summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/ath/ath9k/ar9002_hw.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/ath/ath9k/ar9002_hw.c')
-rw-r--r--drivers/net/wireless/ath/ath9k/ar9002_hw.c109
1 files changed, 75 insertions, 34 deletions
diff --git a/drivers/net/wireless/ath/ath9k/ar9002_hw.c b/drivers/net/wireless/ath/ath9k/ar9002_hw.c
index a8a8cdc04afa..7ba9dd68cc05 100644
--- a/drivers/net/wireless/ath/ath9k/ar9002_hw.c
+++ b/drivers/net/wireless/ath/ath9k/ar9002_hw.c
@@ -18,6 +18,7 @@
#include "ar5008_initvals.h"
#include "ar9001_initvals.h"
#include "ar9002_initvals.h"
+#include "ar9002_phy.h"
/* General hardware code for the A5008/AR9001/AR9002 hadware families */
@@ -436,55 +437,84 @@ static void ar9002_hw_configpcipowersave(struct ath_hw *ah,
}
udelay(1000);
+ }
- /* set bit 19 to allow forcing of pcie core into L1 state */
- REG_SET_BIT(ah, AR_PCIE_PM_CTRL, AR_PCIE_PM_CTRL_ENA);
+ if (power_off) {
+ /* clear bit 19 to disable L1 */
+ REG_CLR_BIT(ah, AR_PCIE_PM_CTRL, AR_PCIE_PM_CTRL_ENA);
- /* Several PCIe massages to ensure proper behaviour */
+ val = REG_READ(ah, AR_WA);
+
+ /*
+ * Set PCIe workaround bits
+ * In AR9280 and AR9285, bit 14 in WA register (disable L1)
+ * should only be set when device enters D3 and be
+ * cleared when device comes back to D0.
+ */
+ if (ah->config.pcie_waen) {
+ if (ah->config.pcie_waen & AR_WA_D3_L1_DISABLE)
+ val |= AR_WA_D3_L1_DISABLE;
+ } else {
+ if (((AR_SREV_9285(ah) ||
+ AR_SREV_9271(ah) ||
+ AR_SREV_9287(ah)) &&
+ (AR9285_WA_DEFAULT & AR_WA_D3_L1_DISABLE)) ||
+ (AR_SREV_9280(ah) &&
+ (AR9280_WA_DEFAULT & AR_WA_D3_L1_DISABLE))) {
+ val |= AR_WA_D3_L1_DISABLE;
+ }
+ }
+
+ if (AR_SREV_9280(ah) || AR_SREV_9285(ah) || AR_SREV_9287(ah)) {
+ /*
+ * Disable bit 6 and 7 before entering D3 to
+ * prevent system hang.
+ */
+ val &= ~(AR_WA_BIT6 | AR_WA_BIT7);
+ }
+
+ if (AR_SREV_9285E_20(ah))
+ val |= AR_WA_BIT23;
+
+ REG_WRITE(ah, AR_WA, val);
+ } else {
if (ah->config.pcie_waen) {
val = ah->config.pcie_waen;
if (!power_off)
val &= (~AR_WA_D3_L1_DISABLE);
} else {
- if (AR_SREV_9285(ah) || AR_SREV_9271(ah) ||
+ if (AR_SREV_9285(ah) ||
+ AR_SREV_9271(ah) ||
AR_SREV_9287(ah)) {
val = AR9285_WA_DEFAULT;
if (!power_off)
val &= (~AR_WA_D3_L1_DISABLE);
- } else if (AR_SREV_9280(ah)) {
+ }
+ else if (AR_SREV_9280(ah)) {
/*
- * On AR9280 chips bit 22 of 0x4004 needs to be
- * set otherwise card may disappear.
+ * For AR9280 chips, bit 22 of 0x4004
+ * needs to be set.
*/
val = AR9280_WA_DEFAULT;
if (!power_off)
val &= (~AR_WA_D3_L1_DISABLE);
- } else
+ } else {
val = AR_WA_DEFAULT;
+ }
+ }
+
+ /* WAR for ASPM system hang */
+ if (AR_SREV_9280(ah) || AR_SREV_9285(ah) || AR_SREV_9287(ah)) {
+ val |= (AR_WA_BIT6 | AR_WA_BIT7);
}
+ if (AR_SREV_9285E_20(ah))
+ val |= AR_WA_BIT23;
+
REG_WRITE(ah, AR_WA, val);
- }
- if (power_off) {
- /*
- * Set PCIe workaround bits
- * bit 14 in WA register (disable L1) should only
- * be set when device enters D3 and be cleared
- * when device comes back to D0.
- */
- if (ah->config.pcie_waen) {
- if (ah->config.pcie_waen & AR_WA_D3_L1_DISABLE)
- REG_SET_BIT(ah, AR_WA, AR_WA_D3_L1_DISABLE);
- } else {
- if (((AR_SREV_9285(ah) || AR_SREV_9271(ah) ||
- AR_SREV_9287(ah)) &&
- (AR9285_WA_DEFAULT & AR_WA_D3_L1_DISABLE)) ||
- (AR_SREV_9280(ah) &&
- (AR9280_WA_DEFAULT & AR_WA_D3_L1_DISABLE))) {
- REG_SET_BIT(ah, AR_WA, AR_WA_D3_L1_DISABLE);
- }
- }
+ /* set bit 19 to allow forcing of pcie core into L1 state */
+ REG_SET_BIT(ah, AR_PCIE_PM_CTRL, AR_PCIE_PM_CTRL_ENA);
}
}
@@ -536,18 +566,29 @@ int ar9002_hw_rf_claim(struct ath_hw *ah)
return 0;
}
+void ar9002_hw_enable_async_fifo(struct ath_hw *ah)
+{
+ if (AR_SREV_9287_13_OR_LATER(ah)) {
+ REG_SET_BIT(ah, AR_MAC_PCU_ASYNC_FIFO_REG3,
+ AR_MAC_PCU_ASYNC_FIFO_REG3_DATAPATH_SEL);
+ REG_SET_BIT(ah, AR_PHY_MODE, AR_PHY_MODE_ASYNCFIFO);
+ REG_CLR_BIT(ah, AR_MAC_PCU_ASYNC_FIFO_REG3,
+ AR_MAC_PCU_ASYNC_FIFO_REG3_SOFT_RESET);
+ REG_SET_BIT(ah, AR_MAC_PCU_ASYNC_FIFO_REG3,
+ AR_MAC_PCU_ASYNC_FIFO_REG3_SOFT_RESET);
+ }
+}
+
/*
- * Enable ASYNC FIFO
- *
* If Async FIFO is enabled, the following counters change as MAC now runs
* at 117 Mhz instead of 88/44MHz when async FIFO is disabled.
*
* The values below tested for ht40 2 chain.
* Overwrite the delay/timeouts initialized in process ini.
*/
-void ar9002_hw_enable_async_fifo(struct ath_hw *ah)
+void ar9002_hw_update_async_fifo(struct ath_hw *ah)
{
- if (AR_SREV_9287_12_OR_LATER(ah)) {
+ if (AR_SREV_9287_13_OR_LATER(ah)) {
REG_WRITE(ah, AR_D_GBL_IFS_SIFS,
AR_D_GBL_IFS_SIFS_ASYNC_FIFO_DUR);
REG_WRITE(ah, AR_D_GBL_IFS_SLOT,
@@ -571,9 +612,9 @@ void ar9002_hw_enable_async_fifo(struct ath_hw *ah)
*/
void ar9002_hw_enable_wep_aggregation(struct ath_hw *ah)
{
- if (AR_SREV_9287_12_OR_LATER(ah)) {
+ if (AR_SREV_9287_13_OR_LATER(ah)) {
REG_SET_BIT(ah, AR_PCU_MISC_MODE2,
- AR_PCU_MISC_MODE2_ENABLE_AGGWEP);
+ AR_PCU_MISC_MODE2_ENABLE_AGGWEP);
}
}