(val) CONF_LE(NCONF, val) + +#define LCNCONF_HAS(val) CONF_HAS(LCNCONF, val) +#define LCNCONF_MSK(mask) CONF_MSK(LCNCONF, mask) +#define LCNCONF_IS(val) CONF_IS(LCNCONF, val) +#define LCNCONF_GE(val) CONF_GE(LCNCONF, val) +#define LCNCONF_GT(val) CONF_GT(LCNCONF, val) +#define LCNCONF_LT(val) CONF_LT(LCNCONF, val) +#define LCNCONF_LE(val) CONF_LE(LCNCONF, val) + +#define D11CONF_HAS(val) CONF_HAS(D11CONF, val) +#define D11CONF_MSK(mask) CONF_MSK(D11CONF, mask) +#define D11CONF_IS(val) CONF_IS(D11CONF, val) +#define D11CONF_GE(val) CONF_GE(D11CONF, val) +#define D11CONF_GT(val) CONF_GT(D11CONF, val) +#define D11CONF_LT(val) CONF_LT(D11CONF, val) +#define D11CONF_LE(val) CONF_LE(D11CONF, val) + +#define PHYCONF_HAS(val) CONF_HAS(PHYTYPE, val) +#define PHYCONF_IS(val) CONF_IS(PHYTYPE, val) + +#define NREV_IS(var, val) \ + (NCONF_HAS(val) && (NCONF_IS(val) || ((var) == (val)))) + +#define NREV_GE(var, val) \ + (NCONF_GE(val) && (!NCONF_LT(val) || ((var) >= (val)))) + +#define NREV_GT(var, val) \ + (NCONF_GT(val) && (!NCONF_LE(val) || ((var) > (val)))) + +#define NREV_LT(var, val) \ + (NCONF_LT(val) && (!NCONF_GE(val) || ((var) < (val)))) + +#define NREV_LE(var, val) \ + (NCONF_LE(val) && (!NCONF_GT(val) || ((var) <= (val)))) + +#define LCNREV_IS(var, val) \ + (LCNCONF_HAS(val) && (LCNCONF_IS(val) || ((var) == (val)))) + +#define LCNREV_GE(var, val) \ + (LCNCONF_GE(val) && (!LCNCONF_LT(val) || ((var) >= (val)))) + +#define LCNREV_GT(var, val) \ + (LCNCONF_GT(val) && (!LCNCONF_LE(val) || ((var) > (val)))) + +#define LCNREV_LT(var, val) \ + (LCNCONF_LT(val) && (!LCNCONF_GE(val) || ((var) < (val)))) + +#define LCNREV_LE(var, val) \ + (LCNCONF_LE(val) && (!LCNCONF_GT(val) || ((var) <= (val)))) + +#define D11REV_IS(var, val) \ + (D11CONF_HAS(val) && (D11CONF_IS(val) || ((var) == (val)))) + +#define D11REV_GE(var, val) \ + (D11CONF_GE(val) && (!D11CONF_LT(val) || ((var) >= (val)))) + +#define D11REV_GT(var, val) \ + (D11CONF_GT(val) && (!D11CONF_LE(val) || ((var) > (val)))) + +#define D11REV_LT(var, val) \ + (D11CONF_LT(val) && (!D11CONF_GE(val) || ((var) < (val)))) + +#define D11REV_LE(var, val) \ + (D11CONF_LE(val) && (!D11CONF_GT(val) || ((var) <= (val)))) + +#define PHYTYPE_IS(var, val)\ + (PHYCONF_HAS(val) && (PHYCONF_IS(val) || ((var) == (val)))) + +/* Set up PHYTYPE automatically: (depends on PHY_TYPE_X, from d11.h) */ + +#define _PHYCONF_N (1 << PHY_TYPE_N) +#define _PHYCONF_LCN (1 << PHY_TYPE_LCN) +#define _PHYCONF_SSLPN (1 << PHY_TYPE_SSN) + +#define PHYTYPE (_PHYCONF_N | _PHYCONF_LCN | _PHYCONF_SSLPN) + +/* Utility macro to identify 802.11n (HT) capable PHYs */ +#define PHYTYPE_11N_CAP(phytype) \ + (PHYTYPE_IS(phytype, PHY_TYPE_N) || \ + PHYTYPE_IS(phytype, PHY_TYPE_LCN) || \ + PHYTYPE_IS(phytype, PHY_TYPE_SSN)) + +/* Last but not least: shorter wlc-specific var checks */ +#define BRCMS_ISNPHY(band) PHYTYPE_IS((band)->phytype, PHY_TYPE_N) +#define BRCMS_ISLCNPHY(band) PHYTYPE_IS((band)->phytype, PHY_TYPE_LCN) +#define BRCMS_ISSSLPNPHY(band) PHYTYPE_IS((band)->phytype, PHY_TYPE_SSN) + +#define BRCMS_PHY_11N_CAP(band) PHYTYPE_11N_CAP((band)->phytype) + +/********************************************************************** + * ------------- End of Core phy/rev configuration. ----------------- * + * ******************************************************************** + */ + +#define BCMMSG(dev, fmt, args...) \ +do { \ + if (brcm_msg_level & LOG_TRACE_VAL) \ + wiphy_err(dev, "%s: " fmt, __func__, ##args); \ +} while (0) + +/* + * Register access macros. + * + * These macro's take a pointer to the address to read as one of their + * arguments. The macro itself deduces the size of the IO transaction (u8, u16 + * or u32). Advantage of this approach in combination with using a struct to + * define the registers in a register block, is that access size and access + * location are defined in only one spot. This reduces the risk of the + * programmer trying to use an unsupported transaction size on a register. + * + */ + +#define R_REG(r) \ + ({ \ + __typeof(*(r)) __osl_v; \ + switch (sizeof(*(r))) { \ + case sizeof(u8): \ + __osl_v = readb((u8 __iomem *)(r)); \ + break; \ + case sizeof(u16): \ + __osl_v = readw((u16 __iomem *)(r)); \ + break; \ + case sizeof(u32): \ + __osl_v = readl((u32 __iomem *)(r)); \ + break; \ + } \ + __osl_v; \ + }) + +#define W_REG(r, v) do { \ + switch (sizeof(*(r))) { \ + case sizeof(u8): \ + writeb((u8)((v) & 0xFF), (u8 __iomem *)(r)); \ + break; \ + case sizeof(u16): \ + writew((u16)((v) & 0xFFFF), (u16 __iomem *)(r)); \ + break; \ + case sizeof(u32): \ + writel((u32)(v), (u32 __iomem *)(r)); \ + break; \ + } \ + } while (0) + +#ifdef CONFIG_BCM47XX +/* + * bcm4716 (which includes 4717 & 4718), plus 4706 on PCIe can reorder + * transactions. As a fix, a read after write is performed on certain places + * in the code. Older chips and the newer 5357 family don't require this fix. + */ +#define W_REG_FLUSH(r, v) ({ W_REG((r), (v)); (void)R_REG(r); }) +#else +#define W_REG_FLUSH(r, v) W_REG((r), (v)) +#endif /* CONFIG_BCM47XX */ + +#define AND_REG(r, v) W_REG((r), R_REG(r) & (v)) +#define OR_REG(r, v) W_REG((r), R_REG(r) | (v)) + +#define SET_REG(r, mask, val) \ + W_REG((r), ((R_REG(r) & ~(mask)) | (val))) + +/* multi-bool data type: set of bools, mbool is true if any is set */ + +/* set one bool */ +#define mboolset(mb, bit) ((mb) |= (bit)) +/* clear one bool */ +#define mboolclr(mb, bit) ((mb) &= ~(bit)) +/* true if one bool is set */ +#define mboolisset(mb, bit) (((mb) & (bit)) != 0) +#define mboolmaskset(mb, mask, val) ((mb) = (((mb) & ~(mask)) | (val))) + +#define CEIL(x, y) (((x) + ((y)-1)) / (y)) + +/* forward declarations */ +struct wiphy; +struct ieee80211_sta; +struct ieee80211_tx_queue_params; +struct brcms_info; +struct brcms_c_info; +struct brcms_hardware; +struct brcms_txq_info; +struct brcms_band; +struct dma_pub; +struct si_pub; +struct tx_status; +struct d11rxhdr; +struct txpwr_limits; + +/* iovar structure */ +struct brcmu_iovar { + const char *name; /* name for lookup and display */ + u16 varid; /* id for switch */ + u16 flags; /* driver-specific flag bits */ + u16 type; /* base type of argument */ + u16 minlen; /* min length for buffer vars */ +}; + +/* brcm_msg_level is a bit vector with defs in defs.h */ +extern u32 brcm_msg_level; + +#endif /* _BRCM_TYPES_H_ */ |